Transports in XI and Client Proxies
Hi All,
I had to transport XI Contents from Dev to Qua.
I had 2 different SLD's.
so what do i need to transport in SLD? CR,LD,NR or All
I had created Proxies in $TMP package in sender system.
How do i transport them?
Thanks in Advance,
Sriram
Hi,
I had created Proxies in $TMP package in sender system.
How do i transport them?
U have to create a transport request number and u have to save ur changes into the request number then it can be transported.
Check some links on transporting using File and CMS,
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Regards,
Phani
Reward points if Helpful
Similar Messages
-
ABAP server and client proxies
Dear All,
what is the diff between ABAP server and client proxies?
Regards,
Ashish goyalHi Ashish,
Client proxy means proxy in Sender System, and Server Proxy means proxy in Receiver System.
Have a look to the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm">ABAP Proxy Runtime</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm">Programming with Client and Server Proxies</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Hope this help
Francesco -
What is Inbound Proxy and Outbound Proxies - Client and Serv please help ?
Hi Friends ,
<b> 1. What is exact meaning for Inbound Proxies and OutBound Proiex ?
2. Is outbound proxies means sending message to IS ?
3. Is Inbound proxies means receiving message from IS ?
4. Where exactly we need proxy ?
5. What is Sever and client Proxies ?
Is server ( here servre means XI Server ? )means Inbound .
Then normal meaning of Inbound is to from server right ? Then hwo it will bwecome as inbound ?</b>
I have gone through many blogs but still i am not clear .Please anyboy can expalin me ?
Regards .,
ShyamHi Shyam
1. What is exact meaning for Inbound Proxies and OutBound Proiex ?
2. Is outbound proxies means sending message to IS ?
3. Is Inbound proxies means receiving message from IS ?
Ans ::
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
How to integrate or Establish connection between SAP XI and BIW?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
4. Where exactly we need proxy ?
5. What is Sever and client Proxies ?
Ans ::
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Proxies: are interfaces which will get executed in the application system.They can be created only in the system from message interfaces using the proxy generation functions.
The biggest advantage of the proxy is that it always by passes the Adapter Engine and will directly interact with the application system and Integration engine - so it will and should give us a better performance.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages. The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with.
The Proxy currently has the following components available:
1. ABAP Proxy Communication using XI or Web Services
2. Java Proxy Communication using XI (J2EE)
JAVA Proxies:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
ABAP Proxies:
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Just refer these links u will get the answer of ur all 5 Question
<b>Pls reward if useful</b> -
ABAP Client proxies: extract data from the response and update Z table
Hi All,
I have following ABAP code for client proxies:
We have DT_Req, MT_Req, DT_Res, MT_Res and MI_Sync_OB (O/p Message: MT_Req, I/P message:MT_Res)
Proxy Objects generated:
ZCO_MI_SYNC_OB
ZMT_REQ
ZDT_REQ
ZDT_REQ_RECORDS
ZDT_REQ_RECORDS_TAB
ZMT_RES
ZDT_RES
ZDT_RES_RECORDS
ZDT_RES_RECORDS_TAB
ABAP Code:
REPORT ZTEST_DELETE.
DATA:
lo_history TYPE REF TO ZCO_MI_SYNC_OB,
lo_sys_exception TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE,
lv_history_res_mt TYPE ZMT_RES,
lv_history_req_rec TYPE ZDT_REQ_RECORDS,
lv_history_res_rec TYPE ZDT_RES_RECORDS.
lv_history_req_rec-VLAUE = SY-DATUM.
APPEND lv_history_req_rec TO lv_history_req_mt-MT_REQ-RECORDS.
CREATE OBJECT lo_history.
TRY.
Call outbound Proxy
CALL METHOD lo_history->execute_synchronous
EXPORTING
output = lv_history_req_mt
IMPORTING
<b>input = lv_history_res_mt.</b>
Error handling
CATCH cx_ai_system_fault INTO lo_sys_exception.
SKIP 2.
WRITE:/ lo_sys_exception->errortext.
RETURN.
ENDTRY.
<b>Now I have my response data in the internable "lv_history_res_mt-MT_REQ-RECORDS" which is deep structure.
How do I extract data records (multiple) from the above internal table and update to Z table??</b>
Thanx
NavinHi Navin,
go to SPROXY, flag structure and search for your table definition. You will find a table definition a field "line" or something, where you find the right structure. Create a new structure with DATA: myStructure type tableStructure. Define a second structure type with your Ztable. Next Loop at internal table into the structure. Inside that loop fill the Zstructure. Insert the Zstrucure (Press F1 on insert to have the syntax you need)
loop at internalTable into intStructure.
zstructure-myField = intStructure-myField.
INSERT ztable FROM zstructure.
endloop.
Regards,
Udo -
Abap proxies ( Client and Server proxies)
Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
RajHello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj -
How to create and configure proxies in ADF mobile using OWSM client agent?
Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
RajHi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj -
What is the defferent between client copy and client transport
what is the defferent between client copy and client transport?
give me the steps that how to make a applications data copy from production to QAS.
thanks
priyanHi,
what is the defferent between client copy and client transport?You better google it..!
here is the result..
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctscco/bcctscco.pdf
Follow the standard procedure of System Copy from PRD => QAS :
Download guide as per your release:
http://service.sap.com/systemcopy
What is Systemcopy:
http://help.sap.com/saphelp_rc10/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/frameset.htm
Regards; -
How can I transport data from one client to another client?
How can I transport data from one client to another client?
Regards,
Subhohmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2. -
Client proxies no longer work after R/3 upgrade to ECC5.0
Hi,
After the above upgrade where WAS of the R/3 systems went from 620 to 640 client side proxies no longer work.
To be able to use client proxies in 620 we had to use a plugin. But in 640 this should be native functionality, so no more plugin for this.
The error seems to lie in the connection from R/3 to XI. If I test the RFC connection that is defined in SXMB_ADM on R/3 I get the following error:
HTTPIO_PLG_ICM_CONNECT_FAILED-Fehlermeldung beim S
Message no. SR000
The IFR address is correctly defined.
The SPROX_CHECK_HTTP_COMMUNICATION test in sproxy-connection tests gives the following detailed info:
When calling the method
CL_HTTP_SERVER=>GET_EXTENSION_INFO
the exception
NO_HTTP_PING_SERVICE_FOUND
was triggered.
Does anyobe know how his can be solved?
Thanks
TomHI,
I think some problem with http destinations
Is your R3 system is configured as a Application system ?
Go to SXMB_ADM->Integration Engine Configuration->Check role of business system etc. and corresponding Integrtaion server
Check this guide page no-27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy -
Export/Import and Client Copy
Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
RajeshHello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar -
Transport an Appraisal and Objective Setting Template
Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
Scenario:
You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
Cause & Resolution:
The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
Happy transporting...
Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM>
A. Jimenez wrote:
> Hi Francois,
>
> I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
>
> You or anyone know how to transport this customization?
>
> Thanks in advance
Hi Abe,
what is the appraisal process you are talking about? The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document? if so SAP does not have a great straightforward solution, but they did provide us some options.
you can check out this thread and if you want I can send you the full document that is referred to in the post.
EP4: Performance Management-Flexible-Transporting the Tab & Process config -
How to send the transport request from one client to other client?
Hello Friends,
I have generated one transport request in one of the client in Development server.Now as it is customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
Thanking you guys in advance.
Regards,
JitendraHi Jitendra,
Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
Hope the above clarifies your query.
Regards,
Vivek
Edited by: Vivek on Mar 16, 2009 1:05 PM -
What exactly is the diff between client dependant and client independant te
Hi gurus,
What is the diff between client independant and client dependant term.. I initially had a confusion related to client independant and client dependant Transport requests, where else are these words applicable, do they apply to data as well, if so how? any links to help me understand the difference..
regards,
kishoreHi Kishore,
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
Regards,
Dinesh D -
CHARM error - No Target system for Normal transport generated from another client
Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salmanyes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change
-
ABAP Client proxies: structure/internal table error
Hi All,
We are getting following error when we check for errors in ABAP program for ABAP client proxies:
"RECORDS" is not an internal table - the "OCCURS n" specification is missing.
Let me explain the scenario and proxy objects its generated and proxy objects we are refering in program:
Its syncrounous client proxy scenario.
In XI:
We have DT_Req, MT_Req, DT_Res, MT_Res and MI_Sync_OB (O/p Message: MT_Req, I/P message:MT_Res)
Proxy Objects generated:
ZCO_MI_SYNC_OB
ZMT_REQ
ZDT_REQ
ZDT_REQ_RECORDS
ZMT_RES
ZDT_RES
ZDT_RES_RECORDS
ZDT_RES_RECORDS_TAB
ABAP Code:
REPORT ZTEST_DELETE.
DATA:
lo_history TYPE REF TO ZCO_MI_SYNC_OB,
lo_sys_exception TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE,
lv_history_res_mt TYPE ZMT_RES,
lv_history_req_rec TYPE ZDT_REQ_RECORDS,
lv_history_res_rec TYPE ZDT_RES_RECORDS.
lv_history_req_rec-VLAUE = SY-DATUM.
APPEND lv_history_req_rec TO lv_history_req_mt-MT_REQ-RECORDS.
CREATE OBJECT lo_history.
TRY.
Call outbound Proxy
CALL METHOD lo_history->execute_synchronous
EXPORTING
output = lv_history_req_mt
IMPORTING
input = lv_history_res_mt.
Error handling
CATCH cx_ai_system_fault INTO lo_sys_exception.
SKIP 2.
WRITE:/ lo_sys_exception->errortext.
RETURN.
ENDTRY.
When we execute this program we get following error:
"REC" is not an internal table - the "OCCURS n" specification is missing.
Can anybody please fogure out the why we getting this error??
We had the similar kind of scenario working. Only one difference in the proxy objects generated:
In working scenario we had the _TAB object genearated for the Req
In our current scenario _TAB proxy is generated for the Res.
Thanx
NavinHi Moorthy,
Everything you said is done. Still get the same error.
Hi Mario,
I tried to define with your example a, still I have problem.
I think I kind of figure out the reason.
As I mentioned in the first post (question), proxy object "ZDT_RES_RECORDS_TAB" has created for the object data type DT_RES. The fields in the data type "DT_RES" are already existing in the SAP.
The fields in the data type DT_REQ are not in the SAP, and in the proxy objects its not generated any kind of TABLE. I think this is the reason we are getting error ""RECORDS" is not an internal table - the "OCCURS n" specification is missing." either we define
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE, OR
lv_history_req_mt TYPE ZMT_REQ,
Does it make sense what I was explaining above???
Any lead on this would be great.
Thanx
Navin
Maybe you are looking for
-
I don't know how to program my DVR to edit out the commercial​s
Does anyone know how to program the DVR not to record the commercials? Its not a problem on public television, of course.
-
HP PRESARIO CQ61-210SQ NOTEBOOK-NO LED LIGHTS,NO START.
Halllo i have big problem,my HPresario does not have any lights ,and when i want to push it- nothing....only the light ,who is next to to the power corde is lighting.No screen no led lights .nothing...What to looking for,i don not now,i think it is n
-
I just purchased a one year old iMac. How do I create a brand new admin account?
I just purchased a one year old iMac. How do I create a brand new admin account?
-
I just downloaded the software and I am lost I don't know how to do anything. I can't figure out how to open the program or insert photos or do anything. There isn't anything that tells me how to get the pictures in the program that I can see
-
If my system currently has CS4 and designs have been created with CS4, will I be able to modify those designs with Creative Cloud? Also, If I upgrade to Creative Cloud, should I uninstall CS4 to make more space on my computer?