Transports in XI using CMS, assembly issue

Hi all,
We have a 3 system landscape of XI . We have JDI configured in D system.
Currently we are using CMS transports from D to Q and file system transports from Q to P. We have planned to use CMS transports from Q to P also instead of file system transports.
In that process, when we selected a particular software component in the assembly tab, and selected assemble component, we noticed that all the software compoents assembly is running, which are present in the assembly queue.
Is there any procedure to stop the assembly for all the software components?
Thanks.

Transporting Objects
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm --> Configuring Groups and Transport Targets

Similar Messages

LSADMIN CMS authorization problem - How To Transport XI Content Using CMS

We are configuring CMS using the "How To Transport XI Content Using CMS". For the LSADMIN user we have added the SAP_XI_CMS_SERV_USER and SAP_SLD_ORGANIZER roles. We have followed all of the steps in the guide.
The problem we are encountering is that when we define the domain but put in the LSADMIN as the user, we get an error - "SLD (URL http://server:50000) server exception: HTTP response code: 403 Forbidden"
We then gave the LSADMIN all of the roles of XISUPER and restarted the J2EE engine. We still have the same problem. So we changed the CMS User to be XISUPER and we could save the domain. Now, we have another problem - when we try to export from dev using CMS, we get the following problem:
"Sent on 3/9/06 at 1:26 PM: Unable to establish connection to CMS server http://servername:50000. Unable to transfer the following transport lists: Export list for ...
Details: unknown exception: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: version=0,dtrWSName=
Check the availability of the CMS and the user authorizations and send the transport request again if necessary
We are on SP16. Anyone encountered this issue?
Regards,
Jay

Here are all of roles we have given LSADMIN in client 100:
SAP_CMS_ADMINISTRATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_CMS_SERV_USER
SAP_XI_CMS_SERV_USER
SAP_XI_DEMOAPP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
But on the J2EE side, we only see the following roles for LSADMIN:
- Authenticated Users Built-in Group Authenticated Users
- Everyone Built-in Group Everyone
- SAP_XI_CMS_SERV_USER Exchange Infrastructure: Change Management Service User
I checked client 000, and noticed that LSADMIN only had the SAP_XI_CMS_SERV_USER. So this the problem. I added all of the roles to LSADMIN in client 000 and restarted J2EE and now i can see all of the roles under the LSADMIN user in UME.
We noticed the problem that our UME configuration was pointing to client 000 and not client 100. If we go to Visual administrator and go to the Services->UME Provider, we see that - ume.r3.connection.master.client points to client 000. We will need to change this.
That was the issue. UME was pointing to the wrong ABAP client. I appreciate all of your help.
Regards,
Jay

CMS Assembly issue

Hi Friends,
Last week, We were having CMS issues in assembly step, while transporting IR objects from XIQ to XIP. Some of the SWCVs were in the failed state. We deleted the tracks corresponding to these SWCVs. That way we deleted all the pending transport requests from the queue of these SWCVs. Then we created the tracks again for these SWCVs and started with a clean state. Now, when I try to export on namespace from XIQ to XIP, it is not doing anything on the assembly tab. Means, In the assemble components window, If I select 'subset assembly' and select my change request and hit assemble. It does not assemble and the SWCV still shows the status 'waiting for assembly. If I don't select 'subset assembly' , then it assembles the SWCV. That means I am not able to assemble individual change request and I will have to assemble the entire SWCV, and I don't want that. Please advise what can be the reason for 'subset assembly' not working.
Thanks,
Rajesh

Transporting Objects
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm --> Configuring Groups and Transport Targets

Transport using CMS between Dev, Qual and Prod

Hi,
I'm a little bit curios if there are others out there using CMS for transport in a XI production line -
Dev -> Qual -> Prod.
My company is using it, and it seems to me that at consolidation stage, you can only select transports related to a SWCV and NOT select transports individually or related to a namespace?
Anyone?
Our version is XI 3.0 SP14 latest patch.
best regards
Torstein Nesby

Hi Torstein,
I saw your other threads related to this as well as your thoughts on 'Quality Feedback' (which I agree with btw). It sounds like you may have been able to come to a resolution to a problem that continues to cause me issues. Can you review and provide some guidance on the following please?
Current Environment / Setup:
- XI 3.0 system, SP12
- Single SLD with appropriate Group / transport Targets setup
- Single IR Track, Single ID Track
- CMS usage for transports. Successful from Dev to QA, QA to Prod has not yet been attempted.
- SWCV are setup in IR and are specific to tech system / product. For example there is a SWCV for Peoplesoft where all related message / data types for Peoplesoft are located. There is another SWCV for SAP, another for Oracle, etc.
- Message Mappings and Interface Mappings are created in the target SWCV. This means that a single interface will normally consist of 2 SWCV to be migrated.
- Currently migrations are bundled in Transport (export) lists vs change lists when migrated out of the Dev environment
- As an aside, I understand the approach of effectively setting up a SWCV per interface with Usage dependencies across SWCV's for reuse of data / message types, however this is the architecture that was recommended at the start of development for this first release.
What I am attempting:
- In the Assemble tab in the transport Studio I want to be able to use a 'Subset Assembly' option to selectively choose which transport / change lists to allow to go to production.
- Based on reading the SAP Help in the XI system, numerous SDN Posts, the SAP docs "Using CMS for XI 3.0" and "How to Transport XI Content Using CMS" it appears this option should be readily available for both the IR AND ID.
Issue:
- For both the IR and ID when I go to the Assembly tab and get the subsequent popup (after "Assemble Components") the "Subset Assembly" option is not visible. Supposedly when going to this Assembly tab, selecting a specific SWCV (not the default 'All Components' option), and choosing "Assemble Components" generates a popup with a checkbox listed for "Subset Assembly". I get the popup in both the IR and ID but the "Subset Assembly" checkbox is not part of the window.
The docs are somewhat unclear in this area. It alludes to seeing this option after the initial migration to Prod is done (which again we have not done yet), but only mentions this in the context of the ID. Another doc alludes to seeing Emergency Transports created in CONS (QA) as if that may be a pre-req to having that option, but is a weak reference.
Can you advise on:
1) Do you see the "Subset Assembly" option in the popup?
2) If so:
a) Did you see it prior to the inital migration to Prod?
b) Do you see it for both the Directory and Repository in the Transport Studio Assembly?
3) Any other thoughts on why I'm encountering this issue?
Thanks for your help!
Darin

Problem in Transport of ID objects using CMS

Hi,
I am using CMS to transport my IR and ID objects from DEV->QA->PROD.
While I am able to transport my repository objects successfully,I do have a problem with trnasport of ID objects.Especially this problem seem to exist only if i try to export individual objects.There isnt any issue for a complete ID transfer which is not my req.
When doing "Release FOr tranpsort" from QA after making the communication channels changes,The object appears in the "assemble " tab.
Ideally Once I assemble the objects,it should diasappear out of assembly page and should be appearing in the "Approval" tab..
But the objects successfully get assembled and dispapper from assembly ,they dont seem to be present in the next approval step.I am unable to track where they are lost.CMS logs doesnt show any error as well.
Any pointers from this issue?
Regards,
Rashmi

Hi,
This will help you,
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards
Agasthuri Doss

Reg:: Error while XI Transport Using CMS

Hi! SAP Gurus,
I am trying to transport XI Integration Design and Configuration Objects from X42 (DEV) to X44 (Quality).
I want to transport Transport ID Design:5909a730a2fe11dcc8dd001125e7370c
Configuration: 1c3d0c90a30111dcb2c0001125e7370c
I was succefully transported the Design object but while I am transporting the Configuratio Object at First I am moving from X42- CMS and then from CMS-X44.
ERROR 1 :: But once I am Exporting I am getting an acknowledgement message and finally it was moving to CMS. But there in Consolidation TAB it was coming IMPORT FAILED.
But when I tried 6-7 times I sended it successfully and there that objects first went (sits) directly in Change lists of quality server ID Part. From change lists I am transferring to Scenarios by Right clickTransport.
ERROR 2: According to CMS some parameters will be lost in communication channels and in some other objects. while transporting using CMS.
How to recollect that parameters again ?
Will you please confirm simply copying the parameters from Development server and again editing or Is there any other method?
ERROR 3:. While I am activating any object in Configuration object I am getting the error

Unable to move object. Change lists were not part of the same import
Kindly Solve this issue and If Possible send me a brief note and complete procedure of
HOW TO TRANSPORT XI REPOSITORY AND CONFIGURATION OBJECTS USING CMS FROM DEVQAPROD SERVERS?
Hi! Gurus,
My Main Problem is :::
After Exporting from DEV---->CMS---->Quality it will goes to Change Lists of Quality Server QA and after that I am transferring them to Scenarios TAB by Right Clicking --> and Press Transfer..
Problem::: After that When ever I am trying to activate they are not activating I am getting the error::

Unable to move object. Change lists were not part of the same import

Hi! Gurus,
If you have any material with screen shots and also the solution to the above problem kindly send to my Mail ID::[email protected]
Thanks::
Amar Srinivas Eli.

Error when transporting using CMS

Hi,
Please ssist.
We are on PI 7.0 SP17. We want to transport using CMS from Dev box to Prod system. We get to export steps. Select Mode, able to go pass, Then Select Objects We select them and Click on Finish(at bottom of pop-up screen). "correct mark"Then We get Transport Using CMS. Trnsport request generated and released for transport using CMS, Shoose Tools-> System Messages to display result. Then after a few minutes the screen pops a long message.
"Sent on 11/18/09 at 10:39 AM: CMS (server: http://server:port) cannot export the following transport lists:
Export list (send time = 11/18/09 10:39 AM, component = Default Software Component, ID = e10bf190d41d11dead8f00096bdd826a)
Details: com.sap.aii.util.misc.api.BaseRuntimeException: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line -1, column -1. Details:
Message: Generic Exception:
Stacktrace: com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: -> com.sap.aii.util.misc.api.BaseRuntimeException: Parsing generic data instance: begin of unexpected element "html"!"
Regards
Scharlotte

Check if it is a password-related issu as mentioned here: Error when defining Xi-track in CMS
Regards,
Abhishek.

Could not see Transport using CMS in Integration Directory

Hi,
I have Changed the Parameter setting to true in Integration Builder for Integration Directory and Integration Repository. When i login into Integration Directory i cannot see the option Transport using CMS in Export. I can only see Transport using File system.
Please help me out in configuring the CMS correctly.
Thanks,
Fahad

Hi Fahad,
This thread answers ur question
CMS Transport mode unavailable in Integration Directory
cheers,
Prashanth
P.S Please mark helpful answers

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

Transport using CMS Export Error on Integration Repository

Hello
We are transporting an maximo-integrate,max60-ERP2004 via export mode
Transport using CMS. Got an error during export. The error says :
"Workspace was not defined for software component version Maximo-
Integrate,MAX60-SAPERP2004 of mro.com
Assign the software component version in the landscape configurator of
the change management service to a track."
As already software component version Maximo in the landscape
configurator of the change management service to a track has been
defined.
The Software component (SWCV) has already been defined on CMS. But still getting the error.
Please advise anybody comes across these type of error.
Thanks & regards
AK

Thanks sumit for reply. Here is the information:
Yes I choose Repository Type : XI
Track ID : IR.ERP
Track Name : IR.ERP
Track Description : ERP System : XI Integration Repository Objects
XI URL Development : http://sap03.ab.energy:50000/rep/
XI URL Consolidation System : http://sap03.ab.energy:50100/rep/
Because we have 2 system landscape.
ADD SWCV
MAXIMO-INTEGRATE mro.com MAX60-SAPERP2004 Source
But on Domain Data:
CMS Name : XID
CMS Description : XID
CMS URL : http://sap03.ab.energy:50000
CMS USER : LSADMIN
CMS Password : XXXXX
Domain ID:XID
Domain Name:XID
Domain Description:XID
SLD URL:http://sap03.ab.energy:50000
All the information is correct. Above thread is not suitable.Then Why I am getting the error message.
Please advise..
Thanks & regards
Sanjay

"Transport using CMS" option does not appear

Hello Guys
I use CMS for transporting, and it works fine! But today I created a new SWCV, created a Track on CMS to this SWCV too. But when I choose "Export" on IR, the screen that appers does not show the "Transport using CMS" option. Only the "Transporte using File System" option is available for this SWCV.
Any idea?
Thanks in advance
Julio

Hi (and thanks for answering)
The SWCV is in http://host:port/rep/support/admin/index.html, but its name is "Not available"
I did update my domain, but it didnt work at all (the name of the SWCV still is "Not available" and the "Transport using CMS" option didnt appear in IR).
Julio

Exception in CMS when transporting the Components in the assembly stage

Hi,
I am getting the following exception in CMS when transporting the Components in the assembly stage:
com.sap.cms.tcs.interfaces.exceptions.TCSFileCreateException: cannot create file:*****.sca Error adding file *****/pr_deployarchivedr/TestDc.sda to archive.
File was already added before.
Any pointers to resolve the exception will be helpful.
Regards.
Rajat

Hi Rajat,
two things causes this type of error.
1) Check whether the systems are in SYNC or not(patch level, versions).
2)Check whether the dependencies are transported or not to assemble tab.
Regards,
Anil.

Revert back the transports done using CMS

Hi.
Please let me know how to revert back the transports that are done using CMS.
If once the transport of the namespace has been done from DEV to CONS, can we revert back the transport so that the CONS system will have only those objects that it had before the transport.
I've gone through help.sap.com and some of the forums here regarding transports, but couldn't find the solution.
Please help me out in this regard.
Thanks,
Manohar.

Hi,
It is not possbile revert back the changes that are done using CMS. There is a scope to redo these changes at Oracle database level by redo logs but it is not at all suggestible as it may lead to inconsistencies.
Thanks,
Vijay Kumar T.

Error while subscription on SSRS report that uses custom assembly

I am new to SSRS. i have created a report that uses custom assembly that runs an oracle procedure and bring back result to report. this works fine on sharepoint mode interactive report. while i subscribe the same report, i am getting below error
Request for the permission of type 'System.Data.OracleClient.OraclePermission,System.Data.OracleClient,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b77a5c561934e089'failed. < ==>
at System.Security.CodeAccessSecurityEngine.Check(Objectdemand,StackCrawlMark&stackMark, BooleanisPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnectionouterConnection,DbConnectionFactoryconnectionFactory)
at System.Data.OracleClient.OracleConnection.Open()
i am breaking my head to find the root cause and fix for this.
i tried adding below permission on server machine.config file,
<SecurityClass Name="OraclePermission" Description="System.Data.OracleClient.OraclePermission, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<PermissionSet class="NamedPermissionSet" version="1" Unrestricted="true" Name="FullTrust" Description="Allows full access to all resources for custom assembly">
<IPermission class="OraclePermission" version="1" Unrestricted="true" Level="High" Flags="FullTrust"/>
</PermissionSet>
it doesnot work and i am getting the same error on subscription.
can anyone help me to solve this issue. this is very urgent. thanks

Can you see data for Custom object @ BEx level??
YES, then just try to re-create the same variable and Save the BW query.
Now do View - refresh Strusture @ Universe. And you can see Filter for the same, just Parse it, just whether it is OK or not.
OK -- then Export the Universe and create WebI reports, this will come as Prompt.
Hope it will helps you.
Thank You!!
Sent from iPhone

XI - Transport of ID via CMS / Business System Replacement

Dear Experts,
We have installed SAP XI, and we now have our QA environment installed. We are transporting our objects from DEV to QA through CMS.
In the SLD, we have defined 2 business systems : SAP_R3_DEV and SAP_R3_QA. Each of this system is assigned to a group (DEV_GRP and QA_GRP). We have added dependencies in the "Transport" section of the business systems (i.e. SAP_R3_DEV becomes SAP_R3_QA when transporting).
So, everything seems to be configured.
Now, we are transporting objects from the Integration Directory using CMS / Transport Studio. My understanding was that occurences of "SAP_R3_DEV" should be replaced by "SAP_R3_QA", but this is not working.
Where am I wrong ?
Our configuration :
XI 3.0 - Netweaver 2004s SP10
We have 3 different SLDs (DEV, QA and PRD)

Your help would be greatly appreciated !
Regards,

Here are more details...
We have multiple SLDs : One for DEV, one for QA and one for PROD environments.
We do all the configuration in the DEV SLD, and then use Export / Import functionality to replicate data in QA / PROD environments. We did also a full SLD Export / Import in case something was missing.
In many forums / blogs, it's indicated we should go in SLD, under "Business Landscape" on the first screen, and under the Business System we can find the "Transport Target" field.
In our version of XI, which is 2004s SP10, we must go in SLD, under "Business Systems" on the first screen, and under the Business System we have a "Transport" tab in which we must indicate both a "Target Group" and a "Target System".
We have created an XI_DEV group and assigned business systems SAP_R3_DEV and SAP_XI_DEV
to it.
We have also created an XI_QA group and assigned business systems SAP_R3_QA and SAP_XI_QA to it.
In the "Transport" tab, we have configured XI_QA / SAP_R3_QA as the transport target for SAP_R3_DEV.
In the Integration Repository, we do our configuration using Business System SAP_R3_DEV.
When transporting, we tried both CMS and Export/Import methods. However, when importing in XI QA, we still see SAP_R3_DEV instead of SAP_R3_QA...
I hope this clarifies )
Thanks a lot for your time !

Transports in XI using CMS, assembly issue

Similar Messages

Maybe you are looking for