Transports not visible after CTS+ Deploy
Hi,
We have configured CTS+ in our XI landscape. The XI objects are succesfully getting transported to QA from Dev and when transporting from QA to PRD the deployment is happening without errors but we are not able see those transports in the PRD.
Transport log is has no errors and it is calling the right system.
Here with attaching the transport log
Log File:
devsappi.abbgrain.local\sapmnt\trans\log\DPXT900068.PTX
3T ######################################
Deployment
Transport request : DPXK900068
System : PTX
tp path : tp
Version and release: 372.04.10 700
3T CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy web service destination = CTSDEPLOY
Directory =
devsappi.abbgrain.local\sapmnt\trans\data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://prodsappi.abbgrain.local:53000
Double-stack system PTX
Deploy for XID
Deploy File = 5df706c0307511dd9b0e005056b9061c
Start of Web Service Log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://prodsappi.abbgrain.local:53000/dir
CommunicationData-Host:prodsappi.abbgrain.local
CommunicationData-Port:53000
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:
devsappi.abbgrain.local\sapmnt\trans\data/DPXK900068/5df706c0307511dd9b0e005056b9061
>>>c
Importing archive:
devsappi.abbgrain.local\sapmnt\trans\data/DPXK900068/5df706c0307511dd9b0e005056b
>>>9061c
Import finished sucessfully
End of Web Service Log
Return Code = 0
Highest Return Code = 0
Deployment
End date and time : 20080714174834
Ended with return code: ===> 0 <===
Please suggest what could be the problem and where I can cross verify.
Thanks & regards
Mrutyunjay
Hi Mrutyunjay,
directory transports are not activated automatically. With the CTS+ import to the directory a changelist containg the objects is created under the service user used for the target system in the XI TMS configuration.
You have to takeover the changelist from the service user, adjust the "non-transportable" fields of the objects in the changelist, and finally activate the changelist,
Afterwards the objects should exist in the target directory.
Best regards,
Silvia
Similar Messages
-
Portal content not visible after installation nw2004s
Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
JohnHello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers] -
Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.
Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages
-
Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel
Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.
See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message. -
Hot spot s not visible after latest iOS version update on my iPad please help
hey personal hot spot is not visible after iOS latest version update on my iPad mini please help
Hey Devinder from chd,
For most issues with Personal Hotspot, try out the basic troubleshooting in the article below. It does talk about iPhone but the troubleshooting is the same for your iPad. If you are still having issues, let me know and I can see what else we can do after that.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
Take it easy,
-Norm G. -
Download button on appstore is not visible after I have upgrated IOS 7 in my Iphone 5
Download button on appstore is not visible after I have upgrated IOS 7 in Iphone 5, how can I fix it?
I am using iPhone 4S. Under iOS 7.04 everything was working fine. Now that I have updated to new 7.1 version, I am finding that the overall phone speed as been degregated.
Some times when answering the phone, you select to answer or swipe, it seems to hang up the phone. I end up missing the call.
Some times when I try to hang up the phone, it does not hang up right away. The phone appears to get stuck, you hear voices on the other end, but the call has not dropped. It takes a while for the call to drop and free up the phone.
Typing is slow. As you type, it does not show right away, only after 2 to 4 words have been typed then it will show all those characters.
Internet browsing is slow.
I mostly use the phone for 3 things - Making/Receiving calls, Texting, and Internet browsing. I don't play apps.
This is NOT a jailbrake phone, it's as original as it can get. I am hoping a fix is put into place. I have really lost faith in Apple's way of iOS upgrades. This is my 2nd regret in upgrading to new iOS. -
I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com -
Data in CSV uploads successfully, but it is not visible after upload.
Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len NUMBER:= 1;
v_line VARCHAR2 (32767):= NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows NUMBER;
v_count NUMBER;
v_dbid NUMBER;
v_serverid NUMBER;
v_sr_no NUMBER:=1;
v_last_char varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len NUMBER:= 1;
v_line VARCHAR2 (32767):= NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows NUMBER;
v_count NUMBER;
v_dbid NUMBER;
v_serverid NUMBER;
v_sr_no NUMBER:=1;
v_last_char varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
( "APPID" NUMBER,
"APPNAME" VARCHAR2(50),
"APP_PROVIDER" VARCHAR2(50),
"DBID" NUMBER,
"CRITICAL" VARCHAR2(3),
"REMARKS" VARCHAR2(255),
"LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
"LAST_UPDATE_BY" VARCHAR2(10),
"SERVERID" NUMBER,
"HOSTNAME" VARCHAR2(20),
"IPADDRESS" VARCHAR2(16),
"ENV_TYPE" VARCHAR2(20),
"ENV_NUM" VARCHAR2(20),
"ENV_NAME" VARCHAR2(50),
"APPLICATION" VARCHAR2(50),
"APPLICATION_COMPONENT" VARCHAR2(50),
"NOTES" VARCHAR2(255),
"CLSTR" VARCHAR2(20),
"LOAD_BALANCED" VARCHAR2(20),
"BUSINESS" VARCHAR2(255),
"ENV_OWNER" VARCHAR2(20),
"CONTROLLED" VARCHAR2(20),
"SSO_ENABLED" VARCHAR2(20),
"ADSI" VARCHAR2(20),
"DISASTER" VARCHAR2(50),
"INTERFACES" VARCHAR2(50),
CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
SharathHi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''. -
Roadmap steps are not visible after patching
Hi ,
After upgrading or patching ,roadmap steps are not visible in my application.
i have used several road maps in my application?
what is the reason for this?
Regards,
Lakshmi.I have faced the same issue.
These are browser compatibility issues.
Different browsers behave in different manner.
There is a permanent solution for it to upgrade tools version to 8.52.03.
This update has been provided by oracle for resolution of browser compatibility issues.
Hope it helps !! -
VST edit screen not visible after a certain number in a session
Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
Lenovo laptop, i5, using firepod.The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.
-
Second podcast not visible after serial hours
hi everybody, thank you so much in advance for you precious help, i'm started with itunes...
yesterday, i uploaded my first episode, it's ok... but now, i added a second one, but after serial hours, my second podcast is not visible... someone can say me what's append ?
my itunes page is http://itunes.apple.com/fr/podcast/yann-anderson/id481784540?ign-mpt=uo%3D4
my xml is: www.yannanderson.com/itunes.xml
THANK YOU X 1000000000000Please look at the FeedValidator report to see your feed: line 42, the 'guid' tag contents are the same as that on line 29. The 'guid' tag must be unique for each episode: iTunes uses it to detect if there is a new episode, so as they are the same it's ignoring the second appearance and the episode it appears in.
The 'guid' tag contents can be anything you like, as long as they are different for each episode. When you correct this your new episode will appear immediately for subscribers: however because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days. -
Whatsapp contacts not visible after undating to BB 10.3.1.156​5
Hi
Contacts are not visible in the whatsapp screen after updating my blackBerry Z3 to OS 10.3. Instead only the number are visible. Anybody having any solution or facing similar problem, please let me know.
Regards1)
what is your current whatsapp version? And where did you download it?
2)
since your message, I think that your mobile phone operator has pushed a new OS version. Have you installed it already?
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Contacts not visible after moving contacts from SI...
I have express music 5310. i had moved my contacts from sim to phone memory. After which these contacts are not visible. These are not available on the sim anymore. They are not visible on contact lists too..
Any help on retrieving these would be very helpfulIn contacts settings set the phone contacts to phone contacts only is it now set to both?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Hard drive not visible after restart
I have a question which has nothing to do with Arch but is rather na hardware question. I have a laptop with two hard drives, one of which is SSD. Suddenly the SSD drive is not visible (even in BIOS) after the OS restart. When I shutdown the laptop the drive is visible and I can boot into Arch but if I restart the laptop (either from Windows or Arch) it's not visible.
Any thoughts or suggestions? I have the latest version of BIOS...
Thanks in advance.It must be some bad combination of bugs in the SSD and motherboard firmwares.
What happens if you swap the drives between bays?
What happens when you reboot and then boot Linux from the second disk or some pendrive? Does the kernel detect this SSD? Look for this in dmesg:
[ 1.753159] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 22
[ 1.753162] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 22
[ 1.753164] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 22
[ 1.753166] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 22
[ 1.753168] ata5: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff00 irq 22
[ 1.753169] ata6: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9ffff80 irq 22
[ 2.058188] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.058221] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.058316] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.058346] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.213403] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.213427] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.213717] ata2.00: ATA-8: INTEL SSDSA2BW600G3D, 4PC10362, max UDMA/133
[ 2.213719] ata2.00: 1172123568 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.213725] ata6.00: ATA-8: INTEL SSDSA2BW600G3D, 4PC10362, max UDMA/133
[ 2.213726] ata6.00: 1172123568 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.214063] ata6.00: configured for UDMA/133
[ 2.214075] ata2.00: configured for UDMA/133
EDIT:
Are BIOS or SSD firmware updates available?
Last edited by mich41 (2014-11-13 20:43:50)
Maybe you are looking for
-
A problem with bind variables in a shuttle
Hi After days of research I cannot come up with a solution to this problem which I hope will be easy to describe. I'm working on an apex.oracle.com workspace (4.02). I have a page with a) a region with tree which works well populated by a list of rol
-
Control and playback of AS2 SWF playing in AS3 SWF?
Hi, I have a rather interesting techincal question: 1. For starters I have a main flash movie which was developed using AS3 code. It is a video player type flash movie set up to play SWF files including 4 selectable SWF segments. 2. However I have re
-
Read Write Problems, Javascript
Hello, I have had problems with a simple procedure. The grand scheme involves a lot more, so my example may seem trivial but this is where I've narrowed the problem down to. I cannot read an image file using the File object and write it back out as a
-
Cannot access solutions center
My install got corrupted and I tried to uninstall and download from site but got no access to the solutions center software to use the scan function from the desktop. This is the version that I downloaded - HPSupportSolutionsFramework-12.0.26. I do
-
had an install disc of earlier os x release, but ubuntu didn't want to recognize it. would only show an harddrive image labeled "windows" which led back to elementary os.