Transports of 0cubes to production box
Hi
We are planning to transport 0cubes to production box, how do i do it? what steps do i need to take to ensure objects are properly activated, unit tested in sandbox, transported to QA box and with just a click of a button load the test data.
Mind you we are on 2004s so give me details regarding DTP's and how to create them too. Get as detail as possible .
Provide Step by step screen shots where ever applicable If any. Use New GL or New PS_C041 for example
Thanks and Regards
lalit
HI
Best advice is to for a proper training rather than asking for screen shots for the complete life cycle of Development.
And try to use the word PLEASE. for example
PLEASE Provide Step by step screen shots where ever applicable If any. Use New GL or New PS_C041 for example
thanks
Similar Messages
-
Transport PARAMETER entries in TVARV to Production box
Hi Guys,
I have created 5 entried in table TVARV for Parameters:
Entries are as follows:
NAME TYPE NUMB LOW
Z11 P 0001 PARAMETER 1
Z11 P 0002 PARAMETER 2
Z11 P 0003 PARAMETER 3
Z11 P 0004 PARAMETER 4
Z11 P 0005 PARAMETER 5
I want transport these entries to Production box. I cannot use SM30 as I cannot create multliple records for same NAME with value Z11.
Please tell me the tcode and steps to attach these entries to a transport.
Do I need a Customizing transport?
Thanks
miniHi,
Entries in table TVARV needs to be created directly in production. You do not have to transport these entries from your development client to further clients. TVARV is a table to hold global variable.
Login to your production system, go to SM30 and enter table name TVARV and click maintain. Inside the maintenance screen you can see change button, you can add your entries directly there. Don't worry change button will be enables even in production for this table.
Regards,
Venkat -
Duplicate Queries and Query Components in BI Production Box
Hi:
We have a situation where we have duplicate queries and query components in our Production BI box.
The problem was caused by transports. We have a development landscape and a support landscape where both are transporting separately up to the BI Production Box.
For example, query ABC was created in the development landscape and transported up to our production box.
The same query ABC was created in our support landscape and transported up to our production box.
Now in the production box we have 2 queries ABC with the same technical name and description but with different active ELTUIDs.
We have found the program ANALYZE_RSZ_TABLES and it does show us this problem in our production box with many queries and query components.
The question is how do we get rid of the duplicate ELTUIDs in our Production box and how do we stop this from happening during transport?
any suggestions would be helpful.Hi JC,
I think you can use Tcode RSZDELETE to delete the duplicate UIDs of elements or any query objects.
Test it in dev box / sandbox before using it in prod.
Thanks -
Transporting form BOX to another BOX to production BOX changes not effect
Hi Expert's,
Good Day!
I would like some help from on my object from "Transporting form BOX1 to another BOX1 to production BOX changes not effect" ??
The issue is regarding transaction SE51 (screen painter). I was changing the Define Length from 45 to 55 upon activating their will be a pop-up information message will appear "Selection screen: Report generation makes screen changes ineffective". After the activation the Define Length in transaction se51 will now be 55.
However, upon transporting to another Box/system the Define Length will be 45 instead of 55. Can you help me how to solve this problem? What to do to avoid the changes in the Define Length so that it would still be 55 instead of 45?
Answer's will be a great help.
Thank you,
~Junne RayHi Satya,
Good Day!
I was changing the Screen (transaction SE51) of a field Define Length from 45 to 55. the changes is transported and reflected to another box but when transporting it again to the production box the Screen (transaction SE51) the Define length changes again to 45 instead to 55.
~Thank you so much
Junne Ray
Edited by: jrvillacortz on Mar 25, 2009 6:23 AM -
ZTABLE TRANSPORT WITH CONTENTS TO PRODUCTION SERVER
Hi Friends,
I had created a ztable in Developement server with 3 fields including MANDT field and added 15 records to that table. (MANDT = 500).
When I transport to QA Server, the data entered in the development server, are not visible. Again I entered the data in the QA server with MANDT = 150.
Later, I transported the table to Production server. Again here also no data found. When I tried to add entries, the system throws the following message :
"The System Settings Do Not Allow Any Changes".
Please let me know what step I have missed out.
Also let me know the following :
1. How to transport a ztable from Devlopment server to QA/Production server with all the data.
2. How to add new entries in Productin server.
Thanx in advance,
A S VINCENTHi again,
1. Function group
(create an empty function group in
new session thru se80 tcode,
and mention it here)
2. Authorization group
Just check out using F4
if some Z* or Y* is avaialble or not
(If not , ask basis team to
create on Z/Y authorisaton group,
and mention it here)
3. Choose radio button ONE STEP
4. In overview screen text box
, just enter 1000
5. Just enter the above fields,
and press CREATE.
regards,
amit m. -
How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid. When I tried to type this in for registration, it does register as this numbers also contain letters in it. Apparently the registration boxes accept numbers only. What do I do with a useless product for which I have paid good money for it?????
This is the simple solution which was offered to me when I tried to get the serial code on line.
The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
I is really frustrating, spending the last two hours trying to get my product going.... -
HELP. where do I get a serial number if I no longer have the product box (oops) and I still need to install the software. Is a human even working at Adobe? Do they ever look at email? I can't be the only person with this problem.
Here is a link to a page with options to help make contact (see chat and phone options down the page):
http://helpx.adobe.com/contact.html?step=CCSN_downloading-installing-setting-up_licensing- activation_stillNeedHelp
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
Warning MSG : while Transporting a Request to Production
<b>Hi Friends,
I got folowing errors while transporting a Request to Production -</b>
<b>PART 1 .</b>
+++++++++++++++++++++++++++++++++++++++++++++++++
NBA Quality Assurance
Selection for Import 03.05.2006 11:56:02 (0) Successfully Completed
Import ABAP Dictionary Objects 04.05.2006 08:56:08 (0) Successfully Completed
ABAP Dictionary Activation 04.05.2006 08:56:14 (4) <b>Ended with Warning</b>
Import 04.05.2006 08:56:34 (0) Successfully Completed
Check Versions 04.05.2006 08:56:47 (0) Successfully Completed
Import steps not specific to transport request
NBP Nobel Production System
Selection for Import 04.05.2006 08:56:35 (0) Successfully Completed
Import ABAP Dictionary Objects 27.06.2006 13:55:12 (0) Successfully Completed
ABAP Dictionary Activation 27.06.2006 13:55:15 (4) <b>Ended with Warning</b>
Import 27.06.2006 13:55:36 (0) Successfully Completed
Check Versions 27.06.2006 13:55:51 (0) Successfully Completed
Import steps not specific to transport request
++++++++++++++++++++++++++++++++++++++++++++++++++++++
<b>PART 2</b> - <b>LOG</b>
ABAP Dictionary: Activation
Transport request___: NBDK923224
System______________: NBA
tp path : tp
Version and Release: 340.16.09 640
Program start============================================================
Mass activation
=========================================================================
Process..................: nb13_21
User.....................: DDIC
Date, time...............: 04.05.2006, 08:56:13
Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
Tool.....................: BATCH/RADMASG0
Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
Program parameters:
Input medium...............: Transp. request NBDK923224
Activation method..........: Inactv.
Chk. mode..................: T
Version to be activated....: M
Versions to Be Deleted.....: Delete only active versions
Lock against paral. exec...: Shared
Independent statistics log.: being written
Parallel mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
No object to be deleted and activated exists
=========================================================================
Mass activation
=========================================================================
Process..................: nb13_21
Return code..............: 4
Program runtime..........: < 1 sec.
Date, time...............: 04.05.2006, 08:56:13
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20060504085614
Ended with return code: ===> 4 <===
=========================================================================
Mass activation
=========================================================================
Process..................: nb13_21
Return code..............: 4
Program runtime..........: < 1 sec.
Date, time...............: 04.05.2006, 08:56:13
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20060504085614
Ended with return code: ===> 4 <===
<b>Can any one tell me why this ? what is the impact of it ??</b>hi,
you must extend the log complete, than you'll see the
object, which caused the error.
RC = is only warning:
All the objects were transported successfully.
Peculiarities occurred for certain objects. These might
not have been intentional.
Example: A warning is given during a transport if the request contains an object deletion. ...
A.
Message was edited by: Andreas Mann -
I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?
If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.
-
My camera is in a productivity box, how do I get it out
the camera is now in a productivity box on my iPhone. How do I undo this?
Drag it out.
iPhone User Guide (For iOS 5.0 Software) -
My phone and ITunes is now in a Productivity box, how can I get it out?
My iPhone has developed a Productivity Box and has my phone and iTune's in it, how can I get it out of that box?
I don't have a clue what you mean.
-
TRANSPORT Z-TABLE TO PRODUCTION SERVER.
HI,
I'VE CREATED ONE Z-TABLE,EVEN THOUGH THE Z-TABLE CONTAIN NO DATA ,WHEN I'M TRANSPORTING THIS Z-TABLE FROM DEVELOPMENT SERVER TO PRODUCTION SERVER IT IS GIVING THE ERROR
KAY MESSAGE TABLE ZPF_DETAIL 2002007011004
ENTER NUMERIC VALUES ONLY
HERE 200-DATA OF MANDT FIELD
2007-YEAR
01-MONTH
1004-PERNR
WHICH I'VE ENTERED PREVIOUSLY,BUT NOW THIS TABLE CONTAIN NO DATA.
PLEASE SUGGEST ME WHAT TO DO TO TRANSPORT THE TABLE TO PRODUCTION SERVER.
PLEASE HELP ME,IT'S URGENT.
THANKS
SUJATA
Edited by: Sujata Swain on May 8, 2008 6:53 AMHi,
After creating the table first activate the table
Check whether Delivery and maintenace
and Technical attribute tabs are maintained.
Once that is done transport that request to production.
To maintain the table in production you will have to create a maintenance view for the same -
How to import transport of copies to productive systems
Hello,
I have been experiencing a problem that even the guys from admin could not solve (yet). I should say I work in a development team.
Imagine you have two landscapes, one DEV-QAS(1) to develop big projects and a normal DEV-QAS-PRD(2) landscape where my objects will be imported. After a new group of objects is finished in (1), we ask to import the workbench request in the STMS queue of DEV(2). After this, and after some small test, we create a transport of copies in DEV(2) where we include the first transport, release it and import it to the QAS(2) queue. After the tests in QAS(2) the idea would be to import the transport of copies to productive system PRD(2). But it does not work...
In STMS queue for PRD(2), there is no entry for the transport of copies. Also, when I tried to add the transport request to the import queue (via menu -> Extras -> Other requests -> Add), I get an error message stating that no co-files where found for the transport.
Does anyone know this problem? I suspect it can have sothing to do with the use of a transport of copies, but, if I don't use this kind of transport, how can I get objects from other systems to production?
Thanks in advance.
Davide Sepanas, PortugalDavide,
Re your latest questions:
> 1) Why this problem with transport of copies doesn't happen from DEV(2) to QAS(2), since these systems are also not in the same transport directory?
>
I think the answer is in your original problem description:
we create a transport of copies in DEV(2) where we include the first transport
>
When you create a transport of copies you must indicate a terget system and I suppose you enter QAS(2) there. In that case the TMS will add the request to the import buffer of the target system when you export the request from DEV(2). I understand that you never have to add transports of copies to the import buffer of QAS(2) manually, which proves the TMS does this for you. However, for further imports into systems that are not designated as target system of the transport of copies, like PRD(2), the TMS will do nothing of the sort and you must add the request to the queue yourself - which in your case also means you have to forward the transport files first.
> Can we assume, then, that, where I was working before, all three systems were configured in the same transport directory, avoiding thus the problem with the transport of copies requests?
Yes, and that is the most common way of setting up the transport system. Having separate transport systems really only makes sense when sharing the transport directory between the dev, qas and prd systems (via NFS for UNIX, via network shares for Windows) is not possible, either because there is no local network between the servers or because some security policy forbids it. I'd advise you to certainly ask the question to your system admin.
Regards,
Mark -
I can't find the serial number of the elements 13 product box
Where is the serial number on the elements 13 product box?
1-Elements is not part of the Cloud... moved
2-Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
Data transport from development too production system
Hi, friends
I created a house bank in development sever now i want to transport it in to production server so how can i transport it , please anyone give the solution urgently with screen shot
my id is goutam.jena at genus.in
thnxs
goutam kumarIn the screen FI12 if you have filled all the relevant data, the system should propose teh request on its own. If you have missed and clubbed this in any other transport request, then you need to generate transport.
Fropm the Table view Menu select Transport. This will give you first transport request creation option and then you select the entries that you want to transport and then press button " Include in Transport".
Save entries and trans port.
Maybe you are looking for
-
I have purchased an item from within the app PocketBible on my iPad. However when I try to download it I am asked for my app User Name and Password and then my Apple ID and password. I give both of these. I then get a message which says Regrant fa
-
2010 Macbook constantly crashes after update to Mountain Lion
Here is the problem report: Interval Since Last Panic Report: 113393 sec Panics Since Last Report: 8 Anonymous UUID: 6C81E16E-40AA-50A7-1144-D99B8CBFB282 Thu Dec 27 17:58:56 2012 panic(cpu 3 caller 0xffffff7f831b6b25): NV
-
Where is the TouchUp Reading Order Tool in Adobe Acrobat X
Hi, Our company just switched to Adobe Acrobat X and I'm having issues with some of the tools. In the old adobe acrobat I was able to use the TouchUp Reading Order Tool; does that tool still exist in X? I've tried the Edit Object tool but it's not wo
-
Interactive Report validation error messages...
Hi guys! I was looking for answer to this question for a long time now...is it possible to change the validation error messages in interactive report? With regards, PsmakR
-
Hi Emergency request*********** Recently I had a requirement for change of depreciation key in the asset classes in depreciation areas 01- book depreciation to calculate straight line depreciation as the old depreciation key was not doing as requeste