Transpose Of The Internal Table

I have The Data In ITAB (Internal Table ) I want To Transpose the Row To Column. Pls Any one Help me
Thanks ,
Vijayakanth.K
Moderator Message: Very generic question. Similar questions have been discussed in the forums. Try to implement the solutions & get back in case you face any specific issues!
Edited by: Suhas Saha on Aug 11, 2011 5:33 PM

Hi Sheetal,
You can do this using field symbols. See the below
sample code for this.
First I am reading entries from one table and using
those reocrds have created dynamic table.
DATA: d_ref TYPE REF TO data ,
      d_ref2 TYPE REF TO data ,
      d_ref3 type ref to data,
      i_alv_cat TYPE TABLE OF lvc_s_fcat ,
      ls_alv_cat LIKE LINE OF i_alv_cat .
data : i_rfc like YHPTRFCD occurs 0 with header line.
DATA: fieldcat type lvc_t_fcat with header line,
      infty_tab_pointer type ref to data.
*TYPES tabname LIKE dcobjdef-name .
*parameter: p_tablen type tabname.
FIELD-SYMBOLS : <F_FS> TYPE table,
<F_FS1> TYPE TABLE,
<F_FS2> TYPE ANY,
<F_FS3> TYPE TABLE,
<f_fS4> type any.
data : v_lines like sy-tabix.
select * from YHPTRFCD
into table i_rfc.
LOOP AT i_rfc .
    ls_alv_cat-fieldname = i_rfc-YHPSYST.
    ls_alv_cat-inttype    = 'CHAR'.
    ls_alv_cat-coltext    = i_rfc-YHPSYST.
*   ls_fieldcat-decimals_o   = '2'.
    ls_alv_cat-outputlen = 15.
    ls_alv_cat-ICON      = 'X'.
    ls_alv_cat-TOOLTIP = 'Ikone_langgggggggggg'.
    ls_alv_cat-SELTEXT = 'Ikone_mittellll'.
    APPEND ls_alv_cat TO i_alv_cat.
* ls_alv_cat-fieldname = i_rfc-YHPSYST.
* ls_alv_cat-ref_table = 'yhptrfcd'.
* ls_alv_cat-ref_field = 'YHPSYST'.
* APPEND ls_alv_cat TO i_alv_cat.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = i_alv_cat
IMPORTING ep_table = d_ref .
ASSIGN d_ref->* TO <F_FS>.
* Form to fill table
perform fill_table.
Hope this will solve your problem.
Thanks & Regards,
Siri.
Message was edited by: Srilatha T

Similar Messages

Totals for the internal table field in alv

Hi Gurus,
I have an issue in displaying the totals in alv.
I have an internal table with the three fields like below.
scrap_code_001 like afru-xmnga, " Scrap Reason Qty.
scrap_code_002 like afru-xmnga, " Scrap Reason Qty.
scrap_code_003 like afru-xmnga, " Scrap Reason Qty.
In the output table which i am passing to the fieldcatlog is having the three above fields with values 10,3,4 respectively.
I am looping at the internal table
loop at gt_grund.
gv_tabix = sy-tabix.
i_fieldcat-no_zero = gc_x.
i_fieldcat-do_sum = gc_x.
perform assign_alv_qty_format.
if gt_grund-grund is initial.
gt_grund = 'NONE'.
gv_text = gt_grund.
else.
gv_text = gt_grund-grdtx.
endif.
gv_tabixn = gv_tabix.
gv_scrap_code+11(03) = gv_tabixn.
gv_fieldname = gv_scrap_code.
translate gv_fieldname to upper case.
perform bild_fieldcat using
gv_fieldname 'GT_REPORT' 'AFRU' gv_text 'QUAN' '12' ' ' .
endif.
endloop.
But in the output I am getting the totals but it displays totals for all the three columns as 17,17,17 (summing 10,3,4).
How do I display total as 10,3,4 for each column separately.
I appreciate you help and award points for the answer

Hi,
Please check if value fields i_fieldcat-ref_fieldname and i_fieldcat-ref_tabname regard to numc or curr type.
EX: i_fieldcat-ref_fieldname = 'WRBTR'
I_fieldcat-ref_tabname = 'BSEG'.
Regards,
Fernando

How to Down load Data in Application server into the Internal Table

hi freinds,
iam having a file in the application server.
now i need to send the data in the file to the internal table.
is there any Function Module?
i need with out using the OPEN DATA SET and CLOSE DATA SET Keywords.
is there any possible?
Regard's,
Ranjith.

Hi,
There is no other option for uploading the data from the application server to the internal table without using OPEN DATASET and CLOSE DATASET. Even if you find the FM internal logic in FM uses these keywords to read the data from Application server.

How to get the Data type of the Internal Table.

How can i get the data types used to create an internal table
TYPES : BEGIN OF t_makt,
          matnr    TYPE    matnr,
          maktx    TYPE    maktx,
        END OF t_makt.
Like this some function will give me which data types i have used for the internal table at run time.

Use the FM ..
data : int_fcat type SLIS_T_FIELDCAT_ALV.
REUSE_ALV_FIELDCATALOG_MERGE ..
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT'   <-- this is your internal table
             I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat <--- this contains all the fields along with their characteristics ...
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.

Data overflow in the internal table

Hi Friends,
I am hitting table CDHDR and getting a huge data based on date range and the problem is the internal table is not able to hold the entire data selected and hence it is going for run time error. Could you please suggest an idea to overcome this?
Thanks in advance,
Ram

Hi,
here is the code i have written...
Get all changes to materials in the given date range
SELECT objectclas                    " Object Class
         objectid                      " Object Value
         changenr                      " Change Document Number
         udate                         " Changed Date
         utime                         " Changed Time
    FROM cdhdr
    INTO TABLE gt_cdhdr
   WHERE objectclas EQ c_clas_material
     AND udate      IN s_date.
Regards,
Ram

Creating MS- Access data base from the Internal tables data of an ABAP Prog

Hi,
I have a requirement where I have to create Access tables from the Internal tables of ABAP program.
The tables are like Project systems Header data, WBS elements data, Netwrok data, Activity data, Milestone data and Project revunes. I will have the internal tables for these. I want to transfer these tables data into MS-Access tables onto Users desktop.
Please adivce me how to do this.
Thanks,
Prabhakar

HI,
I am trying to create a DB table in the access but I am not successful. The following is the format of the table needs to be created from the ABAP program.
I have created a table with the following format in MS-Access with the name tblHeader. Is it neccessary to create a DB table ( MS-Access) in advance or by using the FM STRUCTURE_EXPORT_ TO_MSACCESS we need to create a structure in MS-Access?
False tblHeader
Field Name Type Length
ProjectDef Text 255
ProjectDes Text 255
Created Text 50
Change Text 50
RespPerson Text 255
Profile Text 255
Plant Text 255
ObjNo Text 255
OverheadKey Text 255
I have created a Z table ZTAB1 with the same format from the SAP fields.
MS-Access Table name : tblHeader
ABAP program Internal table : t_tblheader
Z table Name : ZTAB1.
First I am trying to create a structure in MS-Access with the following FM.
CALL FUNCTION 'STRUCTURE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
LANGU = SY-LANGU
dest = 'PS_ACCESS_1'
TABLES
tabname = ttblheader
EXCEPTIONS
system_failure = 1
comm_failure = 2
OTHERS = 3
Table ttblheader type is DFIES and I am filling the table with only one record and one field i.e TABNAME and the value is ZTAB1.
The source code of the FM is using another FM
CALL FUNCTION 'MSACCESS_STRUCT_ EXPORT_RFC' DESTINATION DEST
Here I am getting the Error message Object required. I can't able to create a table structure in MS-Access.
Next I am going to Use the FM
'TABLE_EXPORT_ TO_MSACCESS'
and it will create the records in the MS-access table.
CALL FUNCTION 'TABLE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
langu = sy-langu
dest = 'PS_ACCESS_2'
tabname = 'ZTAB1'
reftable = 'tblheader'
FLG_NO_DOWNLOAD = ' '
FLG_APPEND = ' '
FLG_POPUP = ' '
TABLES
dtab = t_tblheader
here t_tblheader is the internal table.
Reftable = tblheader is the table which i have created in advance. ( not by using the First FM)
In this FM i am getting a error message : Unable to connect to Database D:\test\db2.
Please help me how to create the MS-Access database.

Upload an XML file into the Internal table

Hi Guys,
I want to know, how to upload an xml file into the Internal table through ABAP programming

you just wanted to load the xml file into internal table (as a table of binary strings)or load the xml data mapped to itab row columns
for the first one you can simply use gui_upload
and for the second one you need to load the xml file using gui_upload and use XLST program to transform into an itab
Regards
Raja

How to Pass the Internal table of a report to Smart Form

Hi Experts,
I have one report in which from selection screen i am getting the values from the users, and upon that values i am filling data in to the internal table.
Now i want to pass that internal table data to the smart form
and print that data in the smart form.
So could you pls give me some pseudo code or any steps to achieve it.
Thanks & Regards,
DS

Hi DS,
First of all you need to create a SF and then need to call the FM generated by the FM in your report.
In the SF in the form interface>tables tab>mention the name of the table and its type structure.
Pls note that a new structure has to be created as the same type of your internal table which holds the data.
And the import and export parameters as just the same as in a FM.
Now after you create and activate your SF a FM will be generated (wen u execute your SF you will be taken to this SE37 screen with the name of FM so no probs..)
You can call this FM in your report. Hope this helps.
Ex:
say itab has your final data, and you also want to export a variable var1 to the SF.
after your normal report operations end, call the FM and pass on these data.
say your FM name is FM1.
call function FM1
exporting
var1 = var1
tables
itab1 = itab1.
pls note that in the SF also i gave the same names, it is not mandatory to give the same names.
and as you want to print a table in the smartforms, you need to create a table in the smart forms and then display the data which is quite simple.
Hope this helps...
if you need any further explanations, pls revert...
Regards,
Narendra.
Reward points if helpful!!!

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

How to pass the internal table defined in program to ALV

Hi Friends,
I have a doubt regaring the ALV's,
How can we pass the internal table defined in the program to ALV by not filling the attribute (I_STRUCTURE_NAME) in the REUSE_ALV_LIST_DISPLAY.
I have tried many ways but unable to pass the structure of the internal table. I am getting the error message "Field Catalog Not Specified......" and its terminating and when i am giving the I_STRUCTURE_NAME = 'INTERNAL-TABLE-NAME' then its displaying a blank screen with all the tool-bars and icons...(No output of internal table data is seen on the screen) .
and when i am passing the DDIC table or structure ( for eg. LFA1) to I_STRUCTURE_NAME then its displaying with any error.
Plaese help in resolving this problem....
Regards
Pradeep Goli

Hi,
Check this thread which gives example of ALV. This will give you an idea.
Interactive ALV
ashish

How to pass the internal table data to smartforms

Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = T_SSFCTRLOP
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
    OUTPUT_OPTIONS             = T_SSFCOMPOP
    USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    LT_PRDLBL                 = LT_PRDLBL1
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
        include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PM

Nehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
&LT_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks,

How to Pass the internal table data?

DearAll,
How to pass the Data of one internal table on a 1.html page to another html page for output, in BSP Application.
regards.

Hi ,
In the onInputProcessing event of the first page , write the following code...
call method NAVIGATION->SET_PARAMETER exporting
    name = 'it_filt_cur'
    value = it_filt_cur.
Here it_filt_cur is internal table.
          NAVIGATION->GOTO_PAGE('next.htm').
In the next page , you can make the internal table as auto in the attributes.
Since you have made the itab as auto transfer , you can directly access the itab in the initialization event of the next page if it is stateless.
Regards,
Laxman Nayak.
Message was edited by: Laxman Nayak

FM to upload the Internal table data into application server.

Hi,
Could you please give me Function module to Upload the Internal table data into Application server ie., in Tcode AL11.
I know for downloading the Application server file into itab is "SUBST_GET_FILE_LIST" FM and using open dtaa set we get the data.
Regards,
deepthi.

Hi Deepthi
Incase you are looking to upload data in the AL11 through a program , then you can make use of OPEN DATASET...CLOSE DATASET statements.
Here's the code snippet:
IF tb_alvdisplay[] IS INITIAL.
    MESSAGE e999(/dcsea/zais_msg) WITH text-e01.
ELSE.
    IF NOT cb_ufile IS INITIAL "Download to file
     AND sy-pagno = 0.            "Only down page headers for first page
      PERFORM fm_concatenate_path_name USING    p_path
                                                p_file
                                       CHANGING v_file.
*Open file for download.
      PERFORM fm_open_file USING v_file .
    ENDIF.
    LOOP AT tb_alvdisplay.
      IF NOT cb_ufile IS INITIAL.
*Passing the values of the respective headings to the structure.
        ws_rec-vend_no     = tb_alvdisplay-vendno.
        ws_rec-vend_nm     = tb_alvdisplay-vendnm.
        ws_rec-title       = tb_alvdisplay-vendtl.
        ws_rec-add         = tb_alvdisplay-add.
        ws_rec-city1       = tb_alvdisplay-city1.
        ws_rec-region      = tb_alvdisplay-region.
        ws_rec-country     = tb_alvdisplay-country.
        ws_rec-pobox       = tb_alvdisplay-po.
        ws_rec-phone       = tb_alvdisplay-telf1.
        ws_rec-extn        = tb_alvdisplay-extn.
        ws_rec-fax         = tb_alvdisplay-telfx.
        ws_rec-zterm       = tb_alvdisplay-zterm.
        ws_rec-remark      = tb_alvdisplay-remark.
        ws_rec-email       = tb_alvdisplay-email.
*Passing the separator 'PIPE' to the structure.
          ws_rec-sep01 = co_sep.
          ws_rec-sep02 = co_sep.
          ws_rec-sep03 = co_sep.
          ws_rec-sep04 = co_sep.
          ws_rec-sep05 = co_sep.
          ws_rec-sep06 = co_sep.
          ws_rec-sep07 = co_sep.
          ws_rec-sep08 = co_sep.
          ws_rec-sep09 = co_sep.
          ws_rec-sep10 = co_sep.
          ws_rec-sep11 = co_sep.
          ws_rec-sep12 = co_sep.
          ws_rec-sep13 = co_sep.
        TRANSFER ws_rec TO v_file.
      ENDIF.
      AT LAST.
        IF NOT cb_ufile IS INITIAL.
*Closing the DATASET file.
          CLOSE DATASET v_file.
          IF sy-subrc <> 0.
*Failure Message.
            MESSAGE e999(/dcsea/zais_msg) WITH text-t04 text-t06.
          ELSE.
*Success message.
            MESSAGE s999(/dcsea/zais_msg) WITH text-t05.
          ENDIF.
        ENDIF.
      ENDAT.
    ENDLOOP.
ENDIF.
Also as Gautham suggested you can use tcode CG3Z or CG3Y incase you are looking to upload the data directly.
FInally, you can search SCN using the keywords, "Upload to AL11" and you'll get loads of results.
Hope this helps.
Harsh

Downloading the internal table with header to FTP folder

Hi All,
I have one requirement in downloading the internal table details with the fixed header line to FTP folder. The header line having the fixed text of 425 characters length.
Note: We are not suppose to use WS_DOWNLOAD and GUI_DOWNLOAD function modules.
Thanks in advance for your reply.
Regards
Kamini.

Hi,
I can download the internal table details successfully to FTP folder using the FTP function modules like(FTP_CONNECT, FTP_COMMAND , FTP_R/3_TO_SERVER and FTP_DISCONNECT). Here my problem is I am unable to download the internation table with some header text.
You can see the format (example) of file to be download.
Here I can successfully download the below details without the header. But I am unable to download with header line. Could you please suggest me.
seq_no|record_action|trans_date|sku|description|
1|N|2008-01-03 07:52:31|TTASA5025CBO
2|N|2008-01-03 10:28:33|411014
3|N|2008-01-03 10:01:03|TTASA6030CBO
4|N|2008-01-03 10:01:15|TTASA6630CBO
5|N|2008-01-03 10:01:25|TTASA7035CBO
6|N|2008-01-08 16:57:39|TT6G
Regards
Kamini.

Problem with downloading the internal table onto the presentation server.

Hey folks,
I have a problem where in i am downloading one year of sales done by the company. I wrote a program to download the file onto the presentation server . The error occurs in the FM GUI_DOWNLOAD where if the file exceeds 105843504 bytes its giving me a dump saying that
When the program was running , it was established that more memory was needed than the operating system is able to safely to provide.
The current program has to be terminted because of the program already requested 105843504 bytes from the operating system with malloc when the operating system reported after further memory request that there was no more memory space available.
Could somebody provide an alternative soltuion for this.
Its really urgent as i can download the file with 70,000,000 bytes
Regards
Rock

Hi Rock,
Please download the files on to Application Server, else as suggested by Ashish download into 2 or 3 files and merge them manually.
Declare same internal tables may be 5 times.
When you fill the internal table check for a counter and when you hit a certain number stop appending to it and start appending to the next.
After you are done so download all the internal tables.
I guess this would be a good way. I am not sure if there are any ther alternative good methods.
Hope this helps.
Shreekant

Transpose Of The Internal Table

Similar Messages

Maybe you are looking for