Transposing Blue Adio Loops in the Inspector only gives  + or - 12, 24, 36

How do I take a C and move it to F and G to have some fun with some loops that I want to work with? I can open the inspector I see the transpose section for the track but it only presents me with 12,24,36 how do I do something so simple?

Hi,
simply doubleclick onto the number to get access to the field where you can enter the transpose value directly in as small a number as you want.
Fox

Similar Messages

  • HT204400 We were watching a movie from iTunes on our Apple TV and it froze with about 10 minutes left... just a spinning disk.  Network was fine, I could run Netflix, I could choose other content... but the movie only gives spinning disk when I go to it.

    We were watching a movie from iTunes on our Apple TV and it froze with about 10 minutes left... just a spinning disk.  Network was fine, I could run Netflix, I could choose other content via AppleTV or iTunes... but the movie only gives spinning disk when I go back to it.  I confirmed settings on AppleTV and reset the unit without any result.  iTunes indicates I have 21 hours left on the rental.  I would like to be able to finish the movie and not have to rent it again.
    Any thoughts?  Anything that needs to be done in Samsung TV settings?

    How did you verify network was fine?
    Netflix adapts to the network whereas iTunes needs a consistently solid connection. What other content did you try?
    What is your current connection via speedtest
    Go to istumbler (Mac) or netstumbler (PC) to get a report of the network
    Make sure DNS is set to automatic.

  • How to uninstall bootcamp partition if the assistant only gives me the option to install bootcamp?

    I am trying to uninstall my Bootcamp partition but when I open bootcamp assistant it only gives me the option to install a bootcamp partition.
    Thanks

    Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

  • Hi , i tried to update my i pad few days ago with the ios 6 and after that the ipad is not switching on anymore the screen only gives me a picture of connecting the wire with the labtop i did that hundred times with no response don't know what to do now m

    hi,
    fewq days ago i updated my i pad to ios 6 by connecting it to the labtop , since that time my i pad is dead it doesn't want to switch on anymore the only message i get on the screen is a picture of wire connection with i tunes tried to connecting it hundred times with the labtop but without any response don't know what to do

    If force restarting doesnt work, and your computer cant recognize it, I would suggest bringing it to the genius bar at an apple store so they can run diagnostics. This seems to be the last step, because the issue seems pretty serious.
    Hope this helps!

  • How do I print a .pdf, when the program only gives me an option to save?

    I have read all the previous answers to this question. They all suggest to uncheck the print to
    file checkbox in the print dialog box. However, it appears I do not have a 'print to file' checkbox
    in my print dialog box. Any new ideas?

    you should install a PDF printer program and when you install a PDF printer program, it sets up as a printer in your computer's printer folder. (You won't see any application to run).
    All you need to do is print your document as you normally would, and choose the PDF program as the printer you want to use. The file it creates can be named whatever the original document name was named, but it will have .pdf extension instead. Very easy, very helpful.

  • Menu Clock Time Jumps Ahead 5 Hours - Then, on Restart, Blue Screen Loop

    This has happened twice now. I notice the time displayed by the menu clock is five hours ahead (I'm in New York time zone), then, on restart, I get the Blue Screen loop with the gear spinning, quick screen flash, then blue screen/spinning gears ad infinitum...
    Last time I did all the obvious: Resetting PRAM et al, repairing permissions, etc... I finally reinstalled SL and all was good.
    Any ideas what's going on? This is kind of freaking me out!
    Running latest Snow Leopard on Intel Core Duo 2.8 GHz iMac.

    Nope; although to be clear, they replaced the entire machine after a new logic board, power supply and hard drive failed to solve the problem; and the same problem persists. I'm inclined to believe that it's a software conflict of some sort, or -- since I haven't seen the same problem documented at length anywhere else -- I am very unlucky.
    One thing I haven't done is reinstall the entire OS from scratch. I've restored it from my Time Machine backup every time. I'm purchasing a new hard drive tonight for that purpose.

  • Trying to load ff on new supported tablet, but it only gives me the option of going to ff already loaded on my phone

    Whenever I try to load ff on my asus transformer tablet, the download only gives me the option to load it to my phone--that already has ff downloaded. There's a box in the download that lists the devices to send the download to, and the only option it will let me choose is my phone, and it won't let me add the tablet. This tablet is a ff supported device.

    Have you tried searching the Android market on the device for Firefox?

  • My phone keeps on looping with the apple logo after the blue screen.

    I tried to up date my iPhone 5s thru iTunes and got error statin iTunes has detected an iPhone in recovery mode. you must restore  this iPhone before it can be used with iTunes. Saw a video on you tube to use rec boot. So I downloaded rec boot v1.3 to try and kick it out of recovery mode and my phone keeps on looping with the white screen and black apple logo after the blue screen. I tried kicking it out with tiny umbrella and nothing happens. I was able to put the phone back in recovery mode and try using tiny umbrella while still connect to iTunes and hit exit recovery mode. under log tab it says sending exit recovery request to model # of the phone and nothing happen. My last option is to restore to factory settings which I don't want to do cause I would loose every thing. Can some one tell me I'm doing wrong or how to fix it. I would be greatly appreciate it the help. Thanks in advance. 

    Its looping because the iOS is not bootable which is why the iPhone booted to the ROM recovery mode.  Try using iTunes 12's 'Update' option when the iPhone is in recovery mode.

  • I get the blue screen loop when I try to start my Mac Pro dual-core intel computer. How can I get it to open?

    I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?

    Which OS X is installed?
    Troubleshooting advice can depend on that information.

  • Why does my iPhoto red eye reduction tool only give me blue or black blobs in the eyeballs that look completely unacceptable?

    Why does my iPhoto red eye reduction tool only give me blue or black blobs in the eyeballs that look completely unacceptable? Automatic mode makes blue blobs that cover iris and even eyelid! Manual mode gives black dots, not at all hte shape of a oerson's iris as seen in a picture.

    And again the answer is simply
    THere is no fix - that is the way it works - you can post as many times as you want but it will not change the fact that that is the way that iPhoto works
    No fix
    No work around
    It is what it is - nothing more - nothing less
    LN

  • Does the 4s only have a blue texting background?

    Does the 4s only have a blue texting bubble?

    It's actually a part of iOS 5, not the 4s specifically.
    The bubble color (and the Send button) change, depending on how your message goes.  Messages are blue if sent/recieved via iMessage, or green if by regular SMS/text.

  • In Logic Pro, trying to import a drum track from the bin to arrange area, the 'follow loop' box does not appear in the inspector

    imported a drum track from bin to arrange area.  It will not follow tempo of the project even though it was recorded in this project.  The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
    how do I set up the track so the 'follow tempo' box appears in the inspector?

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Logic will not let me edit Apple Loops in the Audio Window.  Any ideas?

    When I select a blue apple loop and put it in an audio track it works perfectly but when I go to the audio window it will not let me edit the Apple Loop. A window pops up and says "The requested action can not be performed because the edited file is an Apple Loop." In the manual it says that both green and blue Apple loops can be edited but every time I try to edit an Apple Loop that window pops up. It only does this for apple loops. What can I do.

    Hi there, this is because you cannot edit apple loops, other than cutting blue loops witht he scissors. If you want to edit/alter loops bounce them down to audio files, then you can do pretty much anything..
    cheers tommy
    DUAL 2.5GHZ G5 20" CINEMA DISPLAY 2.5GB RAM   Mac OS X (10.4.3)   LOGIC 7.1.1 MOTU 828 MK2 ISIGHT BT KEYBOARD AND MOUSE

  • Locking the formatting only

    Hello, I have searched through the forums but didn't find an answer that directly related ...
    I am putting together an employee schedule with multiple shifts per day, per person.
    To help staff differentiate between different shifts, I have made each shift cell different colours (morning shift pink, midday blue, evening yellow).
    To help make scheduling easier as I will be doing this each week, I would like to be able to copy and paste from cell to cell. My problem is that it not only copies the value but the formatting (colour) as well. I do not want to have to either change the colour each time after I paste a value, or have to retype the same info over and over.
    also, I will not be the only one inputting values and the other users may not be able to figure out these little intricacies.
    I have saved the original as a template so can I just lock the formatting on the template so as not to mess with the colours?
    thank you

    LexiBaz wrote:
    Hi Barry,
    Thank you for your idea. I have locked the original table and I am attempting to set the fill for the new table to transparent, but it is not working. I can set the fill but when I overlay the tables, the original table with colour does not show through.
    not sure why this isn't working ...
    Nor am I, although I was having almost as much trouble as you doing this tonight.
    What eventually worked was this (if my mental notes are accurate):
    Opened a new document and used the default table as the original.
    Duplicated to table to use as the 'real' table.
    Set fill of various groups of cells on the original to a variety of colours.
    Set the fill of the copy to None, using the Fill color well on the format bar.
    Dragged the copy over the original.
    As you note, the 'unfilled' cells blocked the colours in the original table underneath.
    Tried a variety of things and eventually achieved a transparent table using a color fill (yellow) and setting opacity to 0.
    But then..
    I put in a formula to place some values in the cells. It probably worked, but I couldn't see it. The Opacity control had made both the fill colour and the text colour transparent. Interesting, but not useful!
    So I deleted the copy and made a new duplicate of the (now multi coloured) original.
    I entered the formula into A1, copied, selected all the cells and Pasted.
    The paste put the formula (and the fill colour of cell A1) into all cells and showed the results.
    All of the cells were still selected, and the Inspector was open, so I used the Graphics Inspector (instead of the fill color well) to set the Fill to None. BINGO!
    The text remained black, the cells became transparent, and the colours of the original table showed through where the copy overlapped the original.
    Regards,
    Barry
    PS: The difference in order of construction of the tables shouldn't make a difference. I used the original for the coloured copy only to save moving it to the bottom of the stack.
    B

  • Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

    Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

    Sorry I did this without looking:
    Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
    This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
    Peter

Maybe you are looking for