Transposrt request for standard text

Hi,
I have made changes to a standard text in SO10. It didnt ask for any transport request. IN se10 i created a workbench request. But the task is for this request is unclassified. How would i change it to Development/correction.
Please let me know.
Ster

Hi,
Steps..
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA..
If you want to move it to another client..
Use the transaction SCC1.
Thanks,
Naren

Similar Messages

How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

Doubt in creating the transport request for "STANDARD TEXT""

HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.

HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna.

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

How to create transport request for standard web template

hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shalini

Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome

Transport req for standard text.

Hi All
How to find out the Under which request number standard text elements are stored in the smartforms.
Thanks

Hi,
As Vijay said the way you attach the standard text to tr. request is different through the program RSTXTRAN. If you want to find out under which tr. request the text is attached, go to SE09 which will display the tr. requests pertaining to a user and you can look under the tr. request.
Regards,
Ravi

Recruitment Faxing & e-mailing only possible for standard text in SAPscript

Hi,
I am using the old recruitment module PA-RC ion ECC6 and I am trying to send an email to an applicant. When I try and do this I get message "Faxing and e-mailing only possible for standard text in SAPscript". In feature WPROC I am set up to use RTF. Is there no way to send RTF emails? Do I need to create SapScripts for anything that I may possibly want to email?
Thanks
Tom

Apparently only able to carry this out in SAPScript

Language change for standard text

How to change the language of standard text.
ex; from 'EN' to 'CS'

Hi,
Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a
     transport request.
     The entries are as follows:
     R3TR FORM NAME (NAME = Name of the layout set)
     R3TR STYL NAME (NAME = Name of the style)
     R3TR TEXT OBJECT,NAME,ID,L
     (OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
     If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a
     correction.
     The transport request must be entered and released via the transport system.
Reward points if helpful
Regards.
Srikanta Gope

Smart forms. How to setup logic for standard text usage.

Hi All!
Could you advise please is there a way, except abap programming, to setup in smart forms that different standard texts values (tcode so10) to be used based on different selected parameters (e.g. customers, vendors etc... ).
e.g.
For picking list smart form:
for customer A- standard text A to be used.
for customer B- standard text B....
Thanks,
Best Regards,
Andrey
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM

HI,
Refer this thread:
Re: how to display symbols in smartforms
There is a standard smartform for invoice.
LB_BIL_INVOICE.
Refer this thread:
Re: Can anybody plz give me Smartforms print prog for Invoice/PackList
Regards,
Gayathri
Message was edited by: Gayathri Hariharan

Transport req. generation for standard text

Hi,
I have done changes in standard text in trans. SO10 and could anyone let me know like how to generate transport req. for these changes for moving the same to Quality as i didnt get any transport req. generaton while i was trying to save my changes.
Please advise.
Thanks
Naga

HI,
Don't provide any value to this field 'Name of correction '
Name of correction - blank
Text key - object    - TEXT
Text key - name    - <Object name created in SO10'
Text key - ID         - 'ST'
Text key - language - 'EN'
Press F8 now you can see the you Text Object
- select your text object and press enter.
- now you can see the button in application toolbar 'Trsfr text to corr' press this button
- you get the pop up window for the TR.

PDF convertion for standard text

Hi all,
Currently i am using this function module "SX_OBJECT_CONVERT_OTF_PDF",
working fine for script out puts.
but i want to convert the standard text also as a pdf file . we are using 4.0 version.
I am reading the standard text through READ_TEXT.
Please do needful.
Regards,
Giridhar P

Hi Ravi,
after reading the Standard test the file format is :
li_cnt_txt like solisti1 occurs 0 with header line.
But the OTF file is like ITCOO this structure which is having only 2 fields.
please suggest me how i can go ahead
Thank you.
Regards,
Giridhar

Formatting for Standard Texts not Applying

Hi ,
Now Ia m working on BTE's . In BTE function module I am writing some text and saving it By SAVE_TEXT. In that Iam possing all the variables Including Style Name.And I am using this standard text as a body of the email.In that email Body the Formating options are not appying.
Can anyone throw some inputs on this.
Regards,
Eswar

thanks for you response,I am sending plain text.I am facing formatting issuse .How to do formating for body of email .

Sample UIX XML requested for standard functionality

I am learning UIX XML.
Using scott's emp and dept tables, I have used the wizards to generate a UIX XML application using BC4J.
I would like to enhance the generated UIX XML.
For example...
1. The UIX XML pages that allow inserts/updates to the EMP view object. I would like to have a LOV on the dept_no field so user can use this. Typically any foreign key field to have a LOV with a lookup on the master table.
2. Also I am having some difficulty with radio groups, list items etc that are based on hardcoded values or data in the database. Have you any complete example code. The on-line documentation shows examples but not the whole code working together. Have you got a complete sample app that shows these features?
3. Have you any UIX XML examples that use FORMS containing text input items, lists, radio groups etc that ARE NOT based on BC4J...then have the event logic access BC4J and do the inserts/updates.
Thanks,
Paul.

Paul,
Like you I have been learing using the scott schema.
I too have struggled with this LOV issue in UIX-XML and UIX-JSP and BC4J-JSP. UIX-JSP can allow for a drop down list based upon custom properties in the VO and a "custom" Java class. The HOW-TO Page has an excellent example that when followed (with some tweaks to get what I wanted) the drop down list worked. I know it's not an LOV (like in Forms) but for small FK lookups drop down lists seem to be the requests of most users. But these drop down lists will not happen in UIX-XML or BC4J-JSP. Seems aierd to me but hey, I'm just learning too.
My point is that I too have asked question after question on this forum about UIX-XML or about implementing fearures of UIX-XML in other frameworks (like coulmn sorting) and have gotten zero helpful repsonses. There were some comments about how 9.0.3 would soleve some of these issues, but no one seems to be able to explain a way to show a "broken" example so that I will be elated when 9.0.3 comes out and works.
If you get an answer or some helpful pointers pelase forward them to me at [email protected]
And I apologize for making your heart get all a flutter when you saw the reply count grow by "1" only to find that it's just another loser who can't make the simple things in this IDE work.
Ed.

Transport Requests for standard SAP Objects

Is there a way we can determine the list of standard SAP objects(user exits, requirement routines, etc.) that were transported. Basically I would like to get a list of Standard SAP programs(non-Y and non-Z programs) which have been modified and transported up in the landscape.
Any help would be appreciated.
Thanks,
ALAM.

Hi,
You can find details in the table e071.
Regards
Ben

Transposrt request for standard text

Similar Messages

Maybe you are looking for