Transpot Request with return code 4 during Importing

HI All,
During importing the transport request It gave warning with 4.
IIt is with Flat File that is giving
No mapping defined for source system XMFile which ismy flat file ss.
CAn any body help me on that...
Regards,
MAdhu

Hi dear,
Yes, actually there is no need to worry, it i sjust a warning for your import ...
Nevertheless, if you see that your datasource is not connected, check that your falt file source system exists in your target system, and go to RSA1 -> Tools -> Conversion of Logical System Names, to convert the source system ...
Kind regards
Mickael

Similar Messages

Repair error in transport request with return code-0008

hi!!
I am getting error while importing a transport request by giving return code-0008.
Can anyone explain me the reason and solution for the same.
Rgds,
Ajeet.

Hi Ajeet,
Make sure that all the tasks whith in the request are released and they are in active state as well. Discuss with the owner of the CR and check all the objects are in active state and all the tasks are released. You can check with the logs as well to het more clues.
Regards,
Hari.
PS: Points are welcome.

Exception Deployer fails with return code 1603 during Acrobat XI installation

We are deploying Acrobat XI to Windows 7 clients and a percentage of them fail to execute Exception Deployer successfully and are returning the 1603 return code. I have pasted below relevant portions of the ExceptionDeployer.log file from two different computers with the same return code. Sometimes running the installation again works but sometimes it fails again with the same error code. I haven't been able to find exactly what it is that is failing or how to resolve this.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - ##################################################
4/4/2015 00:04:57 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/4/2015 00:04:57 [WARN] ExceptionDeployer - Failed to initialize the TokenResolver properly.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - **************************************************
4/4/2015 00:04:57 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/4/2015 00:05:59 [INFO] ExceptionDeployer - The process return code is (1603).
4/4/2015 00:05:59 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/4/2015 00:05:59 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - ##################################################
4/6/2015 16:05:56 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/6/2015 16:05:56 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/6/2015 16:07:14 [INFO] ExceptionDeployer - The process return code is (1603).
4/6/2015 16:07:14 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/6/2015 16:07:14 [INFO] ExceptionDeployer - **************************************************

Hi ohtesw,
Please check out this document: Error 1603: A fatal error occurred during installation.
If the solutions in that document don't do the trick, please let us know.
Best,
Sara

Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12

Hi,
When we are doing an import, a particular transport fails with the error message
'Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12
We are not able to determine, why its failing. If you guys have come across this error message, can you please let me know how you resolved it?
Thanks,
Sri

Hi,
Pls attach error file with this.
Regards,
Payal Patel

Transport Request Ended with return code: === 12 ===

Hi
Good day to you.
We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
Execution of programs after import (XPRA)
Transport request   : DBWK901288
System              : PBW
tp path             : tp
Version and release: 340.16.37 640
Post-import methods for change/transport request: DBWK901288
     on the application server: sapbwpd
Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
Post-processing taking place in client 300
Import carried out using RFC destination PBWCLNT300
Communication error: Destination PBWCLNT300 -> long text
Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
The errors affect the following components:
     FIN-FB (Financials Basis)
Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
Post-import methods of change/transport request DBWK901288 completed
       Start of subsequent processing ... 20081029144344
       End of subsequent processing... 20081029144351
Execute reports for change/transport request: DBWK901288
     on the application server: sapbwpd
There are no reports to execute
Execution of programs after import (XPRA)
End date and time : 20081029144351
Ended with return code: ===> 12 <===
Regards
Siddique

Hi Siddique,
Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
See also the note 644610.

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

Importing error Ended with return code: === 8 ===

Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request   : BD1K901543
System              : BP1
tp path             : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
Sridhar

Hi Sridhar,
        I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

-Support package-Test import---Ended with return code: === 8 ===(Urgent)

Dear all, using -
>   SAP ECC 6.0 with IS - AFS 6.0
Environment -- Win2k3 with Orc 10.2
Kernel              700 - 75
Spam/Saint -     70026
R3trans -d         <0000>
STMS is very consistent.
Met all the pre-requisites when applying Support packs & going succesfull
but
While applying
Sapk-60004inafs CRT with sapkh 60009,10,11 in
Test_import phase it is showing the following error for
sapkh 60010.
Test import
Transport request   : SAPKH60010
System              : MBD
tp path             : tp
Version and release: 370.00.09 700
R3TRPROGJ_1IRUTZN was repaired in this system
R3TRPROGJ_1IRUTZN was repaired in this system
Test import
End date and time : 20080410100230
Ended with return code: ===> 8 <===
When im runing with 700-75 is it possoble to import latest TP
<SAR tp_145-20001354.sar TP 145 Info 3317 30.01.2008 >
in to existing kernel. plaese coment on this as i think it's a TP error.
please also advice me in different areas.
Cheers,
Rahul

HI thanx a lot ,
It the same procedure i did & checked your message indicating the same steps .
Yes ,standard object is repaired in system & im not aware of that
& even it is not shown that it is recorded to work bench change request when i started applying the support pack.
I did the same went to SE03 selected the object .
Selected lock overview
Identified the change request & released it.
I got one more doubt what happens when i set the object to repair flag.
Cheers ,
Rahul

Regarding return code 8 while importing trnsport request

hello friends,
i have encountered a problem while importing a transport request.
in log display the message is like this
ended with return code 8.
there is a syntax error in line no 5 of saplz_xxx_xxx program.
include program lz_xx_xx not found.
actually it is a function group, there is an include program at line no. 5.
how to solve this problem.
will it throw any error if the fg is stored in $tmp.
the function group concerned is stored in a customized package.
i hope to get a perfect answer.
thank you.
regards,
karteek.katta

Karteek,
Your include program at line 5 is missing in the target system and hence the error.
Just check the package of that include program and if it is not $tmp, check that this program is locked in which request ?
Transport that request to your target system and thereafter re-import your original transport and it will be success.
BR
Diwakar

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj Jain

Hi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain

Return code 8: while importing req in target system

Hi friends,
i created one transport request for transporting custom appset to quality system.
while importing in quality i'm getting request status in red . checked log:
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: xxxxxxxxxxx
Post-processing taking place in client 999
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet XXXX in Client 999 for RFC
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step APPS_ADD completed without errors
Import Step DIM_ADD completed without errors
Characteristic /CPMB/NUD8H9B: Lower case makes selection of char. values difficult
Attribute /CPMB/MBRSEQ from characteristic /CPMB/NUD8H9B not (actively) available
Error in activating the InfoObjects
Failed to activate SAP NetWeaver BI InfoObject for dimension
Failed to create dimension attribute
End of after import methode RS_APPS_AFTER_IMPORT (Activation Mode) - runtime: 00:02:32
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: xxxxxxxx
      Ended with return code: ===> 8 <===
Return code 8 means:
8: Transport carried out with errors.
Individual objects could not be transported successfully.
Examples:
- The original object was not overwritten
- A repaired object was not overwritten
Could anyone eloborate usage of ujs_activate_content? we are on bpc75nw sp04
any suggestions pls to import request correctly.
Is there any specific steps to be followed for importing requsts in target system or just to import requests?
thanks.

hi Gersh,
I checked in dev system, infoObject /CPMB/NUD8H9B and its' attribute/CPMB/MBRSEQ. Both are active and infoObject /CPMB/NUD8H9B is under infoarea "custom appset".
But if i check it in target system both are inactive status and infoObject /CPMB/NUD8H9B is under unassigned node infoarea.
When i tried to activate infoobject via sap program, system couldn't do that and saying attribute is not in active state. Like wise several /cpmb/xxxxxx infoobjects are in status "inactive".
Do i need to activate standard appshell via ujs_activate_content program in order to activate all /cpmb/xxxx related infoobjects.
Or can i follow method of delete custom appset from target system and shadow table contents in source system. Then freshly creating new req in dev system. Is this solves my problem?
any suggestions pls.
thanks

ERP2005 SPS10 Return code 8 during TESTIMPORT

Good day,
I am having an issue whilst trying to import ERP2005 Support Stack 10. Sorry, not sure whether this is the correct place for this message?
During the TESTIMPORT phase I am getting return code 8 for import of the following packages with error:
SAPKE60017 (SAP_HR) - R3TRPROGMP002700 is in repair status, therefore cannot be imported.
SAPKH60008,09,10 (SAP_APPL) - R3TRFUGRF040 is in repair status, therefore cannot be imported.
SAPKB70011 and 12 (SAP_BASIS) - R3TRFUGRSZA1 is in repair status, therefore cannot be imported.
Procedure is to release the relevant repair and repeat the import.
Some errors I know can ignore according to note 822379 but I can't find any material relating to above anywhere. Also, I have asked developers to check to find requests with above objects and release them but they have no luck ?
Using kernel 700.102 as recommended with MaxDB 7.6.3.007 running on SLES9 SP3.
Any help much appreciated.
Thanks,
Nelis
Message was edited by:
Nelis Lamprecht

Refer to note9949. Seems even though the requests were released these objects were still flagged as being in a repair status. Re-setting this flag corrects the problem.
Thanks

Error in transport, ended with return code: 12, job RDDEXECL cancelled

Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.

Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh

Test call of transport control program (tp) ended with return code 0200 Message no. TK094

Hello Expert,
My SAP System environment as follow
SAP Product : SAP NetWeaver 04
Operating System : Windows 2003 32 bit
SAP Database : MS SQL 2005 32 bit
I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
Trans --> Log
1 ETP199 ######################################
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order     : "SFDK905838"
1 ETP102 system              : "SFD"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.16.72" "640"
1 ETP198
2EETP128 No target system defined. "SFDK905838" is not a transport request.
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time   : "20140602150208"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
Steps for Reconstruction
# Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
# Reconfigured the TMS
# Full User Permission has been set to all SAP Directory.
Rgds,
Ashok

Hi Ashish,
I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
SLOG as below.
ERROR SFDK905832           SFD f 0012 20140602090930 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602093923 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602094059 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602102854 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602103633 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602104142 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602111140 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602112723 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113109 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113704 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113722 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113753 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113809 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905834           SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905834           SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW
START EXPORT PREPARATION   SFD e      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
START tp_getprots          SFD E      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
STOP tp_getprots          SFD E      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
STOP EXPORT PREPARATION   SFD e      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
ERROR SFDK905836           SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905836           SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905842           SFD f 0012 20140603091826 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603152403 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603152753 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603153518 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162013 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162544 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162639 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162755 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603163347 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603163740 default_user A559420      SSC2PAS3SFWBW
Rgds,
Ashok

Transpot Request with return code 4 during Importing

Similar Messages

Maybe you are looking for