Transpotation

Hi gurus.
I want to create a transport request in se01 .PLease tell me the process . ?

Hi,
In Tcode SE10 create (F7) request .
Assign all your objects to that request no.
when ever u save any object in the packages
other than $tmp
it will ask you to create a request number
or assign an existing one.
there will be an option to create the request number
click that and give any meaning full description....
it will generate the number
which will look like
EDDK955566
where EDD is the system id
k is differentiator
number is some sequence number
aslo it will create
EDDK955567 as the child request number
go through this link for ref:
[transport request;
Transport request will be created for the customization/configuration and developement objects (based ont the system setting by BASIS team), Transport request will not be created for Masterdata creation  or Transaction data creation.
To get the pop-up screen for the every change in the customization, you have to go to transaction SCC4 & have to set the 'Automatic Recording of Changes' for the client in which you required the pop-up at each time

Similar Messages

  • About  ware house management/transpotation management

    hello sap gurus,
                  i this is mohan in need of material/documents or details/suggetions about topics of ware house management&
    transpotation management relavent to SD module. please forward ur views to d mail id [email protected]
    with regards
    mohan

    hello sap gurus,
                  i this is mohan in need of material/documents or details/suggetions about topics of ware house management&
    transpotation management relavent to SD module. please forward ur views to d mail id [email protected].
    with regards
    mohan

  • What is transpotation,what  are the step for transpotation

    hi
    i am very poor in transpotation can anybody clear the transpotation role and how to transport data between two different functional groups step by step if u have any screen shots explaining the steps i would be greatful to u
                                            thanx in advance
                                                                                    rajesh

    Hi
    >Transportation planning and shipment completion using a new organizational unit, the transportation planning point.
    >Basically, the transportation planning point consists of a group of employees responsible for organizing transportation activities.
    >Each shipment is assigned to a specific transportation planning point for transportation planning and shipment completion.
    >You must define the various transportation planning points used in your organization in Customizing for Corporate Structure before they can be used to perform transportation functions.
    > You can define this organizational unit according to your company’s needs, for example, according to geographical location or mode of transport
    Refer this link:
    http://help.sap.com/saphelp_bw33/helpdata/en/f9/80b54ea47211d285090000e8a57770/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    https://www.sdn.sap.com/irj/sdn/forums
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/content.htm
    Points if helpfull
    Regards
    Neni

  • TRANSPOTATION  REQUEST

    WHAT IS THE TRANSPOTATION REQUEST?

    hi Kumar,
    welcome to SDN ...
    transport request recorded changes done in sap system, used to move objects from one system to the other
    more detail take a look
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Re: Transport Organizer---
    transport query (bex objects)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    hope this helps.

  • Pls provide the screen shoots of transpoting script by using SCC1

    Pls provide the screen shoots of transpoting script by using SCC1

    Hi,
    When you create a SAPScript in one client, it will ask for transport reuqest. You create that transport request.
    Now you go to the client where you want to move the SAPScript. Go to transaction SCC1.
    Enter your
    - source client
    - transport request here and just hit 'start immediately' button
    Regards,
    RS

  • Error in transpoting info object

    Hello,
    Need help to solve this please!
    I am getting an error while tranporting an info object!
    Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
    Message no. R7195
    Diagnosis
    Possible causes:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me please!
    Regards
    RAm

    Hello,
    Help me to solve this !
    I cant transport the info object !
    It says:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me!!
    Regards
    Ram

  • Unable to execute the query after transpoting to Quality in BI7.0

    Hi Friends,
    We are facing problem while executing the query in BI 7.0 after transporting to Quality system.
    Whenever we are clicking on the query in Analyser after transporting to quality, it is throwing an error like "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION" and " system error in program SAPLRRI2 and form DIM_FAC_SRDATE-02" and it is disconnecting from BI system.
    The transport went successfully to quality system.
    Please do the needful regarding the above errors.
    Thanks
    Rama

    Hello,
    I resolved the problem. I removed all the variables in the query did another "Query Check" and the error message was clearer.
    There were missing infobjects in the Multi-Provider.  When I fixed this the error was gone.
    Thanks.

  • Transpoting problem from BI DEV to BI QA

    Hi ,
    (SAP_BW Patch :16  , BI_CONT :8)
    We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
    now im trying to transport master data (that is infosources ,UR and transfer rules.)
    im collecting the objects in the following manner.
    Ex:0CUSTOMER
    Grouping :in data flow before
    collection mode : automatic
    Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
    Conversion of logical system namesin Dev i didnt maintain any thing
    in QA i ve mainted Conversion of logical system names as
    *Original S S Target S S
    BI DEV  -  BI QA
    R3 DEV  -  R/3 QA
    I havnt chkd the box 7.0.
    Assgnment of source system to source system id
    here i clicked on suggest source system ids
    i ve AU and AU.
    Even i did a trail with transporting the request to QA but no luck it ended with error 4.But not getting Transfer rules in Quality.But I am getting only infosources and update rules only in quality.
    Regards,
    Gupta

    Hi Guptha,
    Before ding uch transports first transport the DS from Dev to R/3 then replicate them and then try to transport Transfer rules. I hope it may solve ue rpoblem.
    Regards,
    Rajkandula

  • IDoc problem after transpot

    Hi all,
    I have transported my XI scenario from Dev to Test (file transport), and now i have problems sending IDocs from R/3 to XI.
    My questions is weather I have to reimport my "imported objects" (IDocs) ? It seams like thay altså have been transported, though - since they appear in my test system.
    Thank you /Thomas

    Thomas,
    regarding to change objects: (delete...)
    go to SWCV, where u have imported ur IDoc, dbl click to see namespaces. In the bottom, there is a checkbox - "objects are modifiable". Is it checked?
    Why Idocs don't work?
    Well, you moved the scenario objects, however, don't forget, that for IDoc communication there must be some settings done - partner profiles, ports, (standard ABAP AS settings for Idoc exchange)... If you moved just objects and didn't do this settings, of course, it won't work...
    Peter
    Message was edited by:
            Peter Jarunek
    Message was edited by:
            Peter Jarunek

  • Regd: Question in Transpotation and Monitoring

    Dear All,
    What are the Common or possible Question will be facing in Interviews in Tranpotation and  Monitroing... For eg: if will check DB02  what we will check and what steps we will take etc... or ST04 what we will do.
    2) What are the Steps to Create Transport Group and its Advantages.
    Regards
    SNB

    Hai,
    Go through this.....
    <b>1.     What is transport domain?</b>
    A transport domain comprises all SAP Systems jointly administrated through the TMS(domain controller).
    <b>2.     What is transport group?</b>
    Group of SAP systems which are having common transport directory.
    <b>3.     How do you configure the TMS?</b>
    You must define which R/3 Systems in the system landscape should be combined in a transport domain and which R/3 System is to be the transport domain controller
    Refer Xerox book
    <b>
    4.     What are the transport routes?</b>
    A route between any 2 SAP systems in a land scape. Can be a consolidation or delivery path.
    Consolidation – between development and quality
    Delivery – from quality to production
    <b>5.     How do you do the transports?</b>
    The transport routes are used to define in which target system
    You want to consolidate and deliver change requests.
    Transport request will be released in the source system and are imported in the destination system.
    SE09 and SE10 are used to release the Transport request
    STMS – used to import the request.
    In OS level use program tp.
    Syntax – tp import <SIDXXX> <SID> clientXXX ux
    <b>6.     What will happen during the export process?</b>
    Files will be created in the OS level in the transport directory
    R…… - data files
    K…… - control files
    transport directory – usr/sap/trans/data
                        usr/sap/trans/cofiles
    <b>7.     What will happen during the import process?</b>
    Datas will be imported in to the database. Get in to usr/sap/trans/bin
    Syntax – tp import <SIDXXX> <SID> clientXXX ux
    <b>8.     What type of files are created duing the export?</b>
    R…… - data files
    K…… - control files
    <b>9.     What are the problems usually occurs during the transport and what is return cods?</b>
    Refer book.
    0 – succ
    4- warnings
    8 – error
    above 8 – different types of errors
    <b>10.     How do you configure transport profile?</b>
    The transport control program requires a transport profile that contains information about
    establishing the database connection for all R/3 Systems in the transport domain. TMS generates and manages this transport profile as a part of the transport domain configuration. You do not have to adjust the transport prof ile using operating system functions.

  • Transpotation among three servers .

    Dear Guru ,
    I am New in Sap Basis , I have three servers .
    DEV , QUT , PRD.
    in DEV I have create 200 client which in a copy of 001 client . After configuration in Development server . I need to create
    300 Client in QUT server . using SCC4  T.Code .
    My question in that
    i)Should 300 is also a copy of 001 client . then transport the all request .
    ii)300(QUA) is a copy of 200(DEV) client Using Export and import.
    or something else .
    Please inform me the actual process of DEV , QUT , PRD.
    Thanks & Regard
    SAURAV KUMAR

    Hi Saurav,
    here are the answers to your queries:
    1. Should 300 is also a copy of 001 client . then transport the all request .
    --> is your system PI? it is recommanded for PI system to perform local client copy with source client as 001. else for new client creation , consider source client as 000.
    refer link , useful to perfom this operation:
    http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c5b4ba111d189750000e8322d00/frameset.htm
    Once you create a new client 300, dont be in hurry to migrade transport requests of development system . If you have decided to make Qua-300 client copy of Dev -200 client , then there is no need to seperatly import TRs,
    2. 300(QUA) is a copy of 200(DEV) client Using Export and import.
    or something else
    --> there are 2 ways to copy client accorss the system.
    a. client export import : it uses STMS configuration method and respective transport request need to migrate
    b. remote client copy : it uses RFC destination details to perform copy. in this method both source (Dev-200) and destination (qua-300) shuld be locked while performing the copy.
    http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
    Regards

  • Probelm in transpoting Cmod Coding in ECC

    Hi All,
    We are transporting C Mod coding request to ECC Quality system for the first time.We have collected the coding in request and transported to quality but in quality system Iam not able to fine the project in which we do cmod coding, Is there any procedure to be followed to transport cmod coding in ECC for the first time.
    Reagrds
    Albaik

    Dear Albiak,
    First of all ,it is not recomended to create local request in  Quality system.
    Reason why it is recomended to create local request in  Quality system is: When ever we crete same cmod objects in Development and moved to Quality at that time it will lock the objects creted in Q system.
    And we have follow the sequence of all transports with same domain id and it should follow till production.
    Any how for moving objects from one system to another system, we have few check list items for validation.
    1) We have one common package for moving all the required Transports in a group.
    2) After assignement , validate the transport in se09. i.e. validate all the objects assigend properly or not..
    3) Do consistency check up.
    4) Release the transport request befor importing into traget system.
    Hope this info may give you some light on your trsnaport.
    Cheers,
    Maruthi

  • Object not modifiable in Transpot

    Hi All,
    I am trying to change an object (EQUIP_NR) in SAP.
    It throws an error message " The object is locked in a Transport Request (TR), The TR is in modifiable status.".
    But when I tried to release it from that TR are it is not working and I am getting error message "This TR can only be changes via client 300.
    Unfortunately that Client doesn't exits in our system moreover the user itself is not registered.
    Regards
    Ramky

    Hi,
    note sure how is your question related to security. Anyway, you can easily change owner of transport in SE10. The easiest way how to solve problem with source client is to create a new transport and put all objects from the original transport into it. You can also exclude unwanted objects during this step.
    Cheers

  • Transpot error" system error  in lock managment"

    Hi ,
    When Iu2019m transporting  infoobjects from BI DEV to BI Q while importing its showing u201Csystem error in lock managementu201D.
    When I drill down   the error its showing the following message.
    Message no. AD025
    Diagnosis
    A system error has occurred in the lock management function.
    The system was unable to determine whether a lock entry existed for the selected object.
    System Response
    The selected object could not be locked.
    Only display mode can be used.
    Procedure
    Make a note of the error code and inform your system administrator
    And In the error its not showing specific infoobjects ,when I searched forums I got one note 928044, but I skeptic that it works .
    Please provide some inputs ASAP.
    Thanks
    chaitu

    You didn't mention whether you are seeing this error message while building the transport/request or at the time of applying on BIQ....
    Anyways, if you are seeing this message while trying to create a new transport for your infoobjects:
    Please make sure all your infoobjects are not in any other *open" requests already? That is, if you have any other requests that are still open, try "releasing" them before trying to create the new transport/request.
    Hope this helps.

  • Problems when releasing transpots

    Hi,
    I get the following error message when releasing transports in my SLOG file:
    FATAL No stdout redirectio <SID> 0000 20070810145629              TMSADM       <hostname>.
    this causes the export to fail.
    Does anyone know what the cause might be.
    thanks.

    Within TMS, tp via RFC redirects all standard output into file dev_tp.
    Please change the permissions of /usr/sap/PRD/DVEBMGS00/work/dev_tp
    file, at least it must have 666
    Also check that user <sid>adm has the correct authorization/ownerships.
    In addition, please download from SAP Service Marketplace, alias
    /patches  the latest versions of TP, R3trans, R/3 kernel patch and
    database library.

Maybe you are looking for