Transtive Attributes

Hi Experts,
presently we are doing an Implimentation Project, in that i am using Transtive attribute. I am working on PS module for that i am using 0PS_C04 Cube and 0CO_OM_NWA_1 DataSource. In that 0ACTIVITY is field for that Work Centre is one  Attr for Work Centre - Cost centre is one more Attr and for Cost Centre-  Profit Centre is one more Attr. So, now issue is that i have to read the those Profit Centre. Can anybody give a suggetion for me how read this and how to create it.
Thanks in Advance.
Suren

Suren,
If have master data loaded, i suggest you to fill the data for these in the infoprovider while loading the transaction data using the option in update rules 'atribute of masterdata IO' instead of making them nav attributes and using them in the report.

Similar Messages

  • Exclusive attributes and compound attributes

    hi
    i want to know wat r exclusive attributes ,compound attributes and transitive attributes.

    Hi,
    Compounding attributes are superior Attributes .
    The following link will give you the Compounding Wwith Example :
    http://help.sap.com/saphelp_nw70/helpdata/en/6f/c7553bb1c0b562e10000000a11402f/frameset.htm
    Transtive Attribute : This is it self is a Display attribute.
    Ex :
    0EMPLOYEE  ( Say as "A")
           - >  0EMPNAME (Attr of 0EMPLYOEE) ( Say as "B" )
                     -> 0EMPDSG ( Attr of 0EMPNAME)  ( Say as "C" )
    As per the aove example "B" is attribute of "A" and "C" is attribute of "B".There is direct relation between A & B and B& C.Be coz of B is denpendent on "A" C will also have dependent on "A" indirectly.So in this case we will call "C" is Transitive attribute of "A".
    Regards
    Ram.

  • Infosource to be used for both Direct update and Flexiable update

    Hi,
      I had a Data source 0CUST_SALES_ATTR.
      A infosource is created Direct Update of Master Data from DS:0CUST_SALES_ATTR to 0cust_sales.
    So the Data source 0CUST_SALES_ATTR is being used to load ATTR data of 0CUST_SALES.
    Now as per my requirment created a new Z infoobject to use for Transtive attributes....How can i use the same data source 0CUST_SALES_ATTR to load 0CUST_SALES (Direct Update) and the new Z infoobject using Transfer & Update rules.
    and
    Question:
    Will it be possible to switch the current Infosource with direct update to Flexiable update with out deleting the Transferrules as there are lot of routines in the transfer rules
    Thanks
    Edited by: suser1234 on Oct 5, 2010 11:21 AM

    Hello Sir,
    How did you handle your above problem I am into a compeltely similar situation. Your help would be appreciated if you can share the approach you followed.
    Thanks,
    -Su

  • Some Interview doubts......

    Hi Gurus,
    Please clarify the below mentioned queries:-
    1) can we use line item dimension and aggregates on the same InfoObject.
    2) can we create direct and flexible update for one InfoObject.
    3) How to add text to existing masterdata.
    4)  For memory allocation error what we will do
    5) For creation of Generic extractor through function module what are the check points going to check in R/3 side.
    6) 10 conditions and one exception can we use together in a report. by this any performance  issues....
    7) How to create virtual K.F. and where to place and how values are populates to this...
    8) How to use Transtive attributes in query level --explain me step by step and how data populates to Transtive attributes...
    9) How to set delta for Lo extractors in LBWE IN R/3 SIDE---step by step after init runs in bw side
    10) If delta fails How to get the Historical data of the same for 5 days....How the delta pointer will secure,,,,,
    Thanks in advance for your help.
    compulsory I will assign the points.
    Thanks & Best Regards,
    Kumar.

    Hi,
    1.we can use line item dimesnion and aggregates on the same info object. But If you are dealing with a line item that has many characteristic values, the aggregate can become as large as the InfoCube. This means that there is probably no advantage in having an aggregate in this case.
    2. For characteristics, attributes or texts, a combination of flexible and direct updating is only possible for different source systems.
    3. Just goto the corresponding Info object screen and u need to enable the check box called With texts.
    4. U need to inform BASIS to increase the table space.
    5. U should make clear whether the Delta is based on Timestamp, Calendar day, or Numeric pointer and u have to make sure about the Safety interval limits.
    6. we can use, not sure about the performance issues..
    7. Virtual key figure is a run time dynamic.A special case in which the option Using Cache Despite Virtual Characteristics/Key Figures could be useful, for example, is the use of a variable for a virtual characteristic with which the end user in reporting can select constants as the basis for currency translation types. SAP enhancement is: RSR00002 .There is a good How to document in SDN..u can check that.
    8.Not sure...
    9. after the set up tables, next delta is going to populate based on V1 /V2/V3 update, V1 is synchronous update, V2 is Queued delta, V3 is Unserialised Delta.
    10.u can one option as repeat delta,

  • Get Attribute values from a page and procedure exception handling?

    Hi All,
    I have created new page with two input attributes not based on any VO. This page is created to capture two values and pass these to an AM method upon pressing OK button. The method in AM will call a procedure with two in parameter expecting the two values captured from the above said page.
    I have two questions, first one how to capture the values entered by the page in the controller class and advises me how to handle exceptions when my procedure fails.
    I can not use something like this since this page is not based on a VO
    String fromName = (String)vo.getCurrentRow().getAttribute("FromName");
    Do I have to create a dummy VO like select '' name1, '' name2 from dual?
    Thanks for the help.

    Hi,
    Actually you can capture the parameters on the page like this way
    String test = (String)pageContext.getParameter("id of the text input bean");
    Now in procedure you can take an out parameter which stores the error messages on exception
    and return that out parameter in java.
    and then you can throw exception on page using OAException class.
    Thanks
    Gaurav Sharma

  • Encrypted="true" does not encrypt MBean attribute

    Hi,
    I have developed a Custom Weblogic Security Service Provider. I have also created
    an MBean
    to manage my provider. One of my MBean attributes is as follows:
    <MBeanAttribute
    Name = "JdbcPassword"
    DisplayMessage = "The JDBC Password to the security database"
    Type = "java.lang.String"
    Writeable = "true"
    Encrypted = "true"
    Default = ""password""
    />
    I have specified Encryped="true" above, however, the value I put in the Weblogic
    Console
    is still seen in cleartext in the config.xml. Why isnt it being encrypted? Or
    do I misunderstand
    the purpose of the Encrypted attribute?
    Thanks,
    Proneel.

    "Proneel Guptan" <[email protected]> wrote:
    >
    Hi,
    I have developed a Custom Weblogic Security Service Provider. I have
    also created
    an MBean
    to manage my provider. One of my MBean attributes is as follows:
    <MBeanAttribute
    Name = "JdbcPassword"
    DisplayMessage = "The JDBC Password to the security database"
    Type = "java.lang.String"
    Writeable = "true"
    Encrypted = "true"
    Default = ""password""
    />
    I have specified Encryped="true" above, however, the value I put in the
    Weblogic
    Console
    is still seen in cleartext in the config.xml. Why isnt it being encrypted?
    Or
    do I misunderstand
    the purpose of the Encrypted attribute?
    Thanks,
    Proneel.Hi Proneel,
    Could you please tell me what version of Weblogic are you using?
    Thanks,
    Carmen

  • Not able to open Modal Page through a report attribute link

    Dear All,
         Not able to open Modal Page through a report attribute link, kindly help me...
      I am using skill builders modal page plugin ...
    Thanks and Regards,
    Madonna

    Here's what you have to do.
    You set up your column link like this:
    Link text: whatever you like
    Link attributes: onclick="return false;" class="open_modal"
    Target: Page in this application
    Page: number of the page you want to open in your modal window
    You set up your dynamic action like this:
    Event: Click
    Selection type: jQuery selector
    jQuery selector: .open_modal
    (notice the dot at the beginning!)
    Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
    Event Scope: Dynamic
    And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
    And that's pretty much all it takes.
    Hope this helps.

  • How to use attributes from different context nodes in one view?

    I am VERY new to the concept of CRM and currently working on creating an alternate version of the BP_HEAD_SEARCH. With help from SAPPRESSs book 'SAP CRM Web Client' i was ble to create my own simple Z-component.
    However after going back and forth the book and the forum (including this [article|https://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]) i was not able to find a solution to my problem. My current search uses BuilHeaderAdvancedSearch as context node for searching. But the search should also be able to use attributes from BuilActivity, which is directly related to BuilHeader. I can't seem to find a way to get attributes from BuilActivity into the search window of my component without having to change SAP-Standard.
    Is this really the only way? Please advise on possible code and insertion point.

    Any suggestions?

  • How do I set the mailhost attribute in Messaging Server 3.5?

    <B>Intent of the hostname aliases feature: </B><BR>
    In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
    instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
    want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
    the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
    you want to be able to move a group of users quickly from one Messaging Server to another.
    <P>
    <B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
    Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
    have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
    MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
    /etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
    server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
    installed.)
    <P>
    With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
    colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
    colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
    (MessageHostName), and if they match, the server considers the account to be local. <P>
    For example: <BR>
    MessageHostName=red.company.com,green.company.com,blue.company.com
    <BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
    entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
    wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
    <P>
    In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
    blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
    DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
    red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
    not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
    in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
    be considered local to this machine.
    <P>
    Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
    MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
    16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
    migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
    attribute is recommended.
    <P>
    In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
    on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
    server, i.e. host.company.com
    <P>
    </A>A note about DNS
    Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
    A 128.101.101.101
    CNAME
    <P>
    Additional MX records are not required to use hostname aliases.
    <P>
    If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
    Cricket Liu.

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    See "Firefox connection settings":
    *[[Firefox cannot load websites but other programs can]]

  • Error while creating Attribute In BPM Object

    Hi,
    I am getting error while creating attributes in BPM Object.I am not able to open BPm object. while opening I am getting Below error.
    Please suggest.
    java.lang.StringIndexOutOfBoundsException: String index out of range: 28
         at java.lang.String.charAt(Unknown Source)
         at fuego.type.TypeFactory.createFromName(TypeFactory.java:482)
         at fuego.type.TypeFactory.forNameLazy(TypeFactory.java:263)
         at fuego.lang.CollectionTypeDescription.getIndexTypeRef(CollectionTypeDescription.java:146)
         at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:355)
         at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
         at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:344)
         at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
         at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:106)
         at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:94)
         at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:78)
         at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:612)
         at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:605)
         at fuego.ui.peer.swt.SwtTable$SwtTableModel.getColumnText(SwtTable.java:956)
         at org.eclipse.jface.viewers.TableColumnViewerLabelProvider.update(TableColumnViewerLabelProvider.java:70)
         at org.eclipse.jface.viewers.ViewerColumn.refresh(ViewerColumn.java:135)
         at org.eclipse.jface.viewers.AbstractTableViewer.doUpdateItem(AbstractTableViewer.java:386)
         at org.eclipse.jface.viewers.StructuredViewer$UpdateItemSafeRunnable.run(StructuredViewer.java:466)
         at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
         at org.eclipse.core.runtime.Platform.run(Platform.java:857)
         at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:46)
         at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:199)
         at org.eclipse.jface.viewers.StructuredViewer.updateItem(StructuredViewer.java:2026)
         at org.eclipse.jface.viewers.AbstractTableViewer.internalRefreshAll(AbstractTableViewer.java:695)
         at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:633)
         at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620)
         at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1433)
         at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1368)
         at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1330)
         at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1431)
         at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:536)
         at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1390)
         at fuego.ui.peer.swt.SwtViewer.repaint(SwtViewer.java:59)
         at fuego.ui.peer.swt.SwtColumn.setLabelProvider(SwtColumn.java:89)
         at fuego.ui.Column.setLabelProvider(Column.java:82)
         at fuego.designer.XObjectComponentStructurePanel.buildUI(XObjectComponentStructurePanel.java:299)
         at fuego.designer.AbstractEditor.build(AbstractEditor.java:542)
         at fuego.designer.AbstractEditor.init(AbstractEditor.java:133)
         at fuego.designer.XObjectComponentStructurePanel.<init>(XObjectComponentStructurePanel.java:126)
         at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.createStructurePage(BPMObjectMultipartEditor.java:581)
         at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.addDefaultPages(BPMObjectMultipartEditor.java:464)
         at fuego.eclipse.studio.multipageeditor.ExtendedMultiPageEditorPart.createPages(ExtendedMultiPageEditorPart.java:399)
         at fuego.eclipse.studio.multipageeditor.eclipse.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:253)
         at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
         at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:426)
         at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
         at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:299)
         at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:179)
         at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
         at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
         at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:400)
         at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
         at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209)
         at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1604)
         at org.eclipse.ui.internal.PartStack.add(PartStack.java:499)
         at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103)
         at org.eclipse.ui.internal.PartStack.add(PartStack.java:485)
         at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112)
         at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63)
         at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:217)
         at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:207)
         at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:774)
         at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:673)
         at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:634)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2737)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2651)
         at org.eclipse.ui.internal.WorkbenchPage.access$13(WorkbenchPage.java:2643)
         at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2595)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2590)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2574)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2557)
         at fuego.eclipse.ui.DefaultEditor.open(DefaultEditor.java:65)
         at fuego.eclipse.studio.EclipseWorkbench.createEditorFromResource(EclipseWorkbench.java:529)
         at fuego.eclipse.studio.EclipseWorkbench.createEditor(EclipseWorkbench.java:297)
         at fuego.designer.action.OpenCatalogNodeAction.open(OpenCatalogNodeAction.java:91)
         at fuego.designer.action.OpenCatalogNodeAction.run(OpenCatalogNodeAction.java:55)
         at fuego.eclipse.ui.EclipseAction.run(EclipseAction.java:180)
         at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
         at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
         at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
         at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
         at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
         at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
         at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
         at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
         at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
         at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
         at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
         at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
         at org.eclipse.equinox.launcher.Main.run(Main.java:1173)

    When you say you're having trouble "opening" the BPM Object, is it possible you instead mean you're having trouble expanding the BPM Object?
    Just a guess, but if you're having trouble expanding the BPM Object I'd suspect that the object's xcdl contents might be corrupted. You might want to consider exporting and saving a backup of the project and then try deleting the object from the Project Navigator. Rebuild the BPM Object once you've deleted it.
    Dan

  • Using a Variable in HttpService url attribute

    I have a dynamic url defined below
    public var forecastURL:String = "
    http://www.weather.gov/forecasts/xml/SOAP_server/ndfdSOAPclientByDay.php?lat="
    + latitude + "&lon=" + longitude +
    "&format=12+hourly&startDate=" + todaysDate +
    "&numDays=" + numberDays + ""
    I would like to use the var without the {} bind. The compiler
    complains if the url is not surrounded in quotes. This should be
    simple? How can I use a var within the url attribute without the
    bind brackets?
    <mx:HTTPService
    id="forecastRequest"
    url = "{forecastURL}" result="resultHandler(event)"
    />

    Not Possible..why don't you use the subtitle box instead of help url?

  • Error while adding a attribute to the the Custom view through a wizard

    Hi ,
    I have created a new custom view with value node through wizard  succesfully.
    Now I want to add a new attribute to that node.I am trying to do that by a wizard.
    But i am getting the follwing error " Error during analysis of Source Code" although i have
    commented or removed my all custom code from that view.
    I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
    "GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
    Plz help me with this asap.
    Regards,
    Sharad

    Hi Sharad,
                          I hope all your classes are active. In case you want to add a new attribute there are two steps.
    1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
    2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
    By using any of the two approaches you will be able to see teh new field in the configuration.
    Hope this helps.
    Regards,
    Ruby.

  • Assigning a String Value to the value attribute of html:file

    Hi,
    we facing a problem while assigning a value to the VALUE attribute of file tag
    <html:file property="fileupload" size='25' value="sample.xls" onchange="callsheet()" />
    can anyone help me out plzzz,

    Two points -
    1) Java is not Javascript or HTML; you would do better to find a more appropriate forum.
    2) When you take this to a better forum, you need to describe the problem.

  • Error while genetrating gettter method on Context node attribute

    Hi,
    I am working in SAP CRM 7.0 Ehp1.Now I need to create get_p_a and set_p_a method
    on context node attribute.But while selecting attribute and clicking on right and selecting
    on generate P-Getter,getting an error (error message - View not copied or enhanced with wizard; processing not possible).
    This is a custom context node attribute and need to create gettter,setter method.
    Kindly assist on this or suggest is there any way to create method on required context node attribute.
    Regards
    Viren

    Hi there,
    Creation of Getter  Setter is not possible for the AET Generated Views and Components.
    It seems your view is generated using AET Table enhancement feature of Ehp1 and the context node is thus a based on a Z BOL object created by a feature of AET of Ehp1
    For such context node, generation of getter setters is not  possible with right click.
    If you need any of GET_ , SET_, GET_P_ or GET_V , then you need to copy the GET_P_XYZ etc method you find on context node class.
    Hope this helps
    Thanks & Regards
    Suchita

  • Mis match in attributes of item category B and Blanket PO item details

    Hi
    I could not able to create a Blanket PO with document type FO and item category B (limit).
    Normally for a blanket PO, GR is not allowed and IR is mandatory. So, I could able to see these checkboxes for GR (not set and grayed) and IR (set and grayed) in the item details of the PO in delivery and invoice tabs. But I end with an error message that 'GR is not set is used is not allowed' (exactly i don't remember but some thing like that)
    Before creating a blanket PO, I found that in 'attributes of item categories', that for the item category B, GR is set and IR is not set (in customizing-OMH4). Of course, one cannot change the attributes of item categories.
    I suppose due to this mis-match in the attributes of item categories and that in the PO, I'm getting an error message while creating a blanket PO and could not able to save.
    Also I have checked all the system messages for the message displayed. No where(i.e. in any message class or category and for that message number) I found any such message defined with error in 'attributes of system messages' for purchasing, material master, inventory, invoice verification etc.
    I suppose this error message is coming somewhere from the application program for the PO.
    So, what can be the solution
    waiting for your reply.
    thank you

    Thank you for your answer. I haven't mention this point in my thread but I have already tried this.
    I have tried matching the GR and IR controls of account assignment category with PO GR, IR controls and also with item category B, GR, IR controls. Still i am getting the same error and could not able to save the PO
    Also I have checked the field settings for PO for all categories like transaction relevant, item category relevant, etc in customizing.
    Main problem is both GR and IR controls are being grayed in PO. Other wise I could able to change them as per my wish and could able to avoid the error even though the GR and IR controls in PO are correct as per the process requirement.
    If possible, please check the GR and IR controls for item category B (in my system it showing that GR is set with binding and IR is not set with binding). But it should be reverse as per the process requirements and in limit PO it is showing correctly. i.e. with GR is not set with binding and IR is set with binding.
    thank you

Maybe you are looking for