Trap management problem

Hi,
I'm having a problem configuring traps for windows servers.
We have installed zen server management in a mixed Netware / Windows
environment. ZEN is running on a Novell OES cluster. Everything seems to
be running fine. Nodes are discovered and can be edited. However, when we
select a windows node, then select say "devices", right click that, and
choose actions -> trap configurations we only get Netware traps.
There is only one profile visible, and when we try to add another
profile,
the only thing we can add are Netware traps.
Windows and Dell open manage MIB's are compiled and are visible if we
look
ate the site configuration.
So how can we set Windows traps on windows nodes then ?
I'm sure there is a simple solution for this, but I can's see it at the
moment.
Any help is very much appreciated.
thanks in advance,
Ren Voortwist

Hoi Rene,
Hoe is het met mijn oud collega van Azlan. Alles goed verder?
Waar ben je op dit moment werkzaam?
Grt Robbie
> Hi,
>
> I'm having a problem configuring traps for windows servers.
> We have installed zen server management in a mixed Netware / Windows
> environment. ZEN is running on a Novell OES cluster. Everything seems to
> be running fine. Nodes are discovered and can be edited. However, when we
> select a windows node, then select say "devices", right click that, and
> choose actions -> trap configurations we only get Netware traps.
> There is only one profile visible, and when we try to add another
> profile,
> the only thing we can add are Netware traps.
> Windows and Dell open manage MIB's are compiled and are visible if we
> look
> ate the site configuration.
> So how can we set Windows traps on windows nodes then ?
> I'm sure there is a simple solution for this, but I can's see it at the
> moment.
> Any help is very much appreciated.
>
> thanks in advance,
>
> Ren Voortwist
>
>

Similar Messages

Lightroom (ACR 4) color management problems

Lightroom (or ACR 4) has some color management problems. When I develop a DNG into Photoshop (sRGB) everything looks great. Then I proof colors for the web (monitor RGB) the reds become oversaturated. I don't see this problem when I develop the same DNG using Bridge (ACR 3).
Any picture that I develop using LR that looks great in Photoshop, becomes way too red when published on the web.
Whats going on here?

I have confirmed this finding using Photoshop CS3 beta - same problem in converting to the web - too red!

Flash Builder 4 Beta 2 ---- Data Management Problem

Flash Builder 4 Beta 2 ---- Data Management Problem
I have a simple datagrid, a PHP service and a MySQL database. When I run the code I get multiple(7) records returned to the datagrid. Once I enable Data Management and run the exact same code, I only get 1 record returned.
Is there a setting in Data Management that affects the number of records returned?
Here is the MXML code I am testing.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                     xmlns:s="library://ns.adobe.com/flex/spark"
                     xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" xmlns:carasgndataphp="services.carasgndataphp.*">
      <fx:Script>
            <![CDATA[
                  import mx.controls.Alert;
                  import mx.events.FlexEvent;
                  var inptdata:String = "1";
                  protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                        getAsgnDataResult.token = carAsgnDataPHP.getAsgnData(inptdata);
            ]]>
      </fx:Script>
      <fx:Declarations>
            <s:CallResponder id="getAsgnDataResult"/>
            <carasgndataphp:CarAsgnDataPHP id="carAsgnDataPHP" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
            
      </fx:Declarations>
      <mx:DataGrid x="115" y="91" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAsgnDataResult.lastResult}" width="558" height="298">
            <mx:columns>
                  <mx:DataGridColumn headerText="A" dataField="numAsgn"/>
                  <mx:DataGridColumn headerText="T" dataField="numTopic"/>
                  <mx:DataGridColumn headerText="U" dataField="numUnit"/>
                  <mx:DataGridColumn headerText="P" dataField="numProblem"/>
                  <mx:DataGridColumn headerText="TP" dataField="PType"/>
                  <mx:DataGridColumn headerText="P" dataField="numSeqPresent"/>
                  <mx:DataGridColumn headerText="F" dataField="numSeqFeedback"/>
                  <mx:DataGridColumn headerText="D" dataField="numDelay"/>
                  <mx:DataGridColumn headerText="ID" dataField="idAsgnData"/>
                  <mx:DataGridColumn headerText="IDP" dataField="idProblem"/>
            </mx:columns>
      </mx:DataGrid>
</s:Application>

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Power management problems

A couple of weeks ago I installed quite a few of the patches in the recommended list.
Since then, I get the following message repeated continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the power.config file and in the startup scripts, but couldn't find any reference to "DPMSSet." Any ideas on the cause and solution of the message?
I never use the powerd daemon, so killing the process seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Ora Apps Concurrent Manager problem

Here Ora Apps 11i running on a NT server. For some reason Concurrent Manager Service ORAConcMgr terminated and it is
not starting up even if i rebooted the machine. Now unable to get any reports etc. from the system. The error thrown while
starting the service is :
Could not start the ORAConcMgr Service
Error 1058 : The service cannot be started , either be it is disabled or it has no enabled service.
Can anyone tell anything useful about it.
Thanks.

Hi Regarding the concurrent manager problem.
Could you please try to be specific on your error like 1st of all are you able to start the concurrent manager?
If so what is the status?
If not what is the status can you let me know the status so that i work out some thing to solve the problem.
Thanks and Regards
Riyas
email:[email protected]

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Tutorial for solving some media manager problems

Hey gang,
Hopefully me posting this isn't bad forum etiquette, but I recently published a tutorial that details some fixes and "best practices" for properly importing media and getting rid of some pesky media manager errors:
http://library.creativecow.net/lyon_matt/fixing-fcp-assets/1
Full disclosure: I get something like a $0.01 per page view, but I'm not expecting to get rich. I just wanted to spread the word because I know lots of people experience Media Manager problems.
Feedback is definitely welcome!
Matt Lyon
Editor
Toronto

I think it's just a great article and is of more value than 1 cent I just offered by reading the article...
Rienk

Print Color Management Problem ?

I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby) or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

WL60 Management problems

I am new to WebLogic and am charged with understanding how to make it work.
I have figured out a great deal, however there are several problems I keep
running into:
1) When I change a .war file for a configured application, occasionally I
start getting classNotFound exceptions when I try to execute the servlets.
There aren't any new classes, just changes to existing ones. Once I restart
the server all is well.
2) Sometimes when I start my server I get 'Found no context for "GET /
HTTP/1.1". This should not happen unless the default context failed to
deploy'. This happens every time I try to access the server, even through
the console. I am completely hosed and can't do anything.
Any help would be greatly appreciated.
Thanks,
Maury

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

KT4 Ultra APCI power management problems

After I boot I must go into Win98 power management propertys and apply to get any power management functions to work. And then all I can get is monitor blank and hardrive power down. Unit will not go into suspend.
If I use the suspend feature in power down the unit will go into suspend (Susp to ram) but all the fans keep running. When I come out of suspend, the system becomes unstable and quirky.
Can anyone help me get this running the way it should.
Joel Gunn
Kt4 Ultra V 1.0 Bios V 1.4 - AMD 2100 XP
Win98 Se
Nanya 256M - 333 Ram X2
Ati Radeon 7500 AIW
Enemax EG 365P -VE
Two Maxtor 80Gig Ata 133, 7200 on a Promise TX2 Ultra 133 controller.
Aopen Modem
CD rom and CDR/RW

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

SNMP Traps Monitoring problem.

Hi,
Hear is my problem. I am using SNMP Traps as Auto-Reaction Method to monitor some files system. I am already receiving Traps when the file exceeds the thresholds value (when change from Green to Yellow and when change from Yellow to Red). The problem that Im having is that I am not receiving Traps to reset these values (Reset from Red to Yellow and Reset from Yellow to Green). What do I have to do to receive those traps?

Hi Santiago,
I am trying to send snmp alert from solution manager to Tivoli enterprise console. I did all configuration based on SAP document but Tivoli team keep saying that they did not receive anything. There is no way i can test on my side that what is the problem. When aler is generated, i see the MTE goes red and then alert status shows " Action required". However if I change the method to email, i receive emails. it is only SNMP which does not work.
Can you tell if i need to setup special parameter in SNMP method which i am missing. I did the following:
HOST - Tivoli server
Trapsort - UDP
Port - 162
MIB_DIR = /usr/sap//SID/SYS/exe/run/MIBS
Also is there any settings which Tivoli team has to do for receiving traps? It is possible for you to share the setup document? you can send it to me on [email protected]
Thanks for ur help.
Pavan

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Session management problems with SSO

Hi all-
I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
Thanks
Rob

Hi Scott-
Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
Apex version = 3.0.1.00.08
SSO SDK = ssosdk902.zip
I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
Login URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
Home URL: http://apex_host/pls/apex
Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
Logout URL: http://apex_host/pls/apex
RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
create package YOUR_PACKAGE as
procedure process_success(urlc in varchar2);
end YOUR_PACKAGE;
CREATE PACKAGE BODY YOUR_PACKAGE AS
procedure process_success(urlc in varchar2) as
begin
wwv_flow_custom_auth_sso.process_success(
urlc=>urlc,
p_partner_app_name=>'MY_PARTNER_NAME');
end process_success;
END YOUR_PACKAGE;
Anything look obviously wrong to you?
Thanks!
Rob

Font Management Problems - PLEASE HELP

Hey,
We are have six networked computers who are doing ads/layout/pagination for a newspaper. All six computers are new iMacs, all running InDesign CS3. We have a standard set of fonts that I saved on our server. On each iMac, I created a folder on the hard drive called Messenger Fonts. Then I went into FontBook and created a new library called Messenger where I added the fonts. So I thought by doing each the same way, we would not have any font problems but we do –- LOTS of them. Mostly fonts such as Gill Sans, Helvetica, Times, etc. where there is a system version of the font plus a postscript version from our font collection. I have also downloaded Suitcase Fusion (trial) on a couple of computers but I still can't get all of our fonts in sync.
Could someone please help me with a FOOL-PROOF, rock-solid, step-by-step way to set up a small office where there will be NO font conflicts, missing fonts, etc., i.e. "start by deleting these fonts from these particular folders, then blah, blah, blah"
HELP!!!!!!!
Neil

That's a nice short list of fonts that will cover pretty much all minimal needs. The only place you'll see problems is mostly on the web. Many, many sites use standard Microsoft fonts such as Verdana, Trebuchet MS, WingDings and Comic Sans. They'll still display of course, but the page layouts may get thrown way out of whack from the absence of the fonts they're looking for.
I guess as long as no one installs an application, such as Office, that installs it own fonts, we should stay consistent, right?
You should. But even if they do install Office, you can delete every font it puts on the system. Office used to require at least Verdana and Trebuchet MS, but Office 2004 will run without them.
We have a manageable list so I just avoided using FontBook or Suitcase.
My thought there is that a good font manager is still a very good thing to have. You can just put the fonts you want to use in either the /Library/Fonts/ folder, or the Fonts folder in the currently active user account to activate, and remove to deactivate; but you run a bit of risk damaging the fonts by constantly moving or copying them all over the place. With Suitcase or MasterJuggler, you can activate/deactivate them from wherever they reside. Not that manually moving fonts in and out of a Fonts folder doesn't work, it's just much easier to use a font manager.

Issue management problem

Hi all,
I am facing a problem in issue management in transaction solman_issue_mgmt transaction when i try to open a existing message i am getting a dump. the same dump occurs when i try to create a new issue using that transaction.
pls find the details of the dump .
I have applied not 1397754 also but still the problem persist.
kindly guide in this issue.
Error when processing your request
What has happened?
The URL http://ty-stfd0.ty-sap.os.itelligence.de:8002/sap/bc/webdynpro/sap/dswp_ci_issue_management/ was not called due to an error.
Note
The following error text was processed in the system TSD : View usage MAIN_USAGE_1 does not exist in window ISSUE of component DSWP_IM_ISSUE_VIEW
The error occurred on the application server ty-stfd0_TSD_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_EMBEDDED_VUSAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_DEFAULT_VIEW_USAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TSD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ty-stfd0_TSD_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ty-stfd0_TSD_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: SKRISHNAN -l: E -s: TSD -i: ty-stfd0_TSD_02 -w: 0 -d: 20100203 -t: 092939 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regards,
Subhashini.

Hi Rajeev ,
Thanks for the reply.
i have checked the service, the specified service is active and tested also. the main screen apprears, the problem is with the next screen.
there is one more service dswp_im_issue_mgmt , the problem is coming with that service.
In our system, two service are active with the same name(dswp_im_issue_mgmt ) in that one is active and other is not active.
I tried to delete one but i got a message that the service is no more valid. is it because of this am getting the error
kindly clarify.
I tried to run the SIAC_LIST_UNPUBLISHED but it was not there in the system.
st22 details:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDR_RR_EXCEPTION
Date and Time          03.02.2010 08:11:33
What happened?
The exception 'CX_WDR_RR_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLWDR_RUNTIME_REPOSITORY'
has to be
terminated.
|Error analysis
|    An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RR_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
View usage MAIN_USAGE_1 does not exist in window ISSUE of component
DSWP_IM_ISSUE_VIEW

Trap management problem

Similar Messages

Maybe you are looking for