Trapped at transferring data from my old macbook pro to iMac

I got a new iMac yesterday and was trying to transfer data from my old macbook pro to iMac through time machine...
However, I encountered HUGE problems....
Background info: I set up a new account before I transffered my data.
Here is what I did:
I used migration assistance to transfer data. I chose to transfer everything listed on migration assistance from time machine to my new iMac.
After this process was completed, I switched to the transferred account from my newly-set account. Then I realized all the old stuf, (including the software problems + old apps such as microsoft 2008, had been transferred to my new iMac. what I really wanted were all the documents, pictures and music! Therefore I decided to delete this account....
Question 1:
1) I deleted the transferred account, then there was a windown came up asking me if i wanted to keep the home folder, I chose no. then mac started cleaning up and BACKING UP. Since I already had a copy of everything, I stopped the backup process....then this transferred account was deleted. However, everything was still on my mac that I don't have access to (at least I don't know how...) when I checked my mac stroage!
Could anyone tell me how to delete all the files I transferred from time machine to my new iMac?
Question 2:
2) how can i only transfer documents+pictures+music from my old macbook pro to new iMac through time machine without creating a new account? I want all the files to be directly transferred to my newly-set account...
LSS:
Question 1
I tried to transfer everthing from my old macbook pro to new iMac but i realized there were something I didn't want that had been transferred as well. Therefore I deleted this transferred account. However, all the files are still in my mac even if I have deleted that account. Could anyone tell me how I can access to those content and delete them?
Question 2
I just want the documents, music and pictures (from iPhone library) to be directly transferred to the newly-set account on my iMac through time machine (instead to transferred the whole old account to my imac) How can I do it??
THANK YOU FOR YOUR PATIENCE OF GOING THROUGH THIS MESSAGE. I WOULD REALLY APPRECIATE IF YOU COULD GIVE ME A HAND.
btw, you can totally see that i'm not a computer person at all....:( thanks for your help!!

I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'

Similar Messages

Just bought a new macbook w/ mtn lion. transferred data from my old macbook over n it created another user name. that's actually good--xcept for music, which i want on my new acct. How do i move files from my "old comp" acct to my new one?

i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good--I'm not going to be accessing old files frequently--except for music, which i want on my new user name. How do i move files from my "old comp" account to my new one? Is there a way to easily move large #'s of files, or just one by one? I've googled extensively but can only find instructions for OSX 10.6 and previous, which talks about the "Shared folder," which I can't seem to find.

jesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr

I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars

You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html

HT4889 Is there a way to abort a transfer of data from an old MacBook Pro to a new one when you're using Wi-Fi?

Is there a way to abort a transfer of data from an old MacBook to a new MacBook Pro when you're using Wi-Fi?

If you are sure you want to to do it: command + option + esc, then and Force Quit.
ethernet is much faster than wifi.

Help! I transferred the data from my old Macbook pro with some success, but now my new Macbook Air contents think they are the remote disc and that the old Mac Pro is the hard drive. What did I do and how do I fix it?

I transferred the data from my old 2006 MacBook Pro 17". Thanks for the help on that. I thought that I was doing it right. Used a backup hard drive and time machine. Problem: Now my new macbook air thinks it is the old machine and that the remote disc is the mb air. Clicks want to take things to mobile me instead of iCloud, old applications launch instead of the new ones. How do I fix the mess I have made? Like I said before, I am a software user and don't really know what I am doing when I start into the guts of the software, but I am able to learn. Thanks for any help.

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

HT4889 Transferring files from my old Macbook Pro to the new one takes over 30 hours?!?!

How is that even possible? I am trensferring the files using a tunderbolt cable and the wifi on the source computer is switched off to avoid trying to transfer the files over wifi. At first I thought the estimation was inaccurate and hope that when I leave it overnight it will be done by the morning but it wasn't, nor the morning after. I can see there is progress but it is so tremendously slow, it absolutely strains my nerves goven the fact that I have porpietary software on my ild computer that I really nee dto use now, and I am afraid what will happen if I disconnect.
It's been saying "less than a minute left" for almost an hour now but nothing is happening. Can/should I try to restart?

Ah, I see, you are right. My old MacBook is from mid 2010, so it simply has a mini display port, I just assumed it is the same thing since the cable fit and the computers recognized each other.
I wish I knew that before I started, as there wasn't really anything I could do at this point but wait for two days only to get stuck on the last minute. The only "guiding" message was on my new computer advising me to connect via ethernet cable. Ironically it showed the message on my new MacBook Pro, which doesn't even have an ethernet port...

I am having trouble migrating my data from my old macbook pro to my new macbook pro.

It just quits and goes back to the begining after setting up the migration for no reason - can anyone tell me why? This is a brand new machine that I bought today. My old machine is working just fine.

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC

I have all of my data from my old macbook pro in an external hard drive. Basically it's my old Macbook hard drive with external casing. It was working fine before when retrieving files using my new macbook air, now I can't access any files?

I can't access any of my files, photos, anything form my external hard drive... It worked before now when I plug it in the light comes on, but it doesn't even show up as an external drive, so I can't access anything, I'm worried I have lost everything...

Huge mistake was only having ONE copy of your data OFF computer,
most people do it, and its just horrible and the typical reason for serious data loss.
Likely you have a very common failure (extremely common actually) called SATA bridge card failure, which would be "good" news,
read about same here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
Never again let yourself have LESS than 2 copies of your important data off-computer, ever
1. verify the external HD doesnt show up on another Mac
if same, you have about a 8 in 10 chance its SATA card failure.......... easy to fix.
The great news at the end of the tunnel of an apparently failed or failing external hard drive.
When checked on another computer, and with no need for spending money on data extraction expertise or software, the very likely case is that your external USB or thunderbolt HD is in fact fine, and merely the card interface, or SATA bridge card has failed or is failing. Keeping a HD dock around handy, or cheaper still a $20 hard drive enclosure or a SATA to USB connector can be a real life saver in getting your drive back to use, when the drive itself is fine, and merely its interface card has gone bad.
The SATA bridge card inside a USB external HD has a very high failure rate in general
Typical SATA bridge cards as seen inside a 3.5" external HD with power input (#1), and 2.5" SATA cards (#3, #4, #5)
What are the realistic odds your HD is perfectly fine?
There are no hard facts whatsoever, especially since so many people discard their assumed “dead/faulty” hard drives, but a good educated conclusion from years of examining and seeing this issue is that for hard drives made since 2010, and not dropped or generally abused, is that a minimum of 50% conservatively are perfectly fine! I personally estimate however that it likely approaches 60%+.
Considering how many external hard drives ‘fail’ (rather the SATA bridge more than half the time) each day, that is a very high number of perfectly fine HD that are tossed!
This is especially common with 3.5” desktop HD that are connected 24/7 with power and see a lot of data transfer. People wrongly conclude that “X” mfg. just made a defective drive, when in fact their 3.5” drives inside the plastic enclosure is 100% fine. I have personally seen well over 200 of these dead SATA cards and additionally seen 3 fail within a one hour span of doing a large data copies.
One of the very reason pros use bare HD as inserted into HD docks is not just the saving of space and the need for endless USB cables, but the elimination of the need for this high failure-rate part.
While the shapes and sizes vary somewhat on SATA bridge cards, they all serve the same purpose and have likewise failure rates
What exactly is the SATA bridge card in your external HD?
In the middle to late of 2009, most all external hard drives both in 2.5” and 3.5” reached the shelves in SATA III. These small SATA cards or "bridges" are used to translate between the hard drives’ interfaces and the enclosures' external ports (USB, Thunderbolt, Firewire). Additionally these small bridges not only transfer power but also of course the data. Unfortunately these SATA bridge cards have a very high failure rate as they are burdened with shuffle power and data.
Literally these little unreliable and fragile cards are the power conduits and the nervous system for all external HD data transfer.
SATA card as found inside a typical USB external hard drive
The assumption that the hard drive is bad when its not!
Countless 1000s of good external hard drives are thrown away each year because the owner thought the HD was bad when it fact it was the SATA bridge card which had failed. This card is removed in a matter of mere second once an external USB HD is cracked open from its plastic casing to reveal the bare HD and the attached SATA card which attaches between the HD and the USB cable.
To complicate this problem, even many computer professionals do not know that there is a very easy solution to the “failing or dead HD” issue since the hard drive itself is very likely just fine. Its astonishing that so many highly educated computer repair persons are unaware of this high-failure part, but this is mostly due to the fact that they do not juggle 100s of hard drives and know that of the iceberg that is a “external hard drive failure”, the mostly unseen majority are not a HD failure at all, but a bridge card failure.
To add to this great misunderstanding is the fact that people assume that "likewise symptoms seen on an external HD are the same as seen on an internal HD, therefore also the external HD must be bad". This is a compositional fallacy of logic. Since internal HD do not have a SATA bridge interface, to conclude similar symptoms "indicate the same failure" is misplaced and incorrect.
This is all not to say that HD do not fail, they do indeed, and I have seen many 100s of dead and failing hard drives. Hard drives even under ideal conditions have a life expectancy of around 4-8 years due to ferromagnetic depolarization from entropy. But of the mountain of symptoms that are seen as “hard drive failures” in comments, posts, and hearsay, half or more of these are not a HD failure at all.
Once your rescued hard drive is removed from the bad SATA card
You have several options, but the purchase of a $20 HD enclosure is one option, another is having a HD dock, however this eliminates the former portability in a 2.5" small HD.
Remember that 3.5” HD require power, which means you need either a HD dock, or a powered SATA card kit as seen at top left in the picture below. 2.5” HD get power from the USB port itself.
Just remember that the serious downside to the low cost external HD enclosures is THEY TOO contain these SATA cards, and what is worse the cheap ones will fail, often, much quicker than the original factory one did! In which case it is recommended you buy a quality HD USB enclosure
Rescue tools to use with your extracted HD for data recovery

How to migrate from my old MacBook Pro to a new one with less disk space and an external hard drive?

I have just bought a new MacBook Pro and an external hard drive.
Yet I have problems migrating data from my old MacBook Pro (more internal disk space with around 500 GB data) to my new one (internal disk space less than 500 GB).
I have connected all 3 devices but it seems the Migration Assistant does not have an option for us to select to migrate to an external hard drive.
Any other way to do it?
Kindly help me. Thanks.

For your situation, Target disk mode may be the most efficient method:
http://support.apple.com/kb/ht1661
Ciao.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.

William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

How do i transfer data from my old macbook to a new macbook pro?

how do i transfer data from my old macbook to a new macbook pro?
i have an ether net cable will this help?

I've used Migration Assistant in the past and it's working like a champ. You either want to connect your MBPs using a Firewire cable or have them connected to the same router with Ethernet cabling. Don't attempt a wifi transfer - it could take a whole day.
Both links provided are good - they both point to various ways to transfer data. I just prefer MA.
Clinton

I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs.

How do I transfer data from an old MacBook to a new MacBook air?

How do I transfer data from an old MacBook to a new MacBook air?

Everything you need to know, right here. Make sure you read through it BEFORE you turn on the new Mac for the first time. This is because the preferred means is using Setup Assistant, which is only available form the first boot.
http://pondini.org/OSX/Setup.html

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Trapped at transferring data from my old macbook pro to iMac

Similar Messages

Maybe you are looking for