Trasfer posting w.r.t material document

Dear All,
Can we do transfer posting w.r.t MIGO (GR-101) using t.code MIGO_TR or MB1B. i try do do TP but system is not allowing
1) with T.code MIGO_TR system is giving msg:
Selected material document does not correspond with action to be executed
Message no. MIGO067
Diagnosis
You want to post a goods receipt, goods issue, or transfer posting with a material document as a reference. The document entered does not correspond with the prerequisites in order to be used as a reference using this functionality.
System Response
The prerequisite of this functionality is that there is a material document without a reference, in other words, the document posted at the time must have been an 'Other' goods receipt/goods issue or an 'Other' transfer posting, according to the selection.
If, for example, you want to post a goods receipt, you cannot use a transfer posting document as a reference.
Procedure
Choose a document suitable for the selected activity.
2) MB1B i selected w.r.t material doc:
Process doc. 5000011861, trans./ev. type WE, with different transaction
Message no. M7065
Diagnosis
The function is not defined for the transaction/event type of this document.
Example: you want to enter a goods issue with reference to a material document but have entered a goods receipt document as reference.
Procedure
Enter a different document or process the document with the function that has been defined for it.
Do you want to display the list of material documents for the material? If so, you can select by transaction/event type.
Please advice me how to proceed,
Regards,
Gopala.S

Can we do transfer posting w.r.t MIGO (GR-101) using t.code MIGO_TR or MB1B. i try do do TP but system is not allowing
Not possible,try with T.P mvmt types like 301,309,311,351 etc.,

Similar Messages

USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,

Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem

IDOC message type WMMBXY not including Serial numbers in GR material documents when created with reference to an Inbound delivery

Hello,
We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement material document (and stored in SER03).
Currently segment E1MBXYJ is maintained with the inbound delivery number in field VLIEF_AVIS and Inbound delivery item number in field
VBELP_AVIS. In segment E1MBXYI, no purchase order is assigned and the fields EBELN and EBELP are blank. The movement indicator (KZBEW) has the value 'B'.
Even after making the above settings, the serial number(s) maintained on the Inbound delivery item do not get saved to the material document.I did look at OSS note 833603 (Solution for 2 - GR for Inbound delivery) and we have followed the same settings. This works when there is no serial number in the Inbound delivery. However if we have serial numbers, the IDOC posts successfully, however the material documents in MB03 do not have any serial numbers copied over from the Inbound delivery where the serial numbers are definitely assigned.
Any help you can provide is greatly appreciated!
Thanks,
Ashvin
P.S
If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. This is what we want to accomplish via the above IDoc process.

Hi
Try with enhancement MWMIDO08. See note 833603 - EDI: Goods receipt for stock transport order for further information.
I hope this helps you
Regards
Eduardo

Not able to see the material documents against the status of GMPS

Hi,
Although the PM order has the status of GMPS(Goods Movement Posted) in IW33.No material document is seen against the Order under the order type :Preventive Maintenance.

Sumit Mohan,
Maybe someone changed the configuration (see above).
Let us know the results so we can exclude it from our investigations...
PeteA

Expand items on a material document

The system allows to post 100 items per material document and after that it create a new document. How can we have the system to allow more than 100 items per material document? Is there any configuration/developement?

Dear,
When a material document is posted, a corresponding FI document is generated. The number of the the FI document items can exceed the number of the material document taken as a basis in some cases by more than the double (for example, with an active material ledger). When the system tries to write more than 999 FI document items, a termination occurs.In order to prevent this, the number of the material document items is restricted to 100.
In the exact specification of a statistic, 100 items were proven to be favorable in performance measurements.
The number of the maximum items per document should be a customizable statistic.
For details read OSS Note 172678.
Hope clear to you.
Regards,
R.Brahmankar

BAPI_GOODSMVT_CREATE - Error while posting a Material Document

Hi Experts,
We are trying to do the material document posting using the transaction "MB1C" manually in SAP. The movement type which we are using for the same is "261". While doing this is, it is asking for a work order number and the Recipient number. We gave the Recipient Number as "123". Material document is created successfully.
Again using the same transaction "MB1C" , we are trying to do the reversal of the material document which we posted previously against another work order number for the same material and the serial number if the material is serialised and as well as for the non serialised material.
Both this case, in SAP the material document is created succesfully. This is done manually in SAP.
When we are trying to create the material document using the BAPI 'BAPI_GOODSMVT_CREATE', for the above scenario, posting the material document '261' movement type for one work order and the reversal for another work order '262' movement type for the same material (whether it is a serialised or non serialised) we are getting the eror as "RE Qty. transferred exceeded 1 PC: 50,003,695 C001 USED 1200".
We are passing the following at the item level. MATERIAL Number, Plant, STGE_LOC, ENTRY_QNT, MOVE_TYPE, BATCH, ORDERID, RESERV_NO, RES_ITEM, ACTIVITY, XSTOB for reversal.
We are passing the GM_CODE as '05'.
Please let us know what needs to be changed inorder to create the material document properly without getting errors.
Thanks in Advance,
Mohan.

Hi,
We fixed this issue by removing the reservation number of the material when we are trying to post the material document with the movement type "262".
The reason for removing the reservation number for the movement type "262"
The reservation number is getting created against a work order when we trying to create the work order in IW32. This reservation number is used for validating the stock while we are trying to consume and doing the reversal.
SAP is allowing us to reverse the consumed quantities only based on the reservartion number and hence we got this error.
To fix this error, if we are trying to reverse a particular material against a different work order for which it has been consumed previiously, remove the reservation number and item number and try posting the material document.
Hope this solution will solve your issue:)
Thanks and Regards,
Mohan.

Multiple Posting change notice created for one material document

Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
Jeetendra

Thanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN.

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

Delivery number for a material document posted

Hi experts,
I need to delivery number for the material document number posted,
I tried to use the field XBLNR from the table MKPF
but i see that the feild is empty in the case of inbound delivery
why is it so.
How ever i can get the data from VBFA ,but can any one tell me the reason why XBLNR is empty in case of inbound delivery.
Thanks a lot in Advance.

Hi,
If you do GR w.r.t. Inbound Delivery No in MIGO then it will not update "Reference" field i.e. XBLNR.
To update same with Inbound Delivery No, you have to do "Post Goods Receipt" from Inbound Delivery Document itself in VL31N or VL32N.

A material document was posted to a Profit Center that didn't exist yet

Material document 4900876825 posted to profit center
P102925892 on 1/26/07. According to the master data record it wasn't created
until 1/31/07. This caused an FDM issue.
How is this possible?
There is an include program in FI_DOCUMENT_PROJECT which calls the function module Z_GET_PDC_PLANT. Apparently, this function module does not contain any logic for checking if whether the "formulated" profit center is valid or not (or the FM did not use function KE_PROFIT_CENTER_CHECK to validate profit center).

Good luck, Apple tends to treat suggestions as their own property, though

Excise duty for some line item of material document is not posted

Dear CIN Exerts,
In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
Now the problem is that we wants to post excise Duty for those material WRT material document for whom it was not posted.
Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted) in MIGO > Document Display> Excise items tab .
Regards,
Ashutosh

Excise posting is not recommended by sap for movements 103 or 105.
Refer or search for SAP notes with subject CIN Limited functionalities.

Migo for subcontracting po- Excise invoice is posted later to material docu

Dear all,
While we are doing migo for sub-contracting PO we are getting an error like this Excise invoice is posted later to material document.
process
1. Create subcontracting PO.
2. Issue material 541 MVT.
3. Create sub-contracting challan- dated 8-8-2010.
4. Migo date 8-8-2010.
while entering subcontracting challan no & year, error messege is coming as Excise invoice is posted later to material document.
Pls give solution.
Thnaks & regards
madhu

Hi,
You will have to post the MIGO at least one day after the creation of Excise Challan.
Regards,
Prashant Kolhatkar

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How can we find the Idoc number which posts the material document in SAP

Hi All,
How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
Thanks
Chandru

Hi,
In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
regards
suresh

BAPI_GOODSMVT_CREATE Material Document Posting against Process Order

Dear Experts,
                    I want to post more than one documents from BAPI "BAPI_GOODSMVT_CREATE". It is working fine for GR(gmcode = 02) 101 Mvt. type. But the problem is that when there is a GI (gmcode = 03), serial numbers document comes; it display an error as " Content of order 1000400: 40000134 transferred to interface (IMSEG)".
My Question is that: Is this a correct BAPI for serial numbers assigned materials, OR I should use another bapi for these serial number materials.
Will you please let me know the name of the BAPI which I should use in this regards.
***** I am using BAPI_GOODSMVT_CREATE as follows for Process Orders:::::
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header               = gmhead
        goodsmvt_code                 = gmcode
*   TESTRUN                       = ' '
*   GOODSMVT_REF_EWM              =
* IMPORTING
*   GOODSMVT_HEADRET              =
*   MATERIALDOCUMENT              =
*   MATDOCUMENTYEAR               =
      TABLES
        goodsmvt_item                 = fitab "bapi_itab
        goodsmvt_serialnumber         = itab_serials
        return                        = errmsg
*   GOODSMVT_SERV_PART_DATA       =
*   EXTENSIONIN                   =
Thanks,
Sohail

The function is intended to create a single document , Here is an excerpt from the FM documentation :
Functionality
You can use this method to create a material document for a goods movement.
You can only create one material document each time you call up the method.
You can use a simulation function before posting the goods movement to check how the data is updated in the database. The standard system is configured so that the goods movement is posted immediately, without prior simulation.

Trasfer posting w.r.t material document

Similar Messages

Maybe you are looking for