Trash folder in Iphoto is not holding the pictures.

When I move photos to the trash folder in Iphoto, they completely dissappear without me emptying the trash, they are not in the system trash either. Why is this happening? Why is this happening? I want to be able to check them again before they are gone. How do I fix this?

This might also help you:
Deleting Photos from an iPhoto Library:
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurances of that photo in the library.
OT

Similar Messages

I deleted some video's from iPhoto then from the trash can on iPhoto and then from the trash can on my desktop but the space has not freed up on my hard drive

I deleted some video's from iPhoto then from the trash can on iPhoto and then from the trash can on my desktop but the space has not freed up on my hard drive

Check out the following to see where your space is:
Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper
FreeSpace
SpaceControl
FreeSpace

IPhoto will not open with pictures when I click on the icon. It does show that it is open on top toolbar. What happened to my photos?

iPhoto will not open with pictures when I click on the icon. It does show that it is open on top toolbar. What happened to my photos?

Did you run any updaters recently, i.e. like just before this happened? Try this first fix: make a duplicate copy of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file,, Cache.dbt, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences..
OT

Not all the pictures in iPhoto album show on iPhone photo

In one album in Iphoto not all the pictures show on Iphone photo album?

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

IPhoto can not find the original photo, does iPhoto copy the photo or just make a thumbnail?

Hi,
I'm scanning and putting all of my (paper) photos into my computer and then into iPhoto, tagging them, and doing all the time consuming things necessary to build a good library.
I've tried to open a few of the events and look at the photos I put in but I get an error that iPhoto can not find the original photo. When I put a photo into iPhoto does the program only make a thumbnail copy with a link to the original, or does it actually copy the photo into the library? I'm thinking the former. Because I have a Time Machine backup, a hard copy, and (presumably) a copy in iPhoto, I have been deleting the photos AFTER putting them into iPhoto. Do I need to keep the photos I put in iPhoto on my computer? Will I need to go into TM and restore them? Will I loose the information like Faces, Places, Keywords, if I do?
Thank you much,
I'm working with 9.1.2

I have exactly the same problem except my photo is named "L1000093.jpg" and it's been there for a year now, but suddenly, when I wanted to view it in it's album, ("Favorite" which has been there for a year too), it says "The photo P1010311.jpg cannot be found"!!! What the heck is going on? So I canceled, went back to the album, clicked on L1000093, clicked "show event", went over to Event, clicked "reveal in finder" and there it is, iPhoto Library/Master/blah blah blah... L1000093.jpg!
Where the hack did that P1010311.jpg came from? Sure I have that photo, but it's in a completely different event and a different album! What's is iPhoto 11 / Lion / iTunes 10.5.3(3) up to?
So I threw L1000093jpg into the trash, went into Lightroom, find the original, re-export it, load it again into iPhoto, added it again to the album (favorite), and guess what? I just did all those and the same "The bloody photo cannot be found" message popped up and when I go to finder, there it is.
This is a bug. It's been a bug since 2006 as far as I can remember. And Apple had never done a complete fix. It's an if thing!
And the most frustrating part: Althought they call this an Apple forum and you have to sign in to participate, I have never seen one Apple software guy here saying "this is what to do", just us victims helping each other and many non-Apple folks guessing to the best of their ability to comfort us.
Oh, toys are toys. I sometimes wonder if Steve had fought so hard yet the cancer in Apple actually won!

Why is my calendar not holding the correct color. I have reset the color of a particular calendar posting and within second the color reverts to purple.

Why is my calendar not holding the set color. I have reset the color of a particular calendar and within seconds it reverts back to purple. I am using ICloud on a calander linked to my IPhone and IPad.

set them at icloud.com on a computer. its a work around. Peace, Clyde

IPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <

How to hold the values as it's not holding the values when it cross 255

DATA : fval1 TYPE edidd-sdata.
DATA : fval2 TYPE edidd-sdata.
DATA : fval3 TYPE edidd-sdata.
DATA : fval4 TYPE edidd-sdata.
DATA : fval5 TYPE edidd-sdata.
DATA : len(3) TYPE n.
values1 = wa_final-low.
values2 = wa_final-high.
IF wa_final-high IS NOT INITIAL.
    CONCATENATE values1 values2 INTO fval1 SEPARATED BY '-'.
ELSE.
    fval2 = values1.
ENDIF.
IF fval3 IS NOT INITIAL.
    IF fval1 IS NOT INITIAL.
      fval = fval1.
      CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
    ENDIF.
    IF fval2 IS NOT INITIAL.
      fval = fval2.
      CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
    ENDIF.
ELSE.
    IF fval1 IS NOT INITIAL.
      fval3 = fval1.
    ENDIF.
    IF fval2 IS NOT INITIAL.
      fval3 = fval2.
    ENDIF.
ENDIF.
DATA : len(3) TYPE n.
len = STRLEN( fval3 ).
IF len > 250.
    fval4 = fval3+0(250).
    fval3 = fval3+250(5).
*    CONCATENATE fval4 fval3 INTO fval5.
ENDIF.
       IF fval4 IS INITIAL.
          wa_final1-varbl31 = fval3.
        ELSE.
            CONCATENATE fval4 fval3 INTO fval5.
            wa_final1-varbl31 = fval5.
        ENDIF.
        MODIFY it_final1 FROM wa_final1
        TRANSPORTING varbl31 WHERE agr_name = wa_final-agr_name.
at this point also it's not holding the values when it exseds 255
kindly please help

H friends ,
i am not the expert at the same time i know some thing in abap
fval4 = fval3+0(250).
    fval3 = fval3+250(5).
in the above case fval3 have 255 char at that time iam transporting 250 char to fval4 with this statment
fval4 = fval3+0(250).
and iam keeping the remaining 5 char in fval3 with this statment
fval3 = fval3+250(5)
so that i can push some more values in fval3 and at i am
CONCATENATE fval4 fval3 INTO fval5.
so that fval5 may get all values this is the way i try but fval5 is not holding all the values
i asked solution for that
fval 3 = fval3+250(250)
dosen't have any meaning i know that friend
my question is how to hold the remaining value

Is there a save option on iPhoto? Sometimes iPhoto does not retain the name on a face I've added to a photo.

Sometimes iPhoto does not retain the name on a face I've added to a photo. I have 'added a face' then flipped to the next picture then back to that picture and the label has disappeared.

No. It's supposed to be automatic. You might try repairing the library's database and then see if it still crops up now and then. If that doesn't help try rebuilding it the same way.
Launch iPhoto with the Option+Command keys held down and select the database repair option in the rebild window:
Then the rebuild option if necessary.
OT

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

IPhoto is not allowing the edited versions to be exported.

Apparently, there is a long-standing issue with iPhoto not keeping the edits once photos are exported. I usually don't test my exports to see if the edited version was exported correctly. I just assume Apple products are working as they should. But I tested today and discovered what so many of you have discovered - iPhoto is not allowing the edited versions to be exported. I can't see that Apple has addressed this. What is going on here? Side Note: I am also frustrated that Apple took iDVD out of their line-up of available preloaded software. Getting more disappointed with Apple all the time.
Has someone figured out how to easily get around this obvious flaw?
Could it have something to do with the preference of importing the photos into the iPhoto Library. Should I uncheck this in the preferences menu? I really only want to use iPhoto for quick renaming of files and simple editing purposes and then export them to my own method of organizing and back-up. I use Photoshop for more extensive editing. Would really like to continue using a simple method, but so far, this simple method is more work than is necessary for Apple's software. Come on guys!!!!!

1 - there is NO " long-standing issue with iPhoto not keeping the edits once photos are exported." If you are doing things correctly it is trivial to export edited versions (or originals if you prefer)
2 - it is strongly recommended that you do not uncheck the preference to copy imported items to the iPhoto library - unchecking this preference makes operation much more difficult and makes upgrading hardware or moving to a new system almost impossible
3 - you are doing something wrong - since you do not tell us what you are doing - or even what version of iPhoto you have - it is impossible to u hfigure out what you are doing wrong
exactly how are you exporting photos? Exactly how are you using PhotoShop for editing?
The proper way to eidt using PS is to set PS as the external editor, edit in PS and save (not save as) to return the edited version correctly to iPhoto? The best way to export is to select the photo(s) in iPhoto and export (file menu ==> export) - the default is you get the current (edited) version
LN

HT1414 After installing ios 7, my ipad 2 is taking a long time to charge, like 8 hours and not holding the charge. Help

After installing IOS7 on my IPad2, it takes a very long time to charge and does not hold the charge. Should I uninstall IOS7, how do you do that? HELP!!

Do you have the cover on your ipad? If so you may need to go into settings>General and turn on lock/ unlock so that it goes into standby when cover is closed. Not sure this is your problem but it was why my battery didn't last long. As far as long charge time goes I have noticed it is taking longer to charge also. Hope they fix some of these bugs in the first update.

The battery in my ipad2 is not holding the charge. What can i do?

WHAT SHOULD I DO? WITH MY IPAD2 THE BATTERY IS NOT HOLDING THE CHARGING.
IT STARTED LIKE 10 DAYS AGO AND ITS GETTING WORST AVERY DAY, I CHARGED IT FOR 8 HOURS AND DURING THE NITE THE CHARGE DISSAPPEARS IN AIRPLANE MODE, PLEASE ADVICE ME WHAT TO DO?

WHAT SHOULD I DO? WITH MY IPAD2 THE BATTERY IS NOT HOLDING THE CHARGING.
IT STARTED LIKE 10 DAYS AGO AND ITS GETTING WORST AVERY DAY, I CHARGED IT FOR 8 HOURS AND DURING THE NITE THE CHARGE DISSAPPEARS IN AIRPLANE MODE, PLEASE ADVICE ME WHAT TO DO?

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

Trash folder in Iphoto is not holding the pictures.

Similar Messages

Maybe you are looking for