Trash in BSP-Pages for ABAP-reports

Hi,
it´s strange that I´m getting trash in the BSP-Pages that represent an ABAP report. I just can´t identify how it is produced and shows up between Titel and real list. I use
          SUBMIT (progr_name)
             WITH SELECTION-TABLE sel_table
             EXPORTING LIST TO MEMORY AND RETURN.
and then CALL FUNCTION 'LIST_FROM_MEMORY'
later    CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
I make a loop with the output and save all in a variable of type string, which is later used in the layout page.
After execution, I get something like:
     Title       page Nr.      User name
     trash
     more trash
     even more trash
     list
the data that I describe as trash is information from the list, but it also appears where it must.
Has anyone experience with it ?? Thanks

I am also getting some "trash" at the beginning of my report in some cases. The report list I am sending the FM contains Material Descriptions and our descriptions (can) contain a combination of slashes (/), colons ( and commas (,) (eg. SPARES:DISPLAY/GASKET,MONO,GEMINI) - I find that if I remove the commas from the descriptions during the reporting, that I do not have this problem. However this is not a viable solution. Any ideas would be very helpful.

Similar Messages

  • How do i create 2 parameter pages for 1 report?

    Hi,
    I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
    my difficulty is how do i create 2 parameter page for 1 report?
    thank you

    my question
    1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
    2- how can create manual process to fetch row into specific items in page ( i tray these code
    SELECT col1, col2, col3 ....
    INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
    FROM table
    WHERE id = :P_id ) but no data retrieve .
    I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
    ORA-01403: no data found : Unable to fetch row multiple automated row fetch
    On your second question, the manual process should work provided:
    P_ID has a value when the process executes. You can do it this way:
    i. Make this process as a on-load After/Before header process
    ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

  • Calling a BSP page from ABAP programme

    Dear Friends...
            I am cslling a BSP... from an ABAP program... for that I have used this class and also a function module to ckeck.. actually from the abap program it invoks the BSP page very nicely and as my logic for invoking the BSP is a part of the Business Object and it is associated with the Enterprise portal so... when i reach the ep and trigger that business object to instantiate the BSP page from my calling logic of abap... it goes to the ITS and port 80 or something and didnt produce the BSP.. and only the blank screen was there...kindly help me how i am supposed to instantiate the BSP from properly from ABAP by interfacing the EP... my code is given below...
    data :
        lv_url type string.
      concatenate
        'http://sapdevbp.sbic.co.za:8041/sap(bD1lbiZjPTIwMA==)'
        '/bc/bsp/sap/z_updatemng/bp.htm?bpid=' object-key-businesspartnerid
        into lv_url.
    call method cl_gui_frontend_services=>execute
      exporting
        document = lv_url
      exceptions
        others   = 1.
    please help....
    me...
    regards
    Naim

    Instead of hard coding the URL try to get the URL of the BSP application with the below code
    CALL METHOD cl_http_ext_webapp=>create_url_for_bsp_application
    EXPORTING
    bsp_application = '<BSP application name'
    bsp_start_page = <start page e.g default.htm>
    bsp_start_parameters = params " any parameter you want to pass along with url
    IMPORTING
    local_url = url.
    Then try out passing the URL to the execute function

  • Using a BSP page to hide report url ?!

    Hello everybody,
    I would like to 'hide' exact query url.
    I have found in SICF transaction external aliases but I can replace only a part of my url, ie :
    http://host:port/sap/bw/bex?parameters => http://host:port/test?parameters
    I would like to replace all the url in :
    http://host:port/sap/bw/bex?parameters  => http://serveuralias/
    This url has to be the same for each BW reports ... (little bit stupid i think but ...)
    How can i do this ?
    We told me that we can parameter a BSP page in SICF, on bex service, which call bw reports and thus we should only see the bsp url in IExplorer and not BW report url. Is it possible ?
    Thanks a lot,
    CG.

    hi tom,
    can u tell which method u r using for URL parameter passing?
    regards,
    kamaljeet

  • Options for ABAP report output in Dashboard type presentation

    Background
    Monash University environment is SAP ERP ECC6 - no BW. The University has undertaken considerable analysis of spend as part of developing a strategic approach to procurement. The data used to undertake this analysis was extracted from SAP MM and FI using a developed ABAP report which collates, categorizes and consolidates all spend information from MM (for our Purchase Order based commitment and expenditure) and FI (for direct invoices and Corporate Credit Card expenditure). This information is then currently exported to MS-Excel to produce a report containing graphs, pie charts etc.
    Requirement
    To present output from our Spend Analysis Report in a more readable dashboard type presentation. This facility should allow easy manipulation (slice and dice) and drill down of the data.. Our requirement is to have something operating within a very short time-frame, say within a month or two. Although you might suggest Web Dynpro Business Graphic or SEM /BW (as the optimal solution) we understand the set up time for either of these solutions is prohibitive. Visual Composer has been suggested as another option but we have no in-house expertise to determine if this is a viable solution.
    Some colleagues visited a conference a couple of weeks ago and saw a demonstration of a product call XenoCube http://www.inlogik.com/downloads/XenoCube_Brochure.pdf
    which was proposed as a quick way to present SAP 'raw' report output in a more readable form. Other solutions in this space that have been suggested include:-
    Zycus - Actionable Spend Analysis – Zycus.com
    Emptoris Spend Analysis - emptoris.com
    ONIQUA Enterprise Analytics– oniqua.com.au
    Ariba Buyer – ariba.com
    SAS Spend Analysis – sas.com
    Etesius – SpendGuardian etesius.com
    Can anyone provide advice as to their experience of SAP solution, integrated partner products or any of the about products to satisfy a similar requirement to that which I have outlined? The main selection criteria will include a product which is:
    a) quick & easy to implement,
    b) presentation and manipulation of ABAP extracted data
    c) is scalable and
    d) is reasonably priced.
    Grateful for any advice regarding a solution .
    Thank-you

    Hi,
      This development writes to mapped network drive in Unix. The concept will be similar.
    [http://wiki.sdn.sap.com/wiki/display/SCM/APOtoMappedNetworkDrive]
    cheers
    Aveek

  • FUNCTIONAL SPEC FOR ABAP REPORT DEVELOPMENT

    Hi There,
    Can someone please help with a sample of Funtional specs for ABAP Z report development that i could give ABAPer.
    You can scrub the report for names cof company and other personal info, i just want to see what is essential and what is not essential and the presentation.
    Please you can send to my email [email protected]
    Thanks

    Hi,
    Functional Specification  is written by the functional consultants to give to the ABAPers where there will write technical specifications to meet the requirement.
    Regarding your issue, u have to first know
    whats the requirement is
    when to start with either T.Code and
    at what field
    who are authorized to do that
    How we do that
    How this integrated with other modules
    what implications it is going to reflect in other modules
    the approval from the repective supervisors
    and finally viewing the output
    and rectifying the same after going through the technical requirements.
    Mohan
    Award pointsif it helps.

  • BW solution for ABAP Reports

    Hi All,
    I have a client which implemented SAP R/3 and they have certain standard reports like MB5B, VA05 and certain zreports. Now my task is to propose a BW solution for that client. What will be the steps that needs to be done to accomplish this task. help in this regards will be appreciated and awarded.
    Thanks all.

    Hi Pratibha,
    If there are too many reports that need to be reproduced in BW then you can club similar reports or belonging to a particular module. And then built datasources for them.
    If there very few reports,
    1. Find out the program behind the ABAP reports
    2. Build a zprogram for the output and put into an FM.
    3. Create a direct update DSO in BW on the FM
    Let me know if it helps or not.
    -Bikas

  • Background processing for ABAP report with selection screen

    Hi ABAP Gurus,
    I m facing a strange problem in scheduling a background job for my report with a selection screen. I have a variant for the report.
    I scheduled a job, but it seems to be not doing anything though all the system resources are available. The job overview shows "Acive" for the job. The job is neither stopping anything, it is just sitting there In SM50, the status shows "On Hold".
    Any ideas/comments on the problem and how this can be overcome?
    Qucik replies and solutions will be highly appreciated as this is a crucial part for a go-live project.
    Thanks in advance.
    Shivani.

    Yes. My report has a selection-screen which requires user input. But I have created  a variant for the report and trying to run it in background using this variant. But facing this problem.
    Strange thing is, instead of the usual SM36/SM37 option where we schedule and monitor background jobs, this option does not work for my report.
    But I tried through SE38, and from my selection screen I selected "Schedule background job" and "run immediately" option, and this works. Though I still use SM37 to monitor this background job.
    I have never faced such a situation before.
    Any hints/tips why this happens and how this can be overcome in the future?
    Thanks in advance.
    Shivani.

  • Create transaction code for abap report

    Hello,
    don't know if this is the correct subforum (sorry in advance).
    I have created a ABAP Report in SE38 having a SELECTION-SCREEN.
    Now I would like to have a Transaction code to refer to the report. So that I can call the Transaction and then get the selection screen to use the abap report.
    How can I do this the simplest way? I can't find anything in google, can you give me some hints?

    hi
    goto se93
    give transaction code and click create
    select the second radio button(transaction code for reports)
    give short description and press enter
    after that give your program name
    and select the gui check boxes as required for html ,java,
    and save it
    you can use the transaction code
    REGARDS
    PRASANTH

  • Hi Can any one help in creating a New Change history log for ABAP Report

    SE38, put your cursor on an empty line within the source code editor, and click the pattern button. In the dialog, select the radiobutton for “Pattern” and enter the name of the pattern and click the green check. The wizard will then be triggered. Using the ABAP Report Wizard This first screen of the wizard is simply for information purposes.
    How to create that log. How to Enter our user defined into SAP. I mean how to create and get our own one in other patterns F4 help

    Hi Mohan
    To create a custom patter please go through the following Menu option in SE38,
    Utilities --> More Utilities --> Edit Pattern --> Create/Change/Delete/Display Pattern.
    Hope this helps !
    Regards
    Ranganath
    PS : Reward points for all useful answers !

  • Saved Lists for ABAP Reports

    Can the functionality of saved lists for query be extended to any ABAP report. I am able to extend the functionality to classical abap reports but I am unable to do the same for Interactive reports. Any inputs on this ?
    Ankur Bhandari

    Hi Pratibha,
    If there are too many reports that need to be reproduced in BW then you can club similar reports or belonging to a particular module. And then built datasources for them.
    If there very few reports,
    1. Find out the program behind the ABAP reports
    2. Build a zprogram for the output and put into an FM.
    3. Create a direct update DSO in BW on the FM
    Let me know if it helps or not.
    -Bikas

  • XLS macro for abap report

    Hi,
    Is it possible to create a special xls template for the ABAP report in sap. Uh, our key users want to have stock report in xls, which should have the company template form and colored columns…
    Do you have any experience with that?
    Br
    saso

    no response

  • BSP page for Search Function in  Solution Database

    Hi
    I would like to know if there is an BSP available for the Search Function in Soltution Database. If yes then i would like to know what is the name of the BSP.
    <removed_by_moderator>
    Thanks
    Tenielle

    Dear friend,
    Have you done all the customizing via spro->scenario specific->service desk->solution database.
    There is a note SAP note 951145
    also you have to build the index..check via SAF tool...all the doc is there in IMG.
    Secondly...there is also a troubleshooting option.....
    This will help u....
    Pls assign pts

  • BSP Page for Common Access

    Dear Expert,
    I need a help,
    I have a unique development system.
    We are trying to create a web page that can be accessed by web user,
    and they can post a question also.
    Once the question is submitted, CRM will create a new service request.
    We are about to create a web page using BSP Page in our website.
    We have an idea, that we might create an user account that'll be used to sign-in to our CRM backend,
    to create a service request.
    Is it possible to do so? since we have might meet boundaries in sign-in to our CRM application.
    Please expert,
    I'm very indeed of your guidance.
    BR,
    Robin

    Using SICF and create a communication ID and set it in the settings

  • Printing Blank pages for SSRS Reports in Firefox browser

    I have created an SSRS Report that works well on chrome, but when I use the site in Firefox the SSRS Page prints blank pages though the report displays properly. I have tried every thing like reducing table width. I am using the report viewer control.
    Sanjeev Menon

    Hi Sanjeev,
    Generally, if the report display properly in the browser, it should be also work well when we print the report. And I can’t reproduce the scenario in my own environment. As to this issue, I recommend that you can try to run it in compatibility mode or use
    IE explorer to print the report.
    If this issue still exists, please try to update the report viewer control to latest release and check this issue again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for