Trash/Junk prefs (server vs local)

In setting up my mail accounts I've noticed that (Apple) Mail frequently creates new foders for my various IMAP accounts called Sent Messages, Sent Items, Junk, Deleted Items, Trash etc. either in my iCloud Folder or On My Mac Folder. I know I can set up my preferences in the accounts to do this but I'm not sure how.It's a bit vague and I've looked elsewhere for direction but nothing is very clear out there.
For instance what is the difference (if any) between expunged, trashed and deleted?
When I delete mail on my mac, I want it moved to the Trash folder so that I don't see that mail in any other device (iPhone, iPad, laptop). I don't particularly care whether I can see the deleted mail in the Trash folder of any other device. When I trash mail, I'm happy never to see it again.
I get the impression that deleted mail stays on the server for some time after it's been deleted from my computer. It's flagged as expunged and a copy is made (why?) and the original is deleted while the copy is moved top a pending deletion file.!!?
Anyone?
Cheers,
SNaP

You need to tell Mail how to use those IMAP folders. Select each one and then choose what it is used for from the Mailbox>Use this Mailbox for submenu (eg Sent, Trash, etc). That will incorporate that particular IMAP mailbox into the grouped mailboxes of the same purpose.
I don't know anything about the inner workings of IMAP, so I can't explain what it is doing.
Note that if it is a Gmail account, Gmail creates an All Mail folder and everything goes into it, deleted or not.
You can change it in the GMail settings on their web portal so that it doesn't keep deleted messages and to not show the All Mail folder on IMAP clients.

Similar Messages

My inbox shows that I have 69 emails, but the pane to the right is completely blank. Other folders will show mail (trash, junk)

My inbox shows that I have 69 emails, but the pane to the right is completely blank. Other folders will show mail (trash, junk). It was working fine but I don't know what happened to emails. I know they are there, and I know the server is sending correctly (comcast)

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

Message 'server.storage.local'.

When the Imac startup, I get the message "There was a problem with the connection to the server 'server.storage.local'." but everything works.

There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
Step 1
If you get the warning as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
Clear Recent Servers…
and confirm. Test.
Step 4
Open the Print & Scan pane in System Preferences and delete any network devices you no longer use.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
Try rebuilding the iPhoto library.
Step 8
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and /Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 9
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Remote Desktop "Bypass RD gateway server for local addresses" no longer working in Windows 8

Hi,
After installing windows 8, it seems like the "Bypass RD gateway server for local addresses" is no longer working.
In Windows 7, when the option is checked, I could have the server name set always and the client will automatically detect whether to use the RD gateway or not. For example, from my house, if I am connecting to a computer at my work, which requires
the RD gateway, it will automatically pops up the dialog for authentication method. However, if I connect to a computer in my home network, it will just automatically connects without asking authentication for the RD gateway.
However, after installing windows 8, this does not seem to work as expected anymore. The option is checked but the Windows Security dialog pops up in both situations and so i have to either save the rdp file locally and pin it to the taskbar or switch between
disabling and enabling the RD gateway whenever I need to connect to different machines.
Is this a regression in Windows 8? Is anyone else experiencing the same issue?
Thanks

Another way to resolve this issue for me, beside of configuring RDP to connect directly to server also on unmanaged network, will be to turn the "wifi" subnet in a managed network, as the "wired" subnet is.
The differences between thoses to subnets, dynamically assigned by the same DHCP server, are:
The "wifi" is in a private IP range, the "wired" is in a public IP range
There's an ACL on the "wifi" subnet, not on the "wired"
The next step is to compare frames send/received when on the two networks. Something will likely tell for the network to be managed.
Beside, I'm still searching informations about NLA, which is responsible for setting a nework as managed or not.
Here are some clues:
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
http://social.technet.microsoft.com/Forums/windows/en-US/49ea0a6b-9c03-407d-8e26-24a92849a282/network-location-awareness-signature?forum=w7itpronetworking
If anybody has official MS informations about NLA (A for Awareness and not Authentication), please share!

OSX 10.8 server Set VPN server in Local net, How to restrict the Local some IP connect to the VPN server?(noob,so need clearly)

the tittle is my question. I am noob , so I hope i can make my question clear. Now i 'd like to tell you more about my question:
My aim is to set a VPN server in Local lan, then ppl can connect to the VPN server, But I dont wanna all of the Local lan IP cant connet to it. So I neet to set a rule to restrick some local Ip to connect failure, just like banning so IP in a rule.such as: just like the "192.168.4.3~192.168.4.20 ; 192.168.7.3~192.168.7.20 " IPs can connect . the IPs which outside the rules can not do.
my step is following:
1) install server app
2)and then i set a VPN server , finally the VPN server can be connected successfully by local lan computer(PC or Mac)
3)But i found no restrict IP founction in Server app panel.
4)then i down load workgroup manager, and found nothing there about such a founction about IP restriction.
so can you tell me how to aproach my aim?
Please tell me in a clear detail,I am noob
thank you

Won't the password restrict everyone from connecting unless they know the password?
I have never worked with a VPN server, so I can't really add any suggestions. Below are links to Apple support articles, but I'm not sure they will help you:
VPN - Set up Connection
VPN - Advanced Setup
VPN - Connect
VPN - Connect Automatically

How to copy a file from application server to local system

Guys,
Need to copy a file from application server to local system.Is there an FM for the same.
Tried searching for it but couldn't find anything useful.
Code snippets will be highly appreciated.
Warm Regards,
P.
Moderator message: very frequently asked and answered question, obviously you did not search thoroughly, all points removed.
Edited by: Thomas Zloch on Dec 3, 2010 4:48 PM

hi,
You can use the transactions CG3Y or through program u can do like this..
DATA: BEGIN OF IT_FILE OCCURS 0,
                LINE TYPE STRING,
           END OF IT_FILE.
OPEN DATASET <file_name> FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        IF SY-SUBRC IS INITIAL.
          DO.
            READ DATASET<file_name> INTO IT_FILE-LINE.
            IF SY-SUBRC = 0.
              APPEND IT_FILE.
              CLEAR IT_FILE.
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
CLOSE DATASET <file_name>.
Download it to local system using FM - GUI_DOWNLOAD

Spool to PDF. Approach is Spool- app server then app server to local pdf

Hello Experts,
My requirement is: I want to create PDF file from spool number. As my program works in background and FM WS_DOWNLOAD/GUI_DOWNLOAD wonu2019t work in batch mode, I am trying to find its alternative.
I am tiring to upload the internal table PDF[] return by FM CONVERT_OTFSPOOLJOB_2_PDF to application server. But while writing file in text mode, program dumps as it wont support all characters. Hence I am tiring to write in binary mode. Main problem occurs when I download the file from application server, I want to save that file in PDF format on local machine.
I am able to download file from app server to local m/c but that pdf file does not open and says conversion problem. I am sure there must be some steps which I am missing. Might be there is some Fm which convert bin to Text/ASCII.
Can anyone help me this?
-Shweta

If you can avoid using the spool and instead use OTF, this may be easier. Sorry if this doesn't apply.
I tried going from SAPScript to OTF and writing the lines of the PDF table in binary mode but that didn't work for me for some reason.
data: lv_pdf_file type xstring,
         lv_size type i,
         lt_pdf_lines type STANDARD TABLE OF tline.
* pt_otf is passed from the CLOSE_FORM FM
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      FORMAT                      = 'PDF'
    IMPORTING
      BIN_FILESIZE                = lv_size
      BIN_FILE                    = lv_pdf_file
     TABLES
       otf                         = pt_otf
       lines                       = lt_pdf_lines
    EXCEPTIONS
      ERR_MAX_LINEWIDTH           = 1
      ERR_FORMAT                  = 2
      ERR_CONV_NOT_POSSIBLE       = 3
      ERR_BAD_OTF                 = 4
      OTHERS                      = 5
open dataset lv_file for output in binary mode.
transfer lv_pdf_file to lv_file.
close dataset lv_file.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

How to mimic Deski document from BOXI server to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
To Guru's, Would you know if there's a way to mimic Deski document from BOXI server to local machine, pass parameter, execute and save in a mutiple report format then store in a local drive or network drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only. Please let me know your ideas. I would really appreciate your help. Thanks.

Give Chronosync a go - have been using for over a year and it works great; if you like Syncback you'll like this app.

DataSocket Server will not start when the Launch DS Server if Local URL.VI is bundled into a LabVIEW application.

I want to run a LabVIEW application on several machines remotely that do not have LabVIEW installed (licensing issues). Hence I have built a LabVIEW executable with the RunTime Engine to install on all of these remote machines.
The VI has a bi-directional link, using Datasockets, to a machine with DAQ and Image acquisition functions. It primarily receives data items, but also the capability to change data items so it needs to run the "Launch DS Server if Local URL.VI" in order to publish data to the DataSocket server.
When I run the pre-built VI on a machine that has LabVIEW Developers Edition installed, everything works fine - ie.
the DataSocket server starts on the remote machine. However when I build the *.exe application and run it on a machine with and without LabVIEW Developers Edition installed the VI successfully subscribes to the DAQ and Image Acquisiton machine, but it does not start its own connection to the Data Socket server, and hence does not publish the data that the DAQ machine needs to suscribe to. IT seems that the Launch DS Server if Local URL.VI is bypassed? I have fiddled around with the Build settings but to no avail.
In short, how do I get the DataSocket Server to run in a LabVIEW executable? Is it indeed possible? Any advice would be welcomed.
When distributing a Labview Application (*.exe) with Data Socket Server Publish functionality, the DataSocket server does not start and hence no data can be sent by the Remote PC to the Server. The VI successfully retrieves data from the DS Server. I have used the "Launch DS Server if Local URL.vi" in the ditributed application but for some r
eason this VI is not executed when I run the executable. How can you force the DataSocket Server to run with executable LabVIEW applications?

Ryan,
How to add Datasocket Server Control.vi?
Source Files only show Project Files.
So, I added Datasocket Server Control.vi file to the project first.
Then I added it to Always Included < Source Files < Application Properties (Build Executable).
Last, I built the Executable, but it didn't work.
Can you help me.
Thank you.
Pedro Raposo

Problem with "sent" mail folder-how do I trash the prefs in Apple Mail?

Since no one has answered my original request for assistance regarding my "Sent Mail" mailbox, I'll move the issue aside and approach it differently: How do I trash the prefs in Apple Mail without trashing my inbox and all the other mailboxes? Trashing the prefs works for most apps, but if I do that to Mail, I'm screwed. My real problem remains: I can no longer see or read the email in my "sent mail" box; I can see the info identifying the entry, but I can't read the contents of the email. It's all there in the Mail folder on my hard drive, but it doesn't show up in the Mail app.
So how can I trash the prefs for "Mail" without trashing my inbox?

Hello b:
I have only had to trash the Mail preference once, and I cannot remember what occurred (except that the application worked OK after that).
Before you trash the preference file, try rebuilding the mailbox(s).
Barry

Uploading File to server from local machine

how to Upload the File to server from local machine.
Using java applet, how to upload the file to secure server.
I dont know how to proceed the steps for uploading
Reply me ASAP.......

Hi Ozkantr,
The osql utility is installed by SQL Server. You need to make sure the utility is installed on your colleague machine.
To run SSIS package outside the BIDS, only the DTExec utility which is a client tool is not enough, the server components for Integration Services Service (SSIS runtime) is also required. To install SSIS runtime and DTExec utility, we must install the Integration
Services shared feature from the SQL Server install media. So, you need to install SSIS service on the machine where the SSIS packages jobs run.
References:
http://www.bigator.com/2012/03/11/ways-to-execute-ssis-package/
http://www.codeproject.com/Articles/219494/SSIS-Overview-Part-I
Regards,
+1
You need to install Integration Services, which installs the necessary bytes on your computer and the SSIS service as well. The service can be disabled though, you don't need it to run packages.
I wrote a blog post about it some time ago:
When is DTEXEC installed?
ps: osql is deprecated. Better start using sqlcmd.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

DNS: Client can't connect because .local domain isn't in DNS. How can I connect over the WAN to server.domain.local?

So my 2012 server is set up on the LAN with a .local domain name.
Remote Desktop Services are set up and remoteapp stuff works fine on the LAN.
I've set up port forwarding so I can connect to the server over the WAN too, but remoteapp stuff is a bit different. I can connect to the server by specifying the correct IP address. Giving a Web browser the address
https://serverIPAddress/RDWeb
lets me get the login screen and see the range of apps for me to run. I select one, the connectoid is downloaded correctly (in Chrome) and I click on the downloaded connectoid.
Unfortunately, rather than pursuing the sensible IP-address approach that I started with, the connectoid has been given the server's name on the LAN: server.domain.local. Clearly, the client machine tries to look this up but DNS hasn't heard of
it because it's a .local address.
I cannot be the only one to have come across this apparent oversight on Microsoft's part. Any ideas as to how this can sensibly be overcome? Obviously, I could put the IP address translation into every client's hosts file (and I've done this and shown it
works) but I've got too many clients to mess about like this. Anybody know 'the Microsoft way' to fix this?
Thank you for checking this out -- I am confident the details of the problem are completely specified in this query but, if I'm wrong, please ask.
Many thanks again,
Biffo

Hi,
I would like to suggest you to follow the checklist.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Trashed iPhoto prefs now 10,000 phoptos gone

My iPhoto was running really slow. I had about 10,000 photos on it. The spinning beachball was happening everytime I tried to do anything. I restarted several times, rebuilt permissions. I then thought that I would trash the iphoto prefs . I did this but discovered to my horror that I had no photos in my library. I have a back up on an external drive but some photos, not really important but, I would love to be able to get them back if possible.
I did not think that trashing the prefs would have such a devestating effect. Any help would be great.
thanks
Dave

Hi Dave, navigate to the Pictures folder on your computer and see if the iPhoto Library folder is there. do you have another name for the library other than iPhoto Library? if you do, then that was the problem.
If the library is in the Pictures folder, or wherever you had stored it, then hold down the Option key and keep it held down while launching iPhoto until you get a message screen. In that screen click the "choose" button and navigate to your library folder, select it, and hit "open"

Firefox 30.0 will not open profiles on my server, only local ones. (Ubuntu 14.04 LTS)

I get the dreaded "Profile in use" error any time I try to open a profile that's stored on my network attached file server (it works fine for locally stored profiles).
I get this only under Ubuntu 14.04. I'm also running FF 30.0 under Windows (including in a VMWare virtual Windows machine under Ubuntu) and it works fine.
It's creating a .parentlock file each time, then claiming the profile is in use, then leaving the .parentlock file upon closing the message box. Deleting the .parentlock file by hand doesn't fix it: it creates it again the next time I try to run and again claims the profile is open. This happens for every user and every NAS profile on my system. But again, only under Ubuntu 14.04, not under Windows, and only for profiles on my server, not locally.

This is mote likely a problem with (write) permissions of files in the Firefox profile folder.
In Firefox 13+ the parent.lock (Windows) or .parentlock (Linux, Mac) file is no longer removed in order to detect startup failures (crashes) and offer to start in Safe mode.

Trash/Junk prefs (server vs local)

Similar Messages

Maybe you are looking for