Trash preferences at startup? Alert or not?

I've had to trash my preferences for Illustrator recently and used the Cmd-Opt-Shift-Ctrl method.
I've been a little confused that there wasn't any alert confirming that I wanted to trash the prefs.
Can someone confirm that Illustrator DOESN'T give this alert dialog when trashing the prefs?

This is what I see when I press the same keys as InDesign starts up. And it's been like this since the first version.
So you're saying Illustrator doesn't have this?

Similar Messages

Adobe InDesign CC, Startup Alert Plugins not valid.

Installed Adobe CC (Full Suite) on a clean (no other programs) OS X 10.7.5 iMac.
First launch of InDesign CC and we get the following 6 Startup Alerts:
1.
Adobe InDesign does not recognize Assignment UI.InDesignPlugin as a valid plug-in. Please reinstall the Assignment UI.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
2.
Adobe InDesign does not recognize InCopy Bridge UI.InDesignPlugin as a valid plug-in. Please reinstall the InCopy Bridge UI.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
3.
Adobe InDesign does not recognize InCopy Bridge.InDesignPlugin as a valid plug-in. Please reinstall the InCopy Bridge.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
4.
Adobe InDesign does not recognize InCopyExport.InDesignPlugin as a valid plug-in. Please reinstall the InCopyExport.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
5.
Adobe InDesign does not recognize InCopyExportUI.InDesignPlugin as a valid plug-in. Please reinstall the InCopyExportUI.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
6.
Adobe InDesign does not recognize InCopyImport.InDesignPlugin as a valid plug-in. Please reinstall the InCopyImport.InDesignPlugin plug-in and restart InDesign.
Show this alert again?
Any Explanation would be appreciated! A solution would be great!!
Thanks.

I found the permissions was a red herring for me - first time I run InDesign CC I get errors for all 6 plugins, then afterwards I only get one - but log out and in again, and they all come back.
I too am running a packaged installation built using the official Adobe CC packager.
My solution was that I found a load of symlinks are missing for the plugins the errors are thrown for. I manually recreated them and the errors are gone for good.
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/Versions/Current/InCopyImport" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/InCopyImport"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyImport.InDesignPlugin/Resources"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Versions/Current/Assignment UI" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Assignment UI"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/Assignment UI.InDesignPlugin/Resources"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/Versions/Current/InCopy Bridge UI" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/InCopy Bridge UI"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge UI.InDesignPlugin/Resources"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/Versions/Current/InCopy Bridge" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/InCopy Bridge"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopy Bridge.InDesignPlugin/Resources"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/Versions/Current/InCopyExportU I" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/InCopyExportUI"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExportUI.InDesignPlugin/Resources"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/Versions/A" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/Versions/Current"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/Versions/Current/InCopyExport" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/InCopyExport"
ln -s "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/Versions/Current/Resources" "/Applications/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkflow/InCopyExport.InDesignPlugin/Resources"
Hope this helps someone!

Latest update of pref. manager not trashing preferences?

Hello to all. I have observed twice in the recent past that when I trash my preferences after an editing sesion, that there are no files in the trash bin for emptying. This development has taken place only after my updating to the latest version [? 4...]. When I am opening preference manager I find that it still has version 3.2.1 only. When I tried to update to the latest version again I was informed that it was up to date. May I be informed of what the trouble is and how to get the preferences trashed?

Thanks Jon.
I had opted to upgrade to version 4 when that option popped up while I was yet using a fully functional preference manager!
The earlier version was right there in its own place in the applications slot for it and I had not even meddled with it, no, not even in my dreams.
Upgrade done, when I had trashed preferences with FCPX checked, no files turned up at that time. I did not pay any attention to that presuming that there were no preferences to get the trashing. It was only when there were no trashing taking place on two later occasions that I woke up to the fact that preferences were not getting trashed.
Thanks for your concern regarding this problem and the care you have taken to give this statement:
' hopefully this will be useful if anyone else stumbles on this thread.'
It is written, 'He who waters others will himself be watered'.
May you be watered abundantly.
Regards. Have a great day.
Dr. Somanna

Under APPLE MENU system preferences only opens sporadically, mostly not

Under APPLE MENU system preferences only opens sporadically, mostly not. I booted up with installation disk and ran a check but everything was alright. However, when I tried to click on items using the disk as a startup disk it frequently wouldn't function.

George,
Thanks for asking that question.
I offered this solution based upon similar successful advice which was given to another poster who solved this problem:Long story short I ended up reinstalling Mac OS X using Archive and Install. When I first used the computer following reinstalling Mac OS X, I was able to access the System Preferences by selecting them under the Apple in the menu bar. However, I have now updated my software using Software Update, and now I can't access System Preferences when I click on them under the Apple in the menu. The computer just acts like I never selected System Preferences.
Where have System Preferences gone??? provides another example of Previous Systems folder interfering with System Preferences.
Applications don't work after reinstalling Mac OS X explains a different problem with a Previous Systems folder: Example 1: You downgrade by performing an Archive and Install installation, but do not update to a later version of Mac OS X. The Previous Systems folder contains later versions of applications that may contribute to this issue.If you have proper backups, I recommend trashing the Previous Systems folder as soon as you can determine that the new system is functioning properly. The Previous Systems folders will either take up too much space or contribute to unexplained system problems.
;~)

My Startup Disk can not show in Finder.

My Startup Disk can not show in Finder.but it can be used in OSX normally.
So can I put it back to Finder?

If the startup disk is for Mac OS 9, neither MacBook nor PowerMac G5 can boot into 9. Only the PowerMac G5 can use Mac OS 9 in Apple menu -> System Preferences -> Classic.
Please be more detailed what sort of Startup Disk you are talking about, which operating system, and which machine this is a problem with.

CS6 crashes after trashing preferences - programs opens but crashes

Hi, there-
I'm on a shoot location and really need my CS6 to work ASAP! Thanks in advance.
I was using tools and found they wouldn't "let go." What I mean is, say, selecting something, then moving the pointer off screen and clicking, which usually undid what I'd selected, no longer worked. That was just one tool, but a few others misbehaved of late as well.
I restarted CS6 and trashed the preferences, as I have done in the past to solve problems like this
Now - PS opens and the pointer is frozen for a moment. When I click to open a photo, the program freezes and crashes.
After opening the program again and making sure to quit after saving the trashed preferences and again getting a crash - here I am.
Help, please! I was wondering if I could do any kind of Time Machine-type process where I could go back to my previous system that worked, bugs and all because I really need to edit photos, but could not find.
Here's my system screen shot - thank you again in advance!

Thank you, Benjamin.
Yes, indeed, you have misunderstood my question, but thanks anyway.
Let's try again - never mind "clicking in the grey areas" - forget that.
Here is my problem.
I trashed my preferences, now photoshop crashes when I attempt to open any photo, and computer must be restarted.
Anyone who can help, much obliged, thanks.

Ical alerts are not working on Lion

I've got a problem with the new ical on Lion: alerts are not working. Any clues?
(The "turn off all alerts" is unchecked )

Same problem, alerts are not being triggered. I am getting fast and perfect syncronizing between iCal, MobileMe Cal, and iPhone. But alerts are not happening consistantly.
Unreliable notification is a big problem.
I looked in my user preferences as noted by "xbarn" but there's no iCal login item. Can't imagine that iCal would need to be running for events to activate, since they are syncing correctly without iCal open.

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Alert-original not found.

Running iPhoto 8.1.2. I get the above alert with the option to cancel or find photo. I cannot find the photo.

Alert-original not found..
is that the exact error you received?
do you have a referenced ((The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended.) or a managed library (that option is checked)?
LN

No video playback after trashing preferences

I'm hoping this is something simple? Last month, I can't remember why, but it seemed like a good idea to trash preferences - no, apparently noone ever made a backup copy. So now I can't see the video when playing back from the timeline. I've been changing audio /video settings with hardly any resulting changes. If I have DV NTSC 48 Khz, with Apple Firewire selected, I don't get audio or video - I just get a still image that refreshes only when i reposition the mouse. If I change it to Digital Cinema Desktop Preview, I get audio, but no changes in video. If I select "none" I do get audio, but no video. Nothing gives me video. I do swap back and forth from outputting to a VHS deck using the infamous DC30+card (and that was the last thing I was doing), but I've since disabled the driver.
Of course, have time constraints - and operate under the assumption that everything should work like it was working last time it was working well, leaving me free to just create and edit away...mybad.

When you trashed prefs, did you use FCP Rescue...
http://fcprescue.andersholck.com/
or FCP Attic...
http://www.chesa.com/pro/
I've not used Attic, but would guess it allows same functionality of Rescue where, once you have good working preferences, you can store a 'backup' of these prefs, then whenever needed, simply 'restore' them.
K

Alert is not getting triggered in QA

Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
Preethi

Hi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i.         Choose View ® Jobs.
ii.       If no other job has been scheduled, choose Job ® Create.
iii.      Enter a job name and confirm it.
iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
v.        Choose Schedule Job.
vi.      Choose Schedule periodically.
vii.     Select the interval you require, such as 10 minutes.
viii.   Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

Iphone 4 Alerts Tones Not Working / Ringer Is WORKING KINDLY REPLY ME

HI , PLEASE HELP ME I WANT TO FIX THIS ISSUE THAT I AM GETTING PLEASE HELP
MY ISSUE IS IPHONE 4 ALERTS TONES NOT WORKING AND CALL RINGER IS WORKING.. PLEASE HELP ME!

If the iPhone came from the US then it is locked to AT&T. To unlock an iPhone the original carrier is the only one who can unlock the iPhone and AT&T will not unlock iPhones. So there is not official way to unlock the iPhone 4.
At this point there is no way to hack the iPhone 4 running 4.2.1 to unlock it either so the phone and messaging apps will never work. You basically have an iPod touch.

Startup class is not working in oc4j

hi
I have a servlet .In init of that servlet I will create an instance of a startup class .
In web.xml configuration I gave <load-on-startup></load-on-startup> .I created a war and an ear and deployed my application .The startup class is not called.
But when I configured the servlet in the default-web-app the startup class is running.
And furthur when I hot deploy my ear the startup class is running.
But when I restart my application server the startup class is not invoked.
can anybody help
Regards
Gajendran.G

hi
I had put auto-start=true in server.xml .then also it is not working.
when I redeploy my ear,the startup class is invoked,but when i restart the
server it does'nt
gaj

Alert is not working for a library

Hi,
Alert is not working for one library in a site collection only. For others it is working fine. So, we have taken the template of the library and created a new library and tested there, alerts are working fine also.
So any idea what can be the issue?

Hi
Try troubleshooting using the link
http://blogs.technet.com/b/steve_chen/archive/2009/11/20/alerts-in-sharepoint-troubleshooting-moss-wss.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

Here's the story...
I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
I decided to reinstall windows.
I deleted the windows partition using BootCamp.
Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned You must have at least 10 GB of free space available"
After reading several posts on this forum I decided to defrag the hard drive and try again.
The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
Any suggestions?
Also, I tried repair disk and repair permissions
Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)" Could the 32-bit requirement be an issue? Is lion 64-bit?

Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

Trash preferences at startup? Alert or not?

Similar Messages

Maybe you are looking for