Trasnparent proxy and reverse proxy at the same time

Can I have in a Content Engine v 4.2 transparent proxy and reverse proxy at the same time ?

Yes, as long as you are not redirecting the two services on the same interface. One service takes precedence over the other and I believe transparent web-cache redirect takes precedence over reverse-proxy.

Similar Messages

Unable to activate internal and external urls at the same time

Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & Regards

Hi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this..

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

IS there a way to load and purchase different photos from iPhoto and ship them at the same time? the only way that I can find is to purchase each photo (or multiple of one) at a time, which increases the cost of shipping, as I want to get one print of 20

Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?

Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

Is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

I have an ipod 2 generation, but it wont charger or turn on. i try pressing the power and home button at the same time but it still wouldnt work. what else should i try to do?

One day I was going to download music from my laptop to my ipod, I was able to download all the songs I wanted but later when I try to charger my ipod it wouldn't let me. The next day I bought a new charger but it still didn't charger. I try pressing the power And home button at the same time but it still wouldn't turn on or charger.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

10.3 and 8.1 at the same time

I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far.
I have:
installed 10.3 in a new directory, C:\bea103
I'm running 8.1 in the default C:\bea
changed the point base ports in 8.1
changed the http/https ports in 8.1 to 8001/8002
any ideas on what else I should do?
I can start on or the other. When 10.3 is running 8.1 outputs the following to the console (Class paths have been chopped for length and the start command edited for legibility):
JAVA Memory arguments: -Xms96m -Xmx256m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Starting WLS with line:
C:\bea\JROCKI~1\bin\java
     -jrockit
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms96m
     -Xmx256m
     -Xverify:none
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -Dplatform.home=C:\bea\WEBLOG~1
     -Dwls.home=C:\bea\WEBLOG~1\server
     -Dwli.home=C:\bea\WEBLOG~1\integration
     -Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml
     -Dweblogic.management.discover=true
     -Dweblogic.ProductionModeEnabled=
     -Dejbruntime.database=pointbase44
     -Dweblogic.security.SSL.ignoreHostnameVerify=false
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.Name=portalServer
     -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Stopping the Weblogic Workshop debugger...
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
Here is the console output when 8.1 is running and I try and start 10.3 (edited as above):
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=512m -XX:MaxPermSize=160m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java
     -client
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms512m
     -Xmx1024m
     -XX:CompileThreshold=8000
     -XX:PermSize=256m
     -XX:MaxPermSize=512m
     -XX:MaxPermSize=160m
     -XX:MaxPermSize=192m
     -Xverify:none
     -da:org.apache.xmlbeans...
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -ea:com.bea.wli...
     -ea:com.bea.broker...
     -ea:com.bea.sbconsole...
     -Dplatform.home=C:\bea103\WLSERV~1.3
     -Dwls.home=C:\bea103\WLSERV~1.3\server
     -Dweblogic.home=C:\bea103\WLSERV~1.3\server
     -Xmx1024m
     -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
     -Daldsp.home=C:\bea103\odsi_10.3
     -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
     -Dweblogic.wsee.bind.suppressDeployErrorMessage=true
     -Dweblogic.wsee.skip.async.response=true
     -Dwcb.properties.url="file:///c|/bea103/user_projects/domains/WCB_Developer_Domain/app
     -parms/"
     -Dlog4j.configuration=file:C:\bea103\USER_P~1\domains\WCB_DE~1\apacheLog4jCfg.xml
     -Dweblogic.management.discover=true
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wli1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\patch_alsb1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_aldsp1030\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content
     -mgmt\lib\system
     -Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security
     -Dweblogic.Name=AdminServer
     -Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Stopping PointBase server...
PointBase server stopped.
\Windows was unexpected at this time.
So I'm stuck, can any one point me to some documentation or anything at all to get me moving forward on this?
Thanks
John

Hi
Did you change this 8453 to someother value for one of the domains. This looks like a Pointbase DB Debug Port. First change main pointbase db port and then change this debug port value also in setDomainEnv.cmd file.
HTH
Ravi Jegga

Trasnparent proxy and reverse proxy at the same time

Similar Messages

Maybe you are looking for