Trasport request target system
hi all .
Is there any possibility to know the target system of trasport request ? .
I am able to get the detail through table E070 and E071 .
but it showing only one target system .
But request trasferred to more than one system .
i.e to say quality and production .
I can see the detail via t.code se09 it is showing both systems .
but not getting in database table E070-tarsystem .
plz help me , its urgent .
thanks in advace ..
Hi,
Well, as it's urgent.
The transport landscape is defined in transaction STMS, then click on Transport Routes.
Regards,
Nick
Similar Messages
-
How to set a default target system in a change request
Hello,
I would like to set up a default value for the target system when I create a change request,
for example, if I create a CHR in "DEV" system, it would auto fill the "Target" field with "TST"
I tried to look for TPPARAM parameters or some Global ones,
but with no luck
Anyone got a clue how to do it?
Thanks.Hi Elhanan,
The next system depends on the transport route.
and the transport will follow the route assigned. this again depends on the transport layer assinged to the development package of the object.
so the assignment is like this.
Dev object > Development package (previously called dev class) > Transport layer > Transport Route
for more information, please see the help.sap.com software logistics part.
http://help.sap.com/saphelp_nw04/helpdata/en/60/e3fcfae36811d184810000e8a57770/frameset.htm
Hope this helps,
Debasis. -
Target System in transport request is blank
Hi
I set the transport system in a scenario DEV, QAS and PRD.
When I create an order request, the field target system is blank.
Where should I set it for me automatically display the system QAS as a system target ?
Thanks,
EnriqueHi,
just adding my solution for future references..
I had similar problem but when I checked our transport package it was showing wrong transport layer..
Make sure your present transport package transport layer attribute is correct or not by using se21 or se80.
we have entered correct transport layer under our package and all working fine. -
InfoCube Error Message: Choose a change request with target system BWQ
Hi experts,
I have a problem when I want to edit an InfoCube created by other developer. The error message received is as follow:
"<b>Choose a change request with target system BWQ</b>".
When I click on the Documentation (F9) button, the detailed message is:
"Message no. TK511
Diagnosis
The selected change request BWDK901086 has target system .
However, the objects you edit can only be recorded in change requests with the target system BWQ.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System response
The selected change request BWDK901086 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request BWDK901086.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System ."
Can someone helps me to solve this problem?
Thanks!hi Fullham,
try se09/10 and find request BWDK901086 (use binocular icon) or se03. then double click that request, go to tab 'properties', hope you will see 'Target System' system there, click 'edit'/pencil icon and change it to BWQ.
you may need to change the owner (which may not authorized), ask basis help if necessary.
hope this helps -
Error "Choose a change request with target system..."
Hi experts,
I am trying to change an infosource and keep getting this error "Choose a change request with target system BWQ"
How do I correct this?
Thanks!Hi,
Check out source system Id's are properly assigned or not.
go to tools ( CtrlShiftF11)
assign point if it helps
Regards,
sandeep -
Standard SAP periodic job to schedule import of requests in target system?
Hello Folks,
Is SAP standadard job available to schedule periodic import of requests available in the target system. I know it is not advisable to do something like this, but i remeber some one telling me there is one available.
Regards,
PrashantThanks for you replies folks... so...there's no standard job available. Its got be scripts at OS level, and ofcourse scheduling "import all" options....
but as we agree, this is not a recommended option.
Have a good day...
regards,
Prashant -
Locationg source system object transport request number in target system .
Hi,
After the object is pushed from source system to target using SCC1 for cross clients but same systems or STMS for cross-systems, if we want to see the object's source system's transport request number in the target system, how can we see that ?
Regards,
Rajesh.Hi Rajesh
If my understanding is correct you want to know the source server in the target system( i.e where we have transported).
For cross-system objects, as you know we use STMS to transport them...
In the target system:
1. SE10
2. Click on Transports button.
3. Select the required request and expand the node.
4. You will have the first one which has log only for Export.
The node with only Export log is the source system...
Hope this helps...
Kind Regards
Eswar -
How to find the source and target systems of an imported Transport Request?
Hello,
How to find the source and target systems of an imported Transport Request?
chinna.Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok -
Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component -
Creation of Trasport request for the Deletion of Infoset from Dev
Hi
i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production.
i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request.
could any one help me out for this issue.
Thanks
SandyHi
I suggest you to transport the Infoarea under which the Infoset query is deleted
This will adjust all your changes including any deletion or any new changes
Assign points if useful
Thanks
N Ganesh -
How to determine the target system during runtime of a Generic DS?
Hi Experts, good afternoon.
I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
Plese, help!!!
Thanks in advance!
Leandro VaniLeandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck. -
Call RFC for Lookup from BPM. how to determin the correct target system
Hi
I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
Any idea why is such an error occuring
Regards
NikhilNikhil,
Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
Regards
Bhavesh -
How to add Target System to Remote Comparison in Version Management
Hello,
We have defined an RFC connection from System A to system B. We want to use system B for remote comparison or programs from system A. However, when we choose (from SE38):
Utilities -> Version Management -> REMOTE Comparison -> Target System
system B does not appear in the list.
How can we add system B to this list?
Thanks and Regards.
Reenago to the object which u want to compare
go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
and next press compare
hope it will work
cheer
s.janagar -
How to Make sure the doc is there in the target system??
Hello Everybody-
I am trying to send a vendor master to a R/3 system from XI via Proxy,I did not write any code in Proxy yet as it will be written by the ABAP guys later in the R/3 system, I see a checkered flag in the XI monitor,but is there any way i can make sure the document has reached the target system?
Thanks
VenkatBelow is the XML i am sending
<b> <?xml version="1.0" ?>
- <GenericVendor>
- <GenericVendorRecord>
<GenericVendorID>0000010015</GenericVendorID>
<BusinessPartner />
<GroupID>533</GroupID>
<LocalPartnerID>0000010015</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>778 Sunny Drive</Street60>
<TextLong>Auto Supplier</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010017</GenericVendorID>
<BusinessPartner />
<GroupID>534</GroupID>
<LocalPartnerID>0000010017</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>333 Clint Street</Street60>
<TextLong>Auto Switches Inc</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001006</GenericVendorID>
<BusinessPartner />
<GroupID>535</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001006</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cleveland</City>
<Street60>500 Woods Street</Street60>
<TextLong>Bosch Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001006</GenericVendorID>
<BusinessPartner />
<GroupID>535</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>0000010012</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Cleveland</City>
<Street60>500 Woods Street</Street60>
<TextLong>Bosch Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001004</GenericVendorID>
<BusinessPartner />
<GroupID>536</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001004</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>555 Superior Street</Street60>
<TextLong>Dana Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001004</GenericVendorID>
<BusinessPartner />
<GroupID>536</GroupID>
<Country>Canada</Country>
<LocalPartnerID>0000010010</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Toronto</City>
<Street60>555 Superior Street</Street60>
<TextLong>Dana Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010014</GenericVendorID>
<BusinessPartner />
<GroupID>537</GroupID>
<LocalPartnerID>0000010014</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>500 Charlotte Road</Street60>
<TextLong>Gates Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010013</GenericVendorID>
<BusinessPartner />
<GroupID>538</GroupID>
<LocalPartnerID>0000010013</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>500 Woods Street</Street60>
<TextLong>Metaldyne</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010011</GenericVendorID>
<BusinessPartner />
<GroupID>539</GroupID>
<LocalPartnerID>0000010011</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>555 Superior Street</Street60>
<TextLong>Teleflex</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010006</GenericVendorID>
<BusinessPartner />
<GroupID>540</GroupID>
<LocalPartnerID>0000010006</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>700 Sunny Drive</Street60>
<TextLong>Tenneco Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010007</GenericVendorID>
<BusinessPartner />
<GroupID>541</GroupID>
<LocalPartnerID>0000010007</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>test</Street60>
<TextLong>The Budd Co</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010016</GenericVendorID>
<BusinessPartner />
<GroupID>542</GroupID>
<LocalPartnerID>0000010016</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>1000 Tara Belle Drive</Street60>
<TextLong>Tire Supplies</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001001</GenericVendorID>
<BusinessPartner />
<GroupID>543</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001001</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Houston</City>
<Street60>111 Corporate Way</Street60>
<TextLong>Visteon Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001001</GenericVendorID>
<BusinessPartner />
<GroupID>543</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>2000001001</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Houston</City>
<Street60>111 Corporate Way</Street60>
<TextLong>Visteon Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001009</GenericVendorID>
<BusinessPartner />
<GroupID>545</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001009</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>777 Highway Drive</Street60>
<TextLong>Continental Tire</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001010</GenericVendorID>
<BusinessPartner />
<GroupID>546</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001010</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>333 Beach Street</Street60>
<TextLong>Cooper Standard</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001007</GenericVendorID>
<BusinessPartner />
<GroupID>547</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001007</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>546 Pebbles Road</Street60>
<TextLong>Fed Mogul Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001003</GenericVendorID>
<BusinessPartner />
<GroupID>548</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001003</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>777 Highway Drive</Street60>
<TextLong>Goodyear</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001002</GenericVendorID>
<BusinessPartner />
<GroupID>549</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001002</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>777 Sunny Drive</Street60>
<TextLong>Johnson Controls</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001005</GenericVendorID>
<BusinessPartner />
<GroupID>550</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001005</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Chicago</City>
<Street60>111 Canal Street</Street60>
<TextLong>Kautex</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001011</GenericVendorID>
<BusinessPartner />
<GroupID>551</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001011</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>123 River Drive</Street60>
<TextLong>Lear Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001008</GenericVendorID>
<BusinessPartner />
<GroupID>552</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001008</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>778 Sunny Drive</Street60>
<TextLong>Tower Automotive</TextLong>
</GenericVendorRecord>
</GenericVendor></b>
and the error iam getting is.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (; error ID: ; ( )) PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000001 XML Bytepos.: 865 XML Path: GenericVendor(1)GenericVendorRecord(3)Country(4) Error Text: Data loss occurred when converting United States Minor Outlying Islands Kernel ErrorId: CONVT_DATA_LOSS)) Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000001 XML Bytepos.: 865 XML Path: GenericVendor(1)GenericVendorRecord(3)Country(4) Error Text: Data loss occurred when converting United States Minor Outlying Islands Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXS00000000000000000001 Data loss occurred when converting United States Minor Outlying Islands</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error><b></b>
Message was edited by: Venkat Yalamanchili -
CHARM error - No Target system for Normal transport generated from another client
Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salmanyes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change
Maybe you are looking for
-
4s Hotspot tethering only works with USB and BT but not with wifi
Hi, XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but w
-
Pdf not opening in firefox 3.53
using adobe acrobat 9.1 on windows vista, 4 gb ram, nothing happens when attempting to open online pdf. Firefox menu and toolbars are displayed and the rest of screen changes to blank white with small done in bottom left hand corner of firefox scree
-
Last of 6 flvs - no video, only audio
OK, I've been working on six short videos for a client. Workflow is 5 final cut pro sequences --> 5 Quicktime referenced files ---> Adobe Media Encoder CS4 --> 5 640x480 FLV files. Testing FLVs using Adobe Media Player. They work great. (FWIW - I tes
-
photoshop upgrade, do i need to uninstall ver 9 or should i? after installing ver 12.
-
Can you customize an Indicator/Control shape?
Hello everyone, This is a question that has puzzled me for a long time. Is it possible to make an indicator/control any shape other than a rectangle? I am well aware of creating custom controls and using .pngs as a method of making controls appear ir