Trasport Sequence

Hi Experts,
On BW side,
I have about 40 Transport Requests out of which there are 20 Transport Requests that are successfully been transported from 'BW Development System' to 'BW Testing System' over the period of last 2 months.
Now, I would like to move them from 'BW Development System' to 'BW Testing System'.
Instead of again collecting the objects and creating new Transport reqeusts to trasport from 'Development System' to "Production System', I would like to know the best possible sequence in which I should send my already existing transports.
Let me know if there are any changes that you suggest to the below sequence that I would like to follow:
InfoObjects
Infosources
Transfer Rules
ODSs and update rules
Infocubes and update rules
multiproviders
infosets
Infopackages
Process Chains

As you already tested your transport and worked, I think you should go with the same transports to move it to QA / Prod.
Make sure you included Info Area and InfoObject Catalogs too.
The sequence looks good to me but it vary person to person also.
This may be interest for you -SAP BW and Transports:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Hope it helps..

Similar Messages

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Is there a way to create a renaming preset where the sequence starts at the number "0" zero?

What I am trying to achieve is the following:
Fro example, I am photographing a handbag and I need to rename the file using a barcode and a barcode scanner.
My sequence of images goes like this:
Image 1: Tag shot
Image 2: Front
Image 3: Back
Image 4: Inside bag
Let's say the barcode once scanned produces a code such as TRE8801AZT16-Z
Right now my current preset is "Custom Text_Image # (1)"
This results with the images being renamed as:
TagShot: TRE8801AST16-Z_1
Front: TRE8801AST16-Z_2
Back: TRE8801AST16-Z_3
Inside bag: TRE8801AST16-Z_4
What I need is the sequence to start at zero so the tag shot is _0 and my images are named like this:
TagShot: TRE8801AST16-Z_0
Front: TRE8801AST16-Z_1
Back: TRE8801AST16-Z_2
Inside bag: TRE8801AST16-Z_3
Is this possible? If yes, how?
Thanks for the help
Cody

About as close as you can get is to right-click on a single clip and Make Multiclip Sequence. Hit OK to make an sequence out of the single clip. Open the sequence made and delete the multiclip and edit the clip you want back into the sequence.

Error while creating sequence - related to xdb installation?

I'm getting the following error while creating a sequence -
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-20000: Trigger xdb_installation_trigger does not support object creation of
type SEQUENCE
ORA-06512: at line 32
oracle xml db was installed on this instance.
Is there a way around it? We want oracle xml db installed but we still want to be able to create and drop sequences!

Hi Expert,
In T-Code: OB52, We need to open the period 001 for Year - 2012 for the Account Type - S and for GL Account - 799999.
Configure as shown below for your Posting Period Variant:
Account Type: S
From Account: (Only provide any GL Accounts From Range, If you require any specific GL Accounts to be open. Else leave blank)
To Account:(Only provide any GL Accounts To Range, If you require any specific GL Accounts to be open. Else leave blank)
From Period: 01
Year: 2012
To Period:01
Year:2012
From Period:13
Year:2012
To Period:16
Year:2012
Save
Regards,
GK
SAP

All of a sudden I can no longer toggle or clip angles in multiclip sequence

Hi,
I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
I am not out of disk space and haven't changed any settings as far as I am aware of.
Thanks

Not sure what the deal is...have you added any new software or upgraded/updated anything since this started?
Have you tried opening an autosave version, to see if it works there?
Trashed prefs, run disk utility?
I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
Have you tried shutting down, then rebooting after 15-20 minutes?

New Access Sequence for Free Goods Determination

Hi Guru's,
I Have a scenario wherein i have to maintain the free Goods Condition records in VBN1 with a new access sequence namely Customer/Distribution Channel/Plant/material.
I have maintained all the necessary settings such as Free Goods Activation for Item Category, Assignment of free goods pricing procedure to my sales area,Positioning of R100 condition type in my pricing procedure with relevenat routines.
At my Sale order level after maintaining the free goods condition record in VBN1 in new access sequence, my free goods determination is not happening and at the sme time if i maintain it in the standard access sequence i.e. in Sales Org/Dist.Channel/Customer/material the free goods are getting determined.
Can anybody help me out in this..
Regards
Bhushan

Hi
There arew 2 things to be done or checked
1. Position your access sequence before the standard one by giving step nos accordingly
2.In the existing sequence check for the exclusive indicator in the standard sequence and i think that is ticked in your case
Hence after getting the condition record in the standard sequence the system stops searching for the new records in your new access sequence
If that is the casethen remove exclusive indicator from the standard one and tick the same in your new access sequence
By this you can get the condition records of your new access sequence without positioning
Pls reply whether mu suggestion has helped you
Raja

How to keep messages in sequence of different interfaces (using queues?)

Dear experts,
I'm running a scenario in which a job in one system creates and deletes orders in another system via XI (using idocs). I'm sending 100 times more creations than deletions.
These are two different interfaces. Therefore they use different queues.
My problem now is that sometimes a deletion enters the target system before the the creation of this order has taken place. Because the queue is much shorter for deletion, these are processed earlier.
How can I make sure that message from two different interfaces enter and then exit xi in the same sequence? Is it possible to assign them to the same outbound queue?
Please advice.
Thanks in advance.

hai
check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0401ea9-0be5-2910-b389-ce9675ab8af9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0111fef-d311-2a10-c0b9-f33a49c1f2e5
note:reward points if solution found helpfull.....
regards
chandrakanth.k

How to populate sequence in a text item in a form

I have a text item in a form.I want that the doc_id i.e the text item should be automatically populated with the help of sequence.I have created sequence named seq_doc_id.on which trigger i should write the code so that everytime the doc_id gets incremented by one. What should be the code.Can anyone gv me some hint.Do i have to use the loop for this?Please help

Hi,
I implemented a when-new-block-instance that does just that,
however due to navigation problems the trigger fires when it should not
the result is I got holes in the sequence.
Is there a system variable status to check with an If test
to make sure the sequence is called only at inserting time?

How to? Populate sequence in 2 Entities comprising 1-1 View Object

Hello all,
In my DB model, I have modeled sub types of an entity by having a main table with the common fields and then separate tables (with 1-1 relationship) to the main table with the fields that are specific to each type. Each of these tables has an ID column as the PK. I have created a trigger on the main table to auto-populate the ID from a sequence. If I have a VO based upon 2 of the entities (in a 1-1 relationship), how can I get the sequence # from the main table in order to populate the specialized table?
Regards,
john

The TreeViewAdaptor is responsible for mapping your custom data to the tree view itself. I almost always start by making it return some fixed number of objects with names "item 1" etc. That way you get the tree view working first.
Then, after you get it laid out and displaying properly, you can worry about using real data. At that point, you have your adaptor return the actual number of items in your list and each individual item. Then you can populate your list when you push your button and then invalidate the IControlView of the tree view widget to cause it to redraw. At that point your adaptor will get called and your data should appear.
Jon
"Expert for hire"

What does it take GG to replicate Sequence

Hello All,
We have sequences which create values used for Primary Key. We are on the process of creating replication between Oracle Databases.
I was going through the documentation, it has certain steps mentioned which is mostly for initial data load. (Installing Support for Oracle Sequences in Oracle Installation and Configuration Guide 12.1.2)
My question is do I need to follow those steps for online change synchronization also? Or we can skip ?
Thanks,
Basu

Hi Basu,
Yes, The Oracle documentation is always correct. You can follow the steps which they have mentioned in the link
https://docs.oracle.com/goldengate/1212/gg-winux/GIORA.pdf
10.2 Installing Support for Oracle Sequences
Regards,
Veera

Media Encoder CC won't import a JPEG sequence to the queue

I am running Media Encoder CC 7.2.2.29 (64-bit) on OSX 10.9.4.
I have a JPEG sequence GoPro timelapse image sequence that I want to encode into a video clip. All files have a .jpg extension. They are 4000x3000 and have an RGB color space. The Color profile is SRGB IEC61966-21. All images are 3.9MB.
According to the ME help I should do the following.
To add an image sequence, choose File > Add Source. In the Open dialog box, choose the first file of the image sequence. Enable the Sequence Import checkbox for your file type, and then click the Open button.
I follow the instructions and select the first image in the sequence. The "JPEG File Sequence" checkbox is active and I check it and click the Open button. The dialog disappears and nothing happens. There are no warnings.
How does one get JPEG sequences to import to the queue?
Please advise.
-Travis

Yes, import into premiere work fine. The nice part about using AME directly is you don't have to have to create a project or use an old one every time you want to crunch a timelapse. Also, AME has this nice feature where it will autoname the output file IMG[FirstStill]-[LastStill] (ie IMG[GP001234-GP001297]). This was helpful because GoPros change the first number in the sequence every time you stop and start time lapse.

Media Encoder CC 2014 using cached versions of Precomps in AE and Nested Sequences in Premiere?

I'm seeing this weird thing where Media Encoder is using older versions of certain assets when exporting a Premiere Pro CC 2014 sequence. I'm seeing issues with nested sequences...Media Encoder uses an old version of a linked AE comp or it doesn't render a certain video track. With linked AE comps...I'm seeing Media Encoder use an earlier version of a precomp within the main comp.
When I look at the video in the Export Settings dialogue in Media Encoder, the old version of the AE comp shows .
If I look at the Export Settings dialogue in Premiere, it's up to date and looks right.
Anyone dealing with this or found a workaround? Thanks!
Calvin

I don't think I'd call this issue expected behavior...at best it's anticipated behavior that's going wrong. The only reason I wouldn't call it expected behavior is because what I'm seeing is AME reverting to a cached state on a FRESH LOAD of a sequence to render directly from Premiere. Basically, AME isn't open...sequence looks fine in PPro...load into AME via PPro export...look at export settings dialog in AME and note that the sequence is the old/cached version. So, it's not like the export was already in AME and THEN I made changes in PPro. It appears AME might be incorrectly identifying the newly imported sequence for export as an older, cached version.
However, I didn't get a chance to test your original solution so I'll try that the next time I see it happen. I also fixed the issue by clearing out the media cache and databases. NOT an elegant solution at all and TOTAL overkill...but it did work.
Thanks for the links!

ISE 1.2 Patch 2 External RADIUS Server Sequence Broken?

Hi community,
We have upgraded our proof of concept ISE 1.2 lab to Patch level 2.
Our lab design includes the use of external RADIUS servers which we off-load certain authentication rules to.
To ensure resiliency of the external RADIUS service, we have two of these which we add to a RADIUS Server Sequence, the idea being that if the first in the list is unavailable, ISE will try the second and all will be well.
Now this worked for us in testing ISE 1.2, but I have noticed that after the upgrade to Patch 2 ISE is sending the majority RADIUS traffic to the first (failed) external RADIUS server, with only the odd RADIUS Access-Request to thte next in the list.
Anybody else come across this??
All helpful comments rated!
Many thanks, Ash.

I couldn't find any known issues with this feature. Could you please paste the screen shot of external radius sequence and configuration. Also, how are we determing that the first server in the sequence is DEAD?
~BR
Jatin Katyal
**Do rate helpful posts**

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Sequencing Adobe Photoshop CS5 on Windows 7 64bit

Hello
am sequencing the Adobe Photoshop CS5 on Windows 7 64bit build, The installation had ended with Exit Code: 6 - Silent workflow completed with errors.
The error summary log is as shown below
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 3 warning(s)
WARNING: OS requirements not met for {667C8B6C-3EAF-4646-A8EC-D85CCC4D3D84}
WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
ERROR: 548 Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}\_497_ecaa88f7fa0b f610a5a26cf545dcd3aa" to "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 3 The system cannot find the path specified.
ERROR: 548 Command ARKMoveFileCommand failed.
ERROR: 548 Unable to delete file copy at "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 2 The system cannot find the file specified.
ERROR: 548 Error rolling back command ARKMoveFileCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe XMP Panels CS5: Install failed
but when am installing it normally on the same build it installs successfully without any errors.
does any one tried to sequence photoshop CS5 application?
Please suggest your valuable inputs on this?
Regards,
Srikanth

Looks like the first two warnings are security level warnings meaning that your silent install will not grant the correct security level for what ever reason. I suspect it needs admin level maybe?
Here is a link. Read #8 as it has to do with silent installs. The log will give you more hints on what you did wrong.
http://kb2.adobe.com/cps/829/cpsid_82942.html

Trasport Sequence

Similar Messages

Maybe you are looking for