Travel advance multiply by first save

Hi expert..
I have question on travel advance, while make travel request.
when I save it for the 1st time, the number of amount in advance will appear like it is multiply by 100.
but, it only for the first save.
if I saved travel request first, then change it and add advance, the amount is right,
any suggestion to solve this?
thanks so much before.

I try with USD in advance amount,
when I press enter, they will automatically convert into IDR..
then, what next?
thanks

Similar Messages

"Save as project" crashes 100% of the time on first save

Hopefully this is covered somewhere but I couldnt find it.
Every time I try to save a new and unsaved little scetch to my external firewire 800 GlyphQ HD (or anywhere) it allways crashes Logic after the save is done.
I can then restart logic and load the newly saved project that just crashed. And everything within the project is saved just fine and works.
When I just save it from there it doesnt crash. Only the first save crashes it.
Any advice or links to similar post appreciated.
Thanks in advance.

I can't give you a solution, but the things I'd try to troubleshoot:
- Perform all the standard troubleshooting procedures (preferences, new default song, ProAppSupport and so on)
- Try the Save As Project to different drives to see if the behaviour may be drive related
- Trash the Project manager database and rescan everything from scratch
- Remove any replacement RAM if you have any, or at least run a RAM test utility
- Reinstall Logic
...and see if any of that helps or gives you clues as to where the problem might be.

Travel Advance Request Payment

In travel management, my organisation wants to go through the process of travel advance approval and payment before the trip is done. I would need the details of the steps required to
- post the approved request to financial accounting (so there would be a basis for advance payment) before the payment can be done)
- post the travel expenses against the travel request when the trip is completed.
My problem is that the system requires the travel request to be settled before it is transferred to accounting. Settling the travel request means that the travel is completed and that is not what I want to achieve at the travel request stage. Can anyone please urgently help out with this?

Hi Muhammad,
Thank you very much for your help this far. I had done exactly what you stated and now I guess you understand better what my problem is. But where I am having issues is with the financial postings that come as a result of transferring both the travel request and the completed trip to FI.
After the travel request settlement (status: Request approved and Settled)
I did the posting run (status now: Transferred to FI and Settled) - The resulting FI document credits the vendor account and debits the travel advance account. This credit in vendor account is cancelled when I do the FI payment run for the approved advance amount.
This whole process works perfectly and I am okay with the way it works.
My major problem comes when the trip is completed, and I need to post all the travel expenses against that same approved travel request.
After the trip expenses are approved and settled I also do a transfer to FI and this is where the problem comes.
The posting run results to 2 FI documents
- the first reverses the previous posting to the vendor account (debits vendor and credits travel advance accounts)
- the second FI document credits the Accured Travel Expense account (with the total travel expense) and debits the individual travel expense items.
For the Scenario I am using for the travel advance posting - Advance via Financial Accounting - the FI documents that are created when the trip is created and transferred to FI is totally different from what is stated in the scenario.
My expectation is that a single FI document should be created which debits the particular trip expenses and credits both the travel advance and staff (vendor) account depending on whether the advance is more or less than the actual expenses. This is exactly what is depicted in the link you sent for the Advance via Financial Accounting- http://help.sap.com/saphelp_46c/helpdata/en/b6/cda10f49e911d189060000e8322f96/content.htm.
My problem is that this does not work in my case and 2 FI documents are created instead of one. Please is there a way you can help me with this?
Thanks.

Change travel advance

Hi experts..
I want to ask, can we change travel advance after we save the request?
how to change the date? or the amount?
thanks

Thanks it helps to change the amount..
is there any other possible answer?
thanks

Saving a Pages document: when I first save a pages document it saves and I don't know where it goes or what its name is. I want to be asked every time I save a pages document what to name it and where to save it. How do I set this preference?

Saving a Pages document: when I first save a pages document it saves and I don't know where it goes or what its name is. I want to be asked every time I save a pages document what to name it and where to save it. How do I set this preference?

I'll guess that you've used a page layout document & pasting created a text box. You can add more pages & create linked text boxes, but I think you'd be better of using a word processing document. In word processing documents there is a basic text layer & additional pages will be created as needed to fit the text. Take a look at the toolbar of your document. If it says "sections" for the +page icon it's a word processing document, if it says "pages" it's a page layout document.

Safari it will not advance past the first page of a PDF Document

Running Safari 5.1 under Snow Leopard 10.6.8 on a d MacBook Pro when I try to read a PDF document in Safari it will not advance past the first page. I get the first page of the document in the browser window. No navigation in the toolbar, the up, down, right and left arrows do nothing nor does the return/enter key.

If you are using Adobe Acrobat > Apple Safari 5.1 and Adobe Reader/Acrobat Advisory

How do I "save as" after first save?

The "save as" option in the "file" dropdown goes away after the first save. How do I (easily) change the location for the save or the name of the file later on?

Bovie,
Your option to create a duplicate document and save it to a new name and/or location is called Duplicate. This duplicate will be identical to the state of your parent document at the time that you issue the command.
As has always been the case, you can change name and location of a file in the Finder. You can edit the filename and you can drag it to a different folder. Or, you can Duplicate the document, save it where you wish and delete the original, what I would call the hard way.
Jerry

Clear travel advance

Dear Sapgurus,
We have 10 emp.in this one we paid 1000 rs travel advance, i configure special g/l indicator in this one i given travel advance and emp vendors then after emp submit the bill how do i clear the travel advance.
Regards
Reachme

Dear,
You have to post the utilization entry, debiting the crediting the vendor (Invoice), now go to F-44 and clear both the transactions.
Ex: Say you have given for travel 500
Entry has to pass
FB60-Travel Exp ac dr 500
                   To Vendor ac cr 500
F-48-Advance to employee entry
          Vendor a/c dr 500
                      To bank ac cr 500
F-44-Vendor Clearing
           Vendor ac dr 500
                       To Vendor ac cr 500

Travel Advance

Dear All
I have a requirement.
In SAP Travel Management, the standard setting for travel advance is that the amount is an offset to the receipts. For example lets assume that an employee takes an advance of 5000 before travelling. After travelling, while creating the expense report he puts a receipt called HOTEL amounting to 3000 and this expense receipt is "to be reimbursed to the employee".
In this case the simulation shows that the employee has to repay the company 2000 as he had taken 5000 as advance and 3000 he has spent from his pocket.
But what my requirement is, advance should not be an offset to receipts. In this example if the employee takes an advance of 5000 he is not supposed to repay it. Moreover now that he has spent 3000 he should be reimbursed with that also. The simulation should show reimbursement amount 3000.
Can this be achievable by means of any setting?

Hi,
it will be in Expence type setttings
and more over system default functionaliy is that it will deduct Exp from advance amount
so Advance amount pay itthough infotype 14.
Regards
Sri

Travel Advance Posting in Other Currency

Hi All,
While posting Travel Advance in USD , System is taking exchange rate from CURR table. Our requirement is we want to post the Document in USD and also want to take exchange rate from Advance table.
Is there any BADI or Userexit available to change the exchange rate.
Regards,
Kamal

Hi
Check the Accounting Document Type for Travel Advance. You can maintain a different Ex. Rate Type(T003-KURST) for this Document Type in OBA7.
Thanks
Prasad

Workflow not triggering on first save

Hi Experts,
I have a workflow which sends a notification mail to users.
A condition is set in the action profiles to trigger the workflow, once the condition is met, mail will be sent to users.
But,here the issue is workflow is not triggering on first save.Only when i again edit the same page and save it ,workflow is triggering and mail is being sent to users.
Can anyone pls let me know how to fix this ??

Hi,
In transaction SWEC, i changed the setting from Change to Create and tried again but didn work .
Please let me know, any further changes needs to be made.
Regrads,
Ashwini

Travel Advance Special GL Posting-Setting up Posting Key

Dear experts,
I have managed to setup the Travel Advance correctly and also managed to post it which read as posting key 21 and 31.
However, i am not posting it as a Special GL Account as at transaction PRT3, under Group HRR(Postings from Travel Expenses Accounting) as i only have transaction:
HRP with posting key 21 (Credit Memo) and 31 (Invoice)
HRT with posting key 40 (Debit Entry) and 50 (Credit Entry).
How do i post advance with posting key 29 (Special GL Debit)?, as according to the FI consultant i need to configure the Advance posting key as one leg using 29 (Special GL Debit). And which transaction should i use, as from this thread i read that we need to use transaction HRV but however, my screen only have HRP and HRT. Do i have to apply any notes to make the transaction available or is it created elsewhere in FI configuration?
Please help.
Thanking you in advance.

I hope you have got your query answered by now but for the sake of others T code FBKP is used to maintain setting of Special GL

Va02 screen input first save it has to update the data base table

I am working on VA02.
For only one user(delivery block)should be block and when we are changing in sales order document for that user it has to update the VBAK table.
for second save i'm able to updating but i want to update at first save only.
thanks,
sree.

I want to update the DB table VBAK. and the user exit is:
here is my coding: my requirement is to block a field i.e LIFSK in va02 and after saving that and i have checked vbak table then in lifsk the blocked db is updated IN TABLE CONTENTS.LATER IF I SAVE IT ANOTHER TIME WITHOUT ANY MODIFICATIONS THE FIELD IS NOT UPDATED.
now the problem is with updation .i have blocked the field.
Please help me its urgent
FORM USEREXIT_MOVE_FIELD_TO_VBAK.
tables: knkk.
if not vbak-kunnr is initial.
if vbak-auart NE 'ZFD' and
     vbak-auart NE 'ZCR2' and
     vbak-auart NE 'ZRE' and
     vbak-auart NE 'ZSD'.
    select single * from KNKK
      where KUNNR = vbak-kunnr
      and    KKBER = '8000'.
      if sy-subrc = 0.
        clear vbak-LIFSK.
      ENDIF.
      IF NOT SY-UNAME = 'FINCOMM1' AND SY-TCODE = 'VA02'.
          SELECT SINGLE LIFSK FROM VBAK INTO LIFSK1 WHERE VBELN = VBAK-VBELN.
           IF LIFSK1 NE ' '.
              vbak-LIFSK = ' '.
           ELSEif vbak-auart eq 'ZCR2'.
                  vbak-LIFSK = 'Z1'.
              ELSE.
                  vbak-LIFSK = 'Z6'.
           endif.
         if sy-tcode eq 'VA02' . "added on 22/05/2008
        if screen-name = 'VBAK-LIFSK'.
              screen-input = 1.
              modify screen.
              update vbak.
        endif.
ENDIF.
      ENDIF.
endif.
endif.
if sy-tcode eq 'VA02' AND sy-uname NE 'FINCOMM1'. "added on 22/05/2008
        if screen-name = 'VBAK-LIFSK'.
          screen-input = 1.
              modify screen.
              update vbak.
        endif.
endif.
endform.
Thanks,
sri.

Can't open new track unless I first save project?

If I create a new project, then create a new track and hit 'record', I get a prompt window to save the project. It won't allow me to proceed with recording on the track unless I first save the project. It only starting doing this recently. Any ideas what the issue is?

Assuming you're recording audio, there is no issue. This is standard procedure when record-enabling an audio track. If you did not notice this before, perhaps you had already saved your new project prior to recording or you were only working with software instruments or loops.

Why SAP travel advance can't be breakdown??

Hi experts,
as we know, SAP Standard for enter travel advance is just allow us to enter total amount of advance.
my requirement is to breakdown those advance through different expense (that just appear on travel expense transaction)
is there any other way to achieve this?
and if it is not possible by standard,
do anyone can explain and provide detail on why SAP travel advance only provide to enter advance amount only.
thanks in advance.

Hi there
Your quite right, there is no standard functionality to provide breakdown of travel advance, unfortunately I couldnt find any specific reason for this (although as you probably know the advance is also not possible to edit once the travel request is saved so would expect this is a contributing factor and also that advance has to be treated differently to expense type based on its own table T706B1_A) but can only confirm that indeed, this is by design.
Sally

Travel advance multiply by first save

Similar Messages

Maybe you are looking for