Travel allowances for the applicants ?

hi all,
can anyone help me out in
Travel allowances for the applicants ? applicants who attend interview should be give TA. how to config that and whts the infotype and how to connect it payrolls.
its urgent please. points are ready for solutions.
regards,
vikram

I just bought a Gecko Hi Fi Traveler case and it absolutely rocks! Very well made. Here is the link
http://www.geckogear.com.au/productipods/for+ipodhi-fi?pid=1
Alex
G4 2002 Quicksilver 867 mhz 1.12 GB Ram, PB 1.5mhz Mac OS X (10.4.7)

Similar Messages

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service

Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.

Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

No updates allowed for the document "......." IDOC "........"

When trying to access a sales order in change mode... I receive the following error message:
No updates allowed for the document "......." IDOC "........"
I checked IDOC status in WE02 and found that the Application Document was not posted and status is 51. Next to the status of the IDOC "purchase requisition does not exist"
Please Advise..
Thanks
Nick

double click the message and tell the message number

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

There are a variety of well-made sleeves from SF Bags which will accommodate the Smart Cover. I'm partial to the neoprene bags and sleeves from Bult NY and I use this "hoodie" netbook sleeve (in black) for extra protection when I'm traveling or in the field because it has a rigid shell to protect the back and sides:
http://www.builtny.com/hoodie-netbook-case-7-10-inches-prod.html
For everyday, I slip my iPad, with the SmartCover on, into a small neoprene messenger bag, whose 6 pockets hold my iPad, a wireless keyboard (in a sleeve from SF Bags), Kindle, iPad, and cables /chargers:
http://www.builtny.com/neoprene-messenger-bag-11-13-inches-prod.html

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

Inspection RR should be allowed for the operation confirmed qty only

Hi Friends
I have one requirement , Inspection results recording should be allowed for the operation confirmed qty only
i.e
    1. Release Production Order for 100 qty
    2. Inspection Lot created for 100 qty
    3. Production Confirmation done for 1st operation for 50 qty
    4. Next operation is testing or Quality inspection
    5. Used 03 insp type(WIP inspection)
    6. Result Recording should be allowed only for 50 Qty
    7. If i go for 51, system should give message(i.e confirmation not done for 51)
    8. Usage decision saved for 50 qty, Remaining 50 qty,we have to do separate RR & UD once confirmation done
Please let me know the settings,
Thanks & Regards
Gajendranath

Hello Gajendra
Please find my inputs
1) PLease activate in OPK4 for the production order type these 3 setting
a) Operation sequence : Error when operation sequence is not followed
b) Overdelivery : Error when overdelivery tolerance is exceeded
c) Results Rec. (QM) : Error message if no insp. result exists
by doing this a) you make the sequence of operation mandatory. no body can confirm operation no 30 without confirming 10 & 20
b) if you have confirmed 50 in the first operation, you cannot confirm more than 50 in second operation
c) it will not allow you to confirm through C011n if the result recording is not done
2) Kindly understand for 03 inspection the lot quantity will be of 100 (PO quantity as in your case). so it is impossible to give UD for 50 quantity and then do the UD for the rest of the quantity.
UD is for the lot and not for the confirmed quantity. And please note for 03 inspection confirmation holds the importance rather than the UD
So use 03 for intend of its use
Regards
Gajesh

HT1535 Does iTunes 11 allow for the "dragging" and "dropping" of music from a library onto a manually managed device?

It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true? I am trying to drag a playlist onto my iPhone. I've done it many times before on previous versions of iTunes but now that the menu is up in the heading, I can't drag the playlist onto the icon for my iPhone.

Zmaj3 wrote:
It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true?
No.
Sync you are not syncing, the ONLY way to get items onto a manually managed device is to drag and drop.
However, I feel a much simpler way is to create a playlist and add/remove songs from this playlist and autosync this playlist (or multiple playlists). I use about 6 or 7 playlists
You can still also drag & drop songs while autosycning.

Can the next version please allow for the line height to be zero in a text box? I can only go down to .01?

I want to create a flipping calendar. I had this brilliant idea of putting each date 01 02 03, etc in one text box, with a hard return in between, and then set the line height to zero. Then set the type to appear one paragraph at a time. It would eliminate 20 animation steps. It worked beautifully except that I can't get the line height to set to zero. It will only go to .01. Bleh!
So please, Can the next version allow for the line height to be zero in a text box?
Also, separate timelines would be nice instead of one long string so it would be easier to have more than one animation happening at once.
Just a thought.
PS - I also noticed it would be nice to have the option of having the first line in a text box dissappear or dissolve or flip out before the next one comes in, rather than just each building in on top of each other.

In these forums you are just talking to users, not developers. To provide your feedback, in Keynote go to Keynote Menu>Provide Keynote Feedback and send your request that way.

Apple discontinued its iWork Beta trial which allowed for the placement of documents on the web and provide others the ability to read, edit and download no matter their software. Is there a replacement product?

Apple discontinued its iWork Beta trial which allowed for the placement of documents on the web and provide others the ability to read, edit and download no matter their software. Is there a replacement product?

No.

Garageband - does it allow for the use of software like "ILIO Origins for EXS/GIGA?"

I am completely new to the modern world of iOS (just bought a Apple iMac ME089LL/A 27-Inch Desktop), and Garageband, and recording music and such. I've watched enough tutorials now to know that Garageband has virtual instrument libraries. I want to know if Garageband will allow for the use of more sophisticated sounds, specifically those in the ILIO Origins for EXS/GIGA

I am also baffled. I tried to find this "default Captivate quiz" in the help section of Captivate with no results. When I again contacted the representative, he closed the conversation before speaking with me.
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 4 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Khyati'
Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
I have posted the entire correspondence on Adobe Captivate's Facebook page in the hopes that I might get some swift assistance from the company.

Universal Travel Adapter for the Zen Mi

I'm planning on ordering a 6GB white Zen Micro from the Creative store soon and hopefully getting it in time for my trip to Germany and France this July - so I've also been looking at the Uni'versal Travel Adapter in the Creative store also. But I have a few questions about it...
Since the normal power adapter seems to be out of stock for the time being, I was planning on just using the USB charger with my computer to recharge *while I have the player in the US* - which is really no big deal - but does the uni'versal travel adapter offered *need* the "regular" power adapter too, or does it plug straight into the micro and then into the wall without it's
Also, will the uni'versal power adapter work in France and Germany? (I'm pretty sure it will, I'm just asking because I don't want any nasty surprises!)
Thanks for your help, I'm a terrible n00b to the whole mp3 player thing period - but I feel better asking.

The travel adapter doesn't need the other charger also, it's stand-alone.
It will work in France and Germany.
Really all the travel adapter is, is the original adapter with different sockets. If the other adapter were available you can get this and buy a travel socket.

Does the QT MPEG2 upgrade allow for the use of m2t files in FCP?

I just noticed the product the Apple store - and since I'm on the way to return a Firestore FS4..... Will this upgrade allow FCP to edit m2t?

Thanks gents - I heard the same rumor today from Focus' technical support - they are waiting for the QT patch to test and issue a firmware upgrade for the Firestore units, but they didn't expect a solution until April. sigh I had hoped the upgrade was new, and this was the software they were waiting for.

Travel allowances for the applicants ?

Similar Messages

Maybe you are looking for