Travel iViews in ERP 6.0 EHP4

Hello,
Please, we need to use SAP enhancement package 4 for SAP ERP 6.0, Travel management iViews.
EHp4 is installed in portal properly but in ERP 6.0 EHP4 folder (pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder), in folder: Travel expenses(pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.iviews/com.sap.pct.erp.ess.14.travel_expenses) there is just one iVIew for Express expenses: pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.iviews/com.sap.pct.erp.ess.14.travel_expenses/com.sap.pct.erp.ess.14.express_expenses.
Please, do you know where are the other iViews?
We need all Travel management iViews from EHP4 (ERP 6.0)
Thank you&Regards

They come with the business function FIN_TRAVEL* which were delivered with the ABAP functionality in EHP2 (hence why they are that in folder even though relevant for EHP4 etc too!) but also correspond to the business part packages too e.g if you were on EHP5 but had lower level BP of 1.41 you could hit problems.
The homepage framework entries for ABAP should be in table 000 and advisable to copy these for your entries.
E.g. URL of the PCD Pages in the resources
employee_travel_expenses_srv_12 - then the URL of the PCD page must be entered starting with ROLES:// (see note 1629947)
Please note this is essential in order for all navigation to work and is most often the reason for missing buttons/tabs/dead links etc.
The entered URL starting with ROLES:// must EXACTLY point to the the place, where the Iview is located in the portal content directory. If this URL is wrong or even empty it leads to exactly this kind of error: user dependent error messages like "page not found" or just empty screens.
You can check these entries against client 000 and the note 1124849

Similar Messages

Sap E-recruiting ERP 6.0 EHP4 SP4

Hi Experts,
I am new to portal , Recently I deployed Business package E-recruiting ERP 6.0 EHP4 SP4 through SDM, it is seen in portal also and i assigned roles to some users, when users access the application i.e clicks on any iview it gives portal runtime error, i think i have to connect that to back end. How can i connect E-recruiting ERP 6.0 EHP4 SP4 to back end server? Is there any RFC's i have to configure? or Whether i have to create any JCO destinations for that like ESS / MSS package? If so what are those JCO destinations? provide some docs and any useful URL's for that.
Provide any URL's or docs regarding pre-deployment and post-deployment guide for E-recruiting ERP 6.0 EHP4 SP4.
Thanks in advance.
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Nov 18, 2010 11:57 AM
Edited by: pradeep_546 on Nov 18, 2010 12:11 PM
Edited by: pradeep_546 on Nov 18, 2010 12:16 PM

Hi,
business package configuration information is available on SAP Help and on service market place:
http://help.sap.com/erp2005_ehp_04/helpdata/en/b0/8af9114b224e4a9fab63ee633ffe1d/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/en/6e/f8b6cbf17541e592bf7bf27cab5b35/frameset.htm
From the portal side, you'll have to create a portal system that points to your SAP backend, assign alias, check if the BP is using ITS, WDA or WDJ and configure the systems.
br,
Tobias

Compensation Planning iviews in ERP 2004

Hi,
I am using mySAP ERP 2004 60.1 ESS/MSS package on EP 7.0. But its does not contains the compensation planning iviews that was there on the java based ESS/MSS.
Is the compensation planning iviews not supported in ERP 2004.
Any suggestions?
Regards
Debasish

hi, you need installing ERP 6.0 EHP4 for implementing Compensation Planning Iview
The path in the ECC Content for SAP > Line_manager > Manage Self-Service -iViews - Compensations Planning
before you need installing Jco, Sld, for ESS&MSS

New Functionalities on SAP FI side in SAP ERP 6.0 EHP4 & SAP ERP 6.0 EHP5

Hello Team
I am a FI consulant and now i would like to know the functionalities avialable in SAP ERP 6.0 EHP4 and SAP ERP 6.0 EHP5. So i request you to pleasae check and provide me answers to the below points for my understanding
1. What are the new functionalities added in SAP ERP 6.0 EHP4 on SAP FI side.
2. What are the new functionalities added in SAP ERP 6.0 EHP5 on SAP FI side.Finally what is difference between EHP4 and EHP5, i mean in the point of SAP FI functioanliy.
In the meantime, please provide me the links where i can get complete information on the new functionalities added on FI side in these Enhancement Packages (ie 4/5).
Yours answers would help me a lot to understand the concept.
Regards
Sree

Enhancements packages contains tens to hunderds of new or changed functionalites (called business functions). After installing an enhancement package you can activate the business functions which can be usefull to you.
To have an idea which business function can be usefull, you can use the business function prediction. Based on the (FI) transactions you use in the system, it gives an advice which business functions in an enhancement package should be activated.
See http://www.sap.com/solutions/business-suite/erp/enhancement_packages/business-function-prediction.epx
and http://service.sap.com/erp-ehp

SAP ERP 6.0 EHP4 upgrade from SAP R/3 4.7 1.10

Dear Experts,
Our client is going to upgrade current landscape SAP R/3 4.7 1.10 to ERP 6.0 EHP4. The Source system O/s is AIX 5.3 and database is db2 8.1. Client procuring new hardware for the target release ERP 6.0 landscape and the O/s is going to be AIX 7.1 and databse would be db2 9.7 FP3.
As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Thanks and Regards,
Seshu

Seshu Mannepalli wrote:
> As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
>
> Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Hello,
You can go ahead for IMPORT with DB 9.7.
We completed an OS/DB Migration Project (which involves system copy using EXPORT/IMPORT) and we utilized direct newer version of DB2 on the target during IMPORT.
But please confirm whether the kernel of your release would work fine with DB 9.7 or not. Otherwise, there is no problem in going for higher version of DB2 here.
Small question - Why you want to test the Mock Upgrade on DB2 version which is different than the current version on production server ? Or are you planning to upgrade your current DB2 8 to DB2 9.7 BEFORE the SAP Upgrade on all the servers - then the testing is OK I think (however OS is still the different - Or may be you will go for system copies for this too !)
Thanks

SAP ERP 6.0 EHP4 upgrade from R/3 4.7 NUC

We have R/3 System which is 4.7 Non-Unicode. We are not using MDMP and only have single code page. Can I upgrade directly to Non-unicode version of ERP 6.0 EHP4 or do I need to use CU & UC. I read some where that EHP4 cannot be used on Non-Unicode versions.

> 2 years later, we installed EHP4. We are still non-unicode.
If you don't use Portal or other Java application that's fine. As soon as Java comes into place the backend system must be Unicode:
Note 975768 - Deprecation of Java features with non-Unicode Backend
Markus

ERP 6.0 EHP4: productversion/main instance in SMSY ?

I had a problem with MOPZ when searching for the newest HR Supportpackages (LCPs for Germany) for a ERP 6.0 EHP4 system. The SAP-system was part of a logical component Z_CORE... with product version ERP 6.0. (The details below header data showed EHP4 for ERP 6.0, but the leading product version below "installed productversion" was ERP 6.0. So it was only possible to find HR 600 packages but not the correct HR 604 packages.
I deleted the system out of the logical component Z_CORE...and changed the leading productversion to "SAP ERP Enhancementpackage, Productversion EHP4 for SAP ERP 6.0". Afterwards it was necessary to change the main instance from automatic "SAP Integration for SWIFT" to "Central Applications".
Then I created a new logical component Z_CORE...EHP4 with the same productversion and added the <SID>:<clnt> to the log. component. Then I added my new component Z_CORE...EHP4 to the solution and then I was able to select the files manually in MOPZ:
productversion "EHP4 for ERP 6.0"
SID= <SID>
Button "Select files for EHP4 for SAP ERP 6.0"
Entry by Component
Human Capital Mgmt
SAP HR 6.04 etc.
Several questions:
1) In one note I found that even with EHP4, the product in SMSY should be "ERP 6.0" , but that does not work. Any experiences ?
2) Why is the main instance after changing the leading product "SAP Integration for SWIFT" ? Make no sense for me....
3) What is the difference between
a) SAP ERP Enhancementpackage /EHP4 for SAP ERP 6.0/NW 7.01
b) SAP ERP Enhancementpackage /EHP4 for SAP ERP 6.0
4) I am bit unsure if it it also necessary to select "Human Capital Management" as additional instance (in addition to the "Central Applications" which is the LEADING main instance.
SAP seems to use the same name in different terms . When upgrading to ERP 6.0 EHP4, it was not necessary to select technical usage "Human Capital Mgmt" because it is included in "Central Appplications", but in marketplace the SPs could not be found below "Central Applications" but only below "Human Capital Mgmt".
5) Freshly after upgrade, I started data transfer from SLD. Then as product/instance ECC VPACK was generated and I had to change it manually to ERP (which now turned to be wrong). Looks like the solman sometimes has strange ideas... ?
Best regards
Uta

Hi Sunny,
o.k. I found in the guide:
You can choose one of the following two product versions for SAP enhancement package 4:
- EHP 4 for SAP ERP 6.0
o Use this product version for ABAP-only systems and if you do not want to update your connected Portal or BI to 7.01.
- EHP 4 for SAP ERP 6.0 / NW 7.01
o Use this option for dual-stack systems.
o Use this option if you want to update your Portal or your BI system to 7.01.
So, the know the difference now.
For Productversion:
The MOPZ with product version ERP 6.0 didn't work: packages couldn't be find through MOPZ, so the information from the guide
Even if you already have installed SAP enhancement packages, register the system as a regular SAP ERP 6.0 system! Also, make sure that your system is not registered as an SAP ECC 6.0 system!
seems to be wrong or maybe this is only valid for a system which will be brought to EHP4 afterwards.
Regards,
Uta
Edited by: Uta Hedemann on Dec 22, 2009 4:44 PM
Edited by: Uta Hedemann on Dec 22, 2009 4:55 PM

Installation ERP 6.0 EHP4 on MSCS windows 2008 - oracle 10

Hi,
I'm installing an ERP 6.0 EHP4 on platform windows 2008 - oracle 10 with MSCS.
Cluster is configure as described in SAP installation manual.
Network configuration is set up as described in SAP installation manual.
During step --> First MSCS Node (7.3.5 Configuring the First MSCS Node) sapinst got an error before end of input parameters.
In other forum I've found to check MSCS network configuration, but it seems OK.
Any idea ?
Thanks.
Maurizio Manera
TRACE 2010-02-19 16:36:03.878
Call block:CollectClusterParameters_windows_ind_ind_ind
 function:CollectClusterParameters_windows_ind_ind_ind_DialogPhase_dGetSAPClusterParameters
is validator: false
TRACE 2010-02-19 16:36:03.878 [syxxcnamrs.cpp:278]
 PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const
IP name gnutti-sapgr resolves to IP address(es): 192.168.0.133
TRACE 2010-02-19 16:36:03.878
Function setMessageIdOfExceptionMessage: modlib.jslib.invalidIPAddressNumber
WARNING[E] 2010-02-19 16:36:03.878
 CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-02-19 16:36:03.878 [iaxxejsbas.hpp:488]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-02-19 16:36:03.893 [sixxcstepexecute.cpp:977]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-02-19 16:36:03.893
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2010-02-19 16:36:03.909 [iaxxgenimp.cpp:712]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP > First MSCS Node. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/ORA/SYSTEM/HA/AS-ABAP/MSCS-A.
TRACE 2010-02-19 16:36:03.909 [iaxxgenimp.cpp:1257]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI

Edited by: Eric Brunelle to delete html tag on Feb 19, 2010 1:47 PM

Hi,
my SAP system is 7.01 kernel based so I can't apply control.xml of "Note 1249469 - SAP NetWeaver Based On Kernel 7.11: Windows".
I've just download new control.xml file attached to "Note 1326698 - SAP NetWeaver 7.01 SR1/Business Suite 7 SR1: Windows" but error still remains.
So I've compared the two control.xml files in corrispondence of function IPAddress(adr), where the error "modlib.jslib.invalidIPAddressNumber" is returned.
The difference between files are reported below (first control.xml for kernl 701 and before control.xml files for kernel 7.11).
I've noticed that in my control.xml files is missing the following code:
 while (num < 0) {
 num += 0x100000000;
For a test I've tried to modify my control.xml files adding this code and there is no error; I can see "Parameter Summary" of sapinst program. Now I can go on with installation, clicking on next.
Now I've to decide if going on with installation or opening a support message to SAP Support for validating this solution.
What do you think about this ?
Bye
Maurizio
7.01 - control.xml
 Trace("IPAddress", "IPAddress(number ", adr, ")");
 var num = Number(adr);
 if (isNaN(num) || num > 0xFFFFFFFF || num < 0) {
 throw new Exception("modlib.jslib.invalidIPAddressNumber", "0x" + num.toString(16));
 this._adr = Number(adr);
7.11 - control.xml
 Trace("IPAddress", "IPAddress(number ", adr, ")");
 var num = Number(adr);
 while (num < 0) {
 num += 0x100000000;
 if (isNaN(num) || num > 0xFFFFFFFF || num < 0) {
 throw new Exception("modlib.jslib.invalidIPAddressNumber", "0x" + num.toString(16));
 this._adr = num;

ERP 6.0 EHP4 SR1 Upgrade Unix Oracle issue with /STARTUP

We are in the process of doing an ERP 6.0 EHP4 SR1 Upgrade Unix Oracle Upgrade. We have ran into a problem running the /STARTUP, we are using the Upgrade Master DVD 51036889 as well as have down loaded it from service market place and jce_policy-1_5_0.zip as well as the one on SAP service market place. When we execute the command /STARTUP jce_policy_zip=jce_policy-1_5_0.zip the job starts and runs down to where the controller for port 4241 starts and then hangs. If we control C out and go to the /usr/sap/SID/upg and run /STARTUP it runs all the way through setting up both 4241 controller and 4239 controller, we then go to the web browser and launch the Gui => logon as administrator => upgrade roadmap screen pops up it is set on the initialization phase we hit next and nothing happens after that, we don't get the ABAP tab or the progress bar. We would appreciate any help.

Hi Jerry,
The first time you run STARTUP its run from the NW7 EHP1 SR1 DVD. Just wanted to confirm that your running it from this DVD. This extracts and setups your /usr/sap/<SID>/upg directory. It sounds like this directory hasn't been setup correctly which is why your not seeing anything when you login to the GUI.
Can you confirm that you got your JCE files from SWDC -> SAP Cryptograpic Software ?
OSS Note - 1240081
http://service.sap.com/swdc > Download > SAP Cryptographic Software
I had to use the JCE file from here to get my upgrade to work. What OS are you on?
Hope this helps.
Cheng

Can't find upgrade master dvd for ERP 6.0 EHP4 !

Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4 (windows/oracle) ? Does anybody knows the right materialnumber?
My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
I looked into download area service.sap.com/swdc:
My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
but there are only upgrade export dvs, language dvd, etc, but NO Upgrade master dvd, too!!!
Kind Regards,
Uta

Dear Ute,
i use this one "Number 51036889"
it is the Upgrade Master from NW701 which is also for EHP4.
Its located under the EHP1 Tree:
Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
hope this helps
Regards
Bjoern

SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.

Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Best Practise on SAP ERP 6.0 EHP4

Hi Tech gurus!
I'm Luckshmanan from Bangalore,India.
We installed SAP ERP 6.0 EHP4. Now, we need to install the Best practice in the same system.
How to do that?
With regards,
Luckshmanan.

Hi Luckshmanan,
You can install Best Practise addon BP-ERP 604V2 on your SAP ERP 6.0 EHP4 system as per note 1425037.
BTW, the latest version BP-ERP 604V3 is to be released in June 2010. Maybe you can wait until BP-ERP 604V3 is released.
With Best Regards
Julia Song

Support packages selection for erp 6.0 ehp4

Hi
We have solution manger ehp1 and upgraded erp 6.0 ready1 to ehp4 . I included the erp system in SMSY soltion manager
I am not able select the erp 6.0 support packages in solution manager still it is connecting to ecc 6.0 support packages
can any body give the solution for selecting the support packages/stacks from solution manager for erp 6.0 ehp4 system.
thanks alot

hi,
I upgraded the solution manger from 7.0 to ehp1 and my ST-400 patch is 21.
I am not getting any error messages .
I upgraded my r/3 system also to ERP 6.0 ehp4.
I am trying to select the support packages through solution manager optimizer i get the screen like
. maintenance
. Enhancement package Installation
if i select maintenace
i can see all the ecc 6.0 support pakages only with sap_basis 700 but i already upgraed to sap_basis 701
i am not able to see ERP 6.0 EHP4 support packages
or if i select Enhanve package installtion also i am getting only asjava support packages but we have only ASABAP only.
please clarify this
thanks alot

How to install ERP 6.0 EHP4

Hi gurus, I want to install a fresh new ERP6.0 system in my company. Since there is EHP4 out in the market then i want to install that version. I have read through the EHP erp 6.0 master guide and relevant document but it's seems to be not clear how to directly install the EHP4. I want to install a Java+Abab system with EP,BI and EPCore.
I've downloaded the Installation Master for 7.01 SR1. I've choose the *Sap ERP 6.0 EHP4 Ready u2013 Support Release 1* to install. But there is no option to Install Dual Stack which is Java+ ABAB at once. The option available is only Abap separately and Java separately which u cant install two instance with the same SID. How do i solve this issue. Is there another way to install the EHP4. If do please guide me through. I'm very confuse.

Hi,
Not necessarily two servers. If it is a development or testing system and if the server has sufficient resources to handle two instances then you can install those separate instances one for ABAP and one for JAVA in single server.
If it is production environment and planning for MSCS, then better to install in separate servers.
Thanks & Regards,
Sharath

Install SAP ERP 6.0 EHP4 Appl Srv FJS-00003 and FCO-00011 Error

Hello to all
i will Install an Linux Appl Srv (SLES 10 SP3) for our Windows 2003 x64/Oracle 10.2.0.4 SAP ERP 6.0 EHP4 Central Instance but i get the following errors
ERROR 2010-10-28 11:35:47.149 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
ERROR 2010-10-28 11:35:48.796 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
i have found some Instruction to set JAVA_HOME, SAPINST_JRE_HOME .. but his not helps.
Here the System Settings
SUSE SLES 10 SP3
InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM
NW_7.01_SR1_Kernel_Linux__OS_400
ORACLE 10.2 64-BIT / ORACLE 10.2 32-Bit / Client / Number 51033272
sap-locale-1.0-25.7.1.x86_64.rpm
sapinit-3.0-1.13.1.x86_64.rpm
saplocales-2.4-4.x86_64.rpm
sapinst stared as root
profile and global directory from windows mounted to /sapmnt/E12/
cat /etc/profile.d/alljava.sh
export JAVA_HOME=/opt/j2sdk1.4.2_19
export JDK_HOME=/opt/j2sdk1.4.2_19
export SDK_HOME=/opt/j2sdk1.4.2_19
export JRE_HOME=/opt/j2sdk1.4.2_19
export SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
export JAVA_BINDIR=$JAVA_HOME/bin
export PATH=$PATH:$JAVA_HOME/bin
cat /etc/profile.d/alljava.csh
setenv JAVA_HOME /opt/j2sdk1.4.2_19
setenv JDK_HOME /opt/j2sdk1.4.2_19
setenv SDK_HOME /opt/j2sdk1.4.2_19
setenv JRE_HOME /opt/j2sdk1.4.2_19
setenv SAPINST_JRE_HOME /opt/j2sdk1.4.2_19
setenv JAVA_BINDIR $/bin
setenv PATH $:$/bin
export tels me
declare -x JAVA_BINDIR="/opt/j2sdk1.4.2_19/bin"
declare -x JAVA_HOME="/opt/j2sdk1.4.2_19"
declare -x JDK_HOME="/opt/j2sdk1.4.2_19"
declare -x JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x PATH="/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin"
declare -x SAPINST_JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x SDK_HOME="/opt/j2sdk1.4.2_19"
setenv tels me
JRE_HOME=/opt/j2sdk1.4.2_19
SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
JAVA_BINDIR=/opt/j2sdk1.4.2_19/bin
PATH=/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/bin/X11:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
JAVA_HOME=/opt/j2sdk1.4.2_19
SDK_HOME=/opt/j2sdk1.4.2_19
java -version
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
i hope somebody can help me
best regards
Oliver
Edited by: Oliver Fischer on Oct 28, 2010 12:09 PM

Hello Markus
here the last lines
ERROR 2010-10-28 14:27:11.986 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
TRACE 2010-10-28 14:27:12.435 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 12509
TRACE 2010-10-28 14:27:12.584 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 12510
ERROR 2010-10-28 14:27:13.283 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > Application Server > Oracle > Dialog Instance( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/LM/AS/ORA/DI. </body></html>
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Oliver

Travel iViews in ERP 6.0 EHP4

Similar Messages

Maybe you are looking for