Travel Mexico template (32)

Hi Travel experts with Mexico background,
Iu2019m not sure if you could help us on the travel expense country template for Mexico. We identified two gaps where hope to get some more insides from you.
This question ralates to travel expense and not planning.
1)  According to our tax department within the company it is legally required to store for each expense item you declare in you expense declaration the vendor information as long it is a trip with in the country (Mexico). This vendor information contains as well the RFC (it is the tax ID belonging to this vendor) it is equal to our German u201CSteuernummeru201D. Actually we canu2019t find any information about this if the Mexico version has this capability. (My feeling is that this is not available) .
Further this information is requested to be reportable on a consolidated way to answer how many money has employees/ the hole company spend on vendor A, vendor B etc.
This seems to be a legal requirement by the tax authority since last year.
2) Further it needs to be a flag available on expense type level if a tax is retrievable by the company from the tax authority based on the information if it was spend with in a home zone of 30 miles. So the employee has to specify if the spending was with in a zone of 39 miles around his office.
As both requirements are legal demands from the government I would expect that this is covered in the Mexico country template(32).
But I haven't found anything about.
Do you have any insides about SAP's plans? Maybe you have implemented this on a customer solution. Or you could  confirm that capability and that it is covered in the country template of Mexico.
best regards
Hans Georg

Hello Hans,
I am just trying to think about potential workarounds...
1. You got the field Service Provider at the level of expense line item, so it can cover different vendors (even though there is no system link with a real vendor)
2. If by chance you do not use Regions within country, you can set up 2 regions (also at expense item level).
Next you make these fields mandatory and can build queries.
Good luck,
Paulo

Similar Messages

  • Can't open 1 document created using travel journal template

    Since installing Snow Leopard yesterday I found out I can't open this one file I created using the travel journal template. All other Pages '09 files are fine. I just get this error message telling me Pages had to close my document "unexpectedly".
    *"Pages quit unexpectedly while using the SFWordProcessing plug-in"*
    Don't see why it would need to use this plug-in. And I don't recall choosing this plug-in. There must be a way around this. To open this file by turning off that plug-in perhaps. Unless it's absolutely necessary when using the templates. Or the "travel journal" template.

    http://discussions.apple.com/thread.jspa?threadID=2141021&tstart=15

  • Change logo in Travel Express template????

    Hello,
    Does anyone know how to change the logo in the "Travel Express" template.
    The main template loads the "header" template and teh header template loads a module inside settings
    called "logo".  This file however is not editable and therefore theres no way to change the logo.
    Any help is appreciated.

    Hello Rama,
                       If it is ABAP Adobe forms you can change the logo in transaction SFP. If it is Java Webdynpro form then you need to use the NWDI to do that.
    Thanks,
    Greetson

  • How to get text flow onto the next page from template "travel journal"?

    When wanting to create a new document, I chose "Travel journal" between "side layouts" in templates. When it opens, you see one page with pictures and example of text.
    When I start to write my text in the text field, it disappears when I get to the end of the page.
    What do I do to have the text move/flow to the next page automatically?

    The "Travel Journal" template is a page layout document & uses text boxes. There is no default flow to another page. You need to insert a new page & then create a linked text box. You can link existing text boxes or create a new text box linked to an existing one. Click the linking triangle then click to create a new box or click an existing box to link to it.

  • Nd suggestion for importing Word doc into Pages template....

    I have a rather lengthy Word file that I want to import into Pages using one of its templates (Travel Journal). Is there a way to import the Word file directly into this template?
    I know you can import a Word doc into Pages but once you do that, you have to do the designing from scratch (or at least that what it looks like you have to do).
    I like the Travel Journal template and wanted to use that for my Word doc. Any suggestions for getting my Word doc into this template, without having to cut and paste each section?
    I like the template because of the varied page layout options and I don't want to have to recreate from scratch!
    Help!

    Hello Debbie,
    as I know there is no way to get what you want. I think you have to load the Word document into Pages and than you have to copy and paste all the text and media objects into the Pages template.

  • Can I change font on slideshows?

    I have been using the default Travel slideshow template for throwing up photos.
    The problem is that in the slideshow viewer, the text is pretty much illegibly small. I just want to make the size larger. The slideshow seems to have it's own setting for fonts since the font and size are totally different from on the actual page itself.
    I know that if I hit Shift-cmd-+ it makes the font bigger, but it's tough to explain that to everyone, windows and mac, etc.
    If there's anyway to change that I'd love to know.
    many thanks
    enzosf

    Enzo,
    I assume you are talking about font size for the caption in the default, non-.Mac SlideShow, and not the captions in the Travel Photos template. To change the font size of the default non-.Mac SlideShow, after you publish your site from iWeb to a folder, you must open the "SlideShow.html" page, which is in the "SlideShow_assets" folder, using a text editor. If you use TextEdit, open up the TextEdit Preferences window (from the TextEdit menu), then click on "Open and Save" and make sure to check the "Ignore rich text commands in HTML files" button; also go down to the selection option menu of "Opening files:" which is right under "Plain text file encoding" and change it from "Automatic" to "Unicode (UTF-8)"; you should probably do that also for the "Saving files:" part too.
    Now, with the SlideShow.html page opened in TextEdit, you will see the following at the top of the html code, right after the line with the page title:
    < style type="text/css">
    .caption {text-align:center;color:black;font-size:10px;font-family:helvetica,sans-serif;font-weight:bold;}
    You can change the font size here (I marked it in bold italics above), I find changing it to "font-size:18px;" works well.
    Hope that helps,
    Bob
    20" iMac G5   Mac OS X (10.4.7)   1.8 GHz PowerPC G5; 1 GB RAM & 15" 2.16 GHz MacBook Pro

  • Formatting a column in numbers

    I am using the travel planning template in numbers. I tried to enter a 10 digit confirmation number but it is being displayed in a format similar to scientific notation. I tried adjusting the column width. Can anyone please tell me how to adjust the formatting to allow for this type of a data format?
    I am using a new macbook with mac os x 10.5.4

    We may add the ZERO WIDTH NO-BREAK SPACE ($FEFF) at the end of the "number" so, it will keep its leading zeroes and don't be displayed in scientific format.
    Yvan KOENIG (from FRANCE lundi 14 juillet 2008 11:17:33)

  • Can't find heading on blog page to delete...

    Hello, working on a web page for my church. I used one of the "my travel" blog templates for our Pastor's Blog site. However, when you click the RSS button it takes you to the page to subscribe. At the top of that page is still says, "My Travels" I can't find it in IWeb to Delete. Any Suggestions? Here is the link.
    feed://www.nwbcardmore.com/NWBC/Pastors_Page/rss.xml
    http://www.nwbcardmore.com/NWBC/PastorsPage/PastorsPage.html

    The only place I see "my travels" is in a text box on the main blog page in Iweb to the right of the first photo in the template.

  • How can I get PE8 titles into PE11 (ie. topo_title)

    I was previously using PE 8.  Under edit, titles, travel, I liked the "titles" world travel and topo.
    I upgraded to PE 11 and do not see those particular titles in PE 11.
    Is there a way to export them from PE 8, to PE 11 or download them from a web site?

    amaisan
    I got it to work. Here is the story.
    Unlike the other title templates in the Travel Folder that work, the topo and world travel choices require assets from TWO locations. And, the other key is that Photoshop Elements 11 and Premiere Elements 11 do not appear to support .tga, the type used in version 8.0/8.0.1 for the backgrounds of topo and world travel title templates.
    1. Where ALL the assets for the Premiere Elements 8.0/8.0.1 topo and world travel title templates can be found:
    TEXT AND SUCH
    Local Disk C
    Program Files (x86)
    Adobe
    Premiere Elements 8.0
    Presets
    and in the Presets Folder are the Template Folder and the Texture Folder.  The Premiere Elements 8.0/8.0.1 .prtl files involved are in the Template Folder. The files used for the backgrounds of topo and world travel are found in the Texture Folder which is in the Common Folder and exist there as .tga files. So after Presets Folder in this path to the .tga files...
    Presets Folder then...
    Texture Folder
    Common Folder
    and in the Common Folder are the .tga files needed for topo and world travel title templates.
    As a reminder to both of us, after Presets Folder the path to the .prtl files for topo and world travel is
    Presets Folder then...
    Templates Folder
    Common Folder
    Travel Folder
    and in the Travel Folder are the Topo and World Travel Folders.
    the involved .tga files include:
    topo_bkgd.tga
    topo_bkdg2.tga
    topo_frame.tga
    topo_lower3rd.tga
    World Travel Frame_7.tga
    World Travel Title Bkgd_7.tga
    Besides what I described previously, in order to get those title templates (topo and world travel) intact in Premiere Elements 11 for use in its workspace:
    (a) In the Presets Folder create a Texture Folder and place the .png versions of the .tga files in the Common Folder that you created in the Texture Folder (see below)
    Remember Premiere Elements 11 does not have a Texture Folder that is why you are creating it and the Common Folder in it.
    Local Disk C
    Program Files
    Adobe
    Premiere Elements 11
    Presets
    At this point, in the Presets Folder, you create a Texture Folder and create in the Texture Folder a Common Folder. In that Common Folder go the all the .png version of the .tga (see above list).
    I only placed two world travel files so far...it looks like this path-wise
    How To Convert .tga to .png
    I cannot convert .tga to .png in Photoshop Elements, but I can in Photoshop, CS2 at least. I went with .png since it seemed the most likely to work if it was going to work at all. The lesser of my choices was a .psd file. I need to go this route since simply renaming the file extension from .tga to .png did not work. And, I find that neither Photoshop Elements 11 nor Premiere Elements 11 support .tga.
    Please give this a try. As I said, looks like a by design rather than a bug.
    Thanks.
    ATR
    Post has been edited for clarification and correction purposes. These adjustments are reflected by the underlined text.

  • Backgrounds and iWeb

    I've been working on a website for a friend of mine using iWeb, and I've got to say, it makes my life a whole lot easier.
    The Travel template almost perfectly for me. There was only one thing that got in my way. The background. If you take a look at it, it's parchment colored and has the image of a statue of a cupid angel with a real low opacity.
    Anyhow, that seriously conflicted with my dreams and visions for this site. I've tried almost everything to get rid of that background and replace it with one that I made that looks almost identical.
    (If you want to know, the only difference is that there is a sketch of ship with a real low opacity over that striped, parchment-colored background.)
    My question is, how in the world do I get rid of the original template's background? I tried the conventional Inspector>Page>Page Background>Image Fill, but for some reason, that isn't doing it.
    Help!
    iMac G5   Mac OS X (10.4.7)   1GB of RAM

    Welcome to the discussions, Scribe.
    I can tell you where to go to get at the pesky file (that I can't figure out a GUI way to remove). That file is named cherub_overlay65.jpg. It's INSIDE your iWeb application, so for protection, right-click on the iWeb icon and choose Duplicate. This way, if something goes wrong, you can start again from the beginning (you can drag and drop it on your desktop or just leave it there, as long as you don't make any changes to that backup).
    Now, right-click on the iWeb.app and choose "Show Package Contents". Then double click on the Contentes folder, then the Resources folder, then the Shared folder and you'll see a lot of items there with .webtemplate extensions. If you want to change the background on, say, the Travel Movie page, Right-click on Travel Movie.webtemplate and choose "Show Package Contents". You'll find your target file in that folder.
    Now, take the image you want to use, copy it into that folder, rename the file that's already there by adding "_old" or something like that, and change the name of your image to cherub_overlay65.jpg. The next page you create with the Travel Movie template will have that background. (You may want to save off that copy of iWeb in a folder with their name on it as well, this way you won't have to redo this step if you want to create a site WITH the original imagery and some other point)
    Makes sense?

  • New entry Blog page help

    I use the "travel" blog template ( because i like the page arrangement), have changed the background & browser background to my own image and color, but cannot for the life of me figure out how to make it my template for future entries. I'm so tired of having to start from scratch with "the world of Kevin" style for each new entry. Any help is greatly appreciated.
    Kat

    Try asking this question in the iWeb forum:
    http://discussions.apple.com/category.jspa?categoryID=188

  • Still image disappears from menu background on burning to DVD

    I’ve just completed a project in Adobe Premiere Elements 9 in which I’ve personalized the menu background with a still image (trying two different disc menu templates - sport swimming and one under memories - can't remember the name of that one). With both these templates the still image shows up perfectly on my computer screen while I'm in the project but when I burn the project to DVD the still image doesn't appear on playback of the DVD.  I have done other projects in PE9 with no problems with still images in existing disc menu templates - travel ship template and the template that comes as standard with PE9 before adding additional templates). I would prefer not to use either of these templates for my current project.
    I see previous treads have commented on changing the size of the image...this doesn't seem to make a difference for me and the other suggestion is to somehow change the name of the file for the templates to get around this problem but i'm not understanding this.  I still don't understand why some templates work and others don't. Does anyone have a simple to understand solution to this?
    Or does anyone have a list of the disc menu templates that work with personalizing?
    thanks heaps.

    There does seem to be a bug that affects some menu templates.
    Try the Generic template under the General tab.
    There are also a number of menu templates available at Premiere Elements support site http://Muvipix.com that will work with no problem and can be easily customized.

  • I'm traveling to Mexico, do I have to change any settings to maintain cellualar connnectivity?

    I am traveling to Mexico, do I have to change any settings on my IPAD to continue to receive cellular connectivity?

    You'll either have to set up International Data Roaming with your cell provider, assuming they have parner networks in Mexico, or find a cell provider in Mexico that offers suitable service and get an appropriate SIM from them.
    Regards.

  • Over the next few weeks I will travelling in Mexico and driving in Mexico, how well does the ipad Mpa program run down there and does the device incur any additional charges ?

    Over the next few weeks we will be travelling in Mexico and hoefully using the iPad Maps for driving instructions etc. Does anyone have any experience with this feature? What can of challenges will we face?

    How to turn your computer into a Virtual (Personal)Router.
    Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
    I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
    I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
    What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

  • Country Template Mexico

    Hi,
    Can you tell me the differences between the two standard country templates from Mexico, that SAP supports: MX01 and MX03?
    Thanks in advance,
    Andreia Tiago

    Hello Hans,
    I am just trying to think about potential workarounds...
    1. You got the field Service Provider at the level of expense line item, so it can cover different vendors (even though there is no system link with a real vendor)
    2. If by chance you do not use Regions within country, you can set up 2 regions (also at expense item level).
    Next you make these fields mandatory and can build queries.
    Good luck,
    Paulo

Maybe you are looking for