Traveling Abroad, I Restored Iphone4sVerizon and now it No Longer works Itunes says

Hello I am Traveling abroad and Currently i am in Turkey do to a mishap I had to restore my Iphone 4s Verizon which had been working fine the day before. So I restored it and now when I plug it into Itunes it says that the number is N/A and the phone tells me I have no service. So I called verizon and they told me that the phone was activated. So I tried to make a call and it called but it can not send a text or use any data which is strange cause it could yesterday. When I power on the phone it tells me to wait for Activation and that it may take some time its been a day now and nothing has happened. I really need this to start working. I called verizon and they told me just to reset the phone which I had already tried and it was no help. I am in desperate need of help and any advice will help. I do have a international plan.
Thank You Very MUch

Try these steps
iOS: Troubleshooting carrier activation issues
http://support.apple.com/kb/TS3424

Similar Messages

  • Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize. WHAT CAN I DO

    Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize it. WHAT CAN I DO?

    OMG!!! NEVER MIND, I JUST DID IIIITTTTT!!!! YAYYYYYY!!!

  • How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car

    How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car.

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
    You may leave comments at Apple Feedback.

  • My father gave me his 1st generation ipad.  He restored settings and now I can't get itunes back on it.  HELP!!!!

    My Father gave me his 1st generation ipad.  He reset all setting back to factory and now I can't load itunes.  I have plugged it into two different computers and I can't get it to work.  HELP!!

    You can't delete iTunes. The preinstalled apps cannot be deleted or installed again. It's there somewhere.
    Swipe from screen to screen to look for it.
    Check Settings>General>Restrictions and make sure that you didn't disable it.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

  • I reset my itouch and now it no longer works

    I reset my iTouch and now all that shows up on the screen is a cord pointing to iTunes.  Help!

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software

  • Switched networks, then back and now bonjour no longer works

    I was testing my neighbors network then i switched back and now my 2 PCs can no longer connect to the printer through bonjour. I ran the bonjour printer utility and it sees the printer on both, but then as it is connecting it says "you do not have sufficient access to your computer to connect to the selected printer" ive tried everything i can think of, i cant get it to wok on either network, and it used to work on mine. Each time it sees it there but gives the same error. I even tried changing the network name and doing it all over agian like the first day i connected them. I can see my shared folders and access files both form the PCs and the Mac. Its only the printers. HELP!!!

    Hi abstractls,
    You may be having the same problem as me. If the Airport Express is NOT connected to the internet, the Macs will still work, but the PC print routines say "you do not have sufficient access to your computer to connect to the selected printer" or just "An unknown error occurred during printing". If you reconnect the internet, the problem goes away.
    I suspect that the PC is not getting an IP address assigned to it by the Airport Express, and cannot cope without it, but the Mac is OK.
    My problem is that I do not want to connect the Airport Express to the net, I just want it to share a printer between Macs and PC. Does anyone know of a fix for that problem? I have told the Airport Express to ignore the lack of an internet connection, but that just switches off the amber light...

  • I have just updated to OS X Maverick and now iPhoto doesn't work it says this version of iPhoto can't be used. What do i need to do to get my photos back?

    I have just updated to OS X Maverick and now my IPHOTO Version 9.2.3 doesnt work. How do i get my photos back?
    Any help much appreciated as i'm not a computer person.

    https://discussions.apple.com/message/25167542#25167542
    Best.

  • I haven't had service on my phone all day so my mother suggested i restart/restore it and now it won't work at all. How can i get it working again?

    now that i am trying to restore it, it wont connect to my itunes and it is connecting to WIFI but it wont work still.

    If you are using a computer with Windows: http://support.apple.com/kb/TS1814
    Also to get the iPhone to restore: http://support.apple.com/kb/HHT1808

  • Restored phone, and now i get an error message saying "itunes cannot connect to this iphone" error code: 0xE800000A

    so i restored my phone and updated to ios 6, but now my itunes isnt recognizing my phone, and all of my contacts/pictures/messages etc are gone. please help. i'm having so many problems with this update, and i've never had a problem with an apple product yet.

    Is your iPhone turned on or off? Are you still able to use it? If yes, sync everything to your iCloud so everything is saved. The following steps/suggestion will delete all your data so it is important to sync everything to your iCloud or iTunes:
    Again, WARNING: This will restore the iPhone to factory setting.
    Connect your iPhone to your computer and launch iTunes, turn your iPhone off (hold down power button), hold down power button (on top) while holding the home button (middle button/the only button on the iPhone) for 10 seconds. After 10 seconds, release ONLY the power button (on top) while continuing to hold down the home button (middle button/the only button on the iPhone) until a message appears in iTunes.
    Then you can try updating yout iPhone again..
    I hope this helps! Good luck.

  • I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

    I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

    Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

  • I restored my itunes and now it wont sync back. it says a unknown error has occured (14) please help!!!!

    My ipod was acting up, it wouldnt sync any new songs purchased after i updated my itunes. So i thought okay i will restore it, and sync everything back, so i restored it and now it tries until a message saying 'The ipod 'IPOD' could not be restored. An unknown error occurred. (14)'
    I have tried to sync the same library onto an older ipod and the same thing has occurred.
    Please help i dont like not have my music!!!!!!!
    Thanks.

    Sure it will.
    What happens when you connect your device and try to sync?

  • Updated iPad and now bookmarks don't work  says address invalid

    Updated iPad and now bookmarks don't work         Safari says address invalid for the bookmark symbol

    Clear Safari. Close Safari. Reset your iPad.
    Go to Settings>Safari>Clear Cookies and Data.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Safari app then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it  doesnt show up on my computer

    i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it  doesnt show up on my computer

    Hi there starbaeza,
    You may find the information in the article below helpful.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    -Griff W. 

  • I just recently upgraded from a 4S to a 5C.  I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup.  Why is it doing this.  I did it twice yesterday.....

    I just recently upgraded from a 4S to a 5C.  I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup.  Why is it doing this.  I did it twice yesterday.....  In addtion, those are the only options I have.  I cannot do anything else unless I choose one of the two.  Zero options.  Phone works fine though.

    I figure that either of those options will result in losing all SMS and data created since the last backup. Not a major loss, but ** annoying when nothing has changed and the time it will take to restore.
    When was the last time you synced your iPhone with iTunes since the backup is updated as the first step during the sync process?
    Is there anyway to recover this WITHOUT having to do a full restore or set up as new?
    In a word, no.
    If I do restore or set up as new, how do I know it's not going to do the same thing tomorrow (like a few other forums threads I've read indicate might happen)?
    There is no way to know for certain but I've never experienced the same in the first place. I venture to say having to do this is the exception rather than the rule.

  • HT201328 i have restored my iphone and now i get a message that says activation error. what can i do?

    can anyone help with a question regarding my iphone. I have unlocked and restored my phone as suggested and now I get a message that says activation error. I am unable to do anything with my iphone

    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

Maybe you are looking for

  • Error while importing on local files/queries from Sap Portal EP6

    Hi, When i try to import a file from sap portal to the local PC, I get a screen with the header "Enter Some File attributes". Text displayed in the screen is "Please wait. You will be forwarded automatically. This page had to be included for technica

  • How can I install iWork '09 on new MacBook with Lion?

    I have an install DVD for iWork '09 (9.0.3), and I've been running iWork on my iMac for several years without a problem, even after upgrading to Lion. Now I have a new MacBook Air with Lion preloaded and am trying to install iWork on the new machine.

  • HTTP Receiver Adapter

    Hi, I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter. I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details: In Technical S

  • ADC - VGA

    Hi i have the G5 powermac oct 2004. The last G5 to carry the ADC and DVI ports i believe. hence my problem, as i don't want to pay for a very expensive apple display but i would like to dual monitor. i already have the DVI going to VGA going to phill

  • Street Number getting Truncated in BAPI_PO_CREATE and CHANGE

    Dear All For an PO create interface, we are trying to use BAPI_PO_CREATE and BAPI_PO_CHANGE . The issue is in the structure POADDRDELIVERY. Here we give delivery address of the Purchase Order line item which later gets populated in Delivery address t