Tray 1

Hi, I have a Officejet M570DW and I set up a printer app from the eprint service to print the "Kids only" activity sheet daily at 10 pm. The problem I have with it is that it wont print because the printer screen says there's no paper in tray 1. Tray one is the tray on the side of the printer for which you have to open a panel to use and seems to be designed for occasional use whereas all my paper is in Tray 2 which sits at the bottom of the printer. The message prompts me to press OK to use other available media which is fine but I don't want to have to manually do this everytime. Why does the Eprint Kids only app insist on using Tray 1. How can I tell the printer that tray 2 is the default tray, I can't see it in the settings anywhere.
Thanks

Vas1010,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • HP LaserJet P2015 Tray 1 paper feed

    My HP LaserJet P2015dn printer has been my workhorse printer since new, especially for printing checks, envelopes, forms from paper Tray 1. I always print using the Auto Select for paper feed, so that if there are checks/envelopes in Tray 1, they will be selected. For the past 6 weeks or so, the printer will not feed from Tray 1 on demand, that is will not pick paper from Tray 1 if Auto Select is enabled as I have used it in the past.
    Printer will pick from Tray 1 IF Tray 1 is specifically selected OR Tray 2 has no paper or is removed. I doubt I can retrain myself to do either of these things as work arounds.
    Stupidly, I paid a $50 bench fee for a technician to tell me the printer is mechanically working as it should. On further investigation, I have determined that the HP print drivers is use seem to have been installed on July 10, 2008 (about the time this issue started AFAIK) from a combined installer HPLaserJetP2015andColorLaserJet2605_2700.dmg which I installed for my Color LaserJet 2605dn printer.
    I still have the prior LJP2015OSXfullsol.dmg on my hard disk, but reinstalling same does not seem to replace the new driver with the old.
    So, is there any way to get rid of the the newer print software OR overlay the older on the newer? Other suggestions?

    So, I cranked up my old PowerBook G4 (OS 10.4.11) which has the older driver for the P2015dn and the problem remains.
    I have made some progress: If I want to print with paper feed from Tray 1, I pull Tray 2 out a few inches, load the paper in Tray 1, start the print job, and the yellow Attention LED flashes indicating an error. Note that the Paper Out light does NOT come on. So I press the Go button, the Attention LED goes out, and the print job completes using the forms in Tray 1 as desired.
    So I'm thinking now, What Error condition? and why does clearing it make it print?
    Certainly seems like a hardware problem to me as this is NOT the way the printer is supposed to work as documenetd in the User Guide.

  • HP LJ 600 M602 uses paper from other tray

    I have a problem with a new HP LJ 600 M602 printer.
    I think it's best to discribe an example of the problem.
    For example i start a printjob of 1000 pages from tray 1 which holds 500 sheets. Now it should just say tray 1 is empty when it hits the 500 pages printed but it wil automatically continue to print from tray 2. This should not be happening since i turned off the option "Use other tray" on the printer it's self and the web interface. It is also turned off in the printer settings on the computer in word that is used for the printing.
    The actual configuration of the printer is:
    Tray 1: Manual
    Tray 2: blank paper
    Tray 3: paper with corporate logo1
    Tray 4: paper with corporate logo2
    And all have the option "use other tray" turned off.
    Could this be a driver problem or am i missing a setting somewhere?
    Sorry if my english is not 100% it's not my native language, and thanks in advance if you can help  me!

    Hello Jackkemkens
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Will not recognize jump drive nor allow me to open DVD tray

    Intermittantly, my G5 will not show my jump drive nor a CD on the desktop. At those times, it will not open the DVD tray either.
    When this happens, I can go to system profiler and see both the jump drive and the CD--it's just not showing up on the desktop so I can't open them. The only way I can get the tray to open and to recognize the CD and or Jump Drive is to reboot the computer.
    What is going on and why don't these show up on the desktop nor allow me to open the DVD tray.
    G5   Mac OS X (10.4.3)  

    Make an appointment at an Apple store if there is one nearby.

  • BI Publisher Multiple tray/ Renaming of file / Zipping of BI Publisher O/P

    Hi Team,
    I want to know, whether we can achieve the following task in embedded BI publisher or not.
    Also, if we can do, let me know what are the possible steps to achieve them:
    1. Multiple Tray selection
    Here multiple Tray means different tray available in a single printer i.e tray 1 can have A4 paper, tray 2 can have A3 paper , tray 3 can have pre- printed stationary etc. so our BIP output can be send to multiple tray.
    *2. Checking the groupings - how many levels*
    Embedded BIP can provide a maximum of upto 4 levels of grouping.
    our requirement demand to group upto 7 level, I have suggested that we can achieve this through manual coding in RTF.
    *3. Email Feature - HTML (body is dynamic).*
    BIP has this emailing facility where we can have dynamic body in a mail. We need to figure out what max no of character , we can have in the body.
    *4. Reports that are uploaded to different folders.*
    It means that PDF/RTF files should be able to be copied to different folders like C:\DMU, D:\CTA etc
    5. Inserting records into SQL
    We need to find way for connecting to database and inserting our BIP records.
    6. Renaming files for the Email and Doc Central.
    We need to find out methods where we can rename our BIP outputs.Generally BIP file name gets generated automatically with UBE engine when it generates XML file.
    *7. Integrate with Doc Central (PDFs and Common XML)*
    Client is having one DOC Central software where client keeps repository of all its documents. we need to figure out that can we integrate our JDE with DOC central for keeping our BIP outputs in it.
    *8.Zipping of the files and sending the documents by FTP.*
    we need to figure out ways where we can zip our BIP outputs and send it through FTP.
    Let me know possible ways to achieve above 8 constraints, any java/dot net program if require to meet those above 8 facilities are also welcome.
    Thanks!
    Deepak Mishra

    Hi ,
    Do not have an answer yet . but with some research and trials it seems this may not be possible.
    Regards,
    PKB

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • Hp officejet Pro 8100 Printer Tray

    I have an HP Officejet Pro 8100 printer. I removed the paper tray this morning to load paper and now I can't get it to slide back in all the way. It stops about 4 inches short of closing.  I feel like an idiot! How can I have problems sliding a drawer in?  Are there any clips etc. that I should have in place, etc. that might have come off?
    This question was solved.
    View Solution.

    Hi,
    You might try lifting the front of the printer to see if anything is obstructing from your desk.  It should slide right back in.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Lately, when i open a tab, it does not open on top of already open tabs. I am forced to minimize Firefox and then click on the tab in my bottom tray to open it? Why would that be?

    This only started happening about 2 days ago. I will have tabs open, go to bookmarks and click on one. It seems that it is not opening but I then discovered that there is a tab at my desktop bottom tray that opened instead that I can click on to open the tab. However, it will not open unless I first minimize my bottom tray whole Firebox browser.

    That is the default action when you open a new tab. There are extensions that you can install to change it from a blank page to whatever you want.
    New Tab Homepage extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/777 <br />
    and <br />
    NewTabURL extension: <br />
    https://addons.mozilla.org/firefox/2221/

  • I am showing firefox in my tray but when I click on it, it will not open to a full screen. I have been using it up until today without a problem in Windows 7

    When I put my mouse over the firefox icon in the lower tray it shows small pictures of the home page but when i click on these they will not open to a full page. I am using windows 7. This problem just started today. I can use internet explorer without a problem. Thanks for any assistance you can give. I contact HP and they said to contact your support as they only support internet explorer.

    below is what I get with the dev.jeffersonscher.com etc. url. But what do I do with this information? I can launch safe mode, but I still get only the 2" icon/window of Firefox.
    JavaScript Browser Tests
    navigator object properties
    navigator.userAgent = Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
    navigator.appName = Microsoft Internet Explorer
    navigator.appCodeName = Mozilla
    navigator.appVersion = 5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
    navigator.platform = Win32
    DOM methods/collections
    if(document.getElementById) = true
    if(document.layers) = false
    if(document.all) = true
    window properties
    if(top.window.moveTo) = true
    if(top.window.moveTo(0,0)) =
    The following data is reported by a server running Microsoft IIS server and ASP:
    View selected http headers at <a href="svrvars.asp">svrvars.asp</a>

  • Can I have a replacement for my Nano SIM tray of iPad Mini?

    Hello, I just lost my nano sim tray of ipad mini 16GB white at a network carrier store. Does anyone know if I can get a replacement? I purchased the ipad in Singapore but I live in Ho Chi Minh, Vietnam. Do I have to write to Apple in Singapore or US to ask for help? I am willing to pay for the replacement as long as I can get one for my iPad. i am afraid that Apple store in Ho Chi Minh would not help me for this stuff. Thanks much for your advices!

    Hello, I just lost my nano sim tray of ipad mini 16GB white at a network carrier store. Does anyone know if I can get a replacement? I purchased the ipad in Singapore but I live in Ho Chi Minh, Vietnam. Do I have to write to Apple in Singapore or US to ask for help? I am willing to pay for the replacement as long as I can get one for my iPad. i am afraid that Apple store in Ho Chi Minh would not help me for this stuff. Thanks much for your advices!

  • Satellite L300- 1AQ - Bluetooth tray application has stopped working

    When i put my laptop on it comes up with an error which says:
    *bluetooth tray application has stopped working*
    A problem caused the problem to stop working correctly.
    Windows will close the program and notify you if a solution is available.
    Anyone got a solution?
    The laptop is a Satellite L300- 1AQ
    Only had it a month!!
    Please help, thankyou
    xx

    Hi
    Did you try to reinstall the Toshiba BT stack?
    Usually this should help to get rid of this error message.
    Here you can download the newest BT stack:
    http://aps2.toshiba-tro.de/bluetooth/
    Remove firstly the old BT software from the system and after new reboot install the BT downloaded from the Toshiba BT page.
    Bye

  • Hp dvd 1040i Disk tray doesn't open half the time

    My disk tray is awful to try to open. I press the button, activity light, lights, but the tray doesn't open. Press and hold the button and the same thing happens. I have to go into Windows Explorer (XP sp3) and right click the drive and select "eject" to get the disk tray open. About 10% of the time the button described above does work, 90% not.
    I noticed in my device manager the drive is described as "HP DVD WRITER 1040d". Did I get the wrong driver with this drive?  I cannot find any DVD support on the HP site.

    I wanted to add that the "pin method" of opening the drive is also requires multiple tries and seems no more successful overall than just pushing the button repeatedly.  I actually have the best luck getting them to open by applying leverage with the tip of a knife as I push the button. 

  • 10.4.9 problem on DNG files and cd open/close tray

    After the new OS release, the file preview of my Leica M8 DNG files are no more visible. I need to open them but even setting "show icon preview" in the folder prefernces i get no result. Apple Preview also doesn't open the file anymore.
    In addition, to open the CD tray, now it requires to push the botton for at least double the time.
    Waiting for the fixies to this annoying problems.....
    .oesse.

    I updated to Tiger 10.4.9 the other day on my MacPro and today found that the Eject key wouldn't open the CD tray. When I realized that I had just experienced the same problem on a G5 at work a light went off in my head. Now reading this posting, I see that it is not "broken" but that the behavior of the key has changed.
    Since the behavior of the key has always been to just hit it, not hold it down, to open and close the tray, I don't see any good reason to change it. No other key on the keyboard requires one hold it down. It's counter-intuitive. I had already filed a ticket with my company's Mac tech support service to say my CD drive was malfunctioning and may need replacement. I had been able to open the door with a paper clip in the tiny hole and then insert and play a disk, but had not been able to make the tray operate normally. All of this because the behavior of the key has changed. I'd be willing to bet that people will be buying and replacing drives because they aren't aware. Certainly there will be a lot of money and time spent registering and responding to tech support calls on this silly issue. What a waste.
    I hadn't realized that the work computer had been updated to 10.4.9, and will still need to check this out, but I assume that is the case. I have to admit I didn't read the ReadMe file for the update I did at home because I was rushed and decided to forego that. Perhaps it speaks of this change. Does anyone know? Certainly if it does not, it should. I for one think Apple was a little knee-jerk on this one. Those who whine about a tray opening when they slip up and hit the wrong key should just be told to grow up.

  • Okay so my i just got my new iphone 4 from sprint and sprint has the sim tray locked theres no hole on the side or anything and i was wondering if i took it to the apple store can i get it unlocked or another iphone with a open and close sim tray

    sprint shouldnt have locked the sim tray anyways and i think this is just wrong because i payed for the phone and should be able to do what i want with it. they say you can unlock the sim card or the tray i guess if you in good standings with the company an apperantly im not so i was wondering if somthing can be done about this because i see no hole or anything to even open the tray someone HELP ME ! please and thank you

    No. Nothing can be done about this. It was made clear quite some time ago what the situation was going to be.
    Now... That said, if you have an iPhone 4S, there is a SIM tray on the right hand side of the phone.
    If you have an iPhone 4 as you indicate, THERE IS NO SIM TRAY. The iPhone 4 is NOT a world Phone. You can only use that phone on Sprint or roam to their CDMA partners where present. The phone will not work at all throughout most of the world, including Europe.

  • Opening/closing cd tray...

    So I guess “drutil tray open/close” only works on G4s & G5s.
    I had some fun with it at work today but when I got home
    realized it doesn't work for my B&W G3.
    Is there another command that'll open/close the tray or
    am I outta luck on my G3?
    Thanks in advance!
    Mike

    Thanks folks - but none of that worked.
    I don't have a cd stuck in there or anything.
    I can open it via terminal with a cd in the tray but
    can't open/close an empty tray.
    I'm just trying to do this in terminal for fun.
    F12 does work but I'm trying to figure out
    the unix command to mess with the wife's head
    while I'm at work! hehe
    Thanks again!
    Mike
    I've read somewhere that the G4 & G5 have a “powered”
    cd drive??? - wouldn't all of them be powered???

  • Opening/closing cd tray using terminal...

    So I guess “drutil tray open/close” only works on G4s & G5s.
    I had some fun with it at work today but when I got home
    realized it doesn't work for my B&W G3.
    Is there another command that'll open/close the tray or
    am I outta luck on my G3?
    Thanks in advance!
    Mike

    You might need to use the command, disktool, instead.

Maybe you are looking for