Tre 755P - no audio 4 calls in or out

I realized this morning that I have no audio for calls coming in or out of my treo 755P. Any suggestions?
Post relates to: Treo 755p (Sprint)
This question was solved.
View Solution.

Thanks for reporting back ccarrisalez!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

Hi there,
I have a problem with the office communicator. I'm able to make a call to one party without any problems. The issue occurs when I add two or more parties into the conversation. The call button will be greyed out and Im unable to make a call.
I've uninstalled and reinstalled the OCS but the problem still persists.
Appreciate if anybody could help.
Regards,
Vinod

Agree with Anthony.<o:p></o:p>
You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
Lisa Zheng
TechNet Community Support

Digital Audio In to Line Out Not working.

How do you route digital Audio in to Line out? I have a 2010 Mac Pro, running digital in and have validated it's a good signal. No sound through the line out.
In the interim, i've used Audio Hijack to route it through the line out with no issue. I'm confused as to why i must use this 3rd party product to route the audio. Any ideas, this can't possibly be a new problem.
Thanks!

I've had problems connecting my computer to my cable box as well. Comcast apparently disables some of the functions on its boxes. Call your cable company. It's most likely a problem with your box, not your computer.
Good luck and if you find the problem let me know.

StreamigHow to get audio component of Video out of AirPort/stereo using MBA

Ok will some one help me with this please:
I was experimenting with streaming video. I was watching Leo Laporte's TWiT Live show
http://twit.tv/roz13
where he was talking to Roz Savage the woman who is rowing across the Pacific alone ! This was live feed (including rower's audio from the middle of the ocean); very cool ! Laugh but she is half way to Hawaii and she has already rowed the Atlantic (no sail). The show is called Roz Rows. Leo checks in with her several times a week. Past shows are on iTunes.
Ok I got off track but she is truly awesome in a time when that word is used to describe somebody's socks.
My happy MacBook Air experience to get off the track again: On battery I was watching the live video stream and my iStat showed heat ~55 C and fan 2800 rpm very cool !
I was getting down to 25% battery so I plugged in the charger cable. The temp climbed slowly but predictably to the high heat side of the scale (68 C 6200 rpm) and stabilized. Once again hot but I am happy.
Interesting how cool it was before hooking up charging lead. I am so happy about that !
Now we get to the question ta da !
I want to know how to get the audio for the streaming video to come out of the audio system connected to my Airport Express. Listening to music on iTunes it works fine. Watching an iTunes purchased TV episode on iTunes it _does not_ (the sound comes out of the computer speaker) no matter the setting on the low right hand corner of the window. Perhaps I should be in the iTunes or AirPort discussions but wanted to post positive experience here with streaming video using MacBook Air.

it might be possible using airfoil or similar utility...
http://www.rogueamoeba.com/airfoil/mac/
...but you will probably find that audio/video are badly out of sync due to the latency on the streamed audio
if the video is playing in something like vlc you can compensate by adjusting the audio/video sync (although it is fiddly and drifts because the latency varies) but in itunes you can't

Bluetooth MAP SMS works in my vehicle but "reply" & "call" options grayed out

I have an iPhone 4S updated to the IOS 6. I have a 2012 Honda CRV that supports bluetooth SMS. The phone paired with the vehicle and phone calls work, streaming audio works and even SMS works. The vehicle does read the SMS messages well, but the options to "reply" or "call" are grayed out so it's not an option. But, I've noticed that when I get a text message from someone not in my contact list the vehicle system will read the text like normal but now the option for "reply" and "call" IS available. So when I get a text from someone in my contacts the vehicle can only read it but when I get a text message from someone not in my contacts the vehicle can read, reply, or call. Is this something with the bluetooth profile? It seems like something that can be fixed with a software update. Anyone have some insight?

My question doesn't not need to be taken as a question about the vehicle specifically. Yes I have this question up in Acura forums as well. I am looking to see if others with an iPhone 5 or iOS 6 have tried their MAP protocol on anything basically and wondering the results of their tries.
To recall my question: Does iOS 6 have MAP Protocol for SMS read back and reply in my vehicle? & On iOS 5 this was not supported but I have read that now it is. Has anyone tried this function?

What are the iTunes digital audio levels in and out

I am having a lot of trouble with finding out and setting the audio levels in and out of iTunes.
Digital audio has 16bits at '1' with an analog signal level of +12dB, 24bit has all'1's at +18dB. Making the overhead capability for CD 16bit 12dB and that for HD 24bit 18dB.
I would like to record (using SoundStudio) a set of standard audio tones from 20-20kHz with digital levels of "all 1's" 16bit, or +12 dB analog level, "all 1's" 24bit ditto, and the same for levels of analog 0dB (-12dB digital) for 16bit and 0dB(-18dB digital) for 24bit.
What I am finding is that if I get Sound Studio to inert a tone at what it calls 0dB, save it as AIFF, then the output it from iTunes I get a much higher level, around +8dB or so!
Any ideas?

As an addition to my first question. I asked the makers of Sound Studio about levels. They tell me that the Mac standard is to have all '1's in the digital stream defined as 0dB.
Which helps as I can now record a tone at the CD level of -12dB and the HD audio level of -18dB. And if I make recordings I know to keep the input levels well into the green, not yellow and definitely not up to the red.
As you say the output of iTunes is boosted, and from my measurements this boost is in the analog circuitry and is about +8dB.
I woul dnot recommend turing down the iTunes volume control as this brings in the digital volume reduction, which depends on the algorithm they have implemented. This is not so bad for iTunes as the Audio Core software works at 32bit and can handle 16bit volume changes fairly well. But on the iPad it is different as iOS is only 16bit audio so the volume algorithm is poor. So always leave the volume at maximum and turn down your HiFi volume control!
Or use a digital output to an external DAC as the iTunes volume control is then disabled. Set Audio MIDI for 24bit output and you are ready to go with HD Audio.

No audio call with pidgin+openbox+gtalk

I'd like to make an audio call (gtalk) from pidgin 2.10.1-1, but option is disabled, greyed out. I've gstreamer plugins, farsight2 installed.
Any idea what I'm missing?

Hi folks - my Lumia 900 Windows Phone was purchased in Nov 2012, no problems with it until recently when the audio on the earpiece stopped working. If I switch to Speaker, I can hear everything loud & clear, but that is not convenient most of the time. Vols on 10, no bluetooth on.
Have tried turning the phone off & back on (soft reboot) which initially seemed to re-set the earpiece speaker, but now makes no difference - the earpiece audio is intermittently dead. Frustrating when you ring someone & get silence, yet a few minutes before audio was OK. Hard reset is last ditch - I dont think it will help this intermittent problem
Sounds like this might be a fairly common fault with the Lumia 900. Just bought an 820 for my wife so I hope the problem is not contagious. Time to back up the Contacts list and make sure the Zune synch is up to date i think. At least my supplier's support is on the ball regarding a warranty claim - looks like that is what the outcome will be.
B.

Audio cuts in and out on iPhone 4S

I have an iPhone 4S (16 GB) that is on version 6.0.1. My problem has to do with sound cutting in and out when listening to music, using apps or watching videos (audio never cuts out on actual phone calls). The issue happens both when I'm streaming online and using local programs (like apps or iTunes). The music plays anywhere from 15 to 45 seconds, then the audio cuts. The volume bar disappears and the iPhone pauses the muted music 3 to 5 seconds after. If you hit Play again, it works for about 3 to 5 seconds before cutting again and automatically pausing.
Is anyone else experiencing this issue or have heard of it reported? I noticed this issue on my device four days ago.

Hey Fitz,
I was just in to the Apple Store to have the same issue looked at for my iPhone 4. Audio cutting in and out across programs, headphones or not, with the volume bar dissapearing when the problem occurred. Turns out its damage to the audio processor (evidently located near the speakers). Can be from water damage, wear and tear or as simple as dust. I had to replace mine outright, but the employee was saying sometimes they just need a cleaning. Worthwhile having it looked at.
Sorry there isn't an easier fix!

TS3367 decline facetime call button greyed out

My daughter said she got a facetime call from someone she didn't know on her iPod touch. She had to ignore the call as the decline button was greayed out. Is this a bug? Also is there some way to manage privacy on facetime, e.g. only contacts can facetime her?

Agree with Anthony.<o:p></o:p>
You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
Lisa Zheng
TechNet Community Support

Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.

Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you.

I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I have an iPhone 4s

I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I need to get it back on so I can face time with my family. The phone says 3G but it keeps saying on list mode. I signed on icloud and removed it from the account and nothing. Please help!

If you removed the device from your iCloud account rather than using the "Stop Lost Mode" option, then you will most certainly need to restore the iPhone, and that will require a computer running iTunes.
http://support.apple.com/kb/HT1414
Regards.

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Looking for a way to get built in audio to be heard out of AirTunes

Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

Need ANI details of calls landing during Out of business hours

Hello All,
Our Contact Center management has raised a new requirement to report with the ANI details of calls landing at any skill groups during put of business hours.
Options that we have is
1. Webview report - Call Type 22 and 23
But in this, If we specify put of business timings and generate the report it will give the number of calls and not its ANI.
2. Call detail report from our custom report application.
Here the problem is, this report will give details of calls landing during business hours alone. The reason is that only the calls that utilizes VXML ports in CVP gets to this custom report. The calls coming in during of hours is handled at ICM level and to play the out of office hours prompt it utilizes CVP port not VXML and terminates the call.
Is there any way to get this ANI details without having to modify this custom report much. Please assist in this. Let me know if you need any more details.

That's pretty strange.
Let's just see how you are doing this. Once you detect the out of hours situation in your Routing Script (either by checking a Global variable refreshed by an Admin script or by having a Time of Day node directly in the routing script), do you set a Call Type?
Then after setting the call type, I assume you play a CVP message and Release the call. Correct?
When you query the TCD on this call type you should only see your after hours calls. Let's look at one of the calls.
You should see two rows in the TCD, one with the DNIS of your number on the gateway, or from the PSTN carrier, and one with the VRU transfer label (say 8111111111) - maybe that's in the DigitsDialed column, I'm not in front of an HDS database and can't check. This is all you should see for a call that comes out of hours.
Both these legs should have the same RouterCallKey with different RouterCallKeySequenceNumbers.
Do you see this?
What is happening with another call at a similar time with a different RouterCallKey ? That doesn't make sense.
Maybe you could do a query and show us the output?
Regards,
Geoff

Tre 755P - no audio 4 calls in or out

Similar Messages

Maybe you are looking for