Treasury Node in IMG

Dear Friends
we are working in sap ecc 604 system. the FSCM functionalities are used very less. In our system we are getting Treasury nodes in main menu path. but the same is missing in the IMG path. Please guide us which business function set net to be activiated for the same. will it be having any impact on production environment.
thanks in advance

Hi,
In SFW5, ensure that the EA-FS extensions are activated. If you activate it here, then the corresponding nodes will appear in IMG.
Regards,
Ravi

Similar Messages

Implementing MRS 9 missing node /MRSS/IMG Sources of Demand Orders

Hi,
We just install MRS 9 on a ECC 6 system and when I want to do the customizing for PM/CS I can't the in the /MRSS/IMG the node /MRSS/IMG >Sources of Demand> Orders.
What did I do wrong here?
Thanks

Hi Boby,
a lot of questions
1. Question: Here is the Customizing Path
2. Basic Settings is a customizing path:
3, This is where you do the PM/CS Customizing
4.
Generally you are right, there are many inconsitancies which often lead to irritation, you can also find this in the descriptions of the customizing activities.
BR
Olaf

New node in IMG

Dear Guru's,
I ahve a requirement where i need to add a new node to the IMG and assign a bunch of tcodes. Can any on advice me how to.
Regards
Karthik

Hi Karthik.
I would like to suggest a couple of references,
[SAP HELP Library - Standard Reference for Change Project IMG - Nodes|http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81c8752c511d182c50000e829fbfe/content.htm]
[SAP HELP Library - Standard Reference for IMG Enhancement - Node Operations|http://help.sap.com/saphelp_nw04/helpdata/en/c2/f30e5861d411d395df00a0c930dcc1/content.htm]
[SAP HELP Library - Standard Reference for Create Maintenance Objects - Transaction Settings|http://help.sap.com/saphelp_nw04/helpdata/en/13/54e34150cb11d395cf00a0c930dcc1/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

After applying support package up to sapkb64020 finance node in IMG disappe

We havwe an ECC5. It seems that (very probably as we noticed aftervards)after applying
support package up to sapkb64020 in IMG(SPRO) "finance" node(and nodes
beneath) disappeared. As this is very urgent I would kindly ask you for good answers

Hey,
The sulotion for this problem exists in note number 922552:
Note 922552 - SPRO: Financial Accounting Node not visible in Reference IMG
good luck

Delete a Custom Node from IMG

Dear All,
I have a custom table (Z or Y table) for which, I have also created the Table Maintainence Generator(TMG).
For this custom table, I also added an entry in IMG.
For some reason, now I want to delete this table. In a step-wise process, I deleted all the other objects which were using this table first. Then I deleted the entry from IMG. Then I am trying to delete this TMG for the table and then as the last step, I will delete my table.
My Problem is, whenever I try to delete this TMG, it gives me an error, saying it is still being used somewhere in IMG. Where as, I can literally find no entry for this table anymore in my IMG.
Any Idea. Is it another great Bug from SAP. I have re-generated the Object Index for the whole Packet many a times in SE80. I have also clicked the Buffer button in S_IMG_EXTENSION transaction many times. What to do?
Thank you.

Hi Ankit,
An entry might be still existing in TADIR for that IMG customizing I guess.
You can not delete the TMG as long as that entry exists, try to look for some notes around that.
Regards
Lavanya

Adding custom nodes in SAP reference IMG and accessing them using SM30

I was able to successfully add an IMG node and few activities under the node (for our custom configuration table data entry) in SAP reference IMG. (using transaction SIMGH).
However, when I execute transaction SM30, enter the name of the custom table and hit the button customizing, it does not take me to the appropriate node in IMG. It simply doesn't do anything.
For any SAP table or view, this works like a charm (wherever SAP has configured the nodes). But when we create custom nodes for custom tables, it does not work.
What steps am I missing?
I will really appreciate any help you can provide.
Jitendra Mehta

Hi Sree:
I assume you have either created your view maintenance for Z tables or you have created transaction attaching calling SM30 for view maintenance of your Z table.
You may go in transaction SIMGH and in SAP reference IMG, create a main node (wherever your end client wants you to put it) and under this node, you can create sub-node for each view maintenance with a suitable description of sub-node.
Once you save and activate, you are done.
Then you can execute transaction SPRO and you should see your custom nodes wherever you attached them in the tree.
I hope I understood your problem and have answered it.
If not, please let me know and we can discuss it further.
Thanks.
Jitendra Mehta

Custom nodes are deleted for IMG after upgrade

Gurus,
We are in processes of upgrading form ECC5 to ECCC6.
In ECC5 we have custom node in IMG , which were created using SIMGH.
After the upgrade all the custom nodes are deleted , is there a way to retrieve the custom node or is there a way custom node are not touched during upgrade .
Thanks for the help in advance.
KJ

Hi Ketan,
You have used transaction SIMGH for modifying the SAP reference IMG in the old release. Those modifications gets lost
while upgrading your system. Right?
Even these custom node disappeared from IMG structure, but the customerspecific IMG structures or IMG-activities should be
still available within the upgraded system. That means, you only need to reassign your IMG structures or IMG-activities with transaction S_IMG_EXTENSION .
Those enhancements do not get lost with the next upgrade in future.
With Best Regards
Julia Song

How to add own customized transaction in SPRO (IMG Menu Path)

Dear All,
I have a requirement of adding new customized transaction in IMG menu path. Can you please help me out how to do that?
Best wishes,
Atanu

Hi
Can you try this way:
You need to modify the structure ( node ) that you want to modify using transaction SIMGH. First you need to go to transaction SIMGH.
In the IMG structure just press f4 -> you need to give the title of the structure that needs to be edited. f8. Then you can modify the structure -> insert node.
You need to give the node text.
After creating the node, click on the node and select insert activity.
In the ID field give an entry, Give the description in 'name'.
Please check this link on how to add a node in IMG.
http://help.sap.com/saphelp_sm32/helpdata/en/9a/b7b2375ca97f68e10000009b38f8cf/content.htm
Regards,
Sreeram

Add Custom Transaction in IMG SPRO

Hi All,
I have created a Custom Table maintanence transaction and I want to add this transaction to IMG (SPRO). This needs tobhe added as an extra in one of the Tree for example under the 'Materials management'
Can any of you please tell me how can i do this.
Regards,
Midhun.

Hi,
You need to modify the structure ( node ) that you want to modify using transaction SIMGH. First you need to go to transaction SIMGH.
In the IMG structure just press f4 -> you need to give the title of the structure that needs to be edited. f8. Then you can modify the structure -> insert node.
You need to give the node text.
After creating the node, click on the node and select insert activity.
In the ID field give an entry, Give the description in 'name'.
Please check this link on how to add a node in IMG.
http://help.sap.com/saphelp_sm32/helpdata/en/9a/b7b2375ca97f68e10000009b38f8cf/content.htm
<b>Reward points</b>
Regards

Logic Node 9 not working with mac mini

MBP late 2008 4gb ram 500gb hd + New Mac Mini 2009 Base with 1gb ram
Logic Node installed - settings under audio checked... etc
Node working (slightly) see picture
I had to unplug the edirol keyboard, brother laser printer, fw800 drives, 3 usb hard drives, external alu keyboard griffin powermate and turn off airport to get working.
then after it was working I would still get overload messages (see below)
barely sending anything to the node...
[IMG]http://www.musicrowsongs.com/logicnode.jpg[/IMG]
any ideas?
thanx
michael

1.) when node not working it appears to be the fw800 drives
2) when it does work - no major node processing
[img]http://www.musicrowsongs.com/logicnode2.jpg[/img]
Using a lot of high end waves plugs
mercury v6r7 - perhaps Maserati - API - SSL not going into the node? Why?

Spro node clarifiaction.

Dear all,
The following below are the nodes under u2018Objective Setting and Appraisalsu2019.
Define Tabs and Process Configuration for Template
Settings for Predefined Performance Management Process
Define Templates for Performance Management
Configure Performance Management ProcessNeed your assistance in knowing about these nodes.
For what purpose and in which scenarios these nodes be used?
When I am trying to execute the IMG activity for example:
Define Templates for Performance Management: system takes me to url as mentioned below, but finally the url page is not opening.
http://dqesap04.scidev.com:8010/sap/bc/webdynpro/sap/hap_a_tm_conf?sap-wd-configId=HAP_AC_TM_CONF&sap-client=800&sap-language=E
Regards,
Prakash

Dear,
Please let me know the following:
1.spro node to be corrected
What type of corrections you want to make, for accessing SPRO node you can go SAP Menu>Tools>Customizing--
>IMG-->Execute project (SPRO) this will open SPRO node
2. img node for zfcot
What is ZFCOT, do you want to create new project in IMG? If yes then
SAP Menu>Tools>Customizing>IMG>Project Administration, this will open a screen where you can create new project.
Br, Vivek

INLK --Mid Year Go-Live

Hi,
Can you gmme the strategy of how to about loading table 558c?
I mean what all wagetypes i should consider loading into this table. We have huge employee database which need to be uploaded.
Regards
29241

You have a detailed document on the following two nodes in IMG
1. Define Periods for Import - T558B
2. Define Pay Elements for Import - T558C
IMG path Payroll --> Payroll India --> Legacy Data Transfer
These two nodes talk in detail about the template/format for uploading data into these tables.
Also SAP have delivered two utility programs HINU58B0 & HINU58C0 for uploading data into T558B & T558C in mass. Once we have the data in required format (.txt), we can use these utility programs to upload the respective tables.
Please reward if this was helpful.
Regards
Ravikumar

Report for Cash flow (fund flow from Bank GL)

Hi Expert,
I would like to have your advice on how can I create this type of report? Is it better using Fund Management?
My client is asking on cash flow report in which the report should show all fund (cash at bank) movement. Basically, the report should have 2 main category, which are Cash Inflow / Cash Outflow,for example:
Cash Inflow
- Payment received from customer
- Interest received from FD at Bank
- Other receipts
- Government Subsidy Received
- Government Grant
Cash Outflow
- Payment to vendor
- Finance charge paid to bank (overdraft/loan, etc)
- Operating Expenses
- CAPEX
- Other Payments
For cash inflow, double entries involve to bank GL is as follows:
DR Bank
CR Item listed in cash inflow section, for example: payment received from customer (or CR csutomer), FD interest received (Revenue item of P/L), etc
For cash outflow, double entries involve to bank GL is as follows:
DR Item listed in cash outflow section, for example: payment to vendor (or DR vendor), Payment to non-trade vendor (for asset purchase, etc), Interest paid (expense item of P/L), etc
Questions:
Since my debit or credit leg of my bank account, currently does not have any indicator that can explicitly indicator the nature of my inflow and outflow, how can I produce my report of cash flow show above?
Note: It is extremely heavy for customized ABAP program to extract my bank entry and point back to the opposite leg to find the nature of my inflow/outflow as well.
Kindly advise.
Thanks in advance,
sbmel

Hi
In ECC 6.0 EhP4 - A new feature has been added inorder to provide such a kind of cash flow report... You need to activate Business Function PSM_FA_CASH..
Refer this link http://help.sap.com/erp2005_ehp_04/helpdata/EN/42/e34f2c31023ee1e10000000a1553f6/frameset.htm...
... Under Business Functions in SAP ERP > Enterprise Busn Func > Accounting > Public Sector management > PSM, Cash basis accounting & Cash flow reporting
Once you activate it, you will find additional nodes of IMG under SPRO > Public Sector management.....
This works the same way as Doc Splitting... technically speaking, this new feature is extended arm of Doc Spliting... In Doc Splitting, you assign item Categories to each GL Account.... Similarly, you will assign a "Revenue / Expense Account" to each GL Account.... This R/E Account can be any alpha numeric text.... This R/E account then gets added as a Doc Splittin Char and is populated in every FI Doc that you post
I have tried this in a test client a year ago and was more or less satisified with it barring some exceptions....
br, Ajay M

Error in J1IIN for create Excise for Factory sale

Hi,
I need your help regarding Sales excise.
The scenario is I have created PO and done with MIGO so Part I and Part II register are getting hit BED is showing.
My problem is now I have to use the amout for sales cycle i.e after genrating accounting document for sales order I am using T Code J1IIN
when I enter the Billing Document and hit enter the BED amount is showing '0' (zero).
When I try to save the document it gives me warning message "No defaults could be proposed for Excise utilization." and after that it gives me error message saying "GL account has not been assigned for RG23AECS in customization.".
I have maintain the entries in for OTHR - RG23 ECS Account and also specified G/L Accounts per Excise Transaction is maintianed for G/L RG23AE.
Can some one guide me is there any other config which has to be done.
Thanks in Advance
Regards,
Arvind
Points will be awarded.

Hi Arvind,
Relevant GL accounts we have to attach for ETT Type DLFC (for Sales) in ETT Table.
Assign GL Accounts for excise transactions node in IMG.
Path: Logistic General u2192 Tax on Goods Movement u2192 India u2192 Master data u2192 Account Determination u2192 Specify Excise & G/L Accounts per Excise Transaction.
Thanks and regards,
Padmaja N

Portal runtime error on creating Travel Request

I have copied the standard ESS Role and created my own ESS Role. I then assigned this to my portal user.
Then when I log into the portal as the user and click on "Create Travel Request" or "Create Expense Report" URLs, I get the following error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:53_02/02/10_0021_23623650
Refer to the log file for details about this exception.
Is there any portal/IMG setup that is missing? Or any authorization missing?

Thanks I made changes to Resources node in IMG.
Before making these changes I was getting the following error:
Portal Runtime error. An exception occured while processing your request... Exception ID:.... Refer to log for details....
I just changed the URL of PCD page in the Resources node.
Note:
(1) In Portal I have made my own folder structure:
-> Portant Content
-->My Travel Setup
--->Employee Self-Service
>Roles
>MyTravelESS (role copy of the original Portal ESS role, Delta link. i.e. ESS role under End User Content-->Employee Self-Service)
(2) I have not copied the iviews, pages worksets etc. under my new folder structure.
But Now I am getting another error:
500 Internal Server Error...
Root Cause
The initial exception that caused the request to fail, was:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name base

Treasury Node in IMG

Similar Messages

Maybe you are looking for