Treatment of exchange rate difference in MIRO

dear all,
During the GR entry the value in USD IS 10000 & exchange rate is Rs.50.00.But at the time of MIRO the value is USD-12000 & the excange rate is Rs.52.50.
The above transaction should have the following accounting entry.
At GR.
Stores a/c Dr. 500000 (10000*50.00)
To Provision a/c 500000
At MIRO
Provision a/c Dr.                500000
Stores a/c Dr                     100000 (USD2000*50.00)
Exchange rate Diff.a/c Dr. 30000 (USD12000*2.50)
To Vendor                                     630000
Now how to give this effect in MIRO pl. advice.
Thanks
Shivaji

Dear,
Please check the following:
1. There is a price difference in PO price and Price at MIRO --I can see there is
2. Please check if your stock exist-- I am sure stock is there
If above is true then this is standard behavior of SAP..
Please note: If there is any price difference in PO price and Invoice amount then system post difference to stock Account is Stock Exist, if stock do not exist then it post to your price difference account.
Hope this is clear to you, if not then please revert...
Br,Vivek

Similar Messages

Exchange rate difference between MIRO and GR/IR

Hi,
Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
Thanks in Advance
Regards
Venkata Suresh

Hi,
At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
There enter the exch loss GL account and enter the diff amount.
Thanks,
Srinu.

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

Exchange Rate Difference in MIRO not posted to the KDM account

Dear Gurus,
I have a query, I have defined an account in KDM. After the GR of the PO, if there is a difference in Exchange Rate system posts the Exchange Rate Difference to the Stock Account.
My client wants this this difference at the time of MIRO should be posted to the KDM account. I am invoicing in my Company Code Currency not in PO currency this is also a requirement.
Kindly provide me a solution for this.
Regards,

If material price is standard then only KDM account will account.
Check this answered link [Exchange Rate Difference |Exchange Rate Difference]
Edited by: Jeyakanthan A on Aug 3, 2010 2:13 PM

Unplanned delivery cost & exchange rate differences in MIRO

Hi Gurus,
while posting MIRO, I am facing the following problems. If anybody gives me reply, it will be a great help.
1. Unplanned delivery cost:
Client requirement is, these unplanned delivery costs should be added on material only.
how we can map this? how system behaves when stock is there and not there? also tell me which G/Ls will trigger.
2. Exchange Rate:
I maintained exchange rate in OB08. while doing MIRO, how system posts exchange rate differences.
which G/Ls will trigger.
in case of conditions like customs duty, cess etc how system will behave? which G/Ls will trigger?
Thanks in advance
KK

Hi,
According to first question:
For unplanned cost You have configuration for plant code:
Configuration: SPRO->MM->LIV->Incoming invoice->Configured how unplanned delivery cost are posted
You have 2 options:
- Distribute among invoice items
- Different G/L line
You have another option, You can assigne this cost for item when You use fright cost condition in PO (FRA/FRB)
If the stock will be available, then system incrase valuation, If not will be deviation.
G/L account for unplanned cost is taking from PRD(for Distribute among invoice items) or UPF(for Different G/L line) transaction from OBYC tcode and for FRA/FRB condition is FR1.
Question 2:
Configuration: SPRO->MM->LIV->Incoming invoice->Configure How Exchange Rate Differences Are Treated
G/L account takes from KDR transaction from OBYC tcode.
Regards
Lukasz

Exchange Rate difference in MIRO

Hi,
A Import PO made at 63.52/EURO and Exchange rate Fixed not ticked.
When i do the MIRO,the exchange rate shows as 56.9/EURO and the field is greyed out.
How the Invoice can be posted and where the differnce will go.
Is there any configuration for this?
Regards

hi,
If Exchange rates difference has occured, then its posted to the Exchange rate difference account....
You can make it fix by using the FIX Exc. rate indicator at the PO header...By this the rate will be fixed throughout the process ie. from PO to IR...
Regards
Priyanka.P

Exchange Rate - Differences between MIRO and F-43.

Hi All,
Anyone know if it is possible to include in MIRO, in a standard way, the field "Translation Date" presented in transaction F-43?
THNKS in advance!
BR
JEC

No, not with std config
but you can do the custom developement.
make sure when you post the query
it should match you query and subject information
for this query the subject is diff than your query

Exchange rate difference in MIGO and MIRO

Dear Experts,
Our local currency is INR.
We have created PO and MIGO on 31.03.2015 with exchange rate 62.5908 without tick on fixed exchange rate in PO. OB08 is also same on 31.03.2015. But at the time of MIRO system showing error massage for configure KDM even if i put exchange rate manually (62.5908) in MIRO.
                    GR/IR Dr         62.5908
                           To Vendor        NIL
                    Total                  63.5908
I have also made down payment to this in UDS
Local Curr(INR)
Doc. Curr (USD)
Ex. Rate
PO No.
       32,081,541.24
           505,002.42
               63.52750
5500200091
       93,721,425.00
       1,494,998.00
               62.69000
Please advice how can i debug exchange rate 63.5908. if i assign GL on KDM then system will debit this difference in that GL
Thanks in advance. Your suggestions will be highly appreciated.
Best Regards,

Hi Monika
Please also exchange how you have set up the treatment of exchange rate differences for your company code for LIV under the path:
IMG>Materials Management>Logistics Invoice verification> Incoming Invoice>Configure how exchange rate differences are treated
Check if you have N or X maintained here. If you have any of this config, you will need to maintain the GL Account in KDM as well
Regards
Sanil Bhandari

Exchange rate difference not getting posted to KDM account during MIGO/MIRO

Hello Gurus,
I have a purchase order with many line items. For some of the line items, the exchagne rate difference between the date of MIGO and the date of MIGO is taken to the KDM account. But for some other line items, it is not being taken the KDM. For such line items, the value of the GR/IR account in the local currency is different from MIGO to MIRO. Due to this, the GR/IR clearing is not happening automatically.
Do you have any idea, why the system is not taking the different to KDM for some line items and taking it correctly to KDM for others.
The only difference that I noticed between these 2 line items was
In case where the KDM account is determined, the GR was done for only one line item
In case where the KDM was not determined, the GR was done for more than one line item.
Thanks in advance for your replies
Thanks and Regards
Venkatesh

Hi Venkatesh,
I suspect that in your system may be the setting in OMRW is not activated. If the CCurr indicator is not activated for respective company code. Please refer to the information from note 980402 :
After you implement this note, you can use Customizing transaction OMRW to make settings for the new logic for each company code and each currency (the first local currency and two other material ledger currencies, if the material ledger is active). If the CCCurr indicator (V_169P_PK-KDHW) is set, this activates a new logic for calculating the exchange rate difference (KDM amount) in the company code currency (first local currency). As a result, the system also generates KDM lines for purchase orders with account assignment and for purchase orders with MAP materials in inventory management and in invoice verification if required. If the material ledger (ML) is active, you can set a corresponding indicator for additional ML currencies.Bear in mind that the system performs a 1:1 cancellation for the KDM line in the cancellation transactions.
If the indicator is not activated, then the new logic for calculating the exchange rate difference is not active.
I hope this helps.
Regards
Ravinagh Boni

Exchange rate difference while posting ME21N MIGO and MIRO

Hi All,
I am facing one problem with exchange rate type between M and EURX and EURX is maintanined in the SPRO>SAP Netweaver>General Settings>currencies>Check Exchange rate types
EXRT : EURX
Usage    : EMU Reg,fixed
Ref.Curr    : EUR
Buy.ra.at
Sall .Rat.At
Inv
EMU   :X
FIXED
Scenario:
Company(USD) is maintaning Exchange rate type: M and no exchange rates are maintained for USD:EUR or EUR:USD.
Eur is maintaing in Exchange rate type EURX.
1) PO (ME21N) is posting for the Vendor on posting date 01/01/2008. Transaction currency is EUR and company code currency is USD and Quantity : 25000
--> Exchange rate 'M' is not maintained for EUR and values are picking from the EURX Type. In the PO, Exchange rate is picking correctly from the EURX table entries on 01/01/2008.
2) MIGO: GR is posted on 01/25/2008 and with 15000 Quantity. Exchange rate is getting currecly from the table on 01/25/2008.
3) MIRO: IR is posted on 02/15/2008 and Vendor Account is picking correct exchange rate from the table but GR/IR account is caluculations EUR:USD is differntly .
Note: It is not GR based IR.
Ex:
PK AC                DESCRIPTION                    Tran Curr (EUR)    Local Curr USD
31 5004789     Vendor Account                       24,718.48-            38,777.12- USD
86 2525000      A/P-GR/IR NON-INV                24,718.48            38,883.73 USD
91 6584785      SERV-OTHER O/S                    0.00                 106.61- USD
Here GR/IR account is cal dirrently.
4) Credit Memo posted against IR on 03/25/2008. Exchange rate is given while posting CM same as Invoice. But system rate is different. Here also how the GR/IR is calculating is question is it not taking from Table or from any other rate types . Same problem like IR for GR/IR account.
Entry is posted like
PK ACC         Description                            Tran curr(EUR) Local curr(USD)
21 5004789     Vendor                                   24,718.48        38,777.13 USD
96 2525000     /P-GR/IR NON-INV                   24,718.48-      38,892.22- USD
81 6584785     SERV-OTHER O/S                     0.00            115.09 USD
This problem is same like GR and also SPL document is posting differenly for ZG and ZL ledger.
ZL ledger is posting same like Accounting CM document ZG is posting with the different amount . This different amount is nothing but the exchange rate as per the posting date 03/25/2008. Exchange rate on 03/25/2008 is differe from IR date 02/15/2008 .
ZL ledger is calculating based on the 02/15/2008 date and ZG ledger is calculating based on the 03/25/2008 . Difference between Exchange rate entered in the CM and 03/25/2008 table entry rate is showing exchange rate difference field in the Addtional field in the document display.
Thanks in Advance.

Dear Friends,
Thanks for your helpful answers, actually we are in big export business. So we have to clear 100s of invoice lines with payments at one go, (which obviously being booked at different dates) so it would be very difficult for the user to go one by one invoice.
My concern is, why system does not calculate exchange rate difference based on actual documents, i.e. Invoice to payments only. I think there might be some configuration needed to implement this functionality.
Please help.
Regards

Exchange Rate difference posting during MIRO posting

Hi ,
We are facing an issue for exchange rate difference posting during MIRO.
PO creation , GR posting & IR posting done on same date. Vendor in PO has different currency than company code currency. Exchange rate maintained in OB08 for this period is taken in PO.
PO value & GR value is same. Due to raw material cost there was price difference posted during GR posting.
(i.e. Raw material cost - GR/IR value = Price difference amount)
During posting MIGO, 3 accounts got posted.
Raw material cost account got debited & offset credit to GR/IR account & price difference account (in vendor & company code currency also)
During posting MIRO, 4 accounts got posted.
Vendor account got credited with GR/IR amount & offset to GR/IR account debit.
Exchange rate difference account got credited & offset to price difference account (in company code currency only)
Since PO creation , GR posting & IR posting done on same date, then why system has posted exchange rate difference account in local currency only during MIRO posting ?
Your inputs appreciated.
Thanks & Regards

Hi,
there is a setting in configuration of logistics invoice verification where you can control the calculation and posting of exchange rate differences. If you had the setting active that exchange rate differences are calculated against a planned exchange rate, that might lead to the kind of postings you describe. Please check.
best regards, Udo

Exchange rate difference KDM in MIRO - cost center used

We have recently testing to setup KDM Exchange rate difference posting in LIV and encounter the problem of cost center cannot be determine for PO with account assignment A (For asset) and P (for Project).
The question is how does the system determine the cost center for the exchange rate different account? It doesn't take the default cost center from the configuration in OKB9 but extract the cost center from PO Account Assignment - for Asset Account assignment, there is no cost center in PO and thus it is giving a error of 'Field Cost Ctr is a required field....'
Any help appreciated.

Dear Murali: Yes, GL account is maintained in OBYC for KDM transaction, I am following the OSS note 980402 for the setup (ECC6 system). The GL account say is 60000005. In OB09, we have maintained the entry for this account 60000005 to have a default cost center (e.g. 1000). This cost center does not get defaulted when MIRO posting is done with exchange rate difference. Instead, the cost center is obtained from the PO (e.g. the account assignment in PO have cost center 5000). But for certain account assignment (e.g. 'P' for WBS and 'A' for Asset), there is no cost center maintained in PO account assignment and thus in MIRO i get an error message as mentioned above.
Dear SAPFICO: check the asset master also, althrough there is a cost center in Asset Master, it does not get extracted into MIRO postings.

Exchange rate difference posted to Group currency only during MIRO

Hi SAP Gurus,
We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
OB22
Crcy Type 30    Group currency                               Currency   USD
Valuation        Legal Valuation
ER Type    M     Standard translation at average rate
Srce curr. 1     Translation taking transaction currency as a basis
TrsDte typ 3     Translation date
Please find below scenario:
Co code currency: ZAR
PO: ZAR
Upon GR:
Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
          credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
Upon IR:
Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
          credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
Here are my questions:
1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
3.) How?
I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
Appreciate your help. Thanks!
Regards
Dru

Just an update to this issue- I just found out that the system is pointing to KBS when posting the
exchange rate difference in group currency upon IR, hence, PO account
assignment is adopted. I'd like to rephrase my question- is there any
way we can change SAP behaviour such that it will point to other
transaction key (e.g. KDG) other than KDM? Bottomline is we want it
charged to other GL account not the one in the PO.
Thanks so much for your assistance.
Regards,
Dru

Exchange rate difference posting deactivate in MIRO

Hi
Exchange rate difference posting is active, I do not want
to post to this account, How to deactivate this.
Shoudl i change in the config under invoice verification - How to treat exchange rate diff ? will it create any other problem ?
Pl Suggest.
RRS.

Dear RRS,
Please note following things
To enter invoice in foreign currency following settings must be done in SAP system.
1. You must have defined the currency you are using to enter the invoice
2) You must configure an exchange rate of foreign currency & local currency in customization
3) You can define diffrent rate for diffrent time period
For a PO in foreign currency you can decide whether the rate from the PO to convert the foreign currency to the local currency at GR or IV.
If you fix exchage rate in PO then you can change it at GR or IV.
If the exchange rate is not fixed the system uses the current exchange rate at GR.In IV the system also suggest the current exchange rate as exchange factor but you can change it.
Reward if useful,
Vivek Maitra

Exchange rate difference posting in parallel currencies

Hello experts,,
We are on ECC 6.
When we enter an invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
Is this a standard feature / behavior? If so, where can i find the settings.
Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
The material ledger is not active.
We have maintained 3 different currencies.
Example to illustrate -
DC = JPY
LC = SGD
GC = USD
PO for asset.
PO value = 10000 JPY
Ex rate not fixed in the PO.
Ex rate at PO -
100 JPY = 1.6 SGD
100 JPY = 0.85 USD
Ex Rate at IR
100 JPY = 1.7 SGD
100 JPY = 0.9 USD
When IR is entered,
The exchange rate difference of 10 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 5 USD).
At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 5 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
Thanks in advance for your advice/solution.
B. Regards,
Halaswamy

Hi,
Check in t.code: OB22. the 'source currency' used for translation in . There are two options:
1 Translation taking transaction currency as a basis
2 Translation taking first local currency as a basis
Also check the notes:
335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy
526623 Different treatment of local and parallel currency in ML
Regards,
Biju K

Treatment of exchange rate difference in MIRO

Similar Messages

Maybe you are looking for