Treble & Bass Controls For SoundMAX Sound Card?

Hi. I have a T61 with a SoundMAX Integrated Digital HD Audio sound card. Just wondering if there is any way I can adjust the bass & treble controls. I have confirmed I have the most recent drivers, and when I do Control panel > Hardware and Sound > Change System Sounds > Playback Tab > Highlight Speakers SoundMax Integrated Digital HD Audio and select Properties, I only have 3 tabs - General, Levels and Advanced, and none of them have anything about bass & treble.
Thanks,
Bill

Hi!
I just bought a used T60 also with a integrated Digital HD sound card. Sound/Audio is working. Problem is: The audiomixer shows control-sliders for Bass and Treble. But they are greyed out and both set to minimum. Result is: The audio sounds pretty low/poor - nearly unusable. To make it work I need a solution to increase the Treble Slider or the Treble itself to a higher value.I have confirmed I used the most recent drivers. OS is: Windows XP Prof Ver. 2002, SP3.
Thanks in advance
Josh

Similar Messages

Unable to find driver for realtek sound card

hi iam having HP Pavilion Media Center a1320in Desktop PC.. iam unable to install driver for my sound card.i got driver from hp website but while installing a msg gets popup. it says install Microsoft uaa bus driver for hd audio. even in device manager-system devices i cant find MS UAA hd audio. 1 unknown device its shows in device manager. bcoz of that i purshased a new sound card. help me pls.... os - windows xp pro sp3.

hi paul . i just installed the above two softs. but nothing happend. kb888111 is for xp sp2. so it will not get installed in sp3. bt i made small changes in registry and installed it. even i installed 2nd soft realted audio also, u can find my comp specification over here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00590356&tmp_task=prodinfoCategory&lc=en&dlc=en...〈=en&product=1823355 iam using xp sp3. in my device manager-system devices- i cant find microsoft UAA....... and i think thats the problem. every time i install driver for realtek audio(got from hp website), it ask me to install MS UAA bus driver. what to do now..

Need fix for soundmax audio card for my HP touchsmart 300 series running windows 7 64 bit OS

need stereo mix in my soundax controls in order to DJ with my new pc...so far I can only find fix for Vista and XP 64 bit which after download has stereo mic option...can you help?
annie

try external USB sound card option, m-audio or creative are a couple off the top of my head you could use. they usually come with a full driver and product suit that can achieve a much better sound than the soundmax in touchsmart have to offer.
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Individual Bass Control for Front/Rea

Hey everyone!
I was wondering if it is possible to control the bass and treble settings for each output on my soundcard individually, ie: the front and rear speakers.
The reason I ask is because I have really nice speakers connected to the rear output, and really poor ones connected to the front output. The really nice speakers are home-made and hooked up to an amp, which is in turn connected to the rear output on the soundcard. The only problem is, the bass and treble settings (along with a few other things) are broken on the amp.
The front speakers are okay sounding normally... except now with the bass/treble broken on the rear speakers I must adjust bass/treble using AudioHQ, which makes my rear speakers sound great... (which is why I adjust them in the first place) but now my front speakers sound like s**t!! My rear speakers are far more important than the front but it is also important I have surround sound. (It might not be 5., but 4 channels is still surround sound!!)
The front speakers have limited bass control... but it only controls the bass for the sub, and when I adjust the bass in AudioHQ the sattelites become all distorted. I theorized the only way to fix this would be to get another amp or to find a program or utility that will let me adjust the bass and treble individually for each channel. Buying a new amp is not an option, which leaves me with the former. (I just don't have the money for a new amp, or front speakers for that matter)
Please help! :S

Bump. Anyone?

Audio/Bass Control For Mac Mini

Recently bought a new Mac Mini and I have an old Logitech Z-5300 speakers attached to it. Is there anyway to turn the bass down through the OS? I have the bass turned down to 0 on the speaker unit itself and the bass volume is still coming through very high and I need to turn it down so I don't disturb my neighbor in the next room. Thanks.

Glorius wrote:
I am also searching for a solution to adjust the bass on my mac. But there seems to be really no solution for it on the Apple computers.
For music playback, iTunes provides an equalizer.
If you want a global control for this, unfortunately there is none.
If this is important to you, one solution would be to use an outboard hi-fi stereo equalizer.
I am completely disappointed!!! This will be my last mac computer!!!
If you honestly believe this one drawback to the Mac negates all the positive aspects of the platform, then you'll be happier as a Windows user.

Recommendation for good sound card for test & measurem

There are quite a lot sound card based oscilloscope, spectrum analyzer, signal generator softwares, such as multi-instrument?. An ordinary?sound card?can only measurement signal within 20Hz~20000Hz range (with flat frequency response),? I would appreciate it very much if anyboday here could recommend a sound card that can extend the above frequency range as?wider as possible, towards both the lower end and higher end.

Such software is pure bullhit, because every soundcard has its flaws, wich will render the results unuseable. And the next point: most soundcard- drivers and the OS itself are changing the signal in a different manner. Maybe vollume boost, or reverb effects, some signal changing to get better results in terms of audio quality and signal clarity, and so on. Get a Oscilloscope. Maybe you will need to sell your house for a good one, but this is the only good solution ^^?The best soundcard for this purpose is not a real soundcard, but a recording card. There are some expensi've models out there, especially terratec or EMU. (I dont know really if EMu is selling REAL recording cards)Message Edited by fffcmad on 0-5-20082:24 PM

Kx-project driver for creative sound card to 2k3 as a workstat

Hi Everybody
maybe it also if you run as it is build to as a server i don`t no but i have use it since Februar this year with no problems at all ! here is the link :
http://kxproject.lugosoft.com/index.php?skip=
and here is the full list with all supported creative sound card and maybe other sound card to who no?s and the FAQ !
http://kxproject.lugosoft.com/faq.php?language=en#cards
Best regards
audiogy2newbieMessage Edited by audiogy2newbie on 06-2-2005 2:6 PM

Information is scarce for end of service life products, you might want to read about the specs here. Alternatively you might want to consider this model instead but you may need to do some searching since it's not available in the UK online store.

Driver for Creative Sound Card Model no: SB0

Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx

samram wrote:
Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
SB0680 : Creative Sound Blaster 5.
http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
Maybe you can install these drivers/software.
jutapa

Looking for a sound card

I managed to break my minijack audio-in and can't record anymore. I get static/humming from my speakers right now and I'm considering buying a new sound card (with some 1/4" audio-ins and midi and Mic input hopefully).
I have a G4 with Mirrored Drive Doors, purchased in 2004.
Does anyone know what types of sound cards will work with my machine/ what specifacations I need to look for?
I've never purchased anything like this and don't really know where to start researching.

I'd second WWJD's recommendation. A digital coaxial cable goes to my Onkyo receiver from my Quicksilver - iTunes never sounded so good...!
ken
G4 867MHz 1.1Gb RAM Mac OS X (10.3.9) IOGear USB 2.0 card, ATI Radeon 9000, Audiophile 2496, SIIG SATA card, Western Digital 200 GB HD

Can't find the proper drivers for my sound card

Hello.
I have a Satellite R25-S3503 whose hard drive recently crashed. I bought a new hard drive, installed it, and am trying to find all of the drivers necessary to get it back up and running. The sound drivers listed on the support site do not appear to be the ones I need. I installed the Realtek HD driver and the Toshiba Virtual Sound and I have sound ; however, I cannot control my audio with the external switch and when I plug in my headphones, they are recognized, but sound still comes from my main speakers. I am not sure what else to try at this point and I cannot seem to find my restore CDs.
Any suggestions would be appreciated.
Thanks.

Satellite R25-S3503
The sound drivers listed on the support site do not appear to be the ones I need.
This is the one that doesn't work right?
Realtek HD Audio Driver for Windows XP
-Jerry

Copy control for passing Credit card information from VA01 to VA41

Hi,
Is there any SAP Standard copy control available for passing the credit card information from Sales order Creation(VA01) to Contract Creation(VA41).
Thanks,
fractal

Hi,
Check in transactin VTAA, this might be helpful,
Rgds,

Global volume control for all sounds in a swf

Does anyone know of a way to adjust the volume of all the sounds in a swf? I'm looking to build a volume controller that changes the audio level of the swf.
Thanks!

I used:
SoundMixer.soundTransform = new SoundTransform(0);
and that mutes all sounds in my swf.

Base control for sound card

Hello, am I missing something. Is there a way to easily reduce the base in attached speakers? I cant seem to find any settings for the sound card. THank you!

There is a third-party shareware utility, Hear, that provides a system-wide equalizer. However, there isn't a built-in feature to OS X other than volume. iTunes does have its own separate equalizer.
You can find Hear at VersionTracker or MacUpdate.

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Need sound card driver for Win 7

I have recently bought a used computer with Windows XP and loaded Windows 7 on it, but apparently when I was downloading Windows 7 it erased the sound card and now I have no audio.
Before I loaded Windows 7 I +did+ have sound, and I had tested the sound out on a preloaded game.
I have tested out the sound on multiple videos on YouTube after downloading the program, but there was no sound. The little speaker on the bottom-right of the screen had an x over it, which is unusual, so I went to the Control Panel and found that I had "no audio output devices installed".
Where can I find a virus-free sound card download? (Preferably one by Microsoft, and if possible, free)

If your problem is anything other than you have installed W7 on a laptop that Toshiba don't support for W7 (check Download Drivers at the top of this page) then I'd like to know W7 32 or 64 bit, laptop model and what device manager shows for your sound card.
There is a thread running in the Satellite P series board on sound + p100 + W7

Treble & Bass Controls For SoundMAX Sound Card?

Similar Messages

Maybe you are looking for