Tree branches about to snap line

In the last couple of months broandband speed has dropped and line has a crackle. On way home today i noticed some branches on the bt line which is streching the line downwards its only a matter of time before thsy snap through. i was wondering if there was a number or site to report this???
Solved!
Go to Solution.

Hi
You "may" have problems reporting trees on the wire, BT no longer actively undertake tree cutting do to the legal ownership of the trees.
I believe they normally ask the customer if they know who may well own the trees and then ask the customer to talk to the owner.
Any trees touching the wires that are on your property I am afraid you would be responsible to have cut back.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

Trying to photograph a sunset through tree branches, but camera won't focus properly

I have an SX50HS, am trying to take a zoom shot of the sunset through tree branches, but the camera will only focus on the branches...trying to get the sun in focus
Solved!
Go to Solution.

Normally, I use the Manual mode of the camera. What I usually do is to put the camera in manual focus mode and set to infinity. You might also try setting the metering to spot meter. Make sure you are using a high enough shutter speed to avoid camera shake, and use an aperature of around f5. Too wide of an aperture (f2.0) will also blur the background, so keep the aperture to a higher number to keep everything focused. (smaller aperture).

Tree Matrix Report with double line heading

Hi,
I am very new to HTML-DB and HTML as well.
I need to create a matrix report with a tree functionality and with two line heading.
Basically This is what I need to generate
REGION1 REGION2 REGION3
COL1 COL2 TOTAL COL1 COL2 TOTAL COL1 COL2 TOTAL
===========================================================
CAT1+
Sub_CAT1
Sub_CAT2
CAT2+
Sub_SCAT3
Sub_SCAT4
Where CAT1 , CAT2 needs to be collapsible rows. SCAT1..SCAT4 are sub categories under main categories.
REGION1.... REGION3 are top level headings. And COL1,COL2 are sub headings under top level headings.
Thanks,
Shri

Please help me on this!
Thanks,
Shri

Too hard to use Roto Brush in Tree Branches!

Hi all!
I'm having trouble roto brushing tree branches, it's too difficult, is there any alternative way or color selection option in Roto brush?
Thanks in advance!

Colorama is a plug-in that easily creates a track matte for things like trees against a sky. An additional junk mask and your work should be almost done. Just use the negative preset and then do some tweaking like this:

Style a tree branch selectively

Hello,
I have an XML structure as follows:
[Bindable]
private var tempDataSource: XML = <root label="root">
<element label="apple" current="false">
<sub label="one"/>
<sub label="two"/>
</element>
<element label="pear" current="true">
<sub label="alpha"/>
<sub label="beta"/>
</element>
</root>;
I link the data to a tree as follows:
<mx:Tree dataProvider="{tempDataSource}" showRoot="false"
labelField="@label"/>
I would like to programatically change the style of the tree
branch item
pear to bold say using the attribute
current==true condition, but I don't know how to apply a
style to a single element in a tree. Apologies if this is a
no-brainer, but the answer eludes me.

jlingwai, you're a champ. Indeed a custom renderer was the
answer I needed. My solution, following on from my previous
posting, ends up like this...
Create a custom renderer based on TreeItemRenderer like so:
// filename: customRenderers\MyTreeItemRenderer.as
package customRenderers
import mx.controls.treeClasses.*;
import mx.collections.*;
public class MyTreeItemRenderer extends TreeItemRenderer
// Define the constructor.
public function MyTreeItemRenderer( )
super( );
// Override the updateDisplayList() method to set the text
for each tree node.
override protected function updateDisplayList(
unscaledWidth: Number, unscaledHeight: Number ): void
super.updateDisplayList( unscaledWidth, unscaledHeight );
if ( super.data )
var state: XMLList = new XMLList( TreeListData(
super.listData ).item );
if ( "true" == state[ 0 ].@current )
super.label.text = TreeListData( super.listData ).label + "
(current)";
setStyle( "color", "blue" );
setStyle( "fontWeight", 'bold' );
Then just assign the renderer to the Tree component and
Robert's your father's brother.
<mx:Tree dataProvider="{tempDataSource}" showRoot="false"
labelField="@label"
itemRenderer="customRenderers.MyTreeItemRenderer"/>
So enjoy the moment as I am.

Move recursive nodes (tree branches)

Hi experts.
I have a table with a nested tree and therefore a context structure with recursive nodes.
Is there a convenient way to move whole sub-branches including child nodes (and their child nodes).
When I just move the selected element by create & remove, all child nodes are lost.
Any idea to solve this in a good way?
Regards, Karsten

Hi,
I'm unsure how long this post will be on the forums, but here it goes.
Yes, customizing ADF in any way requires a lot of time.
ADF is build with the concept of less coding and more drag and drop. The framework tailored specifically to this requirement.
This means that if you use ADF, you must be willing to change business requirements if ADF does not easily allow you to implement them.
This is of course true for almost any Framework, but for ADF it is really extreme.
I need to go back to the business a lot when working with ADF, explaining that if we change this requirement development is a lot easier and that sometimes I'm even unsure if I can make it work in ADF.
But that said, most of the screen WILL work with basic drag and drop and minimal backing beans, ADF is worth it then.
If people try to convince you, you do not need to code at all with ADF, just ignore them.
They have never work on a real commercial project with real customers, simple as that.
On your question, I believe I did something similar in ADF 10.1.3, but I cannot find the code atm.
But yes, use the native Trinidad components, forget about the bindings for now, bindings will only make your time a lot harder.
Work with the underlying app module and the view objects directly.
There is no reason this should not work, but yes you will bypass the binding layer.
When I have to customize something, I start by checking if the ADF components allow me todo something declarative, this is hardly ever the case.
I changed to backing beans really fast, then I try to use the bindings, but I never spend much time on this and go directly to the underlying app module.
-Anton

Tutorial for drawing tree branch

I am tracing a tree. I was wondering if anyone has seen any tutorials on how to draw vector trees and branches?
Please help! Thank you!

Just for the fun of it/ I started one myself. When I was in kindergarden I use to love to do this drawing and then add the leaves. One by one and my teacher thought that was very Japanese like and then showed me how to create the idea of volume by using variation in the colors to make shadows.
She showed me a lot even though she wasn't an artist herself she loved art and was a wonderfully inspiring person.
At any rate it takes tie i would say about an hour to draw the whole tree maybe two.
If you need more branches you can easily add the them by using the scissor tool and then add the branch with the pen tool.
I hink drawing by hand is the best and i would not try in this case to trace anything, a little patience with yourself and it will be a unique piece.
I think I will finish this just for the fun of it and keep it around.

I have a Macbook with 10.5.8 OS on it. It is a daul boot with Wondows XP. Everytime I type in word or Outlook on the PC side the cusor is jumping around. It jumps up about 4-5 lines. Does any one have a solution?

I am having probelm with my Macbook with dual boot to PC - XP. when I am typing in Word or Outlook the cursor is jumping up 4-5 lines or it will clear the text I have typed.Someone suggested that I lower the sensitivity of the trackpad but that didn't work. Any possbile ideas would be wonderful- it is driving me crazy....

greytdogs wrote:
Any advice to a girl who understands very little about computers would be greatly appreciated.
Have someone look at your machine, discuss upgrading the operating system to 10.6.8 as it will run all your currently installed software (10.7 may not and require more memory, new software purchases)
Also to set up a TimeMachine backup system too.
We can only help those who can help themselves, some need someone to assist them in person.
It's no problem, I don't do my own dental or car work, I turn to those who can assist me with that.
Good Luck

Still getting conflicting answers about upgrading a line to smart phone

A the risk of incurring the ire of some people, I simply feel compelled to restate my question about converting a basic (existing line) phone to a smart phone after 6/28. My question is sincere not asked in a cynical way, and I am still unsure of the answer because of differing answers even within the official ranks of verizon. I understand all the elements of the 'awesome' new share plan (even though I prefer to avoid it for now). So, if anyone knows where to find the specific documentation that refers to this would you please offer links to said documents. Direct answers, even from people who Identify themselves as support personnel (here in forums) have as recently as yesterday, been shown wrong. While I offer thanks to anyone just for the effort of replying I would prefer authoritative responses, and here again, individuals have (as often as support reps) given accurate answers. Simply stated once more I would like to know "When I need to upgrade my daughters phone In AUGUST, from a basic phone to a smart phone will verizon allow me to purchase the phone upgrade AND add 2gb data package for 30$". There would seem to be no ambiguity in the question, however in the face of opposing answers it just defies logic . The ONLY reason I am confused is because verizon reps have at been odds with each other. Documents are more reassuring and if anyone can offer links I would appreciate it. I have even considered acquiring a phone from outside vzw but had been told even that avenue would not allow me to add a data package to my EXISTING account. Truth oh truth how illusive thou be.
P.S. strictly for the sake of discussion, I will say that my viewpoint of the low quality of VZW customer service reflects this and other instances of inaccurate and false answers from this company. They just get it wrong too much to have a high rating from me even though others may have had different experiences.

http://solutions.vzwshop.com/shareeverything/?intcmp=VZW-VNT-SE-PLANRECMND
Scroll down to "tell me more". Last question. "I have an unlimited data plan on my account. Do I need to change it?"
"You're not required to move to Share Everything but if you do, unlimited data will not be retained on your line. As a Verizon Wireless customer you have choices when you upgrade at discounted pricing. You can choose from a standalone data package starting at $30 for 2GB or a Share Everything Plan. If keeping unlimited is important to you, you can choose to upgrade and pay full retail price for the phone."
I imagine that this would be the same as upgrading a basic phone to a smart phone. You can add a data package to the line you are upgrading (that it currently does not have) and it won't affect the unlimited on your Droid's line(s). It's only when you try to upgrade the lines that currently have unlimited that you won't be able to keep the unlimited data. You can choose to move everybody on the plan to a shared data plan, or move to a tiered data plan. You just can't keep unlimited when you upgrade at a discounted price.

How to draw a graph of tree structure (using shapes and lines)?

Hello,
I tried to search this solution in the forum, and I see people asking and replying with solutions to similar situation, but I don't get what I am looking for. Also because I have never tried with graphs before.
So, my problem is, I need a function that takes a string with tree structure, as in automata or tree graph, and displays the nodes in tree form. "Tree" is not important, but important is that each object should be displayed as a node and lines connecting them. Please see the image below (with three possible options):
So, basically, the tree structure could be like X(a, X(a,b), c) where X(a,b) is a sub-tree of higher level X. The program knows the parent-child relationship, so this function only needs to display those elements in a graphical fashion.
I pass the string in the form of a 2D array showing the hierarchy (to simplify).
In the image, I am showing three possible options for showing the tree. The third option eliminates those circles and rectangles, if that simplifies.
I hope I explained clearly.
Thanks ahead!
Vaibhav

I would start drawing from the top. The nodes will be the easy part.
Begin with the root node centered in the drawing area horizontally and against the top of the drawing area. The second row of nodes would be located vertically (as in my example) 1.5x pixels below the first one, and either distributed horizontally across the available drawing area or at a fixed distance - like 1.5x again, or someother distance you define.
The tricky part will be drawing the lines since they need run between the edges of nodes. This is where the high-school geometry might come in.
Keep us posted on what you come up with. Extra points for coming up with a solution that will automatically resize itself to fit the available drawing area! (I've already given you all the clues for how to do that too.)
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Trees need cutting back..lines stretched out

Have a major issue on public easement, going to lose a 1.5" line due to trees layin on them, comcast is below.... Called FPL said your problem. {edited for privacy} you are having a major issue with overhead lines. tryin to save yall a 100k bill

Hello sscottmann1,
This community is meant mainly for peer-to-peer support. Have you contacted customer service directly through Contact Us?

Need details about the Snap to Grid function

I wanted to repair a problem in a guitar track, So I opened a new track and recorded over the problem. I though that with the Snap to Grid function I could slide the new version on the old track without having to worry about the region moving horizontally. That's what's happening, it is impossible to move the track without changing the timing of the track.
Is it normal?
Thanks in advance

Install freeware hardware diagnostic software like for example SANDRA Sisoft, Everest Home Edit or HWiNFO32.
Such tools provide you all essential information about the built in parts and the HDD controller.
Please post some feedback would be interesting to know what SATA controller details would be reported by such tool.

Question about adding a line/phone to a new plan

Hey everyone I have a concern I wanted to be clear about before I upgrade my plan. I am up for a device upgrade and plan on upgrading my smartphone and my current single line plan to one of of the new share everything family plans and a new smartphone. I can get the phone I want at a different store other then verizon for a better price so Im going to do that. After that is all said and done I plan on buying and adding another new smartphone/line to my share everything account through verizon(store or online). I just want to be sure that 1.) Adding another line after the fact isnt going to be a problem fee wise or the terms of my account wise since I just upgraded my account at a different vendor and 2.) Will that new line be still eligible for a upgrade discount through verizon just like a new plan would be even though Im not adding it at the same exact time I upgrade my main phone and plan?
Also I was wondering that if..say a few months from now I want to add another new phone/line to my share everything account. Will that also be like a new plan and eligible for a upgrade discount through verizon? My 2.) question will probably answer this but I want to be absolutely sure first before I do anything. Thanks alot guys. Appreciate any input.

scottm79 wrote:
Hey everyone I have a concern I wanted to be clear about before I upgrade my plan. I am up for a device upgrade and plan on upgrading my smartphone and my current single line plan to one of of the new share everything family plans and a new smartphone. I can get the phone I want at a different store other then verizon for a better price so Im going to do that. After that is all said and done I plan on buying and adding another new smartphone/line to my share everything account through verizon(store or online). I just want to be sure that 1.) Adding another line after the fact isnt going to be a problem fee wise or the terms of my account wise since I just upgraded my account at a different vendor and 2.) Will that new line be still eligible for a upgrade discount through verizon just like a new plan would be even though Im not adding it at the same exact time I upgrade my main phone and plan?
Also I was wondering that if..say a few months from now I want to add another new phone/line to my share everything account. Will that also be like a new plan and eligible for a upgrade discount through verizon? My 2.) question will probably answer this but I want to be absolutely sure first before I do anything. Thanks alot guys. Appreciate any input.
Every time you add a line, it is eligible for a subsidized phone. It does not matter when you do it. As far as question #1, your account is just what the terms of usage is, not the length of the contract(s). Those are determined by the individual lines. You can also change the account limits at any time (eg. increase shared data limit), but when you do, it is usually pro-rated for the remainder of your current billing month, plus 1 month in advance. It does not change any of the lengths of the lines contracts.
Does this help?

Forms on web Hierarchical Tree control does not expand lines

running forms 6i on windows client-server mode HTree control works OK,
but with developer server on Unix
HTree sometimes does not expand lines properly (usually at the bottom of htree control) and after such situation form is stacked
Icon usage does not make a difference.
If I will expand the whole tree at startup it seems to be working fine, but I want to show it collapsed.
Please help.

It doesn't sound like this is the answer in your case, but here is a problem I had with tree icons in 6i which took me a while to figure out.
For some unknown and probably pointless reason, forms converts the tree query to uppercase before executing it. This can cause problems if the sql contains any hardcoded strings. In my case I was doing something like
decode(status,1,'red',2,'green')||icon_name
this resulted in REDicon when my icon was actually redicon.gif

Want to learn more about the command line for Mac OS X

Hi, I'm kind of new here...I've been using my MacBook since last summer, however I want to really get a feel of the command line and would like some recommendations on how to learn more about it.
Looks like it is based off of BSD, and I've been using Linux for about 10 years now and also have a CompTIA Linux+ cert, however some of the commands aren't the same.
So, if anyone can post some websites/recommendations that would be great.
thanks

Buy any one or more of the many books available at Amazon.com about Unix under OS X. Linux and Unix are related but not the same. Even FreeBSD Unix is not the same as what's implemented under the OS X hood.
And you will find other good books at PeachPit.com.
There also is a separate Unix forum here.

Tree branches about to snap line

Similar Messages

Maybe you are looking for