Tree Control ActiveX and the Runtime - help...
We've build a BridgeView application that lets you select past datasets
using a tree control. It works fine when the BV development system is
installed, but when we remove it and replace it with a Run-time
version, the control is no longer visible or active....
TIA,
Thor Johnson
[email protected]
www.advance-it.com
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
Thanks for your answer. Unfortunately I am stuck to Labview 7.1 for other reasons and the defer front panel updates only improves my numbers by a 30% which is not enough as already mentioned by the post you refer to. Sadly enough the 'add multiple items' method is not available for the same string control in Labview 7.1. Maybe I should investigate further in the Active X area...
Christophe
Similar Messages
-
Firefox hangs with an error message something like - Script not complete or still running.
I cannot uninstall Firefox with the uninstall program routine in the Control Panel and the Mozilla uninstall helper.exe program will not run either. How do I completely uninstall Firefox so I can make a clean reload?
== This happened ==
Every time Firefox opened
== Not sure but I think it was after the updateThanks for the reply.
I am very new to these forums (or is it fora?).
I didn't know there was a Tomcat forum.
How to I find it.
Ta much & best regards,
Pete -
How do I compress a file on a Mac. I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer
Select the file with one click, then go to File in the menu bar and select Compress...
By the way Niel's post says control - click. This means click with the control key held down. It produces the same result as going to File in the menu bar and selecting Compress... -
I am trying to download video from the BBC iplayer and the download helper will not start. How do I get it to start?
No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key. -
mozilla starts opening pages like crazy none with any info only say loading but nothing happens and the microsoft help panel starts to appear and freezes the comp even when i uninstalled mozilla the windows help panel continues to appear even if i end task from the process panel in the task manager it continues to appear and freeze the comp after a while it started to get back to normal i installed mozilla again thinking that it was a temporary glitch but it started again after a few hours. i uninstalled mozilla again but cannot get rid of the popping windows help panel help!!!!!
Did you choose to open a specific link in Firefox when you got an "Open with" download dialog?
See:
* [[Firefox keeps opening many tabs or windows]]
* "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions -
Re-create Tree control drag and drop move
Hello,
Ive got a tree control where dragEnabled=true and I have
custom handlers for dragEnter, dragOver, and dragDrop so that I can
drag/drop from datagrid's to the tree and it works fine.
The issue is now the built in tree functionality for moving
nodes around within the tree is gone. When I set dropEnabled=true
it breaks the ability to drop from the datagrid to the tree.
How can i keep the ability to move tree nodes within the tree
and also be able to drag and drop from a datagrid onto the tree?
Thanks for any help!While doing more testing I found the solution.. seriously...
dont know how I should have known this one...
on Tree dragOver handler:
if( from.id == 'data_grid' ) event.preventDefault(); -
How to design a listbox or tree control related to the database
Now i have a problem to design a listbox or tree control, it is designed to connect to the database, if the related element in database changed, the element in listbox or tree control should also change. i have managed to read the element in database, but i cannot input it to the listbox or tree control, since it has no input terminal that i can only use the Labeling tool and enter text into it.
is there any advise on it, maybe i can use another control rather than listbox or tree control. any suggestion would be appreciate.
Thank you
XuYHi Xuy,
On the front-panel, right-click on the text-ring control and select: Create\Property Node.
Then, on the diagram, right-click on the property-node and select "Strings[]".
The "strings[]" property is the array of strings available in the control - and you can change it.
Cheers!
Message Edited by tbd on 04-05-2007 11:18 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
RingStrings.jpg 6 KB -
I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
I am trying to use the "This solved my question - 10 points" an the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?
Are you talking about the "Legend" panel at the right of the window?
Those text are just help texts explaining the reputation points. You can only award points, if you are the original poster of a question. Then you will see active buttons to award points below the answers you receive. See here for more information: https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards
Léonie -
Help!
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with
Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I Have a Sony vaio laptop a ipod touch and a new ipad but cant sync from the laptop because the itunes is too old a version.
I have tried to uninstall itune from the control panel to enable me to reinstall the latest version but wont let me as it say to contact apple support does anybody have any good idea what to do?I have tried to uninstall itune from the control panel to enable me to reinstall the latest version but wont let me as it say to contact apple support
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.) -
Unable to connect control center and start runtime service
Hi guys,
I have owb 10gr2 in my server with repository ods_repo .
last time when runtime service was working fine that time service name ods is registered.
Now when our service name is changed from ods to odstest , from that day i am unable to start runtime service and unable to connect control center service.
I ran following owb script ...and got error in connection
SQL> @E:\SCRIPTS\important_files\owb_scripts\service_doctor.sql
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
There is a problem with the repository connection information used tostart the service
Here is the detailed error message which contains the connectioninformation passed to the service:-
Cannot connect: user=ODS_REPO host=150.2.0.244 port=1521service-name=ODS
Please verify that this information is accurate
If this information is correct, then please use the'set_repository_password.sql' script to reset the stored password
Is there any file where this connection information
ODS_REPO host=150.2.0.244 port=1521
service-name=ODS
stored so that we can change the service name.
I ran start_service.sql script also and got same error.
plz reply and mail also on [email protected]
as soon as possibleHi sir,
The Actual problem is in our database the service name has been changed from ods to odstest.
After this changes I was unable to connect our repository ods_repo which was using ods as service name then I tried and able to connect .
Then next problem came with control center that was not able to open it. Then after update some tables using update stat specify above reply.
After update I was able to open control center then finally the new problem is location.
I need to edit the location information with new service name so that I can access the repository and tables and can use them in design center.
That’s why I am trying to un register first then edit the service name then again register….<I am unable to do this thing>
I am getting following error when I tried to unregister the ods_target_loc location .
Error : rtc-5320 : location ods_target_loc has not been registered by the current user.
And after using the script getting this
SQL> @E:\oracle10g\oracle\product\10.2.0\OWB_Oracle102_home\owb\misc\unregister_location.sql
===========================================================================
WARNING:
This script should be used ONLY when a location cannot be unregistered by using
OWB UI or Scripting. This can happen when the Control Center/Runtime Repository
where this location was registered is crashed, or deleted, or just cannot be
reached any more.
===========================================================================
Enter Location Name (ctrl/c to cancel): ODS_TARGET_LOC
Location ODS_TARGET_LOC is registered in this repository.
Please use OWB Client UI or Scripting to unregister this location. -
ActiveX and the Web: The Inside Story
Am I right in believing thusly:
I am a financial analyst who's looking for the current foreign
exchange rate for various currencies every second moment. For this I
always telephone Phil de Lucre, the brokers and dealers of the forex
markets. They now have a website where I can logon and get the rate
online. Cool, I think.
I type the URL of their website, which looks like
http://www.ForexRatesOnYourTips.com/Calculator.asp, and lo! I am
greeted with a page that says, choose the currency for which you wish
to compare the rate against the Indian Rupee (INR). That makes me
happy. Then they have a textbox that says, now enter the amount in
Indian Rupees (INR) whose equivalant you wish to see in the foreign
currency. I enter Rs.100. "Good", I am thinking. Then I hit a button
captioned "Get me the darn rate and make it quick!".
[BEHIND THE SCENES]
Phil de Lucre created one ActiveX DLL called Foo that knows exactly
how to convert exchnage of one currency into another. Foo proudly
resides on the web server of Phil de Lucre and brothers. Mr.Mone Flee,
the programmer at Phil de Lucre, commands in VBScript,
Dim ObjFoo
Set ObjFoo = Server.CreateObject("Lib.Foo")
And magically so, an object of the wonderous Foo is instantiated on
the web server. The web server reads requests made by my browser's
button "Get me the darn rate and make it quick!" and passes it on to
Foo in the Foo language. Foo, like it were a child's play, ardently
returns the rate converted to the web server. The web server whips
HTML out of it and displays on my page, the much coveted rate.
[/BEHIND THE SCENES]
Makes me happy. Is this all about how ActiveX DLLs work in ASP? If I
am right, let's proceed with a case of an ActiveX control. How do they
work?
Let's warp the scene a bit. Foo is not a COM DLL, but this time with
version 2, its just got a bit smarter and dainty with a dazzling
interface. It is now reborn as an ActiveX Control, and all the people
at Phil de Lucre make love to celebrate the new avatar.
When I hit the "Get me the darn rate and make it quick!" button this
time, what happens? No no! More importantly, I beleive something
happens even earlier, the moment I type
http://www.ForexRatesOnYourTips.com/Calculator.asp, right?"Sathyaish" wrote in message
news:[email protected]...
> Am I right in believing thusly:
>
> I am a financial analyst who's looking for the current foreign
> exchange rate for various currencies every second moment. For this I
> always telephone Phil de Lucre, the brokers and dealers of the forex
> markets. They now have a website where I can logon and get the rate
> online. Cool, I think.
>
> I type the URL of their website, which looks like
> http://www.ForexRatesOnYourTips.com/Calculator.asp, and lo! I am
> greeted with a page that says, choose the currency for which you wish
> to compare the rate against the Indian Rupee (INR). That makes me
> happy. Then they have a textbox that says, now enter the amount in
> Indian Rupees (INR) whose equivalant you wish to see in the foreign
> currency. I enter Rs.100. "Good", I am thinking. Then I hit a button
> captioned "Get me the darn rate and make it quick!".
>
> [BEHIND THE SCENES]
> Phil de Lucre created one ActiveX DLL called Foo that knows exactly
> how to convert exchnage of one currency into another. Foo proudly
> resides on the web server of Phil de Lucre and brothers. Mr.Mone Flee,
> the programmer at Phil de Lucre, commands in VBScript,
>
> Dim ObjFoo
> Set ObjFoo = Server.CreateObject("Lib.Foo")
>
> And magically so, an object of the wonderous Foo is instantiated on
> the web server. The web server reads requests made by my browser's
> button "Get me the darn rate and make it quick!" and passes it on to
> Foo in the Foo language. Foo, like it were a child's play, ardently
> returns the rate converted to the web server. The web server whips
> HTML out of it and displays on my page, the much coveted rate.
> [/BEHIND THE SCENES]
>
>
> Makes me happy. Is this all about how ActiveX DLLs work in ASP? If I
> am right, let's proceed with a case of an ActiveX control. How do they
> work?
>
Yes, you are right! There are *some* constraints on using an activeX
dll from an ASP script; All variables must be passed ByVal, and you have to
remember that the dll runs with the accessrights of the web-user account.
But apart from that, no great concerns...
> Let's warp the scene a bit. Foo is not a COM DLL, but this time with
> version 2, its just got a bit smarter and dainty with a dazzling
> interface. It is now reborn as an ActiveX Control, and all the people
> at Phil de Lucre make love to celebrate the new avatar.
They shouldn't...
An activeX *Control* opens a whole new can of worms.
>
> When I hit the "Get me the darn rate and make it quick!" button this
> time, what happens? No no! More importantly, I beleive something
> happens even earlier, the moment I type
> http://www.ForexRatesOnYourTips.com/Calculator.asp, right?
Right!
Because now, Mr. Mone Flee have replaced the serverside call:
Dim ObjFoo
Set ObjFoo = Server.CreateObject("Lib.Foo")
with the following:
classid="clsid:28077E35-EE6F-4EFE-B274-7798CDB4CDCD"
id="theFantasticCurrencyConverter">
Which tells your browser to go into the registry to look up the
component known by the name "28077E35-EE6F-4EFE-B274-7798CDB4CDCD",
and start it. Now, all the work are done locally on your computer.
This component must of course be present on your computer, and if not,
will result in one of two things...:
If Mr. Flee have included in his object tag a hint to where the componenet
can be found, a download and installation will occur...
....if not, the expected glorious interface will be replaced with a tiny
little picture of a red "X".
The "can of worms" part, lies in that if you download this component,
you place the life and sanity of your computer in the hands of Mr. Flee.
Because when his component are installed on your PC to do its job, its
given the full run of whatever code can do on a computer.
Dag. -
How to change the java control panel and the default java in windows.
Hi,
Please help on the above problem. I need the answer urgently.
I have two java version 1.4 and 1.5. I first installed the java version 1.4.2_06 and then 1.5.0_19.Now the default java is 1.5.
Now I want to chang the java settings to 1.4 by changing the envioronment variable (classpath,path,java_home)
C:\Program Files\Java\jdk1.5.0_09;C:\j2sdk1.4.2_06
C:\Program Files\Java\jdk1.5.0_09\lib;C:\j2sdk1.4.2_06\bin
C:\Program Files\Java\jdk1.5.0_09\bin;C:\j2sdk1.4.2_06\bin
But after setting these does not solve the problem. The java control panel which appears is the same what was appearing for java 1.5.
I want to see the control panel for 1.4.2_06.
Thanks for your help.
Regards,
Saritasarita2320 wrote:
..Please help on the above problem. I need the answer urgently. ...Is it still urgent?
When I opened your post and saw that line, I immediately moved it to the 'last in line' of a whole bunch of other stuff I did not have time to look at immediately. Now that all that other stuff that did not bore me with someone else's time constraints is out of the way/taken care of, I've returned to your post. -
Release Controled code and the Cloud i.e LR 5.3rc
Lightroom 5.3rc has just been announced. What are the options for user contol over using Release Controled code if you are using a Cloud version of the LR code?
This something it would be nice to know, before making a commetment to use the Cloud.I finally installed Adobe Lightroom CC app successfully, but Photoshop CC did not load due the 'download appears corrupted'. No other help is offered except to try again in a few minutes which I have several times to to no avail. Code U43M1D204 was provided.
Maybe you are looking for
-
Resore SQL server 2008 SP3 database to SQL server 2008 R2 SP1
I have a dump from a SQL server 2008 SP3 server and I'm trying to restore it to SQL server 2008 R2 SP1 server but getting the error: Msg 3241, Level 16, State 0, Line 2 The media family on device 'E:\Work\backup.bak0' is incorrectly formed. SQL Serve
-
Preview & Adobe Clearscan save file problem
Preview appears to have some compatibility issues with Adobe Clearscan OCR'd PDFs. While Preview can view and read the PDF initially and can copy text from the PDF into other applications; if you attempt to save the PDF in Preview (with or without ma
-
Smart builds in Keynote 6.0?
I opened presentations previously built with Keynote 5.3 in Keynote 6.0 to find that all my smart builds have disappeared! The Action "Revolve" where you can have multiple objects revolve has disappeared. I find it odd that Apple is removing feature
-
Maxon Motor Control and NI UMI7774
Hello, I am using maxon motor control PWM servoamplifier ADS 50/10 for my application.I am currently working on a project that requires me to get the precise position (mesure) with an incremental encoder with 2 channels A and B. I am Using NI Motion,
-
Hi this thread i made earlier http://discussions.apple.com/thread.jspa?threadID=1662966&tstart=0 is now archived and i wanted to comment on it so i made this one 2. I think i may have a few years ago added a disk label and put in a dvd to burn it. is