Tree data wanted to display as wizard layout

Scenario: (Reqeust : HIGH)
I am using Tree-Form layout + wizard style(so that data obtained through that Leaf node presents in Wizard style). Regions are creted with 'Separate pages' Property.
What i get is . Tree with proper data displaying at right side. but the data where i have used wizard + separate pages does not come at right side.
WANTED:
I want to have Tree structure on left side. when i click leaf node (Say 1 specific leaf node) i should have wizard to run at right side to add data in DB.
Thanks in Adv.

My recommendation would be to first attend one of the ADF JHeadstart Workshops (5 days), see http://blogs.oracle.com/jheadstart/workshop.
After that, it depends on the type of on-the-job experience you get how fast you become an expert. It helps enormously if you have an expert on-site, even if only for one day a week. Then you have someone to ask for help when you encounter something difficult like this. You could ask your local Oracle Consulting representative if they can help.
You must realize, that to become an expert you don't need to know all chapters of the developer's guides. Some chapters are only for advanced functionality that you typically only lookup when you need it.
It also depends of course on your background. It helps if you are already familiar with 4GL tools like Oracle Forms, and Case tools like Oracle Designer. Of course it also helps if you are familiar with Java, J2EE, XML, Velocity, MVC type frameworks, etc.
So it is hard to say when you will be an expert!
kind regards,
Sandra Muller
JHeadstart Team
Oracle Consulting

Similar Messages

Displaying large product layout on a page?

I want to insert a product on a page but the module defaults to the small layout. Is there a way to display the large layout similarly?
Thanks
Tom

Im including a seperate product onto a page for distirbutors sign up... we are doing it in stages though and the small product layout doesnt look right on the page -
http://www.allnaturalassets.com/sign-up as you can see the bottom where the item is, the small doesnt look good so im wanting to display the large layout for this one product on that page :-) The module doesnt allow it though out of the box :-)
Thanks!
Tom

Historical data in r/3 wants to display in bw

Hi
i have some coundition types which i merge in new coundition types,now i want to generate a report so on the basis of coundition type i can see the cummulated fright rates
can anybody let me know for new coundition type i can do this no problem but what about the coundition types which are old one and mapped to new one how i'm able to get historical master data to be displayed in bw
thanks
rubane

i need to to pull data in bw from r/3 for frieght rates
example for rate is from source to dest(in rows) and on the basis of this we have counditon types(in columns) which we will put in coloums and on the base of those cound type we will get cummulated value of master data rate.
like
source dest rate(based on coundition types)
now in r/3 some coundition type are changed to new ones or we can say merged to new ones, now my question for new one i can pull no problem but what i'll do for the historical master data like coundition type in 2006 are diff and 2007 is diff
but they mapped in each othe
thx
rubane

Data not display in background layout

Hi Expert,
This is regarding screen layout.
FBL3N report.... I have create new layout for report FBL3N. when i run the report in foeground all data display in proper layout.
But when i run this report in Background two fields are not display in layout.
Please suggest me whern i do the changes....
Regards
PK.

I think you should change the forum if you are asking Finance module related qwuestions.

Want to display date as per i given in selection parameter

hi
i want to display posting date which ever i given in selection patameter.
i want to display in output in dd/mm/yyyy format.
now its coming like this <b>IBT2006040120060420.</b>
how can i do it .
thanks in advanced.

Hi,
Just use the WRITE TO option and display the date.
For exmaple:
WRITE s_date-low TO w_date. "This converts the date into the user format
WRITE:/ w_date. "This displays the date in the output
Cheers
VJ

Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

this will not work. Numbers does not provide a timestamp. you can, however, enter the formula "=now()" in any cell, then copy that same cell, then paste (using the command "Edit > Paste Formula Results"
If you need a time stamp often,
make a single cell table with the formula (mentioned earlier).
and copy and paste as needed

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

I have a key figure in my master data table i want to display the key figur

Hi All,
I have a key figure in my master data table i want to display the keyfigure in my report how can i display it can somebody help me in this scenario
Regards
Kiran Kumar

Hi Kiran,
Assume that Material master data table material has price as an attribute. To get this price as key fig in query, get material number in rows and in columns create new formula with replacement path to get material price as key figure.
Note: Without taking material number into rows, we can't get the price into columns.
Hope this helps u..
Cheers......
Sk babu

Prompt i want to display as From Date & To Date - as a lastmodified date

Hi All,
i want to displayed as a from date and to date from the column name as lastmodified date in the prompt. in the prompt i selected the between option it is displayed as a between and not as a from date - to date.
From Date(prompt button as calender)----------To Date
Thanks
Chandra

Hi,
can u pls look into the below link
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12188/T421739T524310.htm

Service order is on product deliver status ,then i want to display product delivery status date and time on result list ?

Hi Team,
service order is on product deliver status ,then i want to display product delivery status date and time on result list ?My requirement is i want to display product delivery status date and time based on delivery status we need to display the date and time .how to do it.? basically i have created the productu delivery status field in search and result through AET.
Now the fields will be available in BTADMINH.
how to set based on status delivery to get the date and time .
Thanks
Kalpana

HI Ajay,
I have added code in BT116h_srvo,attributes - LCSTATUS,method - SET_LCSTATUS.but after change status f8 ..but the value is not filled in result list..so i need to write the logic in EH_ONSAVE or some other..could you please help here..what change i need to do..
IF
<nval> = 'E0004'.
DATA : lv_date TYPE dats.
DATA : lv_time TYPE tims.
lv_date = sy-datum.
lv_time = sy-uzeit.
DATA : lr_parent TYPE REF TO cl_crm_bol_entity,
lr_adminh TYPE REF TO cl_crm_bol_entity,
lr_root TYPE REF TO cl_crm_bol_entity,
lv_process_type TYPE crmt_process_type,
lv_parent_name TYPE crmt_ext_obj_name,
lr_current TYPE REF TO cl_crm_bol_entity.
lr_current ?= current.
lr_parent ?= lr_current->get_parent( ).
CHECK lr_parent IS BOUND.
CALL METHOD lr_parent->get_parent
RECEIVING
rv_result = lr_adminh.
CHECK lr_adminh IS BOUND.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0010'
iv_value = lv_date. "value.
CATCH cx_sy_conversion_error .
ENDTRY.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0011'
iv_value = lv_time.
CATCH cx_sy_conversion_error .
ENDTRY.
ENDIF.
Thanks
kalpana

Want to display data in receipt form in Smartforms

Hi friends,
    I want to display data in receipt form in smartforms....Format is given below:
    Name : [fieldname1]
number : [fieldname2]        country code : [fieldname3]
n so on....It should display 1 record on one page and so on.......how can i go about it....
Regards,
Vijaya

Hi Vijaya,
First, you need to design the lay-out for your pages.
Say for example in your case you take a window XYZ (variable type) to print:-
Name : fieldname1
number : fieldname2 country code : fieldname3
Now you have some amount of data for this detail.
Say you print this data in a table.
After the last node for printing data, insert a command line under the last node (in main area of the table control).
And on the next page use the same MAIN window (or use next page of PAGE1 as PAGE1).
In other way, if you are printing a single record on a page.
Then this can be done by simply taking a loop statement in the main window of the page followed by text-fields (from internal_table into work_area).
Under the loop statement, in these text-fields you can simply print your data (using the work area) :-
Detail 1 : &wa-field_name&
and so on....
After the last detail (node), insert a command line and write 'NEW-PAGE'.
This will break your control on to next page and eventually one records will be printed on a single page.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

I want to display a first word in the data of a column

i want to display the first word
example: Software Engg Ooo
answer should be Software
using simple query no nested queries

10g:
SQL> select regexp_substr('Software Engg Ooo','[^ ]+') from dual;
REGEXP_S
Software

I want to display data from 1st form to 2nd form...

Hi
I'm having 2 Forms.In the 1st form i'm having Master & Detail Blocks.
By clicking button i'm trying to call another form.
In that form i what to see the Master Block Data should be displayed on the form.
So wht is the type of Canvas can i use or is there any other alternative way for this issue.
Try to help me in this
Regards
Siva

Go through this
1 form data display 2 form

Numeric data is not displayed in BI Publisher 11g report

Hi,
I'm using Oracle BI 11g (11.1.1.6.0).
I'm experiencing a serious issue with numeric data in reports created with Publisher.
When I define the query in the data model, numeric data gets declared as "integer" (even if it should be "double"). Anyway, when creating the layout all data is correctly shown.
The issue emerges when I run the report in interactive mode: numeric data is not displayed at all.
If I run it in HTML mode or other, I get proper results.
I tried to explicitly CAST numeric data in the query to number(21, 6) but I get no different result.
Any help or suggestion is warmly welcome.
Thanks,
Cristina

Yes, assuming that you are using the Standalone version, following are some excerpt from user guide.
10g see Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01
Chapter 6 Building a Data Template
Supported Column Types
CLOB (conditionally supported)
The CLOB must contain text or XML. Data cannot be escaped inside the CLOB column.
And for 11g see
Oracle® Fusion Middleware
Data Modeling Guide for Oracle Business Intelligence Publisher
Release 11g (11.1.1)
Part No. E18862-01
Chapter 3 Creating Data Sets
Using Data Stored as a Character Large Object (CLOB) in a Data Model
BI Publisher supports using data stored as a character large object (CLOB) data type in
your data models. This feature enables you to use XML data generated by a separate
process and stored in your database as input to a BI Publisher data model.
Use the Query Builder to retrieve the column in your SQL query, then use the data
model editor to specify how you want the data structured. When the data model is
executed, the data engine can structure the data either as:
• a plain character set within an XML tag name that can be displayed in a report (for
example, an Item Description)
• structured XML
Cheers,
ND

I want to display icons in ALV

Hi friends,
I want to display icon indicators in ALV ???
can anybody tell me ??/
Thanks...

Hi sturdy,
this code will help u...copy paste and run...
*& Report ZFI_TEST                                                    *
REPORT ZFI_ICON_TEST MESSAGE-ID zz .
*& TABLES DECLARATION *
TABLES: vbak.
*& TYPE POOLS DECLARATION *
TYPE-POOLS: slis.
*& INTERNAL TABLE DECLARATION *
DATA: BEGIN OF itab OCCURS 0,
icon TYPE icon-id,                 "itab-icon = '@08@' -> Green ;     '@09@' -> Yellow ;     '@0A@' -> Red
vbeln LIKE vbak-vbeln,
audat LIKE vbak-audat,
vbtyp LIKE vbak-vbtyp,
auart LIKE vbak-auart,
augru LIKE vbak-augru,
netwr LIKE vbak-netwr,
waerk LIKE vbak-waerk,
END OF itab.
*INTERNAL TABLE FOR FIELD CATALOG
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
it_fieldcat TYPE slis_t_fieldcat_alv.
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE,
*INTERNAL TABLE FOR EVENTS
DATA: it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event,
*INTERNAL TABLE FOR SORTING
it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv,
*INTERNAL TABLE FOR LAYOUT
wa_layout TYPE slis_layout_alv.
*& VARIABLE DECLARATION *
DATA : v_repid TYPE sy-repid,
v_pagno(4) TYPE n,
v_date(8) TYPE c.
*& CONSTANTS *
CONSTANTS: c_x TYPE c VALUE 'X'.
*& SELECTION SCREEN *
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_vbtyp FOR vbak-vbtyp DEFAULT 'C'.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) text-003.
PARAMETERS: p_list RADIOBUTTON GROUP rad1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) text-004.
PARAMETERS: p_grid RADIOBUTTON GROUP rad1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN.
PERFORM validate_screen.
*& START OF SELECTION *
START-OF-SELECTION.
CLEAR: itab, itab[].
V_REPID = SY-REPID.
PERFORM get_data.
PERFORM display_data.
*& END OF SELECTION *
END-OF-SELECTION.
*--DO ALV Process
v_repid = sy-repid.
*--Sort the Output Fields
PERFORM sort_fields.
*--Build Field catalog for the Output fields
PERFORM BUILD_FIELDCAT.
*--Set the Layout for ALV
PERFORM set_layout.
*& Form GET_DATA
text
TO GET THE DATA FROM TABLES INTO ITAB
FORM get_data .
SELECT vbeln
audat
vbtyp
auart
augru
netwr
waerk
INTO CORRESPONDING FIELDS OF TABLE itab
FROM vbak
WHERE vbeln IN s_vbeln AND
audat > '04.04.2005'
AND netwr > 0.
LOOP AT itab.
    IF itab-netwr < 10000.
      itab-icon = '@08@'.
    ELSEIF itab-netwr > 10000 AND itab-netwr < 100000.
      itab-icon = '@09@'.
    ELSEIF itab-netwr > 100000.
      itab-icon = '@0A@'.
    ENDIF.
    MODIFY itab INDEX sy-tabix.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form sort_fields
FORM sort_fields .
CLEAR wa_sort.
wa_sort-fieldname = 'VBTYP'.
wa_sort-spos = '1'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
wa_sort-fieldname = 'NETWR'.
wa_sort-spos = '2'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
ENDFORM. " sort_fields
*& Form set_layout
FORM set_layout .
IF p_list = c_x .
    wa_layout-window_titlebar = 'LIST DISPLAY'(016).
    wa_layout-zebra = 'X'.
*-- ALV LIST DISPLAY
    PERFORM list_display TABLES itab.
*-- ALV GRID DISPLAY
ELSEIF p_grid = c_x.
    wa_layout-window_titlebar = 'GRID DISPLAY'(017).
    wa_layout-zebra = 'X'.
    PERFORM grid_display TABLES itab.
ENDIF.
ENDFORM. " set_layout
*& Form list_display
FORM list_display TABLES p_itab .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = v_repid
      is_layout          = wa_layout
      it_fieldcat        = it_fieldcat[]
      it_sort            = it_sort[]
      i_save             = 'U'
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " list_display
*& Form GRID_DISPLAY
FORM grid_display TABLES p_itab .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = v_repid
      is_layout          = wa_layout
      it_fieldcat        = it_fieldcat[]
      it_sort            = it_sort[]
      it_events          = it_event
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form VALIDATE_SCREEN
text
--> p1 text
<-- p2 text
FORM validate_screen .
DATA: lv_vbeln LIKE vbak-vbeln.
IF NOT s_vbeln IS INITIAL.
    SELECT vbeln
    INTO lv_vbeln
    UP TO 1 ROWS
    FROM vbak
    WHERE vbeln IN s_vbeln.
    ENDSELECT.
    IF sy-subrc <> 0.
      MESSAGE e000 WITH 'INVALID SALES DOC'.
    ENDIF.
ENDIF.
ENDFORM. " VALIDATE_SCREEN
*& Form display_data
text
--> p1 text
<-- p2 text
FORM display_data .
DEFINE m_fieldcat.
    add 1 to wa_fieldcat-col_pos.
    wa_fieldcat-fieldname = &1.
    wa_fieldcat-ref_tabname = 'VBAK'.
    wa_fieldcat-do_sum = &2.
    wa_fieldcat-cfieldname = &3.
    append wa_fieldcat to it_fieldcat.
END-OF-DEFINITION.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv.
m_fieldcat 'ICON' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'AUDAT' '' ''.
m_fieldcat 'VBTYP' '' ''.
m_fieldcat 'AUART' '' ''.
m_fieldcat 'AUGRU' '' ''.
m_fieldcat 'NETWR' 'C' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
ENDFORM. " display_data[/code]

Tree data wanted to display as wizard layout

Similar Messages

Maybe you are looking for