TreeView nodes don't display

While working my way through the IDCS3 SDK I'm about to implement a ListBox by using TreeView. I had a working plugin displaying a panel with some static text and two RollOverIcons. Then I compiled wlistboxcomposite from the SDK samples and it worked ok too.
I then moved over all parts relevant for the listbox from the sample, adjusted widget names, boss name classes a.s.o, but I don't get it working. The whole panel is empty (grey background) with a greyed out scrollbar on the right border: the list entries are missing.
I've looked through everything at least twice but don't see the reason for this. RefMeTreeViewAdapter populates the StringList ok and also DoAddItem() works as I can see from a InformationAlert I hacked in for debug reasons. Unfortunately I've no debug build for further investigations.
But maybe someone of you has an idea what can cause this symptom.
Regards,
Juergen

To resolve that issue. Another few hours later I discovered I missed adding LocaleIndex for the NodeWidget resource. After that it works.
> You should never ship a plugin without testing it in the debug build.
Thanks for the link. I somehow doubt Adobe will hand out a debug build to a hobby coder who's still in evaluation phase. But I'll think over it.
Juergen

Similar Messages

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

The text which is in text node is not displaying in output in smartforms

Hi,
In smartforms i created a text node and entered some text like following.
     Target Quantity               60000001     60000002
     Scheduled Quantity               60000003     60000004
     So far delivered Quantity          60000005     60000006
     Last delivered Quantity          60000007     60000008
      Delivery Schedule Details
the text which i entered as above in the text node is not displaying.It is in main area.

Hi
if u are using table or template inside the main window
then just mention the position of the text element
goto text element - output options- output structure tab----give line and column no.
Thanks
krushna

Some graphs don't display in OEM Grid Control 10gR5 (10.2.0.5)

A number of the performance graphs (e.g. Top Activity) don't display i.e. there is nothing but if if you right-click in the empty area you get a small pull down with Print, Settings, About Adobde Flash 10.
This has all happend after upgrading to 10.2.0.5. OMS and client environment is:
Windows 2003 SP2 (32 bit), IE 6 with Flash ActiveX 10, Flash Player 10.
Anyone got any ideas or anyone got it working fine.
Thanks.

Windows Server 2008 OEM 11g Performance graphs do not display.
Click OEM Performance Tab and IE7 information bar displays message:
"Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly."
Workaround: Disable Internet Explorer Enhanced Security Configuration in Windows Server 2008
Unlike with previous versions of Windows Server in which you could disable Internet Explorer Enhanced Security Configuration by removing the component in Add/Remove Programs, Windows Components
the Windows Server 2008 implementation of Internet Explorer Enhanced Security Configuration is configured through Server Manager.
Select the root of the Service Manager navigation pane, and under the Server Summary click Configure IE ESC, which is part of the Security Information section.
A dialog box appears, letting Internet Explorer Enhanced Security Configuration be enabled/disable separately for normal users and administrators.
See YouTube video:
http://www.youtube.com/watch?v=OO3PPN1olHY

How to blink TreeView Nodes based on condition c#

suppose i am populating my tree view with data from database and i want to blink those nodes which has a specific data. now guide me with code how can i efficiently blink multiple tree view nodes based on condition in winform application.

Hi Mou_kolkata,
>> anyone can give me small working code for tree node blinking
Thank Armin for the details about blinking TreeView Nodes.
For a simple demo to blink TreeView nodes, you could refer the link below:
# Treeview control - How to make a node blink?
https://social.msdn.microsoft.com/Forums/en-US/64e7a4d7-3098-4370-990f-390cb3a640a1/treeview-control-how-to-make-a-node-blink
If you have issues when you blink Treeview nodes, please feel free to post a new thread in this forum, then you would get more help.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Events added in iCal don't display in Google Calender

I'm using my google address for iCal as I don't have a MobileMe account.
Events added in Google Calender display in iCal, but events added to this account in iCal don't display in Google Calender. I have tried subscribing to my Google Calender in iCal, but the address isn't recognized by iCal.
I have even tried deleting and re-adding my Google Calender, but still no joy.
Are the calenders I am using in iCal and Google the same calender, or are they actually different calenders with the same username? Someone help me sync the **** calenders!

Hi Ellyenne,
Ellyenne wrote:
It didn't help.
I want my iCal events from my HOME calendar to display in my google calendar.
I DO NOT want to move my iCal events to my google calendar. I have way too many. So, why won't my iCal events show up on my google calendar?? My google events show up on my iCal. It's a SYNC. They should be the same.
I'm sorry my answer to Clint is not what you want.
iCal and Google on their own do not do what you want.
There are/were some third party add-ins that worked in the way you describe that were mainly developed before Google Calendar had CalDAV integration.
Best wishes
John M

Math fonts don't display in mail messages?

For some reason when I receive a mail message with math - fractions, equations, etc. these characters don't display. My husband has an iPhone 4 and this isn't a problem on his phone. I am wondering how I can get these characters to display?
Thanks

Hi markatos
Hi Rick Van Vliet
I have the same problem, and I can also (only) underline text.
Since upgrading to Tiger (10.4.8) from Panther 10.3.9, I have experienced a few daft functional problems, eg the 'Enter' key not working on the calculator (the standard one, not the Dashboard version). This turned out to be a '.plist' problem.
Mail was marking all outgoing mail as 'Junk' ... '.plist' problem again.
But I cannot see how to sort this one ... at the moment I am having to format text on a Stickie then paste it into a Mail message in order to do simple things like bold headings (I don't need any more than this really). So the 'Font' palette is working. Message format is set to 'Rich Text'.
Any ideas anyone?
Help will be appreciated.
Thanks in advance.
Paul

Word docs don't display fonts since upgrade to 10.6.

Word docs don't display fonts since upgrade to 10.6. Got this error message in Console:
6/14/11 9:38:14 AM [0x0-0x11011].com.microsoft.Word[140] Tue Jun 14 09:38:14 Michael-2.local FontCacheTool[144] <Error>: ATSFontGetPostScriptName failed: error -984.

Thanks but I searched and searched there. Nothing listed that addresses this issue. Am I the only person to upgrade to 10.6 and have a problem with seeing type in Word afterwards? Does anyone understand what the error message means?

In Firefox 15.0.1, jpegs don't display in body of email, even in older saved emails that were originally o.k. Photos display fine in Explorer.

jpeg photos sent to me in emails don't display -- just get a torn page type box. Prior emails saved in folders are also affected. If I forward the email to an email account in Explorer they work fine.

Thanks, but I had already tried these Firefox suggestions. I don't think it is a Firefox problem after all, since even when I load my Yahoo email account in Explorer the images don't display. Interestingly enough, when I forward them to my husband's Yahoo account, or my Google account, the jpegs display fine. This appears to be a somewhat new problem, and only in MY Yahoo email account. I have not knowingly made any changes to it in the last few weeks. I've tried to find suggestions in Yahoo's site and in my service provider's site (AT&T). No luck.

My thumbnails don't display

I had to restore my hard disk via Time Machine, and my iPhoto software doesn't work right. When I open it, the thumbnails don't display. If you double-click on a blank tile, the photo shows up. How do I get my thumbnails re-connected. I have already done a permissions fix and re-installed iLife '11.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails. You may need to repeat this three or four times in my experience.
Regards
TD

Previews don't display

Aperture 3.2.2, MacBook Pro, 8 Gb ram. I keep my CR2 (Canon 60D) RAW photos in Aperture on an external usb 2 drive so my wife can view them from her "user" side of our computer. We are both "admin" users. I know the library can't be shared, so I turn Aperture off on my side before she logs into her user side to see the pics, and vice versa. Yesterday I uploaded some pics to Aperture from my user side and they all appeared as expected in the library. All thumbnails, and full size pics show up fine. When I turn Aperture off on my side, and login to my wife's user side to view the pics the thumbnails don't display in the browser. The pictures are represented by empty placeholders. If I double click on an empty (thumbnail) placeholder, the picture opens and can be seen and edited as usual. Upon closing the image, the thumbnails still don't show.
When I upload images from my wife's user side, everything shows up fine on her side, as expected, thumbnails and all. But when I switch to my side, the thumbnails don't display, but double clicking on the empty thumbnail placeholder opens the image for viewing or editing. The problem files are all from a single day/event. Pictures shot on later date, but on the same SD card upload and display correctly on both user's sides.
I have over 5,000 pictures in Aperture, and this is the first time this has happened, all the other pics show up fine as thumbnails on both user's sides.
Any ideas about this?
Peter

>Sorry, but that is plain BS
Let's try to be a bit less flamey, shall we?
>For starters, in order to use the laptop's keyboard, the external monitor has to be way too high, or the laptop/keyboard way too low, since the darned laptop screen gets in the way.
True, but when using an external monitor (in the office) I also have my external keyboard and mouse. The laptop is on the left and behind, sitting on a riser so the bottoms of both screens are at the same level. External display is on the right. Both angled slightly inward towards me. The laptop overhangs the front of the riser (and the external keyboard) so the display is not too far away.
>Secondly, your scheme underscores the futility of using a laptop and takes away any portability advantage you may have had.
I don't see that. The screen IS profiled, just not as well as the external screen. It's plenty adequate for sorting/filtering shoots and preliminary editing, with more serious color correction, output sharpening, et. handled when back at the office.
>Third, you won't be generating much income doing photography or Photoshop work on a lousy laptop screen "in the islands", or at least not for long. You may have earned your vacation, but the laptop sure isn't going to "pay for it". You may permanently lose some clients instead.
I'll have to tell my clients that one. I'm sure they'll find it worth a chuckle. True the last trip was mostly spent coding and working in Flash, and the more critical Photoshop work I did needed a modest tweak once I got back to the good monitor, but it was pretty close and easy to fix. Technically I suppose working on a trip doesn't mean the trip is paying for itself, but rather than bleeding twice (traveling AND not working for a week) I'm only bleeding once. And I happen to enjoy work, so it's not a vacation killer.
> I stand by my fundamental aversion to laptops.
And I by my attraction to them.

Added photos to the video timeline but they don't display.

I have added some photos to the video timeline but they don't display. The end of the last clip is frozen and then the next clip starts once the time for the photo display has elapsed.
A previous photo that I'd inserted in the project previously DOES run correctly. I suspect it may be to do with the fact that I've used cutaways in part of the video. However, where I'm inserting the photos is not in a section where there is an existing cutaway.

It would appear that it's a bug with iMovie. It won't let me add new photos to the duplicated project, but it WILL let me add them to the original project.
After searching the Discussion forums, it would appear that it has affected other users; some have used 'workarounds', but the solution doesn't always work for all. Hope Apple can address it.

Aperture 3: Photos don't display in browser or Viewer

Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

Why some sites don't display pictures on my IPod Touch?

When I surf the web on my IPT(IPod Touch)some sites don't display pictures....Instead there is a kind of blue Lego cube with a question mark on it...
Thanks,
JF

The most common cause is that the site uses Flash. Currently, the Touch doesnt' support Flash. If it's not Flash, it may be some other protocol or app that the Touch doesn't support.

High Resolution Photos Don't Display

Hello,
We have a fully patched Lync 2013 installation with a fully patched Exchange 2013 installation. We've moved all users to the Unified Contact Store, and have had all users upload high-res photos. I can test this via the URL like this:
https://server/ews/Exchange.asmx/s/GetUserPhoto?email=[email protected]&size=HR648x648
I can definitely see high-res photos. Unfortunately, Lync doesn't display them! We get the old, low res AD photos that are horrible. I have read through everything I can find to ensure high-res photos are enabled in Lync, but they just don't display.
Any ideas on how to fix / troubleshoot this?
Thanks!
Nolan

Hi, depends what constitutes everything you could find =)
Can you confirm that the 'DisplayPhoto' attribute of your associated client policy is set to allow ALL photo's, and not just those from AD.
Use the below from Lync Management shell to query the attribute status against your client policies.
Get-CsClientPolicy | Select Identity, DisplayPhoto
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

TreeView nodes don't display

Similar Messages

Maybe you are looking for