Trend Micro OfficeScan 10 - External log server

Hi All,
Has anyone ever configured TrendMicro OfficeScan to send logs to an external log server? i cannot find the settings nor any documentation anywhere!
This topic first appeared in the Spiceworks Community

I posted a while back about choosing a new SAN and I ended up choosing aSataBEASTsince it was anice balance of expandability, simplicity, and price. Well the unit I received was faulty and I can't find another one in my price range so I'm back to square one.Can anyone suggest a storage expansion device? We're a small manufacturing facility so having the latest and greatest isn't a priority, especially when funds are quite limited. To start off I have six256GB Samsung 850 Prosand twelveHitachi Ultrastar 2TB 64MB 7200RPM 3.5" (Enterprise) SATAIII 6.0Gb/s HardDrive. We have aLenovo/EMC iX2-DLwith iSCSI as a stop-gap measure andas much as I like it's simplicity, it's a stop-gap measure at most.I was looking at someNetApp Disk Shelvessince I wanted something simple to deploy (and affordable) but am doubtful of it's features. I was also...

Similar Messages

ISE with Trend Micro OfficeScan supported version

Hi.
My customer have plan to install ISE with Trend Micro OfficeScan 10.5 as NAC solution.
I confirmed below supported AV/AS Products list.
Server side Trend Micro OfficeScan Corporate Edition 10.x is not included.
But Client side Trend Micro OfficeScan Client 10.x is incduled.
What this means?
Trend Micro OfficeScan Client 10.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Client 5.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Client 6.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Client 7.85.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 -
Trend Micro OfficeScan Client 7.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Client 8.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Corporate Edition 5.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Corporate Edition 6.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Trend Micro OfficeScan Corporate Edition 7.x 4.9.0.28 / 3.4.21.1 4.9.0.28 / 3.4.21.1 yes
Cisco Identity Services Engine Supported Windows AV/AS Products Compliance Module Version 3.5.2221.2
http://www.cisco.com/en/US/docs/security/ise/ComplianceModule/win-avas-3_5_2221_2.pdf
Regards,
Miyazaki

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

Trend Micro Officescan crashes MAX Settings

Hello,
we use Trend Micro Officescan on our testmachines. With office scans last update the Measurement and Automation Explorer forgets all alias name of LXI and USB devices, when the computer is rebooted. With import the settings image in MAX everthing runs smoothly again. I know that MAX save its settings in something like a database. Are there any known problems withe MAX database and virus scanners?
Due to company policy I may not configure trend micro ...
Best Regards,
Chris

For the Project Settings, choose Edit>Project Settings, and you can see them all, with the General Tab (most important), Capture (should not affect your Project), Video Rendering (again, should not have much info for you now), and Default Timeline (defines how the Timeline is set up initially, and not of any real use here).
Now, and with the Source Files and Project on your E:\, or your external HDD, how much free-space is on your C:\. That can be very important, especially as with only 2GB RAM, you WILL be using your Windows Page File (Virtual Memory) often, and heavily.
Now, though this is covered in one of the links in the PrE Crashing & Hanging article (Memory & Resources), how is your Page File managed, and is it located on your C:\?
Also, is your Project file (the PREL) located with the Source Files, on either E:\, or your external HDD? I know that you have tried several locations. Also, where are your Scratch Disks (Edit>Preferences) set to? Those can be very large, and if one has them pointed to a nearly full HDD, can crash things.
Last, at least for now, is your F:\ your external HDD? If so, it is formatted FAT-32, and that limits file sizes to ~ 4GB. This ARTICLE will tell you how to Convert a FAT-32 HDD to NTSF.
Good luck,
Hunt

SCCM Endpoint Protection Removal of Trend Micro OfficeScan v10 assistance

Hi,
I just thought i might ask this,
i see that Endpoint Protection has the ability to uninstall "Trend Micro OfficeScan"
We have "Trend Micro OfficeScan 10", we have protected ours with a password,
i would just like to know when i deploy the Endpoint Agent if it still has the ability to uninstall it altough it has a password connected to it
or would i need to manually uninstall it,
On big issue i have is that the password is one of 25 passwords also.
any assistance will do on this.
Kind Regards

It should be able to uninstall TrendMicro. The best thing is to test it against a collection with a few devices. You can control the SCEP installation by creating a custom client setting and deploy that to a test collection - it doesn't have to be a big
bang
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Cisco ACS / Trend Micro Office / Cisco Trust Agent

We currently utilize Cisco ACS Server and Trend Micro OfficeScan and would like to deploy Cisco Trust Agent 2.0 on a few laptops. Has anyone been involved with such a deployment? If so, any suggestions, documentation, suggestions?
Thanks,

CTR uses the admin shares to connect to a windows server.
Depending on how you configured it: It will try a nmap fingerprint scan, use static OS mappings or perform a level 2 scan by using the admin shares.
If you are using it through firewalls, the fingerprinting does not work properly.
You will also notice that since version 2.0.3 there hasn't been any new agents developed for it. Also 2.0.5 started to upgrade all port scans etc whereas before it didn't.
I would look to speaking to your cisco account team about the next version of Cisco IPS instead.

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Dbcon connection from sap db2 to external sql server

Hi ,
I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
"Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'." [dlux.c 445]
M {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
B *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my db is DB2 can we download dbmssslib.so this library and load in kernel file? Is it will work?
Regards,
Rai

Hi Rai,
This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
For more details on configuration and troubleshooting refer to below SCN document
How to access an external Microsoft SQL Server database
Hope this helps.
Regards,
Deepak Kori

File transfer from a FTP server to another External FTP server

Hi,
I have one FTP server , I need to transfer a file from this FTP server to aother external FTP server. Could any one please help me how to write a batch file on FTP server so that my file is transfered to another FTP server by executing the Batch file. I don't want to use SAP server for this.
best regards
bobby

CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203

External DNS server not replicating records to secondary after migration from 2003 to 2012

Hi
I have a query relating to 2012 Server and DNS.
Last week we de-commissioned our primary external DNS server (Windows 2003 Server) and moved the role over to a new Windows 2012 server.
Since this point replication to our secondary server (3rd party hosted) does not seem to occur and our DNS records seem to have expired on the secondary server as we cannot look these up via nslookup.
I cannot see any failures in the event log of the server; I have checked our external firewall logs and nothing is being blocked inbound/ outbound as far as I can see. And the server’s local firewall has been disabled.
The server is a standalone server in a workgroup with a standard filebased primary zone, with no AD integration and recursion disabled.
When I created the zone I copied the .dns file from the old server and selected this in the interface during the creation of the zone on the new server. The new server has the same internal and external IP as the old server and the old server is off-line.
I have also manually increased the serial number of the zone and still no joy.
One thing that I have noticed is when I open the zones properties/Name Servers and click edit on the external nameserver I get the infamous "The server with this IP address is not authoritative for the required zone" error.
Any help Would be appreciated, thanks in advance

Nice to hear that you are close in finding the problem. So in short:
You have enabled Zone transfers in DNS management console for the applicable zone
You have verified that your DNS is listening to the correct interfaces
You have enabled firewall rules to accept TCP and UDP traffic to port 53
You have checked if "BIND secondaries" option is applicable to your case
You have initiated a zone transfer from the secondary server
Lefteris Karafilis
MCSE, MCTS, SEC+
LinkedIn: http://www.linkedin.com/in/lkarafilis
Mail: [email protected]
Blog: http://www.karafilis.net

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Trend Micro Login error on System reports

I'm getting a login failed screeen from Trend Micro when the system report tries to load What password is the system looking for ?
https://services.linksys.com/lela_reporting/lela_reporting.jsp?x=PHg%2BPHU%2BbWlrcm9taWtlQGxpdmUuY29...
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

You go into task then Setup & review computer reports, uncheck and clear out the e-mail address, then hit ok
then you exit network magic and go through and open windows task manager end services on NM services end task on nmctxth
then restart Network Magic and redo the first part I discribed only now enable by clicking on the box and entering an e-mail address
don't forget to confirm by checking your e-mail for the confirmation letter
then in 24hrs it'll be back up.
If that all don't work it's a current server issue and will be resolved by Monday
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

Can you use a self signed certificate on an external Edge Server interface?

Hi,
I have a small lab deployment for evaluation purposes. The Lync FE server works great for internal users. I have now added an Edge server. For the internal interface, I have a self signed certificate from our internal CA. (no problem there) For the external
interface, I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user and installed it for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed
cert is valid (root and intermediate have been checked for validity).
At first, when logging in from the Lync 2013 client on the external users machine, I would get an error from Lync about the cert being untrusted. I have now fixed that error by adding it as trusted. At this point, there are no errors or warnings in the Event
Viewer (in the application or system logs) However, I receive the following error from the Lync client, "Were having trouble connecting to the server... blah, blah".
Here is my question. Does the Microsoft Lync 2013 client and/or the "testconnectivity.microsoft.com" tool specifically prevent or forbid the use of self signed certificates on the external interface of an Edge server? They seem too.
I can tell if the certificate is my problem or something else. Any ideas on how to trouble shoot this?
Thx

Drago,
Thanks for all your help. I got it working.
My problem with the Lync client error, "Were having trouble connecting to the server... blah, blah", was NOT a certificate error. It was a problem with my Lync Server Topology. (My sip default domain needed to match my user login domain.)
Let me update everyone about self-signed certificates:
YES, you can self-sign a certificate on your external edge server. It is a pain, but possible.
I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed cert is valid (root and
intermediate have been checked for validity).
Here are my notes:
Create/enable your own external Certificate Authority (CA) running on a server with internet access.
On the Lync Edge Server, run the "Lync Server 2013 - Development Wizard".
Click "Install or Update Lync Server System". (Lync will automatically determine its deployment state)
You should have already completed: Step1 and Step 2.
Run or Run Again "Step 3: Request, Install or Assign Certificates".
Install the "Edge internal" certificate.
Click "Request" button to run the "Certificate Request" wizard.
You use can "Send the request immediately to an online certificate authority" option to connect to your internal CA, and create the certificate.
Once the certificate has been created, use "Import Certificate" to import it.
Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request...
In the Lync deployment wizard - Certificate Wizard, "Assign the newly imported "edge internal" certificate.
Install the "Edge External" certificate (public Internet).
Click the "Request" button to run the "Certificate Request" wizard.
Press "next"
Select "Prepare the request now, but send it later (offline certificate request).
Supply the "Certificate Request File" name and location. (You will need the file later. It should have the file extension ".req").
Click next on the "Specify Alternate Certificate Template". (which means you are using the default options)
Give it a Friendly Name. Bit Length = 2048. I selected "Mark the certificate's private key as exportable" option.
Fill in the organization info.
Fill in the Geographical Information.
The wizard should automatically fill-in the "Subject name:" and "subject alternative name:' fields.
Select your "Configured SIP domains"
"Configure Additional Subject Alternative Names" if you want. Otherwise, next.
Verify the "certificate Request Summary". Click next.
Run the wizard script to "Complete". The wizard will create a file containing the certificate request with the file extension ".req". (Let's assume the file name is "myCert.req")
Move your myCert.req file to your external CA. Have your CA issue the cert (based on myCert.req) and export the new cert to a file. I save it as a P7B certificate. (Let's call it "ExternalCert.p7b")
In the Lync Deployment wizard - Certificate Wizard, click on "Import Certificate" for ExternalCert.p7b.
Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request... (assign it a friendly name. Let's say "EXTERNAL-EDGE")
For the "External Edge certificate (public Internet), click "Assign".
The "Certificate Assignment" wizard will run.
Click next.
From the list, select your cert "EXTERNAL-EDGE".
Finish the wizard to "complete".
You are finished on the server.
Move the "ExternalCert.p7b" file to the machine running the lync client. Install the cert via the "Certificate Import Wizard".
When installing it to a particular Certificate Store, select the "Place all certificates in the following store" option.
Browse
Select "Trusted Root Certification Authorities"
Finish the wizard.

Cisco ISE and external syslog server

Hi Security Experts,
We are starting with deploying cisco ISE (Identity Services Engine) in our network. We have allocated 250GB space for (Admin+Monitor) ISE node.
I want to know if we can send the logs from monitoring node to external syslog server after a defined time interval.
For example, logs which are more than 10 days old should be sent to external syslog server. So basically our monitoring node will have logs which are at the max 9 days old. Is it possible? Could you point me to some doc which explains configuration of the same?
Thanks,
Kashish

No this isnt possible via syslog. What you are looking for is database purging, so that the monitoring database is purged after a specific time interval. Here is a guide that will help shed some light on this:
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_mnt.html#wp1054328
Tarik Admani
*Please rate helpful posts*

OUTLOOK ISSUE AFTER TREND MICRO

I install trend micro in our exchange 2012 service pack 1. after installation our outlook 2013 on every pc start showing disconnected. owa ecp everything is working fine except outlook. i uninstall trend micro remove every thing related to trend but still
problem is save and also i am receiving error when i or any user start outlook that
outlook is unable to connect to proxy server error code 10 .
please help me in this asap my manager is really upset with me i need best support. we have exchange server 2012 sp 1 and windows 8 .
thanks

Hi
Did you do a restart after uninstalling trend? The AV probably cut all traffic. Did you setup the exclusions on the AV that is required for exchange to work correctly?

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7?

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7? I would like to display a simple web page, and I would like to pass to that web page the answers to all the quiz questions, quiz score, etc. In other words, instead of passing quiz results to a SCORM-compliant LMS like Moodle, I'd like to pass that data to a Drupal Webform using a URL like:
https://www.example.com/my-drupal-webform?param1=value1&param2=value2...&paramn=valuen
Is this possible?
Thanks,
John

You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!

Trend Micro OfficeScan 10 - External log server

Similar Messages

Maybe you are looking for