Trend micro rubotted reports malicious dns query when accessing and reading release note page for 3.6.7 update
Trend Micro RUBotted.exe reports the above. The recommended scan, Trend Micro House Call, completes in 2:40 minutes and does not find a bot on my system. I have done the above action twice, (reading and opening release note fixes) and both times the same identical warnings appeared. My system appears to be clean. However, the RUBotted.exe program is designed to flag bot-like behavior, and I think this finding is correct, and not a false-positive.
This only happens when this page is opened, and I therefore think there is an embedded link that cannot be seen, and is run when this page is opened.
I did update to version 3.6.7, but scanned the system before and after I updated to 3.6.7. Results are identical.
== This happened ==
Just once or twice
== I was looking at the latest fixes for Firefox 3.6.7
Trend Micro has a record of "false positives". Report the problem to them and let them investigate. Please post your results back in this thread for information for other users.
Similar Messages
-
Crystal report 8.5 export to csv and rtf format not working with office 2013
Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
.PDFExportAllPages = True 'ePDFExportAllPages
.PDFFirstPageNumber = ePDFFirstPageNumber
.PDFLastPageNumber = ePDFLastPageNumber
.RTFExportAllPages = True 'eRTFExportAllPages
.RTFFirstPageNumber = eRTFFirstPageNumber
.RTFLastPageNumber = eRTFLastPageNumber
.UseReportDateFormat = eUseReportDateFormat
.UseReportNumberFormat = eUseReportNumberFormat
.UseReportNumberFormat = eUseReportNumberFormat
.XMLAllowMultipleFiles = eXMLAllowMultipleFiles
.XMLFileName = eXMLFileName
Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
MohitHi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?
What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!
Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?
When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
when installing adobe reader on my mac it states that the install is complete, but on same screen its sets thaw an internal server error has occurred and reader will not work
Hi,
I have exactly the same problem on one of my Macs (MBP 15 Mid-2010 / OS X Yosemite): Both reader and Acrobat Pro download without a hitch. Both also install with no problem.
But once you click the program to open, they both return "an internal error occurred".
I tried downloading three separate copies, and still get the same error message when I install and launch. I've also uninstalled the previous installations via CleanMyMac2 to make sure it's no longer in the SSD. Same results.
Am using a new SSD as internal boot drive, with fresh / clean installation of OS X and Apps (previous internal HDD crashed) -- And am seeing errors not only with Acrobat, but also with LR5 which always comes up with a "An error occurred when attempting to change modules" -- inspite or uninstall, download and reinstall. Not sure if it's a registry issue? (Not even sure if that's the case with OS X).
Do I need to reformat the whole SSD? I hope not!
Thanks
Edwin -
When is Apple gonna release a patch for iTunes to sync apps?
I already bought the apps the day it first came out and i can't even sync the january software upgrade to my ipod touch. i'm not about to re-sync my ipod and lose all my music just for 5 little apps. i refuse to do that. i wanna know when apple is gonna release a patch for itunes (7.6.1) so i can sync the upgrade file to my ipod touch without having to lose my music collection?
if the patch doesn't come out by the end of the month, i'm gonna ask for my money back.well, the thing is, some of my mp3's aren't on my computer since i probably deleted them off my hard drive at one point or if i was using another computer to add my music. i have an ipod video that has the same exact collection as my ipod touch, but i like to have my playlists a certain way and i don't want to start organizing it the way i like it again. its such a pain.
i just want apple to at least say something about a patch. they're always quiet about everything, even something as simple as updates. -
MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?
Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com
-
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
When Nokia going to release 7.8 for Lumia 710 ?
When Nokia going to release 7.8 for Lumia 710 ?
Official Windows Phone 7.8 update on Nokia lumia 710
http://www.negablog.com/2013/01/offi...update-on.html -
Edge Transport Server Fails DNS Query When Emailing to one Specific Domain
This issue occurs for the same domain across three different edge transport servers.
All servers are Windows 2008 STD SP2, Exchange 2007 SP1 U9. Emails are delivered using DNS connector from edge. Emails to this one specific domain would sit in the retry queue with DNS query error until NDR was generated. Connectivity Logging generated the following:
2009-09-01T19:52:23.539Z,08CBEDE9198E2DC3,SMTP,subdomain.domain.com,>,DNS server returned ErrorRetry reported by 208.241.124.200
2009-09-01T19:52:23.539Z,08CBEDE9198E2DC3,SMTP,subdomain.domain.com,-,The DNS query for 'DnsConnectorDelivery':'subdomain.domain.com':'cd771f71-77a3-4aca-b002-86f477816910' failed with error: ErrorRetry
I changed the servers DNS settings to different servers with the same response. Validated that manual MX lookups worked, and that I could telnet to any of the three MX records and deliver mail via telnet.
I did a packet capture and received the following:
12 32.280037 172.28.16.55 208.241.124.200 DNS Standard query AAAA SMTPSERVER.subdomain.domain.com
So what is happening is the Edge servers are only performing IP6 lookups, and throughout the log, only for subdomain.domain.com do they NOT perform a regular IP4 A record lookup. I then went about disabling TCP/IP6 as per this article:
http://technet.microsoft.com/en-us/network/cc987595.aspx
this stated to do the following:
Alternately, from the Windows XP or Windows Server 2003 desktop, click Start , point to Programs , point to Accessories , and then click Command Prompt . At the command prompt, type netsh interface ipv6 uninstall .
To remove the IPv6 protocol for Windows XP with no service packs installed, do the following:
Log on to the computer with a user account that has local administrator privileges.
From the Windows XP desktop, click Start , point to Programs , point to Accessories , and then click Command Prompt .
At the command prompt, type ipv6 uninstall .
Unlike Windows XP and Windows Server 2003, IPv6 in Windows Vista and Windows Server 2008 cannot be uninstalled. However, you can disable IPv6 in Windows Vista and Windows Server 2008 by doing one of the following:
In the Network Connections folder, obtain properties on all of your connections and adapters and clear the check box next to the Internet Protocol version 6 (TCP/IPv6) component in the list under This connection uses the following items .
This method disables IPv6 on your LAN interfaces and connections, but does not disable IPv6 on tunnel interfaces or the IPv6 loopback interface.
Add the following registry value (DWORD type) set to 0xFF:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect.
I did the above, and still, the Edge Transport servers would only perform AAAA lookups, and messages would sit in the queue.
As temporary workaround, created new send connector with the three available MX hosts as possible smarthosts for subdomain.domain.com, and this allowed email flow.
I've tried disabling the TCPIP6, and still doesnt work. Any suggestions?Hi Allen and Paul,
we experience problems in receiving mails from senders with this Exchage server problem. When we are aware of the problem, we send them the above mentioned link and ask them to make adjustments. Then afterwards usually mail arrives without any problems.
The problem for us is that it seems as if the problem grows. More and more mail does not arrive on our mailadresses (mine for example is [email protected]) And not all of the senders recieve notifications that mail cannot be delivered. As you can imagine
this situation is unacceptable and damaging our customer relations.
Is there anything WE can do? (apart from sending them the information to make adjustements in their Exchange servers...)
I hope you can help us...
Thanks in advance
Leonard
Hi Leonard,
as stated below we where experiencing the same problem with one of our customers. Seeing that it's a DNS related problem we suggested to the customer to change or add an additional DNS service through i.e. dyndns.com. After adding the current DNS records
to the new DNS service mail started coming in from every customer that had problems.
So for your clients i would suggest a similar solution, it helped over here at least.
Kind regards,
Philipp -
Can I stop a report from Re-executing the query when I go back to that page
I have a report that has a complicated query and looks at a lot of information to display the results. This query then links of to show details of individual items that were displayed in the result. But when I hit the back button on the browser, it executes the query again and it takes a while for the page to load.
Is there any way to stop this and only execute the query when the User pushes a Button on the page else display the previous results.
Thanks
SriramAnother alternative is to make that detail link open in a popup window using
javascript:popupURL(...);This way, the complicated report page is always visible. -
Report from SQL Query -Excel format only show the first page
Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina HanI beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar -
New Mac: Why are CC and Photoshop Elements not working when Lightroom and Reader are fine
Last week I changed computers (swapping an old Mac for a 13-in MacBook Pro Retina running OSX Yosemite 10.10.3. I copied all my data over to the new machine using Migration Assistant.
All programs work fine (including my copy of Lightroom 3 and Reader XI). But my CC and Photoshop Elements 10 do not. I have tried uninstalling both, but whenever I try to reinstall PE10 from its disk or download it just stops almost at the end. I then I get an "initiation failed" message, along with a request to download the now defunct "Support Advisor" app!
I cannot download Adobe Application Manager, or the CC desktop app either - for the former I get an "initiation failed" message, along with the "download Support Advisor" app" message again! For the latter I get a message saying "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." Then I get a message and a link to download Creative Cloud. Then when I've downloaded it and I click on the installer... it runs for a bit and then I get the message again: "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." And I get a prompt and link to download the CC app. Guess what happens next? And so it goes on. And on and on, in a tedious circle.
This is incredibly annoying and frustrating as I have work to do! Anyone have any ideas what's happening?
Cheers
Kdo not use migration to install adobe programs.
you should uninstall and clean whatever you've done, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then dl the cc desktop app to your new computer and use it to install your adobe cc programs, Download Adobe Creative Cloud apps | Free Adobe CC trial
if you have non-subscription adobe programs, use the installation files for them:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
Decimal Point Validation in Oracle Forms 6i
One of my table has a column named interest. Data type of this column is number (4,1) so it can hold 99.9 and 100 both. If user enters 9.99, oracle form accepts the values and rounds it to 10. When scale defined for this data type is 1 so user should
-
My wife has Adobe Premier, and she can put transitions between her PSD stills with no problem. I have Final Cut, and I can't. Is there's a certain file I can use that will be transparency, and be the same quality as Photoshop files/ with layers, and
-
Regarding the Aggregation in Query
hi, Is anybody have idea how I can show only the overall result of the query output in the excel . Is there any way out such that we can publish only the overall result in the portal instead all the contents of the query output of EXcel.
-
Accesing not Oracle DB using ODBC
Hi, I was wondering if this is possible. If yes, can you point where to find instrucctions how to do it. Regards,
-
Any Maya or 3D graphics users with the new MB?
Hello, I'm looking to purchase the new MB and was wondering if anyone has used it for 3D applications like Maya 2008? If so, would the new MB be good enough for modeling & rendering on a daily basis? I know the obvious choice would be to go with MBP