Trend Report and Consolidation Trend Report

Hi HFR Gurus,
I have a requirement to develop Trend Reports. Could you please explain about Trend Reports? How to Develop a Trend report and what are the requirements should meet? What are the columns and rows should consider to develop? What is difference between Trend Report and Consolidation Trend Report?
Thanks
Challenger

This is a common discussin here. Have a read of this: Re: Very Urgent FR Report
But also I would ask the business/client for a template. Each business could have a different understanding of a Trend Report. There are no set rules for having certain dimensions on rows/columns/pages.
Cheers,
Mehmet

Similar Messages

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

Tax Report and Tax Reconcilation Report

Can anyone tell me what is the difference between Tax Report and Tax Reconcilation Report?
What is Tax Reconcilation Report supposed to do?

From the Help Files this is what I have
Tax Report
In this report, you can display documents and manual journal entries that include tax amounts, sorted by tax code.
The tax report includes the following documents:
A/R and A/P invoices and credit memos
Stock transfer documents The stock transfer transactions are displayed only in order to report the transactions in the report due to the fact that the tax percentage is 0.
Manual journal entries
Incoming payments and payments to vendors that are not based on invoices
Incoming payments and payment to vendors that include cash discounts
Tax Reconciliation Report
This report enables you to track the taxes amounts that were posted in sales and purchasing documents and in manual transactions.
The report displays the G/L accounts involved in these transactions and calculates the tax amounts that should have been paid, based on the tax codes defined for each transaction.
The report covers the following transactions:
A/P and A/R invoices
A/P and A/R credit memos
Manual journal entries
A/P and A/R down payment invoices
Incoming and outgoing payments

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

What i sthe diff b/w Interactive Report and ALV Interactive report

Hi All,
I want to know the basic diff b/w Interactive report and ALV interactive report.
Can any one tell me the exact diif.
Thanks in Advance,
Jd

hi jagadish,
both are used for same purpose
interactive report means an output list which displays basic details & allows user to interact, so that a new list is populated based on user-selection. With interactive list, the user can actively control data retrieval and display during the session. a total no of 21 lists including main list are genearetd in interactive lists.
I suggest to use ALV.by using ALV we can display in Grid as well as list format.
Output format will be good . Sorting,Filtering facilities are provided by itself.We can have column headings also. using oops we can also do alv reporting.
if helpful reward some points.
with regards,
suresh babu aluri.

Difference between Interactive report and ALV Interactive report.

What is the difference between Interactive report and ALV Interactive report.
i think there is no much difference the same Interactive report Events and functionality we will implement with ALV.
Experts guide me.

Hi,
ALV interactive report gives many advantages than interactive report like sorting, summing and getting graphics.
An interactive report generally basic list displayed. User double clicks on any valid line or user selects a line and presses as button on the tool bar. Then the corresponding event is triggered
refer
http://www.sapgenie.com/abap/drill_down_reports.htm
You can find a interactive ALV report here
http://www.sap-img.com/abap/an-interactive-alv-report.htm
also refer
Below threads consist of number of interactive ALV codes:
interactive ALV code
ALV-INTERACTIVE.
Interactive ALV
Regards

Run a report and have that report print to several printers - font

Hello,
In 10g, want to use the distribute=yes and destination parameters to run a
report and have that report print to several printers. The destination file is
an XML file that sends the output to printer. The distribution actually works
but the output comes out as a very very small font. Its the correct data but
one would need a magnifying glass to see.
Regards,

Any ideas?
If i print at one printer, the font on the paper(report) good, if i printing at more printers at the same time, the font is really small!!
Tnx,

Scheduling Discoverer Report and distributing Discoverer Report Output

Hi,
We are using discoverer (Along with Oracle HCM R12) and would like the END USER to schedule the reports by themselves.
There is an option to schedule the report, and also an option to share it to chosen users/ responsibilities.
We scheduled one report and also set the sharing option to share with others but it seems the report executes but doesn't get sent out by email to the END USER's email id.
Any ideas / thought on this please?
NB: We are looking to distribute Discoverer Report Output from scheduled Discoverer reports...not looking to share the report with other users/ responsibilities.

Hi,
My bad, Sorry as I was speaking on EBS terms.
Anyways, please see if the following thread helps you:
https://forums.oracle.com/message/4485585#4485585
https://forums.oracle.com/message/2777847#2777847
Also see the forum search:
Forum Search: Share report
Thanks &
Best Regards

Inconsistency in upper level report and drill down report

I have to reports:
1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

Usage Report and Audit Log report showing different totals

I am trying to understand the differences displayed in two similar reports. The first report is an 'Audit Log' Report and it is displaying the number of Resource Account creations over a time period. The second report is a Usage Report using the exact same criteria (objectType = Resource Account and Action = Create). The totals I get back are VASTLY different. Can anyone explain? Is this a known bug?

Hi,
In any report we don't show the storage policies information. In Cost report if the storage policies have different rate factors then we will show the split for the storage information. But in usage report , rate factors will not be applicable as we don''t show the cost details. Hope this clarifies your question. Please let us know if you need more information.
Thanks,
Lakshmi

Data mismatch with ECC FBL5N report and debtor ageing report(BI side)

Hi,
I am facing a data mismatch problem with FBl5N(t-code for customer line item report) report in ECC side and Debtor ageing report in BI side.
The problem is
1) there are mismatch of data with some customer amounts in both ECC and Bi side.
2) and also there are customer Nos with amounts in BI Debtor ageing report which are not there in the ECC FBL5N(t-code for customer line item report)
for the second problem, I checked in the Tables BSID,BSAD in ECC side ,there also these customer Nos are not available.
One more strange thing is that with the same selectionin report on both ECC and BI reports the data mismatch and The extra customers in Bi reports are changing everyday, i.e. we are getting new set of data mismatch and extra customers Nos in BI Side.
If anyone have worked on this type of issue.....kindly help...
Thanks in advance

Hi,
on the one hand it may be delta mechanism of FI_*_4 extractors with the timestamps issue, that your comparision between BI and ECC is at no time up to date.
FI Extraction
on the other hand, it may be the delta problem between data targets in your BI-System, in case you load the FI-Data from a DSO to a cube and make a report on the cube. I have this problem at the moment and will watch this thread for more suggestions.

Re: Tax Report and P&L Report's Sales total not matching

Hi,
My Total Sales Input in the tax report and my total sales in the P&L for a period doesnt match. I persume they both should match as all Tax inputs are sales. I have checked for manual journals into sales account but there are no manual journals.
Any suggestions as to where the differnaces could be located.
Regards

HI,
No I have not made any queries, but using the standard SAP tax report which is under Fianancial Reports - Accounting - Tax - Tax Report. Selected posting date as the date range for the period and Transaction types and selected all transaction types from the listing.
Regards

Running report and get the report result with coding

Hi all,
In our R/3 system, there is a custom sales report.
My question is: is there possibility to get data by running this report and grab it the result with code and store it in internal table?
Sorry if my question too basic because I am not abaper
I am just wondering to find new solution for my project.
Regards,
Steph

My requirement is: I want to get the result from this report
(rather than try to get the data from SAP original table, because this report is very complicated with a lot of selection data) and use it this result into my new program.
The mechanism that I want is pull the result from the current report, not to add some code in current report to push into new program, to avoid changed the report.
Btw, the output of this report not only the excel file, we can also run this report on foreground mode and see the result.
The report is not ALV report.
Regards,
Steph

SolMon 3.2, Difference between SolMon report and Service .sap report?

Hi Guys,
last week i found one strange thing, there are differences between the reports of our local SoMon server report and report from service.sap (service message).
why there will be difference like this, Please help me in this regards.
Regards
Srini

Software Components for SAP Solution Manager 4.0 as of April 2007.
SAP_BASIS 700           Basis Component
SAP_ABA       700           Cross-Application Component
PI_BASIS 2005_1_700     PI_BASIS 2005_1_700
ST-PI     2005_1_700     SAP Solution Tools Plug-In
SAP_BW    700           SAP NetWeaver BI 7.0
SAP_AP    700             SAP Application Platform
BBPCRM    500           BBPCRM
CPRXRPM   400           SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST        400           SAP Solution Manager Tool
ST-A/PI       01I_CRM500    Application Servicetools for CRM 500
ST-ICO       150_700       SAP Solution Manager Implementation Content
ST-SER    700_2006_2    SAP Solution Manager Service Tools
ST (Solution Manager Infrastructure, tx solution_manager, SOLAR01)
ST-A/PI (Download modules to get data for service sessions, monitoring)
ST-ICO (Implementation Content - Business Process Repository)
ST-SER (Service Sessions as EarlyWatch Alert, SAP GoingLive Check, Setup System Monitoring, Central System Administration, Setup Business Process Monitoring, Service Level Reporting, ....)
See also SAP Notes:
- 707705 (www.service.sap.com/sap/support/notes/706705) for an explanation on Components for Messages (with lots of key words).
- 394616 (www.service.sap.com/sap/support/notes/394616) Release strategy for SAP Solution Manager
Best regards
Ruediger

Trend Report and Consolidation Trend Report

Similar Messages

Maybe you are looking for