Treo 680 and Media Player v. 11incompatible

I have a Treo 680, purchased in Dec 2006 and my PC runs Windows XP. I have Windows Media version 11.
I followed the instructions to rip music from my PC to my Treo but when I get to the point where it says to select my device, it's not listed. Then my Treo said it wasn't compatible with version 11 so I tried to download version 10 and my PC said it was't cpmpatible with that version.
I just now updated pocket tunes but that doesn't seem to have helped.
What do I do now?
Post relates to: Treo 680 (Unlocked GSM)

I recently purchased a Palm Centro. I wanted to download music from my pc onto my device so I followed the instructions regarding ptunes and windows media player. I synched a bunch of songs. My device ran out of memory according to windows media player but some songs did transfer. I disconnected my Palm and went to Pockettunes and No Songs were there! I tried to synch just one song but it said I had no room. Where are the songs?
Thank you. Sharon
Post relates to: Treo 680 (Unlocked GSM)

Similar Messages

Static ip option in wifi and media player in notif...

compare to other mobile os this two feature is need in windows phone ...microsoft should add static ip configuration and media player in the notification bar. so that user can easily chage and access he songs.
if DHCP is not enable we can't access the wifi in windows phone so need to enable static ip configuration in windows phone...

Your are not alone with that feature requirement. Please, continue there …
dhanapal wrote:
media player in the notification bar. so that user can easily chage and access he songs.
Because that is a feature request, there you go …

N95, Vista drivers and media player mode

HI, Sorry to double post but I'm new to this forum and not sure where this should go. I got a new N95, I installed the older version of PC suite that came on the disc with the phone. I then updated to the latest version. .83 . It works fine with PC suite I can sync things transfer files etc, however I cant use it in data transfer or media player mode (it keeps searching for drivers it cant find). These are the only modes I am interested in. This is on a fairly new laptop with Vista ultimate installed. However I tried it on another computer in my house with Vista Home Premium installed, however this time I didn't install any extra software and it detected the phone in both data transfer and media player mode without any problems.
So I'm guessing that it installed something to mess it up when I installed the original version of PC Suite. PC Suite cleaner says it isn't vista compatible but I ran it in XP compatibility mode and it appeared to do something, but I have un-installed all versions of PC Suite and it still has the same problem, I cant use system restore as it kept setting restore points whenever it installed a part of PC suite and I ran out of system restore points. So please tell me how can I get it back to normal. It looks like I'm not the only one here with a similar problem, someone must know something, Id be really grateful for any suggestions.
Thanks in advance.

09-Apr-200703:09 AM
azmi wrote:
yes, I do have same problem but I'm using N80 and winxp home, media player version 11, can anyone help us thankx
I can help I think. I just spent all afternoon yesterday with this problem and my conclusion is that in spite of what Nokia says somewhere in the installation documentation about the Media Player driver for WMP 10 working with WMP 10 "or above", it does not work with WMP 11, and if you want this functionality you will have to roll back to WMP 10 from WMP 11.
I think this may not be an option for Vista users, but for WinXP SP2 and an N80ie such as I have, here is what happened to me.
I had WMP 11 and I downloaded the driver for WMP 10 from here.
http://europe.nokia.com/A4237039
I then connected the N80ie to the PC using the C series cable that came with the phone, and when the Found New Hardware Wizard started I browsed to the location of the driver file and it announced that it had installed it, and I had to reboot. Whenever I would reboot, or even without rebooting, the Found New Hardware Wizard kept opening again, and again, and again and would seemingly have never stopped opening.
Now in retrospect I see that I wasn't installing it according to the directions, which say to right click on the WMP 10 driver file and choose "Install", but I don't think that would work any better if I had.
In the end, I rolled back to the Version of WMP that was on the machine when I installed WinXP (which was WMP 9) and then upgraded it to WMP 10.
Then following the directions for installation this time, I right clicked on the WMP 10 driver file, installed it, and it works fine.
If you open WMP 10 and choose Sync, and if the N80ie is connected via cable and Media Player mode, you will be able to choose it at the top of the right hand pane of the Sync display in WMP 10 and see the files on yor N80 plus (if the directions are correct and I understand them correctly... I haven't tried it) copy files in one direction from WMP 10 to your N80.
One thing I did differently than the rollback instructions call for... if you check here:
http://www.microsoft.com/windows/windowsmedia/player/11/readme.aspx
Step 15 under "Rolling back to a previous version of the Player" says "Click Microsoft User-Mode Driver Framework Feature Pack 1.0.0" and then click "Remove".
I found that I had "Microsoft User-Mode Driver Framework Feature Pack 1.5" installed instead of 1.0.0 and when I clicked "Remove" I got dialog box that said if I removed it a whole list of programs might not work anymore, including but not only Nokia PC Suite, and Nokia Software Updater. So I elected NOT to remove "Microsoft User-Mode Driver Framework Feature Pack 1.5", and everything seems to work OK in spite of my not doing that.
Hope this helps.
I think that Nokia needs to come out with an updated driver for WMP 11 or Vista users are out of luck if they can't roll back to WMP 10, and us XP users will have to stay on WMP 10 until that happens if we want this feature to work on our N80's.
Best Regards,
Dave

HELP Audio problem when setting windows volume at max and media player at max

im using msi eclipse x58
whenever i set my windows volume at max and media player at max also, after few seconds it suddenly not hearing audio but my media player is still playing
on other applications like skype wenever i set windows volume at max and after few seconds of voice chat with my friend the error says audio device disconnected.
On game applications while playing game same thing happens audio is gone
it is really stressful can someone pls help me out thanks

Quote from: NovJoe on 17-February-10, 17:01:40
Please list out your full system specs and PSU specs amps for verification first.
My Power Supply is Cooler Master Real Power 550W
i7 core 920
Nvidia GTS 250
hard drive
320gb
640gb
2x 2gb 1333 ddr3 ram

How can i trasfer mp3 files from compuer (widows xp service pack 2 ) to my palm treo 680 and how can i set that mp3 songs as a ringtones for my palm treo 680?

i just syncronize my palm 680 with my computer.now i want to tranfer mp3 files to my palm mobile without using sd card or windows media player.i treid to use windows media player 9 for tranfering files but it didn't show anything to me .what can i do right now?please help me out.
thanks
nazia
Post relates to: Palm TX

Connect your device via usb cable to your computer do not hot sync. Start Ptunes and wait until they connect. You will get a list of things you can do on your computer. It self explanatory from there. You must sync the 2 devices in WMP or what ever player you have on your computer.
As for the ringtones there are several thread explaning what you want to do try this one around page 13,14 or 15 it will explain how to do it without an sd card. http://forums.palm.com/palm/board/message?board.id=video_and_photo&thread.id=4395
Ps the thread is says its about Centros but it will work the same on your 680
Message Edited by rsbas on 09-08-2009 05:44 PM
Message Edited by rsbas on 09-08-2009 05:45 PM

Internet, and video or audio and media player--HELP

Ok...maybe its me but I had a powerbook before this and now I have the Macbook Pro. I'm trying to go to like MSNBC news and play video or audio content that needs either media player or something else. I went to microsoft.com to download media player for MAC OSX and it downloaded a file with an extension of *.sitx and when I clicked on it, my macbook didn't know what to do. Just to clarify--I still have a Mac right so I can't download media player for windows based computer??? anyone have suggestions on what to do?

The suffix means it's a Stuffit file (Stuffit is file compression). Stuffit Expander is a free application that can unstuff it. You can get it here: http://www.stuffit.com/mac/expander/index.html
I did what you did and found that the MSNBC video player did not consistently recognize that I was meeting all the requirements. I was using Firefox at the time and continued to get the dialog about download this and that. I switched to Safari, got that dialog once, but then it started working. I haven't tried it again in Firefox. Note that the player says it is Beta software.
Mac Book Pro 2.0 Mac OS X (10.4.7)

Transport Monitor problem concerning Treo 680 and MacBook

When uninstalling Palm software from a MacBook, some people have found it impossible to reinstall Palm software successfully again. They also have a problem synching and a message that flashes up about a "Transport Monitor." May I ask someone who has successfully resolved this problem to post detailed instructions before I am forced to check myself into a psychiatric ward? Thank you.
james_palm680
Post relates to: Treo 680 (Unlocked GSM)

Hello James.
Check out the accepted solution on this page. I have had some success with those directions. If that doesn't work, you may want to see if the Bluetooth modem option is enabled as described in this post.
Hope one or both of those two links work for you.
Alan G

Zen micro and media player

only just got my zen micro and i am having big problems sync from media player it keeps coming up with unknown error. has anybody else had this problem and is there a way to fix it's

dave_sg,
In addition, you could also update this patch from microsoft for your Windows Media Player 0 to enhance better DRM support.
Jason

Itunes sound and Media player sound

Perhaps this topic has been posted dozens of times but still I got a question.
I believe that media player has a very neat and nice sound while iTunes are more loud and not so deep. even if I make equilizer default. So the question.
Is it possible to male itunes sound to be so nice as Media Player?

I am not sure if there is an answer to your problem, but in the past I felt that both WMP and RealPlayer had slightly better sound than iTunes.
I did find that updating my audio drivers noticably improved the iTunes sound, so that is all I can suggest.

BlackBerry file browser and media player

I hope this is the right place to bring these suggestions up:
I miss having the ability to stream via the default media player. Is there any way of adding that in an update?
Also, and on a similar note, would it be possible to add FTP abilities to the OS10 file manager - thus allowing access to Google Drive, etc. I know there are third party apps out there that can do this but the BlackBerry app does everything I need it to do minus accessing files on my Drive. It seems that in the days of cloud storage, it would have already been a feature.
Thank you.

It should, unless you've got event sounds turned off. (just try leaving them turned on while connected to external speakers with the volume way up and have a call or notification come in; shocking!)
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube

Separate Palm desktop installs for Palm M505 and its apps and Palm Treo 680 and its apps on same Windows XP computer?

Hello:
I'm trying to do a workaround. I've got a Palm M505 that has a terrific keyboard that hooks up to it. This lets me write documents in a very portable way. The Treo 680 never had the equivalent, really full-sized external keyboard made compatible with it. So, I want to create documents on the M505 but otherwise mostly use the Treo 680.
Here's the rub. When I tried to sync both devices to my Palm Desktop version 4.1.2 for Windows XP, it didn't work. Hotsync tries to synchronize apps that won't work on the M505. Also, the versions of Documents to Go are very different (5.x versus 8.x).
I would love to have a separate Palm Desktop installation for each device, so I can have a nice desktop environment for each by launching them separately. But, the Palm Desktop installation "wizard" shuts down and won't give me the opportunity to do a separate Desktop install.
Any ideas other than buying an ultra-small laptop and dropping this kludgy scheme? For instance, if I were to copy the installed files from one directory to another, would this work, or would it not be set up in the Registry?
Thanks!
Post relates to: Treo 680 (Cingular)
This question was solved.
View Solution.

Okay. Stubbornness pays off! I was able to beam documents between my Palm M505 and Treo 680, avoiding the need for complicated syncing of both Palms to my laptop machine. I was also able to beam documents from both Palms to my Dell Inspiron M300 laptop, running Windows XP Pro.
When beaming between Palm devices, the results were better. In the M505, Documents to Go version 5.004 doesn't translate documents into Microsoft Word format but into something it calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word to Go format and save in native Microsoft Word for Windows format.
However, even when beaming a Word to Go (old format) document directly onto the Desktop of my Windows XP machine, it gave me a document I could open, with the text I'd input following a bunch of characters Word obviously didn't understand. If I add the file from my desktop to the newer Documents to Go version on my laptop, I expect it will translate it into a Word file when it syncs to the Treo but haven't tested that. In either case, beaming between Palm devices is the easiest solution and completely solves the problem.
For any readers who are interested, the reason I've so stubbornly tried to solve this problem is that I'm a fast touch typist. My old Palm M505 plugs directly into a wonderful, old Palm Portable Keyboard that is full-sized. Because it's a hard-wired connection, I can type fast. That old keyboard compresses into the same folded footprint as some new foldover external keyboards. It does this even though much bigger by folding in an accordian-like fashion, with four flat surfaces folder together. That keyboard design now exists in some of the keyboards sold by IGo corporation (their old name for it was Sierra Stowaway Bluetooth Keyboard). But, they were unable to figure out how to handshake their Bluetooth with the odd Bluetooth configuation in the Treo 680. Why Palm made the Bluetooth library different in the Treo 680 from other Treos is a mystery to me, but enough of this tangent. Some interested in this workaround may be curious for similar reasons.
Post relates to: Treo 680 (Cingular)

N95 firmware v12 and media player problem

Hi,
In firmware version 10, when I want to go in Media Player, I pressed and holded shortcut key for once then gone in Media Player. But now, In firmware version 12, for going in to Media Player, Sometimes I should press and hold shortcut key for ONCE and sometimes for TWOICE !!!
Why ???Message Edited by zoologist1 on 12-Aug-200707:42 PM

This is a known issue which should be resolved in the next release of the N95 firmware.
Regards,
Edward

Sir, I am not able to get the full screen video while streaming using windows media player plugin in firefox. Double click and right click are also useless as they dont respond. I am using firefox 6.0.2 and media player plugin 3.0.2.629. Please help me

I have add-block+ extension also. I dont know it has any problem with streaming by media player.

I have add-block+ extension also. I dont know it has any problem with streaming by media player.

Airfoil and media Player

Since Airfoil only works with Realone Player is there any software
out there that works like Airfoil only with Media Player.
I ask because there is some radio programing that I would like to send to remote speakers but said programming only works with media Player. I want to do this real time so hijacking to itunes is not an option.
Thanks for any info,
Doug

Airfoil is the ONLY application available that can stream sounds to an Airport Express, aside from iTunes itself. If Airfoil cannot do the job, nothing else is available that can.

Zen Micro w/ firmware 1.x and Media Player 10. Get sync

Hi?I've discovered what was my PC USB 2.0 problems!!! The voltage on mother boart too high! (2.72 instead of the lowest 2.6)!!! That caused USB 2.0 bridge don't working
!!! Anyway. Started with the ZM right connected to the front USB 2.0 port I've started MP 0 to fix my playlists and the import them on Creative Media Source to be then sync'ed with MP3 player. Surprise!!! Just clicking on Sincronize on MP 0 I got the Zen there!!! With its playlists and ready to be syn'ed with MP... So...all that stuffs about firmware, patches....

belay that and sorry for posting this without thoroughly searching through the forum ...
From a post on nomadness.net:
All,
.0.02 is the PDE firmware that enables the 4hr. standby timer. There will be an MTP version that does this also, however the PDE firmware was ready first so we released it ASAP.
Jeremy
Forum Moderator
Creative Labs
Still get REAL nervous upgrading firmware that has no way of going back.

Treo 680 and Media Player v. 11incompatible

Similar Messages

Maybe you are looking for