Treo 700 wx battery

My Treo 700 wx  will show a low battery warning & shut down, at various states of charge, even when charging. If I  unplug it, then remove the battery for a few seconds, then replace the battery, it will show full, half, or whatever charge it should be at. I have cleaned the battery & charger contacts,  & tried both 12v & AC chargers with similar results.
Should I buy a new battery, reprogram, or is the Treo toasted?
Post relates to: Treo 700wx (Verizon)

Hello Paul and welcome to the Palm forums.
The Treo 700wx has been out for a few years now, and if you are still using the original battery 18+ months after getting the Treo, it probably is time to get a new battery.  You can get them at TreoCentral.com for about $25 for the stock battery, or $42 for an extended life battery.  The Treo 700wx uses the same battery as the Treo 700w, 700p, and the Treo 650.
Alan G

Similar Messages

  • Treo 700 Frozen

    My Treo 700 (700 P, I think) is frozen. I can’t do a soft or a hard reset and I can’t turn the power off. Calls to the phone do not ring and go into phone mail. The screen displays 8 solid rectangles, 4 rows by 2 columns. The colors of the rectangles are as follows:
    Row   Column     color
      1           1            red
      1           2            white
      2           1            green
      2           2            red
      3           1            blue
      3           2            green
      4           1            white
      4           2            blue
    I removed the battery and the screen goes dark. Reinserting the battery causes the screen to flash for a fraction of a second and the rectangles reappear. I haven’t installed any new software or ringtones in more than 6 months. Since I can’t turn it off, I’m waiting for the battery to completely drain, but I expect when I plug it in to recharge the rectangles will reappear.
     Is it time for the trash can????   
    Post relates to: Treo 700p (Verizon)
    Post relates to: Treo 700p (Verizon)

    Hello Paul and welcome to the Palm forums.
    The Treo 700wx has been out for a few years now, and if you are still using the original battery 18+ months after getting the Treo, it probably is time to get a new battery.  You can get them at TreoCentral.com for about $25 for the stock battery, or $42 for an extended life battery.  The Treo 700wx uses the same battery as the Treo 700w, 700p, and the Treo 650.
    Alan G

  • Treo 700 / mercedes benz

    please advise-I have a treo 700 and a new benz-my salesman said they were compatible-the treo worked for about 2 weeks and like a rejected heart - it died.
    I went to the MB service team and was told that only the Palm Centro was compatible.
    I like the treo 700 with all it faults - any suggestions -
    would the treo be able to transfer all my info if I switch to heaven forbid a blackberry which is compatible.
    thanks in advance
    Post relates to: Palm Pilot

    Try a 10 second soft reset by taking out the battery for at least 10 seconds. This allows the device to power off completely, like a shutdown on a PC.
    Try to pair up again and see if it will work.
    You can transfer the data from the 700 to the Blackberry by sync'ing to Outlook.
    Post relates to: Palm i705

  • ICal and Treo 700 sync?  Is it possible?

    I really could use some help hear so someone please step up. I have a new Macbook Pro (which I'm confused sometimes on its ability to run windows type programs or what not...but thats a different story). The treo 700 is not a Palm product per say but is made by palm. It basically has the windows operating system. Can I use this and sync ok with ical? Has anybody else done it? Please help.

    As indicated above, Mark/Space is developing a version of the Missing Sync for Windows Mobile which will support Windows Mobile 5 devices like the Treo 700w. I have tremendous faith in the engineering team at Mark/Space, but not much in the WM5 platform itself, no matter which device it is installed on.
    They are offering an early alpha release of the Windows Mobile 5 compatible package, currently at release 2.5a10. There are a couple of caveats: as early release software, it's clearly only for the adventurous, and you must purchase or already own a license for the current release version which does not support Windows Mobile 5 devices. The good news: you get to have some input into the design and testing process, you get to place your data at reasonably serious risk, and you get a FREE copy of the release package when it eventually ships.
    As a committed Palm OS user and equally committed anti-Microsoft zealot, I'm not likely to take the plunge, but I'm pretty sure that I would sign on just for the adventure if it weren't for those factors. It is possible to meticulously protect both you Mac OS and Palm OS data from disaster, and if you're willing to take some risk, you might find the experience rewarding.

  • Outlook and Treo 700 wx are missing most, but not all, of my calendar entries

    I am running Windows XP and Outlook 2003 (SP3).  I have a Treo 700 wx with service from Verizon.  I normally sync via USB using ActiveSync.  A few days ago I noticed that most, but not all of my calendar entries were missing.  I am missing 99% of my future appointments, which of course is my big concern.  I am not missing too many historical appointments (at least starting 1 month ago).   I have synced the same way for years without a problem.  I did try to set up Wireless Sync via Verison about a week ago.  I called Verizon support to see if I somehow screwed up my calendar in the process of trying to set up Wireless Sync, and they said I never succeeded in setting it up (which I suspected), so they don't think that was the problem.  Do you have any idea what I could have done wrong and how I get my future appointments back?
    Post relates to: Treo 700wx (Verizon)

    I am running Windows XP and Outlook 2003 (SP3).  I have a Treo 700 wx with service from Verizon.  I normally sync via USB using ActiveSync.  A few days ago I noticed that most, but not all of my calendar entries were missing.  I am missing 99% of my future appointments, which of course is my big concern.  I am not missing too many historical appointments (at least starting 1 month ago).   I have synced the same way for years without a problem.  I did try to set up Wireless Sync via Verison about a week ago.  I called Verizon support to see if I somehow screwed up my calendar in the process of trying to set up Wireless Sync, and they said I never succeeded in setting it up (which I suspected), so they don't think that was the problem.  Do you have any idea what I could have done wrong and how I get my future appointments back?
    Post relates to: Treo 700wx (Verizon)

  • Flash player for Palm Treo 700 w 1.1 verizon Emulator

    Which Flash player is used for Palm Treo 700 w 1.1 verizon
    Emulator, running in windows Mobile 5.0?

    Hi,
    Try using the FlashLite 2.1 for Windows Mobile 5.0
    Regards,
    Vijayan.
    "MSSenthil" <[email protected]> wrote in
    message
    news:ei9oee$qt5$[email protected]..
    > Which Flash player is used for Palm Treo 700 w 1.1
    verizon Emulator,
    > running in windows Mobile 5.0?

  • Contact list download from a Treo 700

    can the contact list from the treo 700 be downloaded directly to the iphone??

    Absolutely not.
    You must synchronize your Treo contact records using a product like iSync—or, transfer your Treo contact records into the Address Book as vCards—then synchronize the iPhone using iTunes via USB to transfer them from the Address Book to the iPhone.

  • TREO 700 NOT BEING ABLE TO SYNC ... EVEN WITH MISSING SYNC

    Nothing. It does nothing. I press the former "hot sync" button and it plays a funny sound. Then, nothing. There is no reacting, nothing seem to happens.
    Help please!

    Hi Tif
    Something here help?
    http://www.treomobile.com/news/software/treo-700-mac-support-2005102721/
    Now, admittedly, this is dated 2005 & things may have changed since then.
    Seems to have a link to PocketMac & something called Mark/Space.
    Steve

  • How can I recalibrate or reconfigure my Treo Pro's battery meter ?

    Hello ! I've got a problem with my Treo Pro and I'd like to get more information about the solution.
    I've bought a new extended battery (2400mAh). It works very well, but my phone's battery meter doesn't give me correct datas about charging level of the extended battery. I've heard about the same problem on other forums from other people who use extended batteries. Independent on the manufacturers, they have the same problem with their Treo Pros. Please, help me. We have to use extended batteries, because the Palm's original battery (I think it is a 1500mAh) isn't fit to anything (my 1 month old phone works with its original new battery for a 3 days). My phone works very well with the extended battery for about 6 days. During this period in the first 3 days the battery meter runs from 100% to 0%, remain on 0% in the next 3-4 days until it depleptes and it annoy me with its messages (please charge the battery avoid losing datas and so on).
    So I'm searching for any registry hack, recalibrate phisical methods, idea or any other way to reconfigure the battery bar. Please, help me or give me more information about the developer's e-mail or developer's forum.I'd like to solve this problem.
    Thank you for your help.
    Post relates to: Treo Pro T850U (Unlocked)

    iOS: Using FaceTime

  • Treo 700w - 0% battery, restarts, won't recharge - turns off

    I'm having just about the exact same problem as this poster http://forums.palm.com/palm/board/message?board.id=hardware&thread.id=41303
    When I plug the phone into the charger, it will go to the menu screen and count down 30 seconds before turning off. 
    I've tried 2 diffferent chargers, 2 different battery packs and none have worked.  
    When the phone is on for the 30 seconds, it says it's charing in the upper right corner, and gives the lighting bolt sign to symbolize that it is charging, but the light on the outside of the treo does not light up and it doesn't hold onto any charge.
    Thanks for any advice.
    Post relates to: Treo 700w (Verizon)

    Hard reset device, if the problem continues then it will need to be repaired or replaced. 
    Post relates to: None

  • MSI GX 700 CMOS BATTERY

    Hi
    I need to remove the battery from the MSI GX 700, because the laptop doesn't boot up at all. I have checked various videos and even a japanese manual for the laptop, but to no avail. Can someone please advise me how to remove the battery?
    thanks.

    Quote from: senzer on 08-April-11, 23:37:58
    Ok a friends laptop has died while watching YT of all things. BSOD then it won't boot or POST. The only option I think it is would be the cmos, least thats what google is telling me. My friend has opened the laptop, but is unable to find the cmos battery. I can attach a blurry picture of the board, if that helps?
    then probably the battery is located at other side of the mainboard, not accessible.
    however:
    Quote
    Ok a friends laptop has died while watching YT of all things. BSOD then it won't boot or POST.
    this will not help... there is some kind of hardware malfunction

  • Nokia 700 massive battery drain after fp1

    Why nokia? I mean why? With gps or not the battery drain is huge if i play 2 hours of asphalt every day i cannot reach the night! Apart of that, better than any android, smooth experience nice new features ! but battery

    Has the battery life diminished that much?
    I find that even pre-FP1 Symbian's battery life is poor. The 1080mAh batter is cripplingly small. They had to do that to conserve space. I would recommend that you remove widgets such as "Social" and "Twitter/Facebook" that CONSTANTLY check for updates, and set your email retrieve rate to once an hour. Even with this, I struggle to get through a day without the battery dying on me. 
    I recomend that you buy an external portable charger like the:
    TeckNet® iEP387 7000mAh
    so that you can charge on the go.

  • Treo 700 with paralles windows XP

    I cannot get my HotSync to work on Windows Parallels. It keep telling me that COM1 is already in use. Is there a way to change the COM port. It synced fine when I was running windows in Boot Camp but hasnt synced since Parallels has been running.
    Thaks

    I have never seen a file like that in My Documents.  If my doucments are lost how do I set up a file on my PC where the documents are stored when I perform a hotsync?
    Post relates to: Treo 755p (Verizon)

  • Treo 700 freezes or locks up; can't get incoming calls

    It just locks up all the time and it doesn't ring when it is locked up so I am missing most of my calls.
    Post relates to: Treo 700w (Verizon)

    I checked for similar problem reported and found one that was posted on Jan 18, 2006.(I tried it and it worked) It stated the following:
    After my comment.. I went on searching and found this article at another forume: http://www.aximsite.com/boards/showthread.php?t=112638&page=1&pp=20
    It is written for a different product (Axim) but apparently it's the same problem for Treo 700w as well... It has to do with Activesync irradic behaivor. I did all that it asked of me, now I wait and see if it works. You may want to try it...

  • Treo 700, I want to move from MissingSync back  to iSync HELP

    Long story short: got a replacement Palm Treo700 phone. Missing Sync doesn't like that---replacement Treo crashes all the time now. I want to go back to using my iSync. I've uninstalled MissingSync but now I can't sync with iSync, it errors out. So my Treo is relatively useless except as a phone and whatever calendar, phone book data is still in it. Any advice I will appreciate!
    thanks!
    --Kevin
    Here's my HotSync Log:
    HotSync 3.2.1 started 8/8/07 3:08:23 PM
    Local Synchronization
    Install conduit not found
    iSync Conduit starting 8/8/07 3:08:23 PM
    SyncOpenDB returned 16388 for database AddressDB, creating a new database 8/8/07 3:08:24 PM
    Warning: Could not create database AddressDB (return code 16395), ignoring database 8/8/07 3:08:24 PM
    iSync Conduit: Got back NULL from rendezvous for request BladeGetAllRecords 8/8/07 3:08:24 PM
    iSync Conduit: Sending Error Response 1: iSync Conduit: Could not find database AddressDB 8/8/07 3:08:24 PM
    iSync Conduit: received NULL message, disconnecting... 8/8/07 3:08:24 PM
    OK iSync Conduit
    OK Media
    OK Memos
    Memo Pad did nothing
    Install conduit not found
    Backup conduit not found
    Last sync time and PC ID updated on handheld
    HotSync Complete 8/8/07 3:08:26 PM

    I agree that it's a step backward.
    Yes, it's a Verizon Wireless phone, however it is clearly documented on the MarkSpace site if you sync a new phone with your "old" software without making the necessary adjustments, it will crash. I, of course, did not think that the new phone would cause this problem so I just synced it. whoops.
    Now I just want to fix the problem and once I do so I will move back to MissingSync.
    http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2697

Maybe you are looking for

  • Scheduling a workbook where does the report write too?

    I want to put some report jobs in the scheduler in the Discoverer desktop how can I tell Discoverer where to write the reports either in PDF or Excel format? Thanks, So Much

  • Returning XML from CF for xmlHttpRequest

    Greetings, Not sure what I'm doing wrong here, but I can't seem to get a .cfm page to return the necessary xml for use in my xmlHttpRequest javascript code. I know the problem doesn't exist within my javascript code......if I build the URL to connect

  • Unhandled exception when exporting to EXCEL

    Hello, When I am exporting some reports, Desktop Intelligence crashes (error message at the end of this post). I work on Window XP SP2. My Desktop Intelligence release is 11.5.0.0. It happens when I try to save with EXCEL format (no problem with PDF

  • Samba server cannot be accessed through Finder's 'Network'

    Hi, First off, I'm not sure that this is the right forum for me to post this topic, but all the Samba related questions seemed to be coming from here. I don't own a computer with Windows, so I'm not interested in Windows compatibility per se, but I a

  • 3D toolkit

    Am using 3D toolkit to import a large pro-e assembly. Imports ok (about 360 meg), but when I try to save as a Rh binary format the program freeze's and creates an error log. Unable to find the error log in the directory that I am working in. Using Wi