Treo 700P external antenna jack

I just recently purchased a Treo 700P and a external antenna adaptor, the adaptor does not fit my phone. When I was shopping for my phone I looked at a new Treo 700P at the Verizon store and saw that it had a external antenna jack. The jack on the new phone was much smaller than the one that is on my phone. Did Palm at some point in time change the dimensions of the external jack? My jack is gold colored and has the appearance of a mini rca jack with a center hole that takes a thick center conductor.
Post relates to: Palm IIIc

gjkozy, the fault is with the Vendor who sold you the phone and didn't give you a disk with it, not Palm's...
Palm supplies a disk with every new phone that is sold. Did the vendor lie to you when the phone was sold? Or was it listed as "Phone and charger Only"?
The disk cannot be downloaded for free due to the fact there are third-party, copywritten programs on each one. These are not "free for the taking" by anyone wanting to click on a download link.
There are dozens of free Solitaire games available on www.freewarepalm.com. There are lots of Voice Dial programs for sale on the internet. Instead of spending money for the old disk, why not just purchase an updated Voice dialing program?
BTW, I'm assuming you know that no PalmOS phone can Voice dial through a BlueTooth earpiece. It's a limitation of the OS. If that is the goal of getting Voice Dial software, save your money!
I'm sorry about the antenna problem, I have no suggestions for that.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Models that turn off integrated antenna when using antenna jack.

I am looking for a cell phone that has an external antenna jack AND will turn off the integrated antenna when the external jack is inserted. Lets define the term " integrated" as being an internal antenna or the permanent attached external or nub style. This can be on the market now or on the used market. The Treo line, even the old ones, is my primary interest but only because i have tried them and I could check email. Any HP/Palm model cell phone would be fine even if it is only available on the used ebay market. Knowing what models DO and DO NOT have an external jack and knowing what ones WILL and WILL NOT turn off the antenna next to my head will help me narrow down my options. So knowing a model will not do as I want is just as valuable. Thanks for the help. Pete I try to buy local. With cell phones that is hard for obvious reasons. HP has many workers in my hometown so i will support them first. If you can think of a non-HP or PALM company that offers this option please let me know and I will add it to the backup list.
Post relates to: Palm Pilot

Set all destinations to always ask and select no whenever the phone gives you a request, set Maps to offline, and set location to just use intergrated GPS. By the way, just been to Portugal using Vodafone and data charges only about £5 for week, and they've just improved allowances, may be worth checking your service providers web site and see if it's necessary to bother about data roaming, they all tend to follow each other, and Data roaming charges in europe seem to be coming down !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

External Antenna Not Recognized

I am having trouble with a weak signal on one of my Mac PB laptops(titanium model) when I am in the furthest bedroom from my Airport, so I recently purchased a used Dr. Bott external antenna for my AEBS (the white dome-shaped one) which has an external antenna jack. I powered down everything and disconnected the ATT modem, the AEBS, connected the antenna and then proceeded to power up everything. I still get an internet connection on all of my computers, but there is no noticeable difference in signal strength. I was under the impression that the AEBS would recognize the antenna and it would show up in the Airport Admin Utility. Is there some kind of software that needs to be installed or uploaded to the AEBS? I tried disconnecting and reconnecting everything a second time but got the same results. Are there any other Dr. Bott antenna/AEBS users out there that have done this with success? Perhaps I'm overlooking something obvious or the antenna is inoperable. Thanks for your feedback.

These are the SoundStick speakers that connect using a regular mini-jack to the iMac audio output, correct? I ask, because earlier SoundStick speakers connected using USB.
If you connect regular headphones, such as iPod earbuds, to the iMac's audio output mini-jack, do they work? If they do not, the problem is more general than the SoundStick speakers.
If you connect the speakers to some other device, such as an iPod, do they work?
As a test, you can create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account, where you will be using default user preference settings for Snow Leopard. Do the speakers work in the new account?

Palm T|X Upgrade to Treo 700p and Revert Back to T|X Due to 700p Problems. Now I Can't Update the T|X

Here's the story. I am a long-time Palm power user and I have rarely been stumped but I am very stumped right now. I have used my Palm T|X for several years without any sync problems. I upgraded to a new Palm Treo 700p (Verizon) so I can carry one device instead of a PDA and a cell phone. I initially migrated my data from the T|X to the Treo 700p with no major issues. The Treo 700p worked fine for a couple of weeks until I started using the camera. After I started taking pictures and storing them in the on-board memory, wierd things started happening such as screen freeze-ups, screen white-outs, and processor delays. After talking with other Palm users, I was informed that this behavior is typical of the 700p when pictures are stored in on-board memory and that I should move the pictures to my SD card.
I moved the pictures to the SD card and perfomance improved. However, after another week or so, the freeze-ups started again. Everyone that I know who has a 700p or 700w reports the same issues so I'm starting to believe that the 700p has design flaws or bugs that were never fixed. Due to the frustration and productivity losses that I sustained with the Treo 700p, I decided to revert to my trusty T|X.
I initially started using the Treo on 8/12/2009 and I synchronized the T|X to the desktop before synchronizing the data to the 700p. On 09/16/2009 I started trying to re-synchronize the T|X. I did a hard reset and memory clear on the T|X so all of the updated data in the desktop could come over to the T|X without duplicates. However, when I synchronized the T|X, my data was only updated as of 8/12/2009 even though the palm desktop has data updated up to 9/16/2009!!
Please explain what is keeping all of the updates from coming over to the T|X. Thanks for the help.
Post relates to: Treo 700p (Verizon)

Are you sync'ing the 700p to the same username in Palm Desktop as the TX?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device. The TX does not have a camera and you are sync'ing the backup folder for theTX that does not have a camera app. to the 700P.
Click on the following link to the kb.palm.com webpage for the article regarding Upgrading from a previous Palm OS handheld.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
I would suggest exporting the data from the current username, create a username for the TX and import the data to that username and only sync the TX to that name. You will need to rename the backup folder in the current username to backup.old, hard reset the 700P and sync to the current username. You will need to hard reset the TX once you have the data in Palm desktop in a seperate username to remove the backup folder contents on the TX.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your 700P device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
For reference purposes, click on the following link for the support page for your TX device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Message Edited by cygnusX1 on 09-18-2009 03:33 PM

External Antenna Adapter for Centro?

I'm looking for an antenna adapter so I can attach an external antenna for my new Centro. I realize that it's brand new, so I haven't seen any specific adapters for it. However, are there other phones (like older Treos) that use the same size?
If I don't find one, I'll have to return it because the signals are terrible at my house without an antenna.
Post relates to: Centro (Sprint)

AT&T is supposedly experimenting with "femtocells" (I think I spelled that correctly!)
Small stations that rebroadcast cellular reception, similar to Wifi routers.
Article here:
http://www.phonescoop.com/news/item.php?n=2970
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

WAP200E and WAP200 as repeaters, external antennas, poor signal

I am having some weird things happen...
I have setup a WAP200E external w/o optional antenna and using (2) WAP200 internal units in separate buildings setup as repeaters. I have added a external
Yagi 10Dbi directional antenna to both repeaters with short cables and using the standard antenna for the internal wireless needs.
Both buildings are about 200' line of sight from the WAP200E with a angle of less then 45 degrees from the WAP200E,
I am getting a signal that continually jumps from 20% - 60% Channel keep changing etc... looks like a typically poor signal connection
I am able to access the internet from either repeater, but not reliably
Question 1: External Antenna....
I was going to install a similar external Yagi antenna on WAP200E but I was reading that the external antenna in turned on automatically when the WAP200E
senses a antenna. Cisco only certifies one particular antenna to connect to the WAP200E and that is the HGA9N which is a 9DBI omni directional antenna
I would much rather use a directional antenna, but I was reading that the WAP200E may not reconize any other antenna's, plus I cant find any way to determine if the WAP200E actually turns on the external antenna. Does anyone have any experience using the WAP200E with external antennas?
Question 2:
SSID's on repeaters
On the WAP200E and WAP200 units, It show that that repeaters can have unique SSID's I tested them using the same SSID as the A/P and also with unique SSID's Which approach would be the more reliable?
Question 3:
Freq Channels setting:
Typically I would set the channel to be fixed on all three units to keep them from hopping from channel to channel. Is my logic correct?
Is there any way to determine which channel is the best, beside trial and error?
Also, can I lock the speed to a slower setting to help improve reliability?
Question 4:
Bridging:
I was considering setting up one of the repeaters as a bridge can the WAP200E A/P handle communicating with a bridge and a repeater at the same time?
Does anyone have any experience using these as bridges? I see a few issues online regarding briging with these units
Wireless is tough enough, but flakey wireless product can make you wish had a wire
Firmware... 1.20 on the WAP200E A/P unit.. I guess I will try 1.20a but the blogs say it doesnt matter
Firmware on the WAP200 unit is unknown at the moment
Thanks in advance

Update...
After speaking with Linksys support staff, they informed me that the antenna jacks on the WAP200 are slightly different
One jack is TX & RX and the other jack is RX only...
It is not documented or labeled as such on the device.
The support person told me it was the right jack when facing the rear of the unit with the network jack facing you. but this is the way I
had it configured... so for giggles I swapped the antenna jacks and presto it works fine
Many thanks
Bob

External Antenna for 8120

Is there an external antenna booster that is available for the Pearl 8120? I believe there is no jack for it. Would a wireless unit work?

No, not for the device.
There are wirless signal booster kits you can buy, I don't know of a good one, but I know they are available.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I use a GSI external antenna for WiFi I first get a message that "Firefox is already running but not responding etc", and then Firefox crashes. Can anyone help please?

Because of weak WiFi signal I need to use an external antenna (GSI USB wireless WIFI long range network adapter). My computer can see the signal clearly and shows that I am connected to the right network. But when I try to launch Firefox I get a message that "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." When I click "OK" Firefox tries to load websites but gives up and reports "Problem Loading". It looks like Firefox is having trouble "seeing" the signal from the external antenna. What do I need to do please?

Try Ubuntu support, I don't think your problem is with Firefox - it will use the connection that the Operating System "makes". I'm a real noob with Ubuntu myself, and don't think I can help you figure out the problem.
http://ubuntuforums.org/

Palm Treo 700p Cannot install. Windows Vista looking for Drivers

Installed Palm software and synced on my Dell with no issues.
Went to install on 2nd PC with Windows Vista Home. Issues. Got new download for Vista 32 and downloaded off site.
Same error puts me in a circle. System finds new hardware. Looks to install driver. Can't find Drive on CD or Hardrive and so keeps in loop. Cannot finish 1st "sync" without driver so install does not complete.
Please advise:
Can I use the Palm device on two seperate PC's (One on NT running fine..now adding Vista Home).
How do I get the drive installed?
How do I be sure NOT to overwrite the data on the Palm when I sync the 1st time on the 2nd pc.
Thanks
Post relates to: Treo 700p (Verizon)

Hello jpmill2 and welcome to the Palm forums.
1. Please make sure that your Windows Vista account is a member of the Administrators group. I would also be sure to check that antivirus software is disabled during the install process.
2. You can use the Treo 700p with more than one computer. I sync my Treo with my office PC running Windows XP SP2 and my Vista Business SP1 machine at home. (And a Mac, just for good measure.)
3. The USB driver for the Treo 700p is obtained by installing Palm Desktop 4.2 (bundled on the Treo 700p software disc) or by installing Palm Desktop 6.2 by ACCESS for Windows [Vista]. You should install the software first, and then connect the Treo after the install is complete. If prompted to HotSync during the install, I aways Skip it.
4. If you Skip the HotSync during the Palm Desktop isntall, you can create a new HotSync ID on the computer with the same name as the HotSync ID on your Treo. Then set the conduits to Handheld overwrites Desktop and then sync.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Why does Windows think my Treo 700p is a Treo 680?

I have gone through a long , frustrating fruitless attempt to get my Palm Treo 700p to connect to my new Windows Vista computer. here are the steps I have gone through...
Palm not connected to computer yet
1. run "PalmDesktopWIN62"
2. select english
3. install shield extracts a whole bunch of stuff
4. "welcome to the installshield wizard for palm desktop by ACCESS"
5. press next
6. accept EULA
7. download latest settings from internet
8. complete download, install
9. install tells me windows media player is in use when it is not...how do i close something that is already closed?
10. create desktop shortcut
11. congratulations! you have installed the palm desktop. now configure the sync software and perform your first hotsync
12. enter a new user name (God forbid it be able to get that off the Palm itself...now i have to remember what name i used before)
13. configuring and restaring hotsync
14. connect USB
15. WINDOWS HAS FOUND NEW HARDWARE!!! imagine that! it asks me to locate and install driver software.
16. ignore annoying windows message and press the hotsync button
17. "connecting with the desctop using cable"
18. still waiting for it to connect
19. still waiting
20. imagine that...it didn't connect.
21. ok...now i'll try to locate and install the driver software (didn't i do that in step 1?)
22. "installing device driver software" ... "insert the disk that came with you palm handheld"
23. yell at the top of my lungs "IF THAT WERE AN OPTION I WOULD HAVEW ALREADY DONE THAT YOU STUPID PALM DEVICE!!!"
30. after much searching, windows tells me that my Palm Treo 680 is not compatable with Vista. too bad I have a Palm 700p, not a 680.
31. yell at computer again.
so...given that my computer thinks I am plugging in an uncompatable device to my computer...i am outta luck.
since I do not have a disk that Vista finds acceptable, how do I get the driver online I need?
Post relates to: Treo 700p (Sprint)
Message Edited by IHateMyPalm on 08-24-2008 07:47 PM

Have you put it into a different USB port than usual? it could be the autoplay settings.
You can check by right clicking the start button, click control panel then double clicking Default Programs then choosing auto play settings, the option will be under removable drives, alter it to whatever suits your needs.

Calendar sync issues with Windows XP, Treo 700p and Outlook 2003

Hi. I have been unable to sync my Calendar (Contacts, Tasks and Memos are fine). I have uninstalled/reinstalled, removed versamail, provided end dates for all of my datebook entries, ran the dbscan, etc. Here is the error I get in my log.
Outlook Calendar synchronization aborted
Duration: 4.1 seconds
Outlook Calendar
OLERR:05-0013
OLERR:05-000F
OLERR:0D-000E
OLERR:0D-0004
OLERR:0D-0001
- Recovery Sync
OLERR:15-0002
OLERR:06-0001
Thanks in advance.
Post relates to: Treo 700p (Verizon)

Forgot to mention two things:
1. Running Palm 6.2, and
2. All the calendar data is on my handheld.
Post relates to: Treo 700p (Verizon)

IMac 3.4 GHz Intel Core i7, running Lion 10.7.3, won't recognize external speaker jack, any suggestions?

iMac 3.4 GHz Intel Core i7, running Lion 10.7.3, won't recognize external speaker jack, any suggestions? Got a brand new iMac and purchased external speakers for same. Hooked them into external speaker jack and the computer does not recognize the external speaker jack. I then plugged them into the external head phone jack and the computer recognized the head phone jack. How can I get the computer to recognize the speaker jack?

Thanks "a brody," my mistake, I was mistaking the "audio in" jack for a speaker output jack. I have some Klipsch ProMedia 2.1 speakers with a built in amplifier that I am using and they sound beautiful. I do have them plugged into the correct jack, but was thinking there was a speaker out put and headphone out put.
Thanks again for correcting me, I feel much better now that I know my brand new iMac isn't defective, lol.

Has anyone had any success with an external antenna on a UMW190?

Although I am getting good service from my UMW190 without an external antenna, I am in a low signal area and would like to have rock solid coverage.
I have tried a 1900Mhz yagi, a blade antenna, an omni, and a grid antenna. I am not seeing any difference in signal strength at all regardless of whether or not an antenna is connected and which way it is pointed. I have also tried two different pigtails form two different sources, and even borrowed a second UMW190 and tried it, all with no success. I know exactly where the tower serving my house is located, but I did try each of the directional antennas in a full 360 degree circle, stopping every few degrees to see if the RSSI improved. I tried both polarities too, although I understand it should be vertical.
When I contacted Verizon customer support they had very little information about it. I contacted Pantech, and they told me that support for this device is now handled by UTstarcom. UTStarcom told me that support for this device is now handled by Personal Communication Devices. When I contacted them the response was (and I quote) "We don't have any information on any external antenna support of our devices".
So I throw myself on the mercy of the Gurus here in the forum.
Am I missing something obvious? Is there a command that "activates" the external antenna connector? Does the connector even have anything connected to it inside the modem?
Any guidance on this would be greatly appreciated!
-Rick

Usually the external antenna works best where service is obstructed by certain materials and the external antenna is placed in a different area . If the signal is steady for the external antenna and the UMW190 in the area where you are using the devices, that would be the general signal strength of that area.
The recommend accessory for your device can be found at the link below:
Copy and paste the link below into your browser's address bar.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=11424

Isync and TREO 700p for VERIZON

I just purchased a TREO 700p and iSync is saying that this is not a supported device. It says that SPRINT'S Treo 700p is supported, but not VERIZON'S. That's absurd.
Does anyone know if I can make the syncs successful with my Verizon TREO 700p?
If not, does nayone know when the VERIZON Treo 700p WILL be supported?
THANK YOU.

here is the error i get from palm software. i uninstalled missing sync.
HotSync 3.2.1 started 6/2/06 8:26:00 AM
Local Synchronization
Installed ADD052SData
Installed ADD052VData
Installed AddIt-Content
Installed AddIt
Installed AddItdeDEdata
Installed AddItesESdata
Installed AddItfrFRdata
Installed AddItitITdata
Installed AddIt_newstips
Installed Addit_Promotion-Content
Installed AddItptBRdata
Installed AdditShop-Content
Installed AddressCitiesDB
Installed AddressCompaniesDB
Installed AddressCountriesDB
Installed AddressingLibDomains
Installed AddressingLibRecent-HsCh
Installed AddressingLibRecent-HsCi
Installed AddressStatesDB
Installed AddressTitlesDB
Installed AirSAMPrv
Installed BgndService
Installed Blazer Bookmarks
Installed Blazer Cookies
Installed Blazer Field Autofill
Installed Blazer Find Autofill
Installed Blazer URL Autofill
Installed CalendarLocationsDB-PDat
Installed CarrierProfiles2
Installed CheckSyncClient
Installed ClientObj
Failed to install ConduitMonitor.prc
- File already exists on the handheld
Failed to install ConnectionMgr50DB.pdb
- File already exists on the handheld
Installed CSRecordOutEAContentDB
Installed CSRecordOutSyncFiledDB
Installed CSRecordOutSyncInboxDB
Installed CSRecordOutSyncOutboxDB
Installed EAContentDB
Installed Graffiti ShortCuts
Installed HSTraceDatabase
Installed IIDataLib
Installed locLCusLocationDB
Installed locLDefLocationDB
Installed MemosDB-PMem
Installed Messages Database
Installed MIAttachLib
Installed midataidcache
Installed MIDataLib
Installed MIDI Ring Tones
Installed Missing Sync
Installed MM Text Lookup FPI
Installed MMConduit-asc6
Installed MMConfigFPI
Installed MMDiskLib
Installed MMIDCache0
Installed MMIDCache1
Installed MMIDCache2
Installed MMIDCache3
Installed MMIDCache4
Installed MMIDCache5
Installed MMIDCache6
Installed MMIDCache7
Installed MMNotify
Installed MMSmartAdd
Installed MMWizard
Installed MSLSA Data
Installed NetworkDB
Installed NetworkProfiles2
Installed PassThruSync
Installed PhoneCallDB
Installed PhoneFavorites2DB
Failed to install PmTraceDatabase.pdb
- File already exists on the handheld
Installed PocketTunesPL-TNpt Def PL
Installed psysLaunchDB
Installed Queries
Installed SAMgr
Installed Saved Preferences
Installed SLEventNotifications
Installed SndFile Ring Tones
Installed SPCategoryDB-SpPh
Installed SplashPhoto
Installed SyncMail
Installed System MIDI Sounds
Installed TimeCopy
Installed VersaMail
Installed VMNetLogging
Installed VpadDB
Installed AirSAM
Installed AirSAMPrv
Installed BgndService
Installed IIDataLib
Installed MIAttachLib
Installed MIDataLib
Installed MMConduit-asc6
Installed MMConfigFPI
Installed MMDiskLib
Installed MMHtmlPlugin
Installed VersaMail
Installed MMNotify
Installed Photo/Video
Installed MMPluginMGR
Installed MMPRCPlugin
Installed MMSDCard
Installed MMSmartAdd
Installed MMTextPlugin
Installed MMUnzipPlugin
Installed MMUpgrade
Installed MMVCal
Installed MMVCardPlugin
Installed MMWave
Installed MMWizard
Installed MMWordPlugin
Installed MultiMail
Installed PalmVMFontLibrary
Installed PassThruSync
Installed SAMgr
Installed MM Text Lookup FPI
Installed VMNetLogging
OK Install with 3 message(s)
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up CarrierProfiles2.pdb
Backed up Queries.pdb
Backed up NetworkProfiles2.pdb
Backed up VMNetLogging.prc
Backed up AirSAMPrv.prc
Backed up AirSAM.prc
Backed up IIDataLib.prc
Backed up PalmVMFontLibrary.prc
Backed up MMDiskLib.prc
Backed up MIAttachLib.prc
Backed up MIDataLib.prc
Backed up Missing Sync.prc
Backed up PassThruSync.prc
Backed up ConduitMonitor.prc
Backed up SyncClient.prc
Backed up MMNotify.prc
Backed up MMConduit-asc6.prc
Backed up BgndService.prc
Backed up VersaMail.prc
Backed up SAMgr.prc
Backed up AdditMyPalm-Content.pdb
Backed up MMSmartAdd.prc
Backed up MM Text Lookup FPI.prc
Backed up MMConfigFPI.prc
Backed up MMWizard.prc
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/2/06 8:28:30 AM
HotSync 3.2.1 started 6/2/06 8:33:25 AM
Local Synchronization
OK Install
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up AddressingLibDomains.pdb
Backed up AddressingLibRecent-HsCi.pdb
Backed up AddressingLibRecent-HsCh.pdb
Backed up ADD052SData.pdb
Backed up ADD052VData.pdb
Backed up Blazer Bookmarks.pdb
Backed up EAContentDB.pdb
Backed up CarrierProfiles2.pdb
Backed up Queries.pdb
Backed up CSRecordOutSyncOutboxDB.pdb
Backed up CSRecordOutSyncInboxDB.pdb
Backed up CSRecordOutSyncFiledDB.pdb
Backed up CSRecordOutEAContentDB.pdb
Backed up VpadDB.pdb
Backed up locLDefLocationDB.pdb
Backed up NetworkDB.pdb
Backed up locLCusLocationDB.pdb
Backed up MMIDCache0.pdb
Backed up MMIDCache1.pdb
Backed up MMIDCache2.pdb
Backed up MMIDCache3.pdb
Backed up MMIDCache4.pdb
Backed up MMIDCache5.pdb
Backed up MMIDCache6.pdb
Backed up MMIDCache7.pdb
Backed up HSTraceDatabase.pdb
Backed up midataidcache.pdb
Backed up Messages Database.pdb
Backed up NetworkProfiles2.pdb
Backed up PocketTunesPL-TNpt Def PL.pdb
Backed up SndFile Ring Tones.pdb
Backed up MSLSA Data.pdb
Backed up Blazer URL Autofill.pdb
Backed up Blazer Field Autofill.pdb
Backed up VMNetLogging.prc
Backed up SyncMail.prc
Backed up AirSAMPrv.prc
Backed up AirSAM.prc
Backed up IIDataLib.prc
Backed up PalmVMFontLibrary.prc
Backed up MMDiskLib.prc
Backed up MIAttachLib.prc
Backed up MIDataLib.prc
Backed up Missing Sync.prc
Backed up PassThruSync.prc
Backed up ConduitMonitor.prc
Backed up ClientObj.prc
Backed up CheckSyncClient.prc
Backed up SplashPhoto.prc
Backed up TimeCopy.prc
Backed up MultiMail.prc
Backed up MMNotify.prc
Backed up MMConduit-asc6.prc
Backed up MMUpgrade.prc
Backed up BgndService.prc
Backed up VersaMail.prc
Backed up SAMgr.prc
Backed up AddIt.prc
Backed up PhoneCallDB.pdb
Backed up SPCategoryDB-SpPh.pdb
Backed up AddressCitiesDB.pdb
Backed up AddressCompaniesDB.pdb
Backed up AddressCountriesDB.pdb
Backed up Blazer Cookies.pdb
Backed up AdditShop-Content.pdb
Backed up AddItptBRdata.pdb
Backed up Addit_Promotion-Content.pdb
Backed up AddIt_newstips.pdb
Backed up AddItitITdata.pdb
Backed up AddItfrFRdata.pdb
Backed up AddItesESdata.pdb
Backed up AddItdeDEdata.pdb
Backed up AddIt-Content.pdb
Backed up PhoneFavorites2DB.pdb
Backed up Blazer Find Autofill.pdb
Backed up CalendarLocationsDB-PDat.pdb
Backed up SLEventNotifications.prc
Backed up psysLaunchDB.pdb
Backed up Graffiti ShortCuts.prc
Backed up MMSmartAdd.prc
Backed up MM Text Lookup FPI.prc
Backed up MMConfigFPI.prc
Backed up MMTextPlugin.prc
Backed up MMHtmlPlugin.prc
Backed up MMPRCPlugin.prc
Backed up MMVCal.prc
Backed up MMVCardPlugin.prc
Backed up MMWordPlugin.prc
Backed up Photo/Video.prc
Backed up MMWave.prc
Backed up MMPluginMGR.prc
Backed up MMWizard.prc
Backed up MMUnzipPlugin.prc
Backed up MMSDCard.prc
Backed up MIDI Ring Tones.pdb
Backed up System MIDI Sounds.pdb
Backed up Saved Preferences.prc
Backed up AddressStatesDB.pdb
Backed up AddressTitlesDB.pdb
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/2/06 8:34:40 AM
HotSync 3.2.1 started 6/2/06 8:38:20 AM
Local Synchronization
OK Install
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up ConduitMonitor.prc
Backed up psysLaunchDB.pdb
Backed up Saved Preferences.prc
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/2/06 8:38:25 AM
HotSync 3.2.1 started 6/2/06 8:38:52 AM
Local Synchronization
OK Install
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up ConduitMonitor.prc
Backed up psysLaunchDB.pdb
Backed up Saved Preferences.prc
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/2/06 8:38:58 AM
HotSync 3.2.1 started 6/2/06 8:43:14 AM
Local Synchronization
OK Install
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up CSRecordOutSyncInboxDB.pdb
Backed up Messages Database.pdb
Backed up ConduitMonitor.prc
Backed up psysLaunchDB.pdb
Backed up Saved Preferences.prc
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/2/06 8:43:20 AM
HotSync 3.2.1 started 6/3/06 5:38:16 PM
Local Synchronization
Installed AirSAM
Installed AirSAMPrv
Installed BgndService
Installed IIDataLib
Installed MIAttachLib
Installed MIDataLib
Installed MMConduit-asc6
Installed MMConfigFPI
Installed MMDiskLib
Installed MMHtmlPlugin
Installed VersaMail
Installed MMNotify
Installed Photo/Video
Installed MMPluginMGR
Installed MMPRCPlugin
Installed MMSDCard
Installed MMSmartAdd
Installed MMTextPlugin
Installed MMUnzipPlugin
Installed MMUpgrade
Installed MMVCal
Installed MMVCardPlugin
Installed MMWave
Installed MMWizard
Installed MMWordPlugin
Installed MultiMail
Installed PalmVMFontLibrary
Installed PassThruSync
Installed SAMgr
Installed MM Text Lookup FPI
Installed VMNetLogging
OK Install
To Do List did nothing
Tasks synchronization failed
“Tasks” failed (error = #16397)
OK Media
OK Memos
Memo Pad did nothing
Date Book did nothing
Contacts synchronization failed
“Contacts” failed (error = #16397)
Calendar synchronization failed
“Calendar” failed (error = #16397)
Address Book did nothing
OK Install
Backed up CarrierProfiles2.pdb
Backed up Queries.pdb
Backed up CalculusDB.pdb
Backed up MultiMail Messages.pdb
Backed up MultiMail Disconnected.pdb
Backed up MultiMail Attachments.pdb
Backed up NetworkProfiles2.pdb
Backed up 6-3-06-1-38-am-Vpad.pdb
Backed up SMS QuickText.pdb
Backed up Missing Sync.prc
Backed up ConduitMonitor.prc
Backed up SyncClient.prc
Backed up IMPlus_Core.prc
Backed up BtExgLibDB.pdb
OK Backup
Last sync time and PC ID updated on handheld
HotSync Complete 6/3/06 5:39:18 PM
-------------------------------------------------------------------------------- --

Treo 700p sync on Macintosh

Has anyone been able to successfully sync a Palm Treo 700p (Verizon) with a Mac?

I was able to successfully sync the Treo 700p (Sprint) on a MacBook Pro 15" by installing the latest Mac Palm Desktop Software (not available for 700p yet, so I downloaded the 650 version) and followed installation instructions, restarted, then opened iSync. In iSync, I enabled Palm OS Device under the Device Menu and then opened Hot Sync (in Applications folder) and in "Conduit Settings" double-click iSync conduit and check off enable for this device. Now your Treo will show in iSync and you can set your settings in iSync and click Sync (need to press hot sync button on Treo if using Bluetooth connection). Hope this helps!

Treo 700P external antenna jack

Similar Messages

Maybe you are looking for