Treo 700W blue tooth w/daimler Chrysler uconnect not working after installing updater.

Anyone having problems with their 700W blue tooth working after installing the updater? My Jeep Grand Cherokee's blue tooth uconnect system was working flawlessly until I installed the updater. Now it will not work. I've went through all of the procedures several times. The phone will discover the uconnect but when you put in the 4 digit pass code that you have given to the vehicle it will not connect thought the secure connection. I have called Verizon and Daimler Chrysler and they both do not know why it will not work. I have reset the uconnect system on the vehicle per their instructions. Any help would be greatly appreciated.
Post relates to: Treo 700w (Verizon)
This question was solved.
View Solution.

I'm having the exact same problem - Treo 700W (verizon), Dodge UConnect circa 2005 (Grand Caravan  [tough to admit, but yes a mini-van]), running Win XP, Active Sync 4.2, USB connect with the Treo.
Had perfect connectivity until running the most recent update, now the Treo will initially recognize UConnect when attempting to pair the phone, but after supplying the 4-digit passcode, it won't connect.  It tells me the "passcode is incorrect...".  I'm 100% sure the passcode in correct.  I've tried deleting the phone from the UConnect multiple times and tried several different combinations of passcodes (0000, 1234, 1111, 2222, and many others) and all have the same result.
I've also successfully paired the Treo with other bluetooth devices, so it appears this is a UConnect - Treo problem.
Post relates to: Treo 700w (Verizon)

Similar Messages

  • Treo 680 Dial Pad not working after desktop update

    I was a Zire 72 user.
    I bought a Treo 690. As manual said, I installed Palm Desktop over my old Zire PD.
    Everythings works fine but two problems.
    1- The dial pad does not show the numbers for dial anymore.
    When I press the dial pad, nothing happens. If I use the 5 way navigator, I can switch between all the other 4 tabs, but it acts like the dial pad tab does not exist.
    2- Contacts were not updated ion my phone. I guess it's because I'm synchronizing with outlook 2007. Should I install 2007 conduit updater?
    I'm thinking it would be better to uninstall PDesktop, reset my palm and start installing each application one by one.
    Tnx
    Diego

    You can uninstall current version of Skype from the control Panel and you can install Special Version.
    http://www.skype.com/go/getskype-sse
    and disable automatic updating of Skype.
    In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • HT204368 after downloading ios7, iTunes no longer works through my blue tooth (car)- but other programs (pandora) work just fine

    After downloading ios 7.02, iTunes no longer works through my blue tooth (car), but other music apps work fine.  iTunes and iTunes radio work fine though headset and on speaker, but won't work through bluetooth.
    Anything that can be changed in 'settings' or with my iTunes so I can use it through my blue tooth?

    Hi, milljam7. 
    Thank you for visiting Apple Support Communities.
    Sometimes closing all applications open in multitasking and power cycling the device can resolve the issue.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    However, if you are still experiencing the issue I have included the best troubleshooting article.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    Jason H.

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • TS3253 I have iPad 2 and can't get it to see new Bose sound dock 10 also with blue tooth. iPhone saw it easily, not iPad...any help?.

    Any help in getting iPad's blue tooth to find any device is helpful.

    Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into  Settings > General > Accessibility > VoiceOver and turn it off.
    So to enter your passcode you first need to tap the 'slide to unlock' button to hightlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode.
    The manual (http://support.apple.com/manuals/#ipad) also that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • HT3887 I turned my blue tooth off now I can not get into the computer

    I have a wireless keyboard and I turned off the blue tooth so now the computer is asking me for the pass code but I can not type it in because the Bluetooth is off

    Log into iCloud.com and turn remove the device from the account.

  • Trying to send file through blue tooth-says Unable to Connect/Not Supported

    I am trying to send video files from my Motorola phone to my Macbook pro. I set everything up on my Mac and set it up/activated on my phone. However, when I try to send the file I keep getting a message saying "Unable to Connect: Macbook Pro is not supported".
    I also had an issue trying to have a file sent to me via another Macbook Pro/Blue Tooth.
    How can I fix this?
    Thanks.

    Hi,
    I think u need to set up the SMTP  So that u can send the email.
    Regards
    Mustafa.

  • Blue ThinkVanta​ge button doesn't work after installing Win 7

    I upgraded the OS on my T510 from Windows 7 32-bit to Windows 7 64-bit, and now the blue ThinkVantage button does not work. I re-installed Rescue & Recovery, and it is working. Should I be concerned about the blue button? Is there any way to fix this problem? Thanks!

    @Christaylor,
    Download the TVSU then run it and it will install all the drivers and software needed to run your Win 7 x64 bit properly.
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS012808
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Portg R500 - Blue Screen and keyboard mouse are not working

    Hi All,
    I am using windows XP, well I was not any more due to below problem.
    Laptop blue screened and now any time it goes to windows xp screen blue screen comes and reboot the system. Its not working in safe mode at all. Keyboard any mouse are not working. I cannot even go to BIOS.
    I tried to plug a USB keyboard but still its same. I cannot even boot from CD.
    Please could some one advise what do I need to do in order to resolve the problem.
    Thanks in advance.
    Nysoh

    Hey,
    How you can test it in safe mode if keyboard doesnt work? I mean before Windows starts you have to press F8 key and then go down to select safe mode. Therefore you need the keyboard
    In your case I would try to remove the battery and AC/DC adapter for at least one hour. Then connect both devices again and make sure battery is fully charged. Start your notebook and try accessing the BIOS setup and load the default settings.
    If Windows doesnt start you have to do a recovery installation I think. Some Windows files might be muddled up

  • N80 blue tooth & modem not working after severe hi...

    My N80 was involved in an accident where th phone was hit from the front. The screen was replaced by Nokia in Melbourne and all was tested ok (not sure how ok). After a few months I decided to use the phone, the BT and modem is not connecting to any devices.
    The cable connection works, but when I try to BT or connect to a hot spot, it does not work.
    Is ther any way to test if the modem is damaged and can it be replacred?

    Do you mean WLAN when you say modem? Easiest was to check if either is working is to scan, either scan for WLAN or scan for BT devices when you know that there is something around. For example you should see lots of BT devices in office or the bar.
    If you can't see anything after a few attempts then sounds like it got broken.

  • Blue tooth keyboard won't connect to macbook after ipad

    I can't connect the apple bluetooth keyboard to my macbook. It works OK with my iPad. Do I have to reconnect each time to the laptop?
    What am I doing wrong?
    Thanks

    Welcome to the Apple Support Communities
    On the device, open Settings > Bluetooth and turn Bluetooth off. Then, hold Power button of the keyboard until it turns off, and finally, turn your keyboard on and it will connect to your computer

  • Blu-ray does not work after update to windows 7

    Hi, couple months ago I have installed windows 7 on my HP Pavilion dv5-1070ew (previously there was pre-installed Vista). I've installed the newest version of HP MediaSmart DVD (4.0.3822) downloaded right from HP.com but unfotunately, when I'm inserting a BLU-RAY Disc it's not being played. HP MediaSmart DVD opens and it writes that "Disc is ready to play" (so it is able to see the disc), but when I click button "Play", the monitor starts to wink for a while and then nothing happens...
    Thanks in advance for any help
    This question was solved.
    View Solution.

    I would suggest downloading trial version of cyberlink power DVD from here http://www.cyberlink.com/downloads/trials/powerdvd​/download_en_US.html?affid=2581_853_290_12410_0_EN​... and check if we till have the same issue.
    But before doing that, I hope after the change of OS, you have installed all the required drivers like chipset, graphic, etc....
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Blue Ray player not working after upgrading to windows 7

    I upgraded my HP Pavilion  m9517c-b desktop PC bundle (part number FQ575AA) which includes:
    m9517c Desktop PC, part number FQ574AA# ABA   to windows 7 from Vista  home 64.
    This upgrade now prevents the HP mediasmart program to play blue ray DVD's  giving a message of
    " The content is protected     The content cannot be played in the current display mode" 
    I had no problems playing BlueRay DVD's or any other thing with Vista home 64.   I was looking for mediasmard driver updates but don't seem to find any that will allow blueray  DVD's to play.    Is there a solution to this problem.
    Thanks
    dmc

    Do you have more than one display connected to your computer (for example, a monitor and also a TV)? Typically you would get this error if you're trying to play a Blu-ray movie in dual display mode, so you'd have to pick one display or the other.
    If you have more than one display, or even if you only have one display connected, try toggling the display mode by pressing Windows (flag) key + P and select the one screen you want it to play on. Refer to Resolving DVD and Blu-ray Movie Problems (Windows 7) for other troubleshooting ideas.
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • Blue Yeti Pro Mic recognized but not working

    I just recently got a Blue Yeti Pro and I can't get it to work on my Mac. There is no sound coming out of it. It only seems to work when I plug in the headphones. The red light is on, I've tried restarting my Mac, plugging and unplugging the mic, updated my OS, switching usb ports. Nothing seem to work! HELP!!!

    WHEN IT'S SELECTED, THE INPUT VOLUME IS GREYED
    THAT IS NOT YOUR PROBLEM, SOMETHING ELSE IS:
    http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled

  • Mac Freezes on Blue Screen After Installing Updates! Help!

    hi
    Have just done the updates that were available for my wifes mac mini. All went well and it said restart to complete. I did this but when it restarted it would not get past the blue screen, the mouse cursor is there and moving but thats all.
    Now my problm is i haven't got a clue about mac's, the wife is away and don't want to tell her that i've managed to trash her Mac as she has got quite a bit on there. If it was windows it would be fine as am happy with that but it isn't and i am stuck!!!!!(read dead if i can't sort it out before she gets back!!)
    Now what i want to know is how can i basically get it back to where it was before installing the updtaes or can i get back to a state of working without deleting anything progs installed etc? With windows you can use there system restore after booting in safe mode. Is there a way i can do it with the mac or something along those lines.
    i know this is probably a pain post but i am stuck
    Cheers in advance for any help
    Mac Mini 1.66GHZ INTEL Dual Core   Mac OS X (10.0.x)  

    The only way to get back to a state before the updates is if a backup was made.
    As for booting in safe mode, you can try holding the shift key.
    If that works, it says that some attached peripheral needs an updated driver. Remove all third party peripherals, and see if it boots.
    If It doesn't boot, it is likely the directory is damaged, or the hard drive is very full, or the hard drive might be dying. You can also try zapping the PRAM:
    http://docs.info.apple.com/article.html?artnum=2238
    Unfortunately there is no way to tell the difference between the above possibilities, and if you use a directory repair utility on a dying hard drive, it may speed its death. How valuable is her data to her, and is it backed up anywhere?

Maybe you are looking for