TREO 700WX Battery

On two separate occasions, my TREO 700WX battery has rapidly lost its charge at a rate of 10% per hour or more with minimal or no usage. This causes me to virtually need to carry a power cord. For inexplicable reasons on both occasions the loss of battery power ceases spontaneously and the charge is then retained normally.  Has anyone else had this problem? Verizon is at a loss and the retail stores are useless. 
Post relates to: Treo 700wx (Verizon)

Over the past 2 weeks my battery in my 700wx (Sprint)  has started doing something like that also, and it also won't take a charge.  I leave it plugged in all day at work and all night at home and it continues to lose its charge and now it's completely off and won't charge back up.  I've only had the phone and battery 3 months, which seems like very little time for a battery to die.  I have only been charging it at home over night.  Now I charge it all day at work and still nothing.  I don't use it enough for the battery to run down daily like it's been doing and especially not enough for the battery to not charge.  Is it possible I got a bad battery and what is Palm's warranty policy regarding batteries.
Post relates to: Treo 700wx (Sprint)

Similar Messages

  • Treo 700wx VZW Battery Door

    I have searched Palm's website as well as called support to try and order a new back for a 700wx. How can I get a new part for an old phone?
    Post relates to: Treo 700wx (Verizon)

    Check out pdaparts they have a wide variety of parts and or accesssories
    http://www.pdaparts.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=_TREO
    Post relates to: Centro (Sprint)

  • Treo 700wx Mobile 6 Mail check for new mail

    I just installed Treo 700wx Updated 1.24 udate to Mobile 6 and now the email software searches (looking for changes) through all of my 16,000 emails.
    I did set to only download last 3 days in the mail setup screen but it searches through all 16,000 emails slowing down my Treo and using up battery. I could not find where I can set it to only search last 3 days for new email messages.
    Post relates to: Treo 700wx (Verizon)

    Vibha,
    Since your question is more dependent on the Messaging server, the "Messaging & Collaboration" section would be a better place to pose this question.
    A simple way to analyse which IMAP command we are sending to the iMS - you can initiate a snoop capturing
    the traffic between the Portal server and the iMS on the specific port (143 default for IMAP) during the desktop rendering.
    To my knowledge iMS is fully IMAP 4 compliant and hence the RECENT flag implementation will be adherent to the RFC specifications.
    You can perform the same check by logging into the iMS through command line.

  • Treo 700wx problem

    a couple days ago my VZW 700wx was giving me the message that my storage space was becoming critically low. i deleted a few .cab files and put it away. i was also outside of available coverage range while this was occurring.
    about an hour after that took place, i looked at the time on my phone and noticed my battery power was declining so i tried to shut it off. this is when the fun started.
    it wouldn't power off. i received several application crash errors (google maps, youtube app, etc). so, i figured it would be good to remove/replace the battery. at this point the Treo followed by WinMo 6 splash screen appeared and it just stayed there. i was preoccupied so back in the pocket it went and i got back on the road.
    further down the road when i was back within cell coverage, i picked up the phone and the WinMo splash screen was still up. so, i once again removed/replaced the battery. and the phone came up. as if it had been hard reset.
    this, of course, is a giant PITA, as i had several items that had not been backed up.
    here's the odd thing: my available storage is still critically low. i haven't done anything to the phone since the crash/reset except change a few user preferences. could it be that it wasn't a full crash or reset? has anyone seen this before? is there a possibility that i can retrieve the items i want to keep? if so, how?
    a few other observations...
    * emails, contacts, calendar were not wiped out but ActiveSync settings were.
    * MMS messages were not wiped out.
    thanks.
    Post relates to: Treo 700wx (Verizon)

    After the hard reset, the Treo will no longer have your contacts, calendar events, etc. did all your contacts get erased? If they did, any pictures on the Treo will be deleted except for the pictures that come pre-loaded in Windows Mobile.
    To see if the pictures are gone from the Treo look in the following location on the Treo,
    By default, pictures are stored in the My
    Pictures folder on your smartphone.
    This information is in the user guide on page 123.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/treo/700wx/verizon/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. Click on the learn tab for the user guide.

  • Treo 700WX new digitizer will not power up.

    I recently replaced my old, scratched digitizer with a new one.  After carefully following the directions on replacing the digitizer, the end result was a dark screen.  I tried reinstalling my old digitizer and now it will not power up.  Interestingly, I can still use the phone to call out, however, the key pad will not work to connect to incoming calls.  I hear all the normal sounds but no screen.  Can anyone help me or do I have to shell out $$$$$ to Sprint?
    Post relates to: Treo 700wx (Sprint)

    Try a soft reset - remove the battery and put it back into your device.

  • 700wx battery life

    My treo 700wx seems to have extremely short battery life (i.e., 4 hours without talk time). Is there a software patch or is this a potential service issue?
    Post relates to: Treo 700wx (Sprint)

    My 700wx has just developed this problem too.  It was fine for 4 months, but now, you can practically watch the battery drain, with nothing turned on.  Yesterday, it drained to 11% after only four calls during the day. Also, the charger takes forever - 4 to 5 hours to charge, and it gets very hot.  Also, my Bluetooth suddenly doesn't work any more.  Any ideas???
    Post relates to: Treo 700wx (Sprint)

  • Can't login to AOL - Palm Treo 700wx Verizon

    It used to work fine, however recently it won't.  Using Palm Treo 700wx, Internet Explorer - I go to m.aol.com.  I put my username and password in.  It says 'locating' and then does nothing.  Screen stays the same.  Does anyone have any suggestions on what to try?  Verizon was no help.  It's driving me nuts!  Thanks in advance.
    Post relates to: Treo 700wx (Verizon)

    I would try clearing your cache and cookies in IE from menu, tools, options, select memory tab, delete files, on the security tab , choose to clear cookies. Try again to browes out to you AOL URL. You could also try a restart on the device using the following steps:
    Performing a soft reset
    A soft reset is similar to restarting a
    computer. If your smartphone is not
    responding or you have trouble
    synchronizing with your computer, a soft
    reset may help.
    1
    door release
    slide the battery door downward to
    remove it from your smartphone.
    Use one hand to press the batteryand use the other hand to
    2
    Use the stylus tip to gently press the
    reset
    smartphone.
    button on the back of your
    3
    logo screen to fill before continuing to
    use your smartphone
    Wait for the progress bar on the Treo

  • Treo 700WX DUN: Does NOT work in Leopard! Anyone have luck?

    I have a Treo 700WX with Sprint. I can't connect with Bluetooth or USB. When I used Tiger I was able to make it work just fine.
    Now with Leopard...It does NOT work. The modem disconnects during connection. I just can't get online plain and simple.
    At first I was blaming my Treo. But I tested it out on my Vista Partition and it worked! So the problem lies within Leopard.
    Apple did a lowsy job on the Networking features in Leopard thus far.
    *Has anyone gotten Leopard to use DUN (Dialup Networking) with a cellular Device?*
    Again I'm using a Treo 700 WX (Windows Mobile 5) with the 1.15 software installed. I've also tried to install USB Modem (by Mobile-Stream) which enables USB connectivity. It still does not work. Same errors.
    I was camping in the middle of nowhere for 5 WHOLE DAYS with no Internet!!!!!!! hehe jk I was actually happy about that. Excuse not to work! :P But there may be a day when I need DUN.
    I don't have the "Phone as Modem" through Sprint. However you don't need it on your plan for this phone.

    MikeyPD,
    Sprint DUN is working just dandy for me, but I am using phone-as-modem, and with an A900M, not a Treo. You probably know more about the differences than I, but I would expect they both use the same protocols to connect (on both ends).
    For me, it was a snap to set things up in Leopard. Actually easier than Tiger. Do you use a standard DUN connection, or must you use some other method for the Treo, running Windows Mobile?
    Assuming it is standard DUN, let's go through the steps. First, is there any indication that the Treo is recognizing the connection as a request for DUN service (for example, my A900M clearly states that it is being used as a Data Modem)? Do you have the modem script set to dial #777? OK, here's the "Duh!!!" question: Do you have the modem script set to ignore the dial tone? If you do not have it set to "ignore," it will immediately fail every time.
    Scott

  • How can I use my Treo 700wx thru Verizon to connect my laptop to the internet?

    I've seen many people do this.  Do I need a special cord? How can I make this happen rather quickly?  I'm leaving in a few hours for a road trip and would like to be able to make this happen.  What kind of set up is involved on the phone?  I currently have an unlimited data plan on my account thru Verizon.
    Thanks in advance for any help and advice you can give.
    DT. 
    Post relates to: Treo 700wx (Verizon)

    Hello, I wanted to let you know there is a Support Base Article about this.  You can find it by going to kb.palm.com and searching for article number:  44981.
    This article will tell you everything you need for it and how to do it.
    This article is also specific to Verizion

  • Treo 700wx "Device Malfunctioned/not recognized by windows" error msg!

    Everytime i try to hook up my new treo for syncing via USB  it tells me that the device has malfuntioned or that it is not recognized by windows! i have reinstalled active sync multiple times i have changed settings in my treo and checked that all usb options are checked, ive looked for 0kb files and there are none, please someone help... additional info.. i used to have a motorola Q but i deleted that profile from my active sync still nothing, please help!
    Post relates to: Treo 700wx (Alltel)

    As i said i am new at all of this, when you say "check under device manager and see if the driver has a bang on it it" what do you mean and where can i find this? tried a soft reset still nothing, not ready to do a hard reset because i do not want to lose all of my information i have on the phone currently. Checked that my pc firewall does allow actve sync access
    Post relates to: Treo 700wx (Alltel)
    Message Edited by Jburm on 07-08-2008 08:12 PM
    Message Edited by Jburm on 07-08-2008 08:16 PM

  • How can I change my Analog clock displayed back to a Digital one? (Treo 700wx)

    Apparently on its own my phone has changed the format of its clock on the upper right hand corner of the treo screen. The clock used to read digital time but now it reads a clock with an hour hand and a minute hand. No one (Sprint) knows how to change it back to digital time. Help!
    Post relates to: Treo 700wx (Sprint)
    Message Edited by WyreNut on 04-16-2008 06:16 PM

    Take your stylus and tap and hold on the analog clock and you will get a drop down list with two choices analog or digital. Choose digital.
    Post relates to: Centro (Sprint)

  • Attachments "removed" before email is received Treo 700wx Verizon/Yahoo! mail

    I have a Treo 700wx and use Verizon with Yahoo premium mail service. I can send and receive emails but any attachments on incoming mail is "removed" before I receive it. I actually have a message at the bottom of my email that tells me attachments have been removed! Can anyone tell me how to fix this? Is it an option I need to change on my Treo software or what? I receive the attachments fine on my desktop when logged in to my Yahoo account. And I called Yahoo and they verified that their ssytem is working properly.
    Post relates to: Treo 700wx (Verizon)

    Yes, my email is retreived automatically and wireless without connecting to my desktop.
    Post relates to: Treo 700wx (Verizon)

  • Add "Sent via" Line To Outgoing E-Mail From TREO 700wx

    I have a couple of users who would like to have the "Sent via" line added to e-mail that they send from their TREOs.  This is similar to the line added to an outgoing e-mail message when being sent from a BlackBerry device.  Is this possible?  I've looked everywhere in the phone that I can think of, but have come up empty.  Any information would be greatly appreciated.
    Post relates to: Treo 700wx (Verizon)

    AS you've seen on the Blackberrys  that message "Sent by my Blackberry" is basically a footer or signature on the message. On the 700wx to set this up you need to go to Start>Messaging>Menu button>Tools>Options and it should open to the accounts tab at the botton with a signatures button on the right side. Click on the signatures button and There you select the account and whether you want to use it for replies and forwarding as well.

  • Palm Treo 700wx sync with Palm Desktop

    Newbie here, so please excuse if this is already in here somewhere!  I've been using Palm Desktop (v4.0.1) syncing with a Sony handheld device (Clie).  The Clie died, and I purchased a used Palm Treo 700wx (Sprint) for both cell phone use and as a PDA.  Darn if I can find anywhere how to sync the Palm Desktop with the Treo 700wx.  Am I missing something somewhere?
    Post relates to: Treo 700wx (Sprint)

    Hello melemiller and welcome to the Palm forums.
    The Treo 700wx, running the Windows Mobile operating system, can only sync to Microsoft Outlook.  You will need export the data out of the Sony edition of Palm Desktop and import it into Outlook and then install the Microsoft ActiveSync 4.5 software on your computer to sync the Treo to Outlook.  If you are using Windows Vista, you need to use the Windows Mobile Device Center that is included as part of Vista to sync with Outlook.
    Alan G
    Post relates to: Treo 755p (Sprint)

  • Treo 700wx calendar not synching

    Hi, I am using a Treo 700wx and have been using it to synch with Exchange for a year successfully.  I recently had a problem that resulted in a hard reset of my phone so I had to reset up the Active Synch options.  Everything but my calendar is re-synching successfully but even though the calendar is 'checked' for synching, it is not synching and it appears that NO calendar entries have been set.  Would appreciate any advice!  Thanks.
    Post relates to: Treo 700wx (Sprint)

    Hi.. Welcome to the Palm forums.  It sounds like there is probably a problem with the eas profile on your device.  Go into the profile, start-programs-activesync-menu-options.  Uncheck all boxes, for the exchange profile, then sync.  Once the sync is complete go back into the profile and sync calendar only and test, if successfull then add 1 box at a time sync and test to insure data is moving.  I also assume you are syncing wirelessly not thru the cable.
    Post relates to: Centro (Sprint)

Maybe you are looking for

  • JOB IN BACK GROUND

    I MADE THIS AND IT'S NOT WORK WHY??? I MUST RUN IT ONLY IN BACKGROUD,IF I MADE PROGRAM---->EXECUTE IN BACKGROUD IT'S WORK??? data: name like tbtcjob-jobname. data: number like tbtcjob-jobcount. DATA: PARAMS LIKE PRI_PARAMS, DAYS(1) TYPE N VALUE 2, CO

  • Creating resource renderer - help needed

    Hi, I am trying to create a simple resource renderer. I downloaded the project SimpleResourceRendererWithReadymades from sdn. Can anybody explain what each method in that resource renderer example does?(for ex. renderMetaProperty, render). Is there a

  • Poplulate key figure thru the start routine

    Hi Experts, I have update rules for my cube. In the start routine there, if i wrote abap code would it automatically fill the value of key figures in the cube. Can we do that with the ABAP code ? Or do i have to go to each key figure's routine and th

  • Playing a movie rental

    I rented a movie from iTunes, it downloaded. now how do I get it to play? There is no mention of a movie listed in the right hand column nor is there a "cloud" mentioned anywhere. How do I play trhis movie?

  • Dynamic values using combo box

    Hi, i have a doubt regarding the combo box. do clear it. Company [ ] bu[ ] onselectio of company , i should get bu values.... i am getting the value in the bu list....... but the company name is not getting restored. giude me with the code part... it