Treo 700WX new digitizer will not power up.

I recently replaced my old, scratched digitizer with a new one.  After carefully following the directions on replacing the digitizer, the end result was a dark screen.  I tried reinstalling my old digitizer and now it will not power up.  Interestingly, I can still use the phone to call out, however, the key pad will not work to connect to incoming calls.  I hear all the normal sounds but no screen.  Can anyone help me or do I have to shell out $$$$$ to Sprint?
Post relates to: Treo 700wx (Sprint)

Try a soft reset - remove the battery and put it back into your device.

Similar Messages

  • New iphone4s will not power on

    Just got it shipped to me today took it out of the box and it will not come on, changed it for an hour and it still will not power on?

    I too had a similar problem.  The brick went bad.
    I had to use a Fluke meter to measure the voltage at the tip, as there is no light on the brick, nor is there a functional light on the computer.
    Yes, it is supposed to flash a couple of time if there is juice in the wire, but my issue, was that it supplied power, but failed under computer drain initially, until it gave up.  My screen kept flashing when power was on, and power was off.  Effectively, the screen became my power indicator.
    Having had similar issues in the past with switching supplies that had a thermal breaker built in, I waited hoping it would reset.  BUT, no light on either the brick or the computer, just wasted my time trying to solve the problem the normal way.  If there was a light, you would know immediately.  It finally gave up life, and never revived.  No light on the brick, and NO indicator light on the W540.
    The new brick was made by another vendor, and runs much cooler.  If you want the markings on the broken brick, v.s. the new one, just ask.....
    Not acceptable, but stuck with this.....  At the end of the year, someone at Lenovo will get a raise, based on sales.... 
    My productivity is going down!

  • My brand new iMac will not power up after an update restart, any suggestions?

    Any suggestions on why my IMac will not power up after it done a restart?

    Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
    If that doesn't help:
    See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
    If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
    If you still have problems, give AppleCare a call.

  • MY NEW IPHONE WILL NOT POWER ON

    my iphone 5 will not charge

    I just got my Apple Apple Iphone 5 32gb Verizon, Oct 5th 2012.  I am one the first customer to recieve this phone, from Verizon Wireless.  I have my old Apple iphone 4, I did a Backup of stuff on my Iphone 4,  I tried restore my back up from iphone $, on my new Iphone 5, it finshed!    I looked at Iphone 5, The restore was finshed, all my stuff was transfered, Great!    This phone run faster than my old iphone 4.
    Okay, I called Verizon to activate the , on the Verizon Wireless network.   So, I made call on The Verizon Wireless network, and my phone crashed!!    blanked screen!      MAC OS 6 crashed!   So ! Paniced!   The phone went dead!  Until I reset the phone pressing the power buttun.   I had restore MAC os6 over again.  Right I had take this off the Verizon Network, restore access to my old Apple Iphone 4.       Right now I have restored the MAc os6 back on my Iphone, works, but the can't call anywhere, it is set airplane mode.    Today!  I tried dial 611, this is a Ipod iphone5 32gb for mow.   I need to fix, reporgram? or what?   I need help!!!

  • New W540 will not power on any longer

    Short story:
    W540 config below
    Arrived, bios 2.09, set intel rapid boot off
    worked for 1 week
    Then it refused to power on
    No indicators when battery plugged in and power or battery plugged in and no power.
    with power, and no battery only the power button blinked 2x. No other response.
    Lenovo's action: return and get a new system. After waiting 6 weeks to get it, this is not what I expected froma rather expensive system. I should have heeded the warnings on this list.
    I see on another list tthe E440, ithink, it was a cmos battery issue. Does anyone know what the issue is with the W540?
    Thanks.
    Ordered config
    Base Model
    20BHA0A4CC
    Component
    Description
    Shipping Country
    Canada
    Selectable Warranty
    N03_3YRDEP_CI
    Preload Type
    STANDARD_IMAGE
    Preload OS
    Windows 8.1 64
    System Unit
    W540 NVIDIA Q1
    Processor
    Intel Core i7-4800MQ
    Security Chip 2
    Security Chip Enabled
    Wireless WAN accessories
    MBL BB upgradable, future use
    Display Panel
    W540 15.5 3K IPS WWAN
    Pointing device
    W540 FPR
    WiFi wireless LAN adapters
    Intel 7260 BT ACBGN
    Hard drive
    500GB HDD 7200rpm
    RAID Setting
    Internal RAID - Not Enabled
    Optical device
    Travel Bezel, Fixed
    Battery
    6cell Cylindrical 56.16Wh
    Total memory
    8GB PC3-12800 DDR3L (2 DIMM)
    Camera
    720P_HD_CM
    AC Adapter and Power Cord
    170W AC Adpt2 US (2pin)
    Keyboard Language
    KYB w/NumPad US English
    Publication Language
    Pub; US English
    Preload Language
    W8.1 64 English

    I too had a similar problem.  The brick went bad.
    I had to use a Fluke meter to measure the voltage at the tip, as there is no light on the brick, nor is there a functional light on the computer.
    Yes, it is supposed to flash a couple of time if there is juice in the wire, but my issue, was that it supplied power, but failed under computer drain initially, until it gave up.  My screen kept flashing when power was on, and power was off.  Effectively, the screen became my power indicator.
    Having had similar issues in the past with switching supplies that had a thermal breaker built in, I waited hoping it would reset.  BUT, no light on either the brick or the computer, just wasted my time trying to solve the problem the normal way.  If there was a light, you would know immediately.  It finally gave up life, and never revived.  No light on the brick, and NO indicator light on the W540.
    The new brick was made by another vendor, and runs much cooler.  If you want the markings on the broken brick, v.s. the new one, just ask.....
    Not acceptable, but stuck with this.....  At the end of the year, someone at Lenovo will get a raise, based on sales.... 
    My productivity is going down!

  • New T61 will not power on unless plugged into AC Power

    Hello all,
    I am a new owner of a T61 laptop and so far I love it.  Though, I have found something rather weird.  I cannot power on my laptop with just battery power.  I have to plug it in to power it on.  From that point on, I can run off of battery power.  I have a 9-cell battery.  Once the laptop is powered up, it reads as 100% battery power.  I would really appreciate any ideas or tips that anyone may have.
    Thanks
    Ryan

    Sounds like a bad battery. We received a shipment of 30 T61's in which 17 of them had bad batteries straight out of the box. Exact same symptom as yours. You should contact your Lenovo or the store you bought your laptop from. Last year, Lenovo recalled defective batteries for T60s.

  • Droid Razr will not power on after new update.

    I have the Droid Razr and attempted to download the new update this morning.  My phone has powered down and will not power back on.  I have done the forced re-start several times & nothing.  The phone starts to power-up and turns right back off.  My phone was fully charged before I attempted to install the update.

    Try holding power + vol up and vol down keys simultaneously (all at the same time).  It should bring you to the bootloader menu, use volume down to go to recovery, press volume up to select it.  An android lying on his back will appear, press the volume up and down keys at the same time, hold for about 5 seconds and release.  Scroll down to wipe data factory reset, use the power button to select it, it will go back to the main menu, scroll down to wipe cache, back to main menu and restart device.  If that doesn't work, try Verizon support on the phone and/or bring it in to your local Verizon store.

  • Brand New Iphone 5 will not power on

    Activating my new phone and it will not power on. called the service provider for customer support and they said to charge for a few hours. I can not see where on the phone it indicates its charging as there seems to be nothing lit up. I have never had an Iphone so i'm pretty lost here. My Droid Bionic has a flashing indicator so even when totally dead it will flash when plugged in. Any help would be great!

    Plug the phone back into the wall charger wait 5 minutes and then hit the sleep button on top of the iphone.  IF that doesn't power it up then hold down the sleep/home button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Where exactly did you buy this iphone 5 from?

  • My new ipad just out of the box will not power on. What's the deal?

    I just purchased my new ipad2 a few hours ago. Right out of the box it will not power on. Tried to sync in case that would help but it didn't. I can't imagine what the problem would be. At the Apple store they said it should be charged and ready to go.

    Thanks but it must be defective because that didn't work. Trying to sync it didn't work nor did trying to charge it.  Guess it's another trip to the Applie store tomorrow.

  • New Keyboard Will Not Work for Power On Key Combinations

    I have a early 2006 model iMac with 20" display. I had to purchase a new keyboard and bought one of the new wired tactile Apple keyboards. I've upgraded to Leopard and also have the most current keyboard update to support this keyboard. Tonight I got into a situation where I needed to boot my machine holding down the "Option" key in order to select a startup partition. It did not work. I finally went and got an old keyboard off another Mac, plugged it into my iMac and powered the machine up holding the option key. They screen appeared allowing me to select the partition and I was off and running. What I have noticed is the new keyboard will not allow me to perform any of the startup key combinations like the ones for booting from a CD, or ejecting a disk, etc. Is there some driver or something I'm missing? Dave

    <oops! dumb question -- deleted by Looby>

  • My Powerbook will not power up, but I can hear the fan running...

    Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....

    Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
    This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
    Any answers to this yet? I think I'll call on this and report any success to this discussion.
    15" PowerBook G4   Mac OS X (10.4.8)   1 GB DDR2 SDRAM, 100 GB HD

  • Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

    Hello, I need some help.
    I have a HP DM3-1130us Laptop that will not power on at all.
    the only thing that happens when I plug it in is the power jack lights up.
    When the power button is used absolutely nothing happens.
    No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
    just the light by the power jack that says the cord is plugged in.
    The laptop has Windows 7, 320gb hdd, 4gb ram.
    I have tried new power adapter and still nothing.
    I have taken the battery out and tried and nothing.
    I've tried the option where you take the battery out and hold the power and nothing.
    I have tried with different hard drive and no hard drive and nothing.
    I have tried reseating the ram and tried new ram modules still nothing.
    So I am kind of stumped on what to do, the laptop will just not turn on.
    Its not under warranty anymore so cant send it off.
    It has not been exposed to any elements(extreme heat or water).
    and its never been dropped or anthing.
    Im kind of wondering maybe the power button board its self is bad?
    If feels fine, its not loose or anything but could it
    have just stopped working? for those who are not familiar with this model.
    the power button is on the side and is a kind of drag and release button.
    Its also on the same board with the Wifi button and 2 Usb ports.
    But Im wondering before I buy a new one if this is what it could be.
    Or could the motherboard its self be bad?
    But even if the motherboard is bad would it still power up
    just not post?
    Also does anyone know of any other way to try to power this laptop up
    without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
    If anyone can provide any information I would appreciate it.
    Thank you.

    Hey Tyler,
    Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
    You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
    I hope this helps answers your questions,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Macbook Pro will not power on without battery installed

    Hi there,
    I have a Macbook Pro A1226 that fails to power on without a battery installed.
    i.e. will not run off AC power on its own. I have tried 2 other power adapters, no change. All 3 adapters are outputting the correct voltage without fluctuations.
    But, if I am in OSX with a battery plugged in, shutdown the laptop, remove the battery while AC is still plugged in, it will power back on without any issues. But as soon as I remove the battery, it will not power back on using just AC.
    Is this an I/O board issue, or a mainboard?
    I have power drained the unit and reset the parameter ram.
    Thanks

    Any update on this? This is the same thing that's going on with my laptop right now. I was at the Genius Bar and they said they can send it in for repair. Takes 7-9 days and costs a minimum of $310. At the time I was there, my computer wouldn't start up at all, because the battery had drained to less than 20%. It didn't even start with just the power cord (no battery in). The "genius" finally got it to work by doing a PRAM and SMC reset. Got home and was able to recharge my battery to 100%. Used my computer for 2 days before I dared to take it off the power supply. Lo and behold, as soon as I take it off the power cord, then re-connect it, it shows "Not Charging". I tried to do SMC again, but no luck. Keeps saying "not charging". Even tried with a brand new battery. Do I have to get the I/O board thingy replaced?

  • TS1702 My brand new iphone5 will not connect to my home wifi even though my ipad and old iphone do connect with no problem. What can I do?

    My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?

    Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
    Good luck and do report back.

  • HT1430 my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed A

    my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed APPLE

    im hoping that by holding both the power and circle buttons it will spring back to life ..........somtimes apple you are too clever with your secert hidden butttons switches

Maybe you are looking for