Treo 755 resets when I try to view my call log

Can someone point me in the right direction to correct this problem.  The phone resets whenever I try to view my call log.  I assume the call log is corrupt somehow but I do not know how to correct it. 
Thanks!!!
Post relates to: Treo 755p (Sprint)

i had this same issue. i know hardreset will resolve this one, but after syncing the phone again to the computer and tried viewing the log it will shut off. if this is caused by data corruption, then, just hardreseting the device will not work cos it will still sync the corrupted data to the phone again after the hardreset. someone told me that before syncing the phone after the hardreset i should rename the backup folder on my username. but renaming it will not sync any of my third party applications back and my call logs. my call logs are important to me, so if i can not open it from the phone, is there a way to view it on my computer?..
thanks..
Post relates to: None

Similar Messages

  • Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

    Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

    You said:
    We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
    Just what did yo do to gt iTunes to see the download:

  • Imovie crashes when i try to view the video full screen or export it. How do i fix this?

    iMovie crashes when i try to view the project full screen and export it. How do i fix this?

    Close out of the camera app, double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Then check your camera roll again.

  • Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I have burned pictures to a dvd off of my iMac.  When I try to view them on my macbook I can only look at one picture at a time.  Is there anyway to view as a slideshow?

    I have burned pictures to a dvd off of my iMac.  When I try to view them on my macbook I can only look at one picture at a time.  Is there anyway to view as a slideshow?  Thanks!

    What app do you use to view them?

  • Safari is giving me a missing plug in message when I try to view things like movie trailers. The trailers play on Firefox, so I'm not sure what's missing from Safari.

    Safari is giving me a missing plug in message when I try to view things like movie trailers. The trailers play on Firefox, so I'm not sure what's missing from Safari.  I have Safari 5.0.6 and Mac OS X 10.5.8.

    I just noticed that it won't play some newsite videos anymore either. What plug in do I need to update (if that's the problem)?

  • Firefox closes when I try to view a pdf file

    when I try to view a pdf file a warning comes up and firefox closes

    I am not sure what is happening, but if you are unable to open pdf file whilst they are on your computer, it is unlikely that you will be able to open pdf files that are on the internet.
    I am not sure your problem is with firefox, because it seems you may not be able to open pdf files even with another application such as Adobe Reader.
    The runtime error message is probably generated by your OS Vista, and indicates you have a problem with whatever you are trying to run.
    * see [http://windows.microsoft.com/en-US/windows-vista/What-is-a-runtime-error MS link] '' " What is a runtime error? " ''
    Post back again once you are able to open ordinary pdf files that are on your computer.
    * see also [http://www.adobe.com/uk/products/reader.html Adobe Reader website]

  • When I try to view the IDVD tutorials, I get a message that says: The video cannot be found. It may have been removed from the server.  HTTP 404. What do I do?

    When I try to view the tutorials in IDVD, I get the following message: "The vodeo cannot be found. It may have been removed from server  HTTP 404" What do I do?

    You don't say what version of iDVD you are using, nor what link you were using, but try these:
    A good guide to iDVD 7 can be found here:
    http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
    Apple's tutorial on iDVD 07/08 is here:
    http://manuals.info.apple.com/en/idvd_08_getting_started.pdf

  • I get a blank new window when I try to view a pdf online

    I get a blank window when I try to view a pdf online

    What OS? What Browser What version of Reader?

  • Hallmark Card Studio keeps quitting when I try to view a card Why?

    Why does my Hallmark Card Studio quit when I try to view a card? It had always work well till now.

    If you don't get an answer here, another option is to contact their support: http://www.hallmarksoftware.com/support/support.aspx

  • Getting blank pdf files when I try to view them on computers other than my Mac

    I need some assistance.  I keep getting blank pdf files when I try to view them on anything other than my Mac.  I create them in either Illustrator or InDesign and I make sure that I select High Image Quality.  I can view them just fine in my Acrobat reader, but the minute I send them out to others or view them on a PC with Acrobat Reader 7 i can't view them.  I get this message "There was a problem reading this document (111)"  Does anyone know the solution to this problem?

    Many PC users still use older versions of Acrobat or Acrobat Reader. I know some people that absolutely refuse to update beyond Acrobat Reader 4.5, often times, that can contribute. Also if you've run PDF Optimizer and removed all the fonts. That can cause a problem.
    Also, make sure you save pdf's with the .pdf extension. As much as they say the opposite PC's need to see that extension.

  • Ffox hangs when I try to view source code - any ideas how to stop this?

    Ffox hangs when I try to view source code - any ideas how to stop this?
    hangs forever... have to use control-alt-del to close :-(

    Usually a USB error. Read here:
    http://support.apple.com/kb/ts3694#4000

  • Why is my keynote crashing when i try to view in the light table?

    My Keynote presentation crashes when I try to view it in the light table view, and the whole system has to be restarted. The file is not huge, only 54 slides, mostly graphics and video plus a little bit of text. It is under 1GB in size, which I can usually manage without issue. Has anyone else encountered this problem? Does anyone know of a solution or a workaround? I'd be so grateful for any help. Thanks!

    Try this maintenance routine which has solved quite a few issues:
    1
    Close all applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    go to;   Applications > Utilities > Disc Utility > First Aid > Repair Disc Permissions
    when this is completed restart the Mac normally
    6
    Reinstall Keynote using the original discs or logging into the Mac App Store and installing from there.
    Post back to let others know if this helped

  • Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

    I cannot open a new window for FireFox.
    Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
    The Downloads Window cannot be accessed either.
    This is very annoying. Is this a bug? Or is there a fix.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I have imported iphoto library all the ways you recommended and when I try to view it, it only allow

    I have imported iphoto library into photoshop elements 11 organizer all the ways you recommended and when I try to view it, it only allows me to view one photo at a time. What can I do?

    At the bottom right of the window, move the zoom slider to the left:

Maybe you are looking for

  • Problem with Accessing Deployed Servlets Please help, very urgent.

    Inspite of going through lots of Docs. I am not able to access the JSP which is deployed using JDeveloper 3.2 in the browser? What should be the URL and where should I place the JSP and the related files in the Apache Server (Specific directory)? Ple

  • 0CALQUARTER 0FISCPER

    Hello, I use a infoprovider with cumulative key figures. Unfortunately calendar year and fiscal year are different. SAP only offers 0CALQUARTER, but I need the quarter of the fiscal year. Just modifying the value of 0CALQUARTER does not help, because

  • Interactive Report Charts

    When a user creates a chart in an interactive report, is it possible to set it so that clicking on a bar/pie wedge/value would take them to a report view filtered down to the records in that set? An example: we have an IR, and built a pie chart of us

  • Need C# sample for Add-On

    Can anyone share a simple add-on solution with me that is written in Visual Studio 2005 and C#?  Even if it's just a simple "Hello, World" one.  But it must have been installed and connected to by you and validated that it works.  I don't want a link

  • 'PYXX_READ_PAYROLL_RESULT'

    hi all,            May i know 'PYXX_READ_PAYROLL_RESULT'  this fm is used for what ?  what things are commented and what not. what should be taken for cluster id and sequence number. thanks.