Treo 800w and Terminal Services

In the User guide available online for the 800w, it says that it includes software for Terminal services, aka Remote Desktop. I cannot find this software anywhere on the phone or on the included CD.
Post relates to: Treo 800w (Sprint)
This question was solved.
View Solution.

I found the problem. I had the program installed on the storage card and the program does not support that. Here is a link to the program in case people in the future need it.
http://pdaphonehome.com/forums/attachments/ppc-6700-xv6700/10303d1171200207-wm6_rdp-mobile-remote-de...
Post relates to: Treo 800w (Sprint)

Similar Messages

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

Crystal Report and Terminal Service 2008 (registry trouble ?)

Hi to everyone,
I develop an account software that use Crystal Report to obtain reporting capabilities. My software supports three runtimes of Crystal Reports: release 8, release 9 and release XI.
The user can configure the application and choose which to use.
Some installations (of our customers) use Terminal Server features: the application is installed on the host pc (usually Windows Server 2003), and the clients (running XP) connect to the host and use the software via Terminal Service, and all works fine.
Recently one customer of ours has set up a Windows Server 2008, and troubles began ! ... the Crystal Reports runtime failed to function. Let me try to explain the scenarioes:
- Host PC with Terminal Service 2008
- User A on a PC with Windows XP
- User B on a PC with Windows XP
scenario 1, my application uses Cristal Report Runtimes XI
User A and B can correctly install the runtimes.
Both of the user cannot print reports due to a failure instantiatìing the COM components of Crystal Report.
scenario 2, my application uses Cristal Report Runtimes 9 ... the most funny
User A connect to the host, install the runtimes and start to use the application. All works fine.
User B connect to the host, install the runtimes and start to use the application. User B can use the application (and print reports) but suddenly the User A failed to print (failure instantiatìing the COM components of Crystal Report).
Well ... User A reinstall Crystal Reports library and newly register COM components, and the application newly works fine (and print reports correctly) ... but User B suddenly stop printing reports (the same error).
User B reinstall Crystal Reports library and newly register COM components, and the application newly works fine (and print reports correctly) ... but User A suddenly stop printing reports (the same error) ... and so on.
scenario 3, my application uses Cristal Report Runtimes 8
User A and User B can correctly install the runtimes and the software works fine !
Very funny beacuse ver. 8 of Crystal Reports Runtime are quite old, but they works properly instead of rel. XI (more recent) that doesn't work at all !
Crystal Report runtimes use heavily Windows Registry, and setting up those runtimes require a lot of registry update (due to COM interfaces); maybe there is some registry issue/trouble that scramble Crystal Report runtimes configuration ... the scenario 2 is quite bizarre and counfuse me !
Shall I need to configure some setting on Terminal Service 2008 ?
any idea ? thank you very much.
Paolo
Edited by: Porlock on Sep 8, 2009 4:53 PM
Edited by: Porlock on Sep 8, 2009 5:03 PM

Posted in wrong forum and so old now to late to update it.

P1566 and Terminal Services.

I have a 64 bit 2008 server running terminal services,
A client with windows xp 32 bit and HP LaserJet P1566 printer attached to it.
When connecting via RDP to the server the printer is mapped though to TS and appears on the printer list. How ever when printing it comes up saying that it is not possible to print.( this message is on the server)
The server is using the Terminal Server Easy Print driver.
As far as I am aware Microsoft recommend not using host based printers and HP say that it is compatible (but is this directly connected to server or passed through the RDP client?)
has anyone manged to connect on of these printers, or are host based printers just NO GO areas when connecting though an RDP client?
Other PCL5e based printers recieve the print jobs in the Local Queue (Client) from the Terminal Services Clients
Many Thanks for you help.
Malcolm.

We have now investigated further and it looks like we have found a solution.
If the following group policy key is set to enabled/disabled the system configured to use the terminal server easy print.
computer policy/administrative templates/windows components/terminal services/printer redirection/Remote Desktop Easy Print Driver First
By changing the key to "not configured" the printer then listed the P1566 driver instead of the Easy Print Driver.
If this key was set to Disabled one would have expected it to try the correct driver before easy print, but this was not the case.
Hope this helps a few others of you with a similar problem.
Malcolm

Installation issues with JRE, Auto Update, win 2008 and terminal services

Hello,
We have seven Windows 2008 servers running Terminal Services in one TS farm. I have approximately 600 users accessing these servers. We have a need for the Java JRE. The JRE is to be installed on each of the seven servers since the user has no input into which server they log on to (round robin / load balancing)
There are several issues that have occurred with this installation. I install the JRE on each of the servers when there is no one logged on. I turn off both of the update features while installing as administrator. When the users log on, however they are at some point prompted for an admin password to update Java. The users have no need to update java as all updates will be performed by the system admin. Additionally, when the user runs any app that uses the Java plug-in, they get a folder put on their desktop labeled Sun.
Are there special instructions for installing Java when using Terminal Services and Windows 2008? As you can well see, 600 calls to the help desk asking about this update popup is not productive and accessing 600 users accounts and turning off the auto update on an individual basis is not practical. The user cannot disable this update anyway. They options are grayed out at the user level.
If this is not the proper forum to ask these question, please forward this message to the proper department or let me know who I should/could contact to resolve these issues.
Best regards,
Bob

thomashmaine wrote:
I mean to only explain 1 enviornment. We have a windows 2008 terminal server. It has JRE 1.6.0_07 (32bit) install on it. The users use this server for Office Apps and to Access our software which is web based and requires a JRE to be able to work.
When the users login the terminal server picks up there local timezone from the machine they are logging in from and apply's it to there terminal server session. The problem is when the jre is launched it is picking up the server timezone, not the timezone from the users session(which is different).
Does this clarify it?Nope.
Either the user is running the jre or the server is. Or maybe both. Seems like all of those are possible from your explanation.
It doesn't matter what the jre is running. What matters is who runs the jre.
Best I can suppose your situation is as follows.
- The server, not a user, is running a jre with one or more applications.
- The users use something, probably a browser, to access that server app (it doesn't even matter that it is java in terms of what the users are doing.)
If and only if that is your situation then you MUST pass information from the browser session to the server (java or anything else for that matter) and you MUST use that information in the server code to display time information.

WEBVPN and Terminal Services Web Connection

Does ASA WEBVPN support MS Terminal Services Web Connection?? I can reach the first login page but can not go further. I click the "connect" button no any response?!! All other web service running well through webvpn, only MS Terminal Services Web Connection.
I noticed when I use my local PC to connect web ternimal server, it first use port 80 and then use port 3389. I tried portforwading
port-forward TSSERVER www 10.1.1.1 3389
port-forward TSSERVER 3389 10.1.1.1 3389
still not works, please advise.
my ASA version:
Cisco Adaptive Security Appliance Software Version 7.2(1)
Device Manager Version 5.2(1)
Thanks.

This is the kind of thing that you need a sniffer trace on both sides of the CSS to determine what the problem is.

HTTP and terminal services connection intermittently for CSS 11506

I am configuring a client/server CSS configuration. I am facing an intermittent of http connection. The browser will require to refresh 3 times before the web page is seen. I am also facing the connection to the real server behind the CSS using the terminal services in Windows server 2003. I am using ML330 to connect to the real server through their VIP address. The connection is sometime successful but most of the time is not. I had attach the network diagram and the config for reference. Please advice!

This is the kind of thing that you need a sniffer trace on both sides of the CSS to determine what the problem is.

Treo 800W and Backlight Settings Reset

Hi all, does anyone have this issue that when you sync your phone to your computer the settings for backlight gets reset every time.
For example I have checked on external power "turn off backlight if device is not used for 1 min", once I sync my phone, then it unchecks this setting. Is there a fix for this?
Thanks
Post relates to: Treo 800w (Sprint)
Post relates to: Treo 800w (Sprint)

Confirm you are doing the hard reset correctly. http://Kb.palm.com and enter article number 41108
If the problem continues then it will need to be repaired or replaced.
Post relates to: None
Message Edited by legendeld on 02-24-2009 10:11 AM

CR XI and Terminal Services

Post Author: hulbs9nw
CA Forum: Upgrading and Licensing
Hi, I hope someone can help me. I have a copy of Crystal Reports XI Professional English - Full Product. I wish to install this on a terminal server whereby only one user will use it (other users will have shortcuts to CR XI removed). Is this possible with the version of the product that I have?
Thanks in advance

First thing to realize is that CR XI (v. 11.0 - just so we are not confusing with CR 2011 v. 14.0) is not supported on Win 2008. Having said that, I have done a successful instal of CR XI on WIN 2008 just yesterday. In my experience, this may work - or not. Who knows why...
What is the error yo are getting?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

CSA 6.0 and terminal services

Installed csa 6.0 MC on a server . when i try to rdp into it it errors out. in the install guide it says you have edit the mc policy but it does not say what or how
thanks for any help

Simon,
If you put a group or rule module in Audit mode, any corresponding rule will not do any blocking. It will fire alerts exactly as they would have happened if not in autdit mode. In the alerts however you would typically see "This operation would have been denied". It let's you test rules before blocking activites. It is also useful if you are only using CSA as more of a "detection" agent rather than a "prevention" agent.
You can put machine in audit mode in 2 places. 1) you can go into the properties of the group the machine is in, expand the "Rule Overides" section and check the box "Audit Mode". **This will put every policy (ergo rule module) in audit mode.
2) you can go into configuration->rule modules. Select the specific rule module you would like in audit mode. Again, expand the "Rule Overides" section and check the box "Audit Mode".

ADS+Terminal Services on a Single Physical Server running Windows Server 2008 R2

We have a Dual Processor Server (2 x Intel Xeon E5-2620v2 + 32GB RAM) running on Windows Server 2008 R2. This has ADS configured. We now wish to add a VDI Setup with NComputing Zero-Clients. We have to run Terminal Services with User RDS CAL + User
CAL for all VDI Clients.
Please confirm if we can have both the ADS & Terminal Services running on the same physical server ? Are there known issues or crashes due to this ? Or should both these run on two different servers ? Customer does not want to invest in one more server
& OS. Hence, we have to run both the services on a single physical server. Customer has just upgraded his server to a Dual Processor with 32GB RAM to accommodate both the services.
Please advice, if we can run both the ADS & TS on the same server. What is the best practice for this Solution ?
Thanks & Regards,
VR
([email protected])

Hi,
After referring your comment I can say that, you can able to use ADS and Terminal service on same physical server with server 2008 R2. But installing a terminal server on an Active Directory domain controller is not recommended. I suggest that it’s not a good
practice to manage the environment in that way. If possible, then try to run on two different machines for better result and to avoid any problem. Allowing users to run programs on a domain controller could create security risks and performance issues.
If the Terminal Server role service is installed on a domain controller, the security settings of the domain controller will need to be adjusted to allow user’s remote access to the server. This remote access is controlled by the "Allow log on through Terminal
Services" user rights assignment, which can be configured by using the Group Policy Management Console (GPMC).
You can refer below link for more information.
1. Installing RD Session Host on a Domain Controller
2. Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
Hope it helps!
Regards.

Palm Treo 800W -- Ringtones too quiet! It's never as loud as the preview when selecting the ringtone...?

I have a Palm Treo 800W and I am required to keep it on vibrate the whole time because the sound of the vibrate is louder then the actual ringtone, even when I have the devices volume turned up to the max. When I go in to select a ringtone and preview it, it's very loud. Loud enough to be functional, but yet when I receive a phone call I can't hear my phone ringing since the ring tone is so quite.
I tried a soft reset because I thought that might be the problem but that still didn't fix the problem. Every other tone works fine, such as text message notification, or email notification, etc... but the ringtone for 'known' and 'unknown caller' is just too quite to be functional. Does anyone know how to fix this problem?
Thank you
Heisman269
Post relates to: Treo 800w (Sprint)

Don't know if comfortable with editing your registry... I found a RegEdit out there to modify your ring vol that works really well. A word of warning, if you are going to attempt: A>don't modify registry unless you are willing to live with consequences B>use 3 as your vol setting if you don't want to wear out your speaker or hear distorted sound.
http://discussion.treocentral.com/showthread.php?p=1475293#post1475293
Post relates to: Treo 800w (Sprint)
Post relates to: Treo 800w (Sprint)

ZEN 3 + Terminal Services

Hi all,
I'm using ZEN 3.0 and Terminal Services (Windows Server 2003), and I have
some problems.
When an windows administrator logs on, the NAL can be lauched, but this not
works for common users.
Another issue is the fact of the restrictive policies does not apply the
settings to the users. Only settings like the folder redirection works...
Someone knows how I can solve this problem?
Thanks,
Pioker

> I'm using ZEN 3.0 and Terminal Services (Windows Server 2003), and I have
> some problems.
Only ZEN 6.5 is supported with Windows Server 2003.
Sorry.
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp

2004 BMW Contact List and Treo 800w

The Treo 800W is listed on the BMW site as bluetooth compatible. I have a 2004 BMW 525i with appropriate bluetooth hardware. It sync's and works just fine. The only issue is that the address book does not load in it's entirety. It loads A-G and V only. BMW service tried my phone in another car and it did the same thing. So it appears to be a palm issue and not a BMW issue. They tried other phones in my car and they loaded just fine. When i got home from the service center I decided to try my wifes phone which is also the 800W with the exact same build number. Here phone had the same problem but would only load A-C and V. I don't see any similarities in the phone numbers that do load and those that don't. Any ideas why the 800W on two phones with the same Build have the same problems but slightly different outcomes (A-G on mine vs A-C on hers)?
Windows Mobile 6.1
CD OS 5.2.19216 (build 19216.1.0.5)
Software version: TREO800s-1.03-SPNT
Harbware version: A
Firmware Version: 116
Post relates to: Treo 800w (Sprint)

I can't help, but here is a related thread: treo 800w (2007 x5).

Palm Treo 800w Error Synchronizing Work Email and ActiveSync screen problems

For some reason, yesterday my email stopped synchronizing. Anytime I hit the "send/receive", it looks like it's going through the process but I get an "error synchronizing" error. Normally it is on auto synch. My other email accounts work just fine. When I go into the "ActiveSync" through programs to delete the acct and start over, the activesych screen just disappears within a second of me opening it. I can't keep it open for me to make any edits or see if I can get a specific error message. Any thoughts? Not sure if Sprint can solve this or if I would have to go through Palm to troubleshoot??
Post relates to: Treo 800w (Sprint)

If you need help, you can always go to a corporate Sprint service store. To find one near you, go to http://storelocator.sprint.com/StoreLocator/Searchform.aspx. Enter your zip code in the box and choose the radio button that says "Repair centers near me".
However, they are most likely going to just do what you can on your own to start with and that is a hard reset. A hard reset erases all data on the phone and returns it to the default factory settings. Backup any data that you need to keep and then go to http://kb.palm.com/SRVS/NUA/launchKB.asp?c=41108 for instructions on how to hard reset. Once you have reset your device, you will then need to reinstall any software that you added, restore your backed up data, etc. You might find the following link helpful when setting up your device again: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=40086.
Also, make sure to install the available patches on your device: http://kb.palm.com/SRVS/NUA/launchTab.asp?t=downloads&fn=treo&mn=800w&cn=sprint.
Message Edited by wwejason on 04-09-2009 05:52 PM

Treo 800w and Terminal Services

Similar Messages

Maybe you are looking for