Treo 800wx and Motorola S9

Has anyone had any issues with the Motorola S9 headphones?
I have no trouble getting music (sounds great by the way, occasionally cuts out, but that's bluetooth, not the headphones) but I cannot speak through them. I can change to a phone call if I get one, but the other end of the line cannot hear anything. Any suggestions, or has anyone gotten theirs to work?
Thanks!
Post relates to: Treo 800w (Sprint)

THis is all the time. I can make a call by using the phone, and can hear the other line, but they cannot hear me. I can hear music fine, and switch to an incoming call, but they can't hear what I am saying. I have tried incoming and outgoing, no joy.
Thanks
Post relates to: Treo 800w (Sprint)

Similar Messages

How do i restore synching between Treo 650 and iCal & Address Book

prior to installing 10.4.7, i was able to sync my treo 650 with iCal and Address Book; iCal and Address Book syncs with .Mac and Entourage; Entourage syncs with Outlook on my office pc; and Outlook syncs with my Blackberry 8700. therefore, all i needed to do was enter an appointment or a contact in one device, and all the three other devices would be in sync.
i recently upgraded to 10.4.7 and now, i have problems synching: (1) iCal and Address Book can no longer sync with my treo 650, and (2) iCal and Address Book can't sync with Entourage either.
after installing 10.4.7, i noticed that my treo 650 cant sync with iCal and Address Book. i always get the error "isync conduit synchronization failed. ( the first time it happened, i checked isync, and i noticed that "enable palm os synching" was unchecked, so i enabled palm os synching. after that, i was able to sync my palm, but for one time only. after that, i couldnt sync anymore.)
at the same time, i noticed that iCal and Address Book wouldnt sync with Entourage anymore.
i also noticed that iCal starts-up even if i dont activate it. when iCal starts-up, the beach ball spins for around two minutes before it responds; if i click an entry to edit it, the beach ball would likewise spin for a minute or two before i can edit it. i went through all the entries and noticed that some have multiple alarm entries: i deleted these and iCal no longer slows down.
however, whenever i launch Entourage or iSync, iCal also launches. unfortunately, no synchronization takes place.
can somebody help? how do i restore synching between my treo 650 and iCal & Address Book? how do i restore synching with Entourage? thanks.

Bon asis,
I have the exact same situation. Sorry this doesn't help, but wanted you to know that someone else is in the same exact boat.
Jim

Treo 700P and WiFi?

I'm interested in getting a Treo 700P and from what I've read it seems like it'll do everything I need it to, especially when using The Missing Sync by Mark/Space.
My only problem is I want to be able to connect to the Internet and check my email using a traditional wireless network found at most "technology savvy" hotels.
I know I can sign up for this capability for an extra $40/month, but quite frankly I'm not willing to pay that for the little amount of time I'll use this feature. That said, what solutions are available to me? Does Palm make a seperate WiFi card for the 700P? Should I be looking at something else?

The 700p will definitely do everything you want, but offer WiFi connectivity. The EvDO data connection is no where near as fast, though much faster than second generation technologies. Fourth generation network technologies are beginning to appear already to replace EvDO, and WiMAX will be available widely for client use is less than twelve months. WiMAX is real broadband speed using extended ethernet technology, though it will not be initially deployed as widely as cellular technologies like EvDO.
What you want to do at the moment just cannot be accomplished with a Palm smartphone other than the Palm 700w or 700wx. It's too bad, because Entourage is not the only issue - you should take a look at the Windows Mobile Explorer browser before ever seriously considering the use of such a device. And Windows Mobile defeats AvantGo synchronization, internet sharing and synchronization via WiFi as a security measure, and even the Missing Sync for Windows Mobile cannot override this inherent limitation.

Sprint Treo 650 and .mac mail together as one?

I own a treo 650 and use Sprint as a cell provider. I have a .mac account that I use for email. I am not recieving my email on my treo 650 unless I manually click on my VersaMail button. My emails will then download but I am unable to respond to any of them or send an email via my 650. Here is my Account Setup:
Account Name: my name
mail Service: Apple.Mac
Protocol: POP
NEXT
Username: my .mac email account
Password: my .mac email account password
NEXT
email address: my .mac email account
Incoming Mail Server: mail.mac.com
outgoing Mail Server: smtp.mac.com
NEXT
ADVANCED:
Incoming Server Settings:
Port Number: 110
unmarked: use secure connection (SSL)
unmarked: use authentication (APOP)
Outgoing Server Settings:
Port Number: 587
unmarked: use secure connection (SSL)
unmarked: use authentication (ESMTP)
Anyone else have a SPRINT account that will work with their .mac account?

Hi I am also super frustrated with this on my phone. Mac user, Sprint and I can get mail but cannot send. Have any of you found a solution?
Thanks so much!

WLC 5508 and Motorola Symbol Handheld issue

Hi everyone, i have a weird problem and i hope you can help me guys!!
I have just migrate a Symbol-based autonomous wireless network to a Cisco Controller-based environment and everything apparently was working fine. However a few weeks later the installation was over, my customer reported they can't access to a server's shared folder.
This WLAN environment is installed in a warehouse and it is meant to support two different types of users: Regular Lap Top users and Motorola-Symbol Handhels. There are two SSIDs with static security methods (one with WPA+PSK and the other with static WEP key), Handhelds are joined to the SSID with static WEP key. So, here's the deal, this handhelds can join the network without any connectivity issues, roaming, signal strenght, etc. They can also ping everywhere. The problem is that when they need to access a server's shared folder and download files, handhelds displays a bad network path error message. If you do the same with a lap top, you can access the server´s folder with no problems. The handheld model is a Motorola-Symbol 9090 with Windows CE operating system version 5.0. Cisco infraestructure is as follows: WLC5508 running OS version 7.0.116.0 and AIR-LAP1142N-N-K9 series Access Points. In adition, i made a lab back in the office, and reproduce the problem. I tested with an autonomous AP same model and I can actually access a server's folder with no issue but int the very moment i test with a controller-based network i get the same result. I have made several changes in both, handheld and controller, based on a Cisco document for Motorola-Symbol and Cisco best practices. I also have placed a sniffer on my network but I can´t see any traffic when joined throught controller's WLAN. I placed it in the link between WLC and switch and between the switch and the Cisco AP.
Thank you all in advance
Rogelio

Mario:
I am glad that it worked.
well, enabling boradcast/multicast is not recommended if it is not bieng used. It saves bandwidth if it is disabled. However, if it is needed you can enabled it.
BTW, what I know with old versions (before 7.0.116.0) that enabling broadcast only does not work unless you enable multicast as well.
enabling multicast:
# config network multicast global enable.
I worked with one customer before where enabling the broadcast does not work until multicast is also enabled. Do you have the multicast config globally enabled already?

Ical stopped syncing to treo 650 and other quirks

I have been using ical with the palm software on my treo 650, but now updates to my calendar aren't syncing.
I don't know of any changes that I've made, and I think I have checked all of the settings.
I don't know if this is related, but a couple of weeks ago my ipod suddenly said "not configured to this computer" or something like that, so I had to delete my entire library of music and re-import it.
Also, the settings for Safari had to be reconfigured.
Hmmm....does anybody have any ideas why these programs are acting like that?

Welcome to Apple Discussions.
There have been widespread, unexplained issues involving iSync and Palm devices, many of them involving an inability to synchronize at all with iCal. I've seen no specific solution for such problems.
While I never experienced a complete failure of calendar information to pass in one direction or the other, I did have a number of easily demonstrated, repeatable errors crop up with my Treo 600 and iSync under Mac OS X 10.4 and iSync 2, which had never occured under prior releases. For example, the Unfiled calendar would periodically pop up, even though I had selected another calendar - Palm devices - into which Palm-created calendar entries were to be transfered. And, I was never able to synchronize more than three of what were then twenty-seven automatically created birthdays, in the Address Book generated Birthdays calendar. And there were a host of other issues, including the home vs work address label problem, the inability to synchronize more than one address, data duplication within records and occasional record duplication, and other annoying shortcomings.
I simply got fed up, and updated to The Missing Sync for Palm OS version 5. What a difference! All of the quirky iSync behaviors are now a thing of the past. While it seems ridiculous that you would have to install an additional third-party application to synchronize correctly, my experience with iSync - particularly since the release of iSync 2 and Mac OS X 10.4 about six months ago - tells me that it is.
If you are interested in exploring this comprehensive, long-term solution, you can find more information about that application here:
http://www.markspace.com/missingsync_palmos.php

Treo 755 and Gmail app not compatible?

I have the Treo 755 and it doesn't support the Gmail mail app. I have downloaded the IBM Websphere Java product but it doesn't allow it to working with an error message the application midlet not avialable. Anyone have a workaround or a solution?
Thanks - Julie
Post relates to: Treo 755p (Sprint)

DOES ANYBODY KNOW HOW TO "REBOOT" THE TREO 755P? I TRIED HOLDING THE POWER BUTTON, ONLY TO HAVE THE PHONE PORTION TURN ON AND OFF, BUT NOT THE DEVICE ITSELF REBOOT. HELP!!!!!!! THANKS. And on another (sort of related note) since my REASON for wanting to reboot was because I was trying to follow Google's instructions... Although I haven't figured out how to get this to work, I found the following from Google:
How should I use POP on mobile or multiple devices?
If you're accessing your Gmail using POP from multiple clients, Gmail's recent mode makes sure that all messages are made available to each client, rather than only to the first client to access new mail.
Recent mode fetches the last 30 days of mail, regardless of whether it's been sent to another POP client already.
If you sign in to Gmail using your Blackberry, you're signed in to recent mode automatically. For all other POP clients, replace '[email protected]' in your POP client settings with 'recent:[email protected]'.
http://mail.google.com/support/bin/answer.py?answer=47948&topic=1555
Can I use the Gmail application on my Treo?
We don't officially support the Gmail application for Palm Treo devices at this time.
You're welcome to try it out at your own discretion. Your Treo will need a Java Virtual Machine installed - most new Treos come with this pre-installed, and show an IBM Java icon on the main menu.
If you can't find the IBM Java selection, you may be able to install the JVM from the Productivity & Entertainment Software section of your Treo installation CD. Otherwise, please visit http://www.palm.com/us/support/jvm/
Once you've installed the JVM:
1. Reboot your Treo.
2. Download the Gmail for mobile application by pointing your browser (not the JVM) to http://gmail.com/app
3. When prompted, choose Save (as opposed to Open).
Once you've downloaded the application, you'll see a Gmail icon in your main menu. You can also launch the application from the main menu's IBM Java icon.
In order for the Gmail for mobile application to properly function on your Treo, the IBM JVM requires several configurations. Visit Preferences > IBM Java VM, and review these configuration settings on your Treo:
* Check Use Double Buffering.
* Check Use high resolution coordinates.
* Don't set anything for HTTP Proxy.
* Set Memory maximum to at least 4Mb.
* Set Maximum java thread stack size to 4kb.
The Gmail for mobile application has additional configurations through the JVM. From IBM Java VM:
* Select Gmail -1.0.0. > Menu > Permissions.
* Select HTTPS, and make sure to select Once when the application runs (session).
* Select HTTP, and make sure to select Once when the application runs (session).
updated 6/6/2007
http://mail.google.com/support/bin/answer.py?answer=52864&topic=10070
Here is another link:
http://www.palm.com/us/support/jvm/download.html

I install MIDlet on Nokia and Motorola Mobiles But....

I install MIDlet on Nokia and Motorola Mobiles But on Nokia it shows all directories/files but on Motorola MIDlet even not started.
My Application is for File Uploder and Downloader from web server.
Help Urgently.

hi
r u checking ur code on emulator of motorola , if yes check on device bec. motorala emulators doesnt have connection rights.
regards
akash
Indiagames Ltd
India
[email protected]

Bluetooth - MacBook Pro and Motorola w376g

I AM DIRECTLY RE-POSTING THIS FROM ANOTHER USER...i saw no answers there but i am having the EXACT SAME PROBLEM and REALLY want some help!
To everyone who are familiar with Motorola, I am having problems trying to connect with my cell phone via Bluetooth when I am attempting to sync files. When I set up the connection with my Macbook, the setup was successful when paired with each other. (Macbook and Motorola w376g) But when I use my phone and the Macbook, I couldn't connect with my cell phone with the Macbook because according with the Macbook, my phone "does not have the necessary services." Any ideas?
(Also, this isn't really to do with mac, but does anyone know how i can get realtones on my motorola w376g other than using the few that are at tracfone.com? I don't care if they are free or not, i just don't want to be stuck with poly tones on a phone that can play realtones)

Have you turned on *Bluetooth Sharing* in the Sharing system preferences pane?
If you have, what Services does your phone report as having in the Bluetooth system preferences pane? For file transfers it needs *OBEX File Transfer* and *OBEX Object Push*

ISync and Motorola Razr2 V9 problem

Hi all,
I know there was a similar thread, but it's been archived so I can't post there. I just got a Motorola Razr2 V9x and tried to sync it with my Mac. I know I need a plugin for this. I have the plugin and iSync recognizes the phone. Whenever I try to sync I get an error message:
Connection to the phone failed.
Please make sure that your phone is turned on. If this error occurs again, please restart your phone.
The phone is on of course and restarting it doesn't help. When I try syncing iSync starts the process and the Bluetooth indicator light on the phone blinks briefly, then I get the error message. Any ideas what's wrong?

I just replaced my v400 after several years, a long service life for a cell phone.
Anyway, I never had a problem with iSync, except that at first I didn't "point" it to the Address Book directory I wanted to sync with. Are you sure the new entries are in the directory (or group) that you're syncing with? Click on the v400 icon in the iSync window and double check the Contacts drop down box.

ISync and Motorola RAZR

I have one of the original RAZR's and a MacBook Pro running 10.4.11. I've been using Motorola Phone Tools on a PC and syncing with Outlook without issue. When I bought my Mac, I wanted to sync with it instead. Tried exporting contacts from Outlook and importing in Address Book. No dice. Created entries from scratch. I deleted all contacts off my phone and used iSync. Many entries not copied to phone, and MANY entries in Address Book lose their numbers and addresses. I re-sync with Phone Tools to get original contacts back on my phone, and then match up entries from Address Book and phone manually. Did this:
http://discussions.apple.com/thread.jspa?threadID=1320120&tstart=0 <http://discussions.apple.com/thread.jspa?threadID=1320120&tstart=0>
Then run iSync again, and I get duplicate entries on both the phone and in Address Book. For a company that wants people to switch from PC's to Macs, this doesn't work very well.

The Verizon Wireless-supplied Motorola RAZR V3c is explicitly supported only by the latest release of iSync—version 2.2—which is a part of the Mac OS X 10.4.6 update. Prior to this release it was not, but could be used with the addition of third-party plug-ins.
However, there are three significant limitations inherent in this handset:
1. Calendar synchronization is not supported. This is a Verizon issue and may be resolved in future firmware updates from Verizon.
2. Verizon has reverted to its long-standing practice of disabling the Bluetooth OBEX profile, so that files cannot be exchanged between your handset and your Macintosh. They do this to preserve their ongoing revenue stream from pay-to-transfer options like Get it Now. Initially, this handset inexplicably did not have the OBEX profile disabled, but that 'oversight' has been 'corrected' in subsequent releases.
3. The V3c is a V CAST device, and as such, cannot be used as a CDMA wireless modem to connect to the internet. Many Verizon-supplied mobile handsets and smartphones do include a DUN [Dial Up Networking] profile, but V CAST devices do not. I mention this because the lack of DUN support may be a 'deal breaker' for Verizon subscribers like you.

Isync and Motorola V3c

I'm trying to sync my motorola V3c with isync, via USB, and after isync say's "Connecting", the phone says "Syncronizing, but after a while I always get this message:
[RAZR V3c] Connection to the phone failed. Please make sure that your phone is turned on. If this error occurs again, please restart your phone. Device "RAZR V3c" synchronization failed
I restarted the phone, I reset the sync history, What is wrong?
Midilab

I'm trying to sync my motorola V3c with isync, via
USB, and after isync say's "Connecting", the phone
says "Syncronizing, but after a while I always get
this message:
[RAZR V3c] Connection to the phone failed. Please
make sure that your phone is turned on. If this error
occurs again, please restart your phone. Device "RAZR
V3c" synchronization failed
I restarted the phone, I reset the sync history, What
is wrong?
Midilab
Midilab,
Read through this post,
http://discussions.apple.com/thread.jspa?threadID=598486
especially the last few exchanges and see if you find a solution. Resetting the iSync prefs AND deleting the noted directory files MAY be the answer.
I hope this works.
Pete

Isync and Motorola L2

I have paired my Motorola L2 phone with my MacBook (unibody) and isync will not add contacts from my phone address book to the MacBook address book, however my contacts in my address will appear in my phone address book. The Apple web site says the L2 is supported. I have seen discussions where someone had the opposite problem, but mine is the opposite. Any suggestions? Thanks.

I have paired my Motorola L2 phone with my MacBook (unibody) and isync will not add contacts from my phone address book to the MacBook address book, however my contacts in my address will appear in my phone address book. The Apple web site says the L2 is supported. I have seen discussions where someone had the opposite problem, but mine is the opposite. Any suggestions? Thanks.

Remote and Motorola DVR Problems

I was connected to fios internet and tv on March 5, I have called tech support at least 8 times about the remote not working . I have had 3 boxes and 2 remotes sent to me and I still have the problem . I have a Sony Bravia LCD 40" TV
The first box was a Motorola QIP 72161 that came with the installation (remote worked intermittent)
I was sent a new remote same results
Sent a new box the old style 64xxxx remote worked but the hard drive was bad
New box Motorola QIP 72161 same problem
Tech support advised me I did not set up the remote codes properly (had same results it would work for a while then stop)
Tech support hung up on me
Tech support had me lower the picture settings advised me the picture was too bright and it interfered with the remote. She was very polite and helpful saying that this is a known issue and the problem is in the new Motorola boxes Sony, Samsung Sharp all are having this problem (worked all day but not at night)
Tech support told me I had to move the box from out from under the TV still did not work and that was all the solutions they had. By the way the remote works with the TV off. Played around with the settings on the TV ended up increasing the setting to vivid and the remote worked the rest of the night. So much for the brightness theory. But alas it did not work again this morning. Again the remote works with the TV off. Played around some more and you know when you first turn on the power to the TV you have a blank screen well the remote won't work then either. Although when I turn off and on lights I get a response one way Or another.
The attitude from the last techie is this is the way it is. I seems unfathomable that this is the response change your entertainment center watch a reduced quality picture or too bad.

You are welcome funkyybuda. This seems to be a "hit or miss" problem, some people say turning off the light sensor helps, some say turning off the "vivid" mode on the TV works, some say neither helps, etc. But apparently for some people, changing a setting on the TV really does help, I guess it just depends on your TV brand and model, or perhaps the specific STB you have. Strange.....but glad it worked for you
As to why it works, the Verizon STBs use infrared (IR) for the remote to control the STB. Apparently some TVs generate their own IR signal for certain settings, like vivid or the light sensor, and the Verizon STB sees these signals and this prevents their reacting to the IR signal from the remote. So doing whatever you can to remove the IR from the TV, or reduce it, seems to solve the problem. I wonder why all STBs that use IR, from all manufacturers and used in all systems, don't experience this problem with TVs that generate their own IR. Just one of life's mysteries I guess....
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.0, Build 06.89
Keller, TX 76248

Calendar sync issues with Windows XP, Treo 700p and Outlook 2003

Hi. I have been unable to sync my Calendar (Contacts, Tasks and Memos are fine). I have uninstalled/reinstalled, removed versamail, provided end dates for all of my datebook entries, ran the dbscan, etc. Here is the error I get in my log.
Outlook Calendar synchronization aborted
Duration: 4.1 seconds
Outlook Calendar
OLERR:05-0013
OLERR:05-000F
OLERR:0D-000E
OLERR:0D-0004
OLERR:0D-0001
- Recovery Sync
OLERR:15-0002
OLERR:06-0001
Thanks in advance.
Post relates to: Treo 700p (Verizon)

Forgot to mention two things:
1. Running Palm 6.2, and
2. All the calendar data is on my handheld.
Post relates to: Treo 700p (Verizon)

Treo 800wx and Motorola S9

Similar Messages

Maybe you are looking for