Treo Pro: After establishing Bluetooth connection with laptop, can't connect to P.A.N. Windows XP Pro

I am able to setup a Bluetooth partner ship between my Treo Pro and my laptop without much difficulty. However when I try to establish a PAN connection via My Network Connections, I receive the following Windows error message:
The connection with the Bluetooth network device failed. The device may already be connected to another computer, or it may need to be configured to accept connections from this computer. Consult your device documentation for further information.
Any assistance with this matter would be much appreciated.
Post relates to: Treo 750 (AT&T)

No, that is not what I am referring too. I am way ahead of you there. I can pair my phone to my computer without any difficulties. My computer sees my phone and my phone sees my computer. Here is the route I am referring too; control panel, bluetooth devices, single click on paired Treo Pro, properties button, new window second tab (services), blank screen and no ability to add services. Very similar on the phone itself. For instance, when paired with my Plantronics headset, which by the way is not on the list, but works perfectly, the services box lists "hands free". When connected to the the computer, one of the services should be PAN connection.
Post relates to: Treo Pro T850 (Sprint)

Similar Messages

How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

The Mac and iPhone sync with iTunes though the charge cable that is included with the iPhone. Through this, you can sync your calendars and contacts.
Bluetooth is an impractical sync scheme as the time it would take to say transfer your song catalog could be longer than your phone contract. I suppose it is entirely possible to implement with hacks and jailbreaking, but I am fairly sure it is beyond the rules here to discuss such activities.
You may wan tto ask this same question in the iPhone section of the comminitie here. There may be some workarounds for just contacts.

GX520 hangs after establishing server connection

We are running ZFD 6.5 sp2 and trying to image new GX520's
There are 21 machines all exactley the same down to every last BIOS line,
DELL GX520.
I used the bootcd.iso from SP2
Set up a policy to install an image to any PC booting within a given IP
range.
Here is the issue:
I installed the boot loader on all twenty PC's
7 PC's took the image just fine
14 hung with no error after establishing server connection and the path
to the image.
Zimglog.xlm shows
- <WS DN="R3NWTS01.R3.usnrc">
<Tree>NRC_TREE</Tree>
<Status>Failure</Status>
<ErrorMessage>Workstation failed to restore image as the base image
already exists.</ErrorMessage>
<Operation>Download</Operation>
<ImageType>Base Image</ImageType>
<ImagePath>\\R3NWTS01\NRC\zen-img\train2.zmg</ImagePath>
<Timestamp>Tue Apr 11 12:13:08 2006</Timestamp>
When I try a manual download I get "no eligible partitions to recieve
Image"
Any thoughts?
Thanks
Thomas Magee
US NRC
Network Manager
[email protected]

Tmm3,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Cannot establish Bluetooth connection between iphone4 and ipad2

I have an iphone4 which cannot connect via Bluetoooth with ipad2, even though I tried all that is said in Apple support , but still no success. Really cannot understand as my iphone4 connects to a Bluetooth ear piece which is of different make and these 2 piece's are from Apple but cannot establish a connection via Bluetooth. It's surprising. So please help and advice.
thanks Guys

The iPhone is not designed to Bluetooth pair with a computer or an iPad except for personal hotspot (sharing the phone's cellular internet connection). It can use Bluetooth for Handoff/Continuity and for Keynote Remote but the devices are not paired. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?

How do I pair my Bluetooth Headset with laptop ( Win 8) . Speaker is A2DP supported

Hi - I have a Lenovo T440P and I was able to install my Bose Bluetooth speaker. But it doesn't play through them even though it shows Speakers as the default audio device. I called up Bose and they told me to check and install A2DP bluetooth drivers. Can someone help me get the required drivers. Thanks

Hi Abhitarang1,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue Bluetooth audio on your ThinkPad T440p.
Please check with the below link it might be helpful for your issue.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-connection-problem-in...
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows performed an automatic update. I am now unable to use Firefox. I receive an error message "Firefox can't establish a connection to the server". Windows IE works, Outlook works. What did Microsoft do to me this time?!!!

Windows performed an automatic update on my PC this morning. Now, Firefox does not work other than in SAFE mode. I get "Firefox can't establish a connection to the server..." I downloaded and reinstalled the latest version of Firefox and get the same error message. IE works. MS Outlook works. What did Windows do to me this time?

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

E63 bluetooth pairing with laptop

Hi I am posting for the first time in this forum. I have a E63 set and an inspiron 1440 laptop. I want to pair my phone with my laptop but whn pairing completes, it always says that "all drivers not found" . usually it is the bluetooth modem that is not installed. I am attaching an image; Please refer to it.
thanks.
Attachments:
Capture.JPG ‏36 KB

this is an issue with your drivers not your phone
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Field Explorer is empty after establishing a connection to a SQL 2008 SP

I am trying to create a report using a SQL Server 2008 stored procedure as the source of data using an ADO connection.
The stored procedure is slightly odd, in that its building up the SQL as a string, Below is a snippet of the code to show what I mean. The reason for this is that I need to build up the WHERE clause dependign on user input.
     SELECT @var_query = 'SELECT c_source,
        c_ccy,
        n_quantity,
       a_price,
       d_price,
       a_isd
                     FROM     ldsdbo.lds_testing_filter_data_vw WHERE'
     PRINT @var_query
     EXEC (@var_query)
This runs fine in SQL Server, but when I try and use it in Crystal, the Database Field list is empty.
Does anyone know whats going on, and how I can make this work?
Thanks
Nathan

Well... Now I just feel obligated to reply...
The key(s) to using an SP as your data source is to make sure that your SP does in fact return a single data set.
So... begin by testing it in SSMS. If the following works in SSMS, then it should also work in CR...
EXEC usp_MyStoredProcedure 'ParamValue1', 'PramValue2'
... note: the above example is based on the premise that the SP name is "usp_MyStoredProcedure" and you are tryig two pass 'ParamValue1' & 'PramValue2' as values...
Obviously, you should use the actual SP name and any necessary test values if it has parameters.
Assuming that the SP executes in SSMS AND returns a result set, you should be good to go in CR... Just do as Don mentioned and make sure you are using the NC10 drivers.
If you are still getting stuck, remove the SP from the Database Expert and call the SP from a Command instead. It's easy to do as it allows you to use the exact syntax you used in SSMS. You'll just want to replace any hard coded values with CR parameters... (Just add the parameters to the parameter list of the command and reference them like this...
EXEC usp_MyStoredProcedure '{?Parameter1}', '{?Parameter2}'
HTH,
Jason

Error 720 when establishing VPN connection to RRAS server in Windows 8.1

Hi,
I am unable to establish a VPN connection to my Windows Server 2008 R2 RRAS server. I have tried all protocols, but always getting the same error: "Error 720: A connection to the remote computer could not be established. You might need to change
the network settings for this connection".
I am able to connect using another Windows 7 computer, on the same network and with exactly the same VPN parameters. So this is clearly not a problem with RRAS, the remote router or firewall and/or the local router.
Strangely, the connection works by unchecking IPv4 and checking IPv6 in the connection properties. But I need IPv4 to work. All IPv4 settings are blank, nothing statically configured here.
Note: This is a clean install of Windows 8.1, not an upgrade from a previous version.
Thank you for helping me out!

Hi,
This behavior can occur if your computer and the RAS server don't have a protocol in common, or if RAS is not configured correctly. The error code 720 indicates no PPP control protocols configured.
Assuming the RRAS is using, we need to make the Windows client is running PPTP too. To do this follow these steps:
1. Right click VPN connection, and then click Properties.
2. In the VPN Connection Properties dialog box, click the Networking tab, and make sure you have a protocol that the RAS server runing.
If you don't have a protocol that the RAS server is running, add the needed protocol:
1. Click install, click Protocol, and then click Add;
2. Click the protocol that you need to install, and then click OK.
3. Click Close in the VPN Connection Properties dialog box.
Karen Hu
TechNet Community Support

Contact with laptop, can't boot anymore

I'm crossing my fingers that someone might know how I can get my computer working again. I accidentally sat on the screen of my open laptop which was on my couch and that sent the keyboard swinging up which made hard contact with my elbow to the right of the mousepad. I checked the screen right after and I could move the cursor for a few seconds and then it froze, so I restarted my computer which leaves me at a black screen for maybe half a minute, the Toshiba screen pops up, followed by some code that says something with PCI Family Systems, then I get a boot menu that says:
HDD/SSD
CD/DVD HL-DT-ST-CT30F
FDD
LAN
<Enter BIOS Setup>
My laptop is a Satellite M645 by the way. Any help would be GREATLY appreciated. THANKS!!!

That's not your full model number. It should be on the label on the bottom.
What happens if you pick "HDD/SSD" from the boot menu?
- Peter

After latest update to yosemite I can not open finder or any other windows from my desktop

I can not open any windows after last update to yosemite. Finder can not be reopened. Software version is OS X 10.9.5, Macbook pro mid 2009.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

Bluetooth connection cant establish with N97 mini ...

Hello all,
My N97 mini cant establish bluetooth connectivity with my Laptop(thoshiba A 300- Windows Vista Home prem).
The result same in all cases..like PC suit/Ovi Suit / Normal pairing for sharing files!!
But the device can be connected/paired with any other mobiles for file sharing, hands free etc..
Earlier I failed to connect it with usb cable in my system. but now its working with another desktop (Wind XP)
I formatted my laptop and reinstalled windows ( installed all drivers) .. But again problems same.
NOTE: Bluetooth connection possible to any other devices from my Laptop. The problem ONLY with my N97 mini and Laptop
Does anyone have similar experience as mine?
What should I do to fix this issue?
I am sure my Laptop working 100% normal as I formatted and reinstalled by factory settings.

Thank u for ur advice.
I have done as u mentioned by applying paches on my bluetooth driver and it installed successfully.
But Stil my connectivity problem with my mobile exists as before..
hadimassa wrote:
Check the latest Toshiba Bleutooth drivers.
http://aps2.toshiba-tro.de/bluetooth/?page=download

[Q]Problem with Bluetooth connection between Xiaomi Mi Band and Lenovo P780.

Hello,
I bought Mi Band to my Lenovo P780 and I have connection problem. I have paired both devices and everything works well but 10-20 times a day connection is lost. And after I open Mi Fit, app try to connect with phone and do a sync but it can't (long time: "Connecting... Getting info from your band" and after: "Couldn't connect, pull down to retry."). Only after turning Bluetooth off/on app can connect to phone and do syncing. This is very annoying. Always after night the connection between Mi Band and phone is broken. What can I do about this problem? I need have a real-time notifications on Mi Band so I need have stable connection between phone and band all the time.
I have Lenovo P780 on 4.4.3 and Xiaomi Mi Band on firmware 1.0.9.0 + Tweaked Mi Fit with notify 1.2.922. But I tried also previous versions of Mi Fit - always the same result. And I tried on Nexus5 rom final, official Lenovo KK rom vibe, Alice Project 7.5 and Alice Project 8.0 roms - always the same result.
I tried on 2 other phones and bracelete isn’t broken. Everything is ok – stable connection.
Problem is in Lenovo. What should I do?
Thank you very much.

I have a better experience as my microsoft sculpt touch mouse now works fine - before it was always disconnecting.
Otherwise I have noticed the following with this new update:
- you have to update the bios version too to maximise the improvement
- regarding the special settings of my card, and after lots of test, my best setting is :
Antenna diversity type : 3 (before upgrade of bios, i had no wifi with 3 as value) - it seems it gaves me a slight enhancement
Bandwith: 20_40
Selective suspend : enabled (disabled doesn't change anything)
Selective suspend timeout: 30 (more doesn't change)
Wifi-config: wifi (that's the real trick, if set to Performance, the drop in performance is impressive)
in the meanwhile i was typing that i experienced a slight bluetooth connexion drop... less than before, but it's not totally fixed.
i think alas that the choice of the wifi card is just very bad. I ordered back in 2008 a profesional Dell laptop with a wifi n 2x2 450Mbits minipci. I expected that in 2012-13, an ultrabook without lan connexion and a ssd would at least provide a 2x2 (dual band) 300 Mbits wifi n... but here it's just the cheapest wifi n single band + bluetooth bundle which has been put. The worst is that's an economy of maybe 20€ which is ridiculous on a >1000€ machine.
Once the guarantee has passed, i think i'll upgrade my machine with a decent minipci wifi card and that's all. At least it seems that the dismounting of the Yoga 13 is quite well documented.

Auto-run Application After Bluetooth Connection *solved*

I was wondering if there was a way to immediately run an application after establishing a connection to a specific Bluetooth device.
For example, I have a DualShock 4, and there's an application out there that lets you customize the LED and use the touchpad to control the mouse. I would like it if this application would run as soon as I am connected to this controller. I don't want it to run when I establish a connection to just any Bluetooth device.
Does anybody know of a way I can do this? I'd rather not use cron, since it's a bit slow and this is something that only needs to happen once.
If it matters, I'm using KDE.
Last edited by schmidtbag (2015-02-28 18:50:48)

Try writing a udev rule.
https://wiki.archlinux.org/index.php/Udev
http://www.reactivated.net/writing_udev … ternal-run

IPhone4, OS5, Bluetooth connection in A6 break down

The connection worked with iOS4.x and my Audi A6 (2007). After my Update to iOS5 i can connect, then make a call and durch the first 30 seconds the connection gets lost and cannot be connected again?! I have to reboot both. What can I do?

I fixed mine. After hours of struggle!!!
I turned off Siri from settings. I deleted bluetooth pairing with my car ("forget this device"). I re-established bluetooth connection. I turned Siri back on. All fine (so far).
If this works for the rest of you kindly pass it along to one or two of the other 1000 posts on this issue. People are very frustrated right now. This one is not obvious.
Let me know if it works for you.

Treo Pro: After establishing Bluetooth connection with laptop, can't connect to P.A.N. Windows XP Pro

Similar Messages

Maybe you are looking for