Treo stops responding after phone calls

I can take a call.  Stay on the phone for a few minutes.  Hangup the call and then the phone functionality will not work.  The phone is locked up.  Other menus do work and I can open and close applications.
Post relates to: Treo 800w (Sprint)

The phone function is a built in part of the Operating System on the device and if it stops working after 1 call this would mean there is a problem with the OS on the unit.
I would suggest you hot sync and then do a hard reset on the unit and test the phone again if it works correctly then it could mean there is something that is syncing over to the palm that is corrupting the OS.
If the unit does work after the hard reset you should rename the back up folder normally located in the c:/programfiles/palm or palmone folder then what ever user name you are syncing to and find and rename the back up folder then set the conduits to desktop over handheld for the cal., con., memos, and tasks and sync this should give you all of your data back but no settings or the possible corruption
Post relates to: Treo 650 (Verizon)

Similar Messages

  • DLNA shows up after phone calls

    After every incoming call I get on my Droid X, DLNA pops up.  I don't use DLNA.  But I cannot stop it from popping up which it does without any interaction from me.  Since I cannot delete it from the phone (which I'd like to do) and since it has no settings to configure to stop it from executing, how can I get it to stop loading after phone calls?

    If this is happening on the current software update, there could be a way of clearing it out.  Instead of master resetting the device (also an option if these steps don't work), try clearing the cache on a few related applications. 
    Go to setting> applications> manage applications> all.  Clear cache/data/force stops on the following applications: Dialer, Dialer Storage, DLNA, and Phone.  Remove the battery after doing this. Retest this and see if it resolved the issues with DLNA popping up.  
    If this does not can someone try a master reset (steps) to see if this resolves the issue if the above steps do not?  Please post the results.  I researched this as much as possible, but I haven't noticed a common trend.  
    Thanks for bringing this to our attention, and please follow up with the results. 

  • Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • IPhone apps not resuming after phone call - iOS 7 bug

    iPhone apps not resuming after phone call - iOS 7 bug
    With iOS 6, while playing music on Spotify or playing Candy Crush, etc, if the phone rang and I answered, or if I made a call, once the call was ended, the app I was using would resume. The music would start playing again or the game would resume.
    In iOS 7 this isn't working. Listening to music, I answer a call, music stops and when call is ended, nothing! the phone stays on the phone app.
    anybody else see this behaviour?
    thanks!

    Any ideas anyone?
    thanks

  • TS1702 Numbers stops responding after editing sheet

    Numbers stops responding after editing sheet.  No amount of tapping does anything.  I have to close app and loose edits...
    How do I report a bug?  This is impacting my desire to even use numbers.

    You sound like you really have a good idea on what you are doing .. your steps to isolate the issue are perfectly valid. All I can suggest are a few things I would try and of course these too may not assist at all but at least we will give it a go ..
    FCPX 10.0.6 while not perfect , is a very stable program. I use it fairly frequently and any crashes I see are explainable or at least due in some way to a combination of things I was doing. So the issue is in al probability not a 'DNA - inherent issue with FCPX .. You mention that you did trash the preferences but did you Repair Permissions using te Disk Utility tool ? I would run that .. Create two new folders on the same drive as that of your Final Cut Events and Final Cut Projects .. Call these new folders Hidden Final Cut Events and Hidden Final Cut Projects . Move the contents of FC Events into Hidden FC Events and the contents of FC Projects into Hidden FC Projects. All this will do is hide the events and projects from FCPX at start up and it will create a new event.
    See if any of this helps .. then if not come back .. hopefully others with better ideas will join in and you will get this sorted ..
    Jim

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

    Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

    If Photoshop crashes the should be a System crash report generated by your OS. For example Windows

  • My iPad2 screen stops responding after about 5 mins, can this be fixed?

    My iPad2 screen stops responding after about 5 mins, can this be fixed?

    Have you tried to give it a reboot? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.

  • Admin console stops responding after a while

    We just upgraded to Weblogic 8.1.5 . We are having difficulties with the Administrator console. It stops responding after a while. There is no pattern. The restart seems to fix it but restart is very slow as it takes around 2 min to detect each server. So we have to wait for around 16 min (since we have 8 servers) for it to be operational again.
    Has anyone seen this problem and can suggest a resolution to this problem.
    Thanks
    Pankaj Grover

    I've never seen this and we've been running 8.1.5 for a while. Have you tried dumping threads to see what the admin server is doing? On UNIX, run 'kill -QUIT <admserv_pid>'. Can't remember if/how this can be done on Win32. I believe Console requests use the weblogic.admin.HTTP execute queue and it only has two threads. Could be that something is blocking those threads leading to this.
    I would also look into why your admin server takes 2 minutes to discover your managed servers. That seems unseemly long to me. Mine takes a few seconds at most. Since the Console does cause the admin server to talk to the managed servers, these two things might be related. Maybe you've got some kind of network/DNS lag that could be eliminated.

  • Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import pdf?

    Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import single pdf or multiple pdfs? frequently happens(2/3 times)

    Can you provide any more information about the files that are causing the problems? Are these particularly large files? Many pages or images? Have you opened these files in Photoshop CS5, or other versions of Photoshop?
    What do you see when you try to import these PDFs? Do you get the PDF Import dialog, allowing you to select pages or images from the PDF? Is so, is it hanging when you click OK or at another time?
    Any more details about the problem or other info (as well as sample files) you can provide, the easier it will be for us to help identify the cause of your problems.
    Paul

  • Touchpad stop responding after pressing alt key again start working

    suddenly Touchpad stop responding  after pressing alt key again start working,

    Hello vaibhavpandit, welcome to Lenovo forums!
    Please tell use which model do you use and which operating system.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Skype stops responding after signing in.

    After opening the skype client and then signing in, it immediately stops responding.
    Here is the event log. Could someone tell me what I've done wrong?
    Log Name: Application
    Source: Application Error
    Date: 11/15/2014 12:24:32 AM
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Jonathan-PC
    Description:
    Faulting application name: Skype.exe, version: 6.21.0.104, time stamp: 0x542bca1d
    Faulting module name: Skype.exe, version: 6.21.0.104, time stamp: 0x542bca1d
    Exception code: 0xc0000005
    Fault offset: 0x00b1a18a
    Faulting process id: 0x2644
    Faulting application start time: 0x01d0009465b73cdc
    Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Faulting module path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Report Id: ad476b57-6c87-11e4-802b-4ceb427788f9
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-15T05:24:32.000000000Z" />
    <EventRecordID>2450466</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Jonathan-PC</Computer>
    <Security />
    </System>
    <EventData>
    <Data>Skype.exe</Data>
    <Data>6.21.0.104</Data>
    <Data>542bca1d</Data>
    <Data>Skype.exe</Data>
    <Data>6.21.0.104</Data>
    <Data>542bca1d</Data>
    <Data>c0000005</Data>
    <Data>00b1a18a</Data>
    <Data>2644</Data>
    <Data>01d0009465b73cdc</Data>
    <Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
    <Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
    <Data>ad476b57-6c87-11e4-802b-4ceb427788f9</Data>
    </EventData>
    </Event>

    Try first to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
    Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
    Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

  • Iphone 4 error message while in wifi "safari can not open page because server stopped responding" after iOS6 update

    I am currently using my Iphone 4 in wifi networks only after canceling my cell phone plan. Over the weekend I did the IOS6 update on the iphone as well as updated my macbooks itunes and OS X operating systems updates that were available.  Since that my iphone's safara app won't connect.  After it trys to connect for a minute or 2 I recieve the message: "safari can not open page because server stopped responding".  However ALL other apps that require the phone to be connected to wifi for use work properly, i.e app store, imessage, pinger, facebook, etc.  I have checked all network setting and they looked right to me.  Anything I'm missing, ideas to try, or am I sol (lol)?  Safari worked perfectly before the update so I thought I might have done something wrong or forgot to change some type of setting.
    Thank you!

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • ALOM stop responding after reboot system

    Server info: SunOS 5.9 Generic_118558-08 sun4u sparc SUNW,Netra-440
    ALOM version is 1.6.7 and OBP version is 4.22.33
    Problem:
    After reboot system, ALOM die
    found errors in /var/adm/messages
    Jan 13 07:04:08 rmclomv: [ID 951689 kern.warning] WARNING: DP_GET_SDP_VERSION failed, ret=4
    Jan 13 07:09:53 rmclomv: [ID 647266 kern.warning] WARNING: SC has stopped responding
    Jan 13 08:42:33 rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
    Run OS command ./scadm version
    scadm: The SC hardware could not be initialized.
    Can not connect ALOM through NET MGT and SERIAL PORT.
    Run ./ssptest -vn
    01/13/09 20:04:04 SunVTS5.1ps10: VTSID 0 ssptest.VERBOSE alom: "ssptest: Started."
    01/13/09 20:04:14 SunVTS5.1ps10: VTSID 8025 ssptest.load_rsc_libs.FATAL alom: "Call to rsc_init() failed. Error Code: Interrupted system call." Probable_Cause(s): <The RSC/ALOM is not accepting input and may be hung.> Recommended_Action(s): <Check the RSC/ALOM using rscadm/scadm and reset the RSC/ALOM if required.>
    01/13/09 20:04:14 SunVTS5.1ps10: VTSID 5 ssptest.clean_up.VERBOSE alom: Starting Test: cleanup
    01/13/09 20:04:14 SunVTS5.1ps10: VTSID 6 ssptest.clean_up.VERBOSE alom: Exiting Test: cleanup
    The only way to recover it is Power-off the system, then power-on again.
    Don't know what's wrong, why this happened?
    Hope you can help me to analyze it. I'm appreciating for your help

    El mismo problema.
    # prtdiag -v | grep "MB/SC"
    MB/SC faulty
    # uname -a
    SunOS hera 5.9 Generic_122300-09 sun4u sparc SUNW,Sun-Fire-V240
    # scadm loghistory
    scadm: The SC hardware could not be initialized.
    # scadm show
    scadm: The SC hardware could not be initialized.
    # scadm version -v
    scadm: The SC hardware could not be initialized.
    /var/adm root@hera # egrep responding messages*
    messages:Jul 16 18:49:42 hera rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
    messages:Jul 22 17:26:38 hera sshd[24909]: [ID 800047 auth.crit] fatal: Monitor not responding
    messages:Jul 22 17:55:46 hera rmclomv: [ID 647266 kern.warning] WARNING: SC is not responding
    Se cicla en la consola serial:
    ALOM - POST run incomplete previously, no POST this time
    ALOM BOOTMON v1.4.0
    ALOM Build Release: 006
    Reset register: f0000000 EHRS ESRS LLRS SWRS
    Check for Handshake
    Returned from Boot Monitor and Handshake
    Clearing Memory Cells
    Memory Clean Complete
    Loading the runtime image...
    JRobles - itch.edu.mx

  • Resume streaming audio by using MPMoviePlayerViewController after phone call is ended

    Hello,
    I am implementing an universal app. In which I used MPMoviePlayerViewController for playing streaming audio and its working fine. But when there is call during playing the streaming audio it stops. I also posted a question on Stack Overflow but no output (http://stackoverflow.com/questions/16333501/resume-mpmovieplayerviewcontroller-a fter-ending-phone-call/16333616?noredirect=1#comment23431276_16333616). How can I resume streaming audio after call is ended. Is there any way so that I can achieve this? Please help me out.

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    BTW this is the iPOd touch forum

Maybe you are looking for

  • Connected my macbook pro to monitor but everything is purple on the monitor

    I connected my laptop to a monitor but everything is purple on my monitor. any ideas? thanks

  • Fails to start: Registry file failure

    Hi, When I switch on the system (T61 thinkpad 7658 model)  It gives the following message  Stop: C0000218 Registery file failure The registry cannot load the hive(file): \Systemroot\System32\Config\SAM  It is corrupt or not writable or non existent 

  • Flex Project Management

    Hi, I am planning to build a flex project with a small group of people. So, I am thinking to have one main project to load all the component (SWF) in swf loader, so that I can have the component to be distributed to everyone. Here I want to ask: 1. B

  • Jsp.parse.JspParseException

    Hi, I am using JDeveloper 3.2 to develop a develop a JSP application. I trying to get records to display on a custom screen layout. The first record is displayed. However, I get the following error message when I use the Navigation Bar to go to the n

  • 2 Layout

    Hi, I am facing problem to make a report with 2 layout.please solve this. How to make a report with 2 layout?what is the process? Thanks