Treo650 Windows 7 sync install problems

I just got a used Treo 650 to replace my 600 which died.
My PC is running windows 7
I use Outlook 2003
Palm Desktop v4.1.4 that came with the treo works fine with outlook but the quickinstall won't work. It refuses to even run.
I upgraded to Desktop v6.2.2 That one allows me to install stuff (I think) but it won't talk to outlook.
Is there a way to go back to desktop 4.1.4 and install software etc on the treo via some other means.
Post relates to: Treo 650 (Unlocked GSM)

Interestingly I have install Windows7 Ultimate from an upgrade (not a clean install) on my X500-02M. Now it enjoys nothing better than loocking up every 20 or 30 minutes. I have made sure there are no viruses and run "Registery Patrol" on the computer but it is still very unstable. It also is actually more unstable doing simple things like doing word docs, project programs & emails than if running a game.
So while I have all my Toshiba software my Qosmio runs like a dog.
Toshiba suggested (no surprise here) resetting the system. Seems to me an easy answer but this is not the 1st X500 02M that has done this the first became so bad it is now back with its makers. The system seems to be inherantly unstable (much like some of the old satelites but without the blue screen of death)
While I do recomend going back to the original Toshiba software (notebooks are like that) I do not recoment getting a Windows 7 ultimate upgrade pack until Toshiba makes it as the standard one seems not to work too well.
Regards

Similar Messages

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

Windows Mail Sync popup problem?

For some reason, I keep getting "WindowsMailSync has stopped working" (popup) everytime I select the a tab or sync using iTunes. This is since a costly and disappointing attempt to use Outlook 2007 to sync my calendar. I have uninstalled Outlook 2007, but this problem persists. Suggestions...?

This happed to me after installing Office 2007 (and Outlook). "WindowsMailSync Stopped working" would pop up, these were the steps that I took to resove the issue:
Go to the info tab for you iPhone in iTunes.
Look at the Mail Accounts section. Where it says "Sync Selected Mail Accounts."
Check the box if the drop down menu is grayed out and click on the drop down menu.
If you are running Outlook and it still says Windows Mail that could be creating a conflict.
Switch it to Outlook (or if you are running another default mail system that is supported by iTunes switch it to that instead). You may want to check all of your other selections as well.
I don't sync my mail via iTunes, so I unchecked it before syncing.
Message was edited by: Rhino Chaser

OCS Windows Single Box Install problem

When installing the 9iAS Infrastructure portion of the single-tier install on Windows, we're seeing that the DBCA for the Infrastructure database will hang as soon as it starts. Any ideas why?
Originally, we thought that the problem lied with multiple CPUs, but we found an article to force a single-CPU install, and it went fine. Note that the Information Storage DBCA ran fine earlier in the install.
Thanks!

Another possibility if you're not running Windows 2000 Advanced Server... Windows splits available memory half and half toward kernel and user processes.
That means, if you have a 1G server, only 500M is available for OCS.
If you have a 2G server, only 1G is available for user processes.
Advanced Server lets you add a /3GB switch in the boot.ini file, check Metalink. That splits 4G into 3G for user processes and 1G for the kernel.
I ran into a similar problem as you describe on my XP Pro PC at home, I have 1G of RAM but DBCA fails (protocol error), then when it backs out of the installation for the DBCA components it also wipes out the database service.
I didn't check whether it also wipes out the oradata files, it may do that if installation of a database is unsuccessful.
I may try grabbing copies of those, the init.ora file, and back out of the ocs store db installation, then rebuild manually, test, and retry the other components.
It would be nice if we could do this step manually.
I am so desperate to make the singlebox install work that I am going to try the /3GB switch on my PC when I go home tonight... If that doesn't work I have RHAS 2.1 coming in the mail soon, I ordered it last week.

Windows Server 2012R2 Install problems

I am trying to install Server 2012 R2 on a Dell Power Edge 830 with 8 GB of RAM and 2 RAID 1 arrays #1 = 374 and #2 = 474. When I boot with the DVD in the drive it goes thru the normal stuff then it comes up with a Windows boot manager error "Windows
failed to start. A recent hardware or software change might be the cause" Then it lists the normal fixes "File: \windows\system32\config\system" "Status: 0xc0000001. Then it says hit enter for OS selection when you proceed it then brings
up only one choice of operating systems "Windows Setup [EMS Enabled]" or press F8 for advanced options but when you press F8 it just takes you back to the same error screen and if you select the Windows setup option it then takes you back to the
same error screen. I understand that I probably need to disable driver signature but I'm not sure how to do that with F8 not working any ideas?

I had a similar issue with my r940, it has to do with the dvd drive I finally got it to install by faking it, I removed the hard drive and put into another computer that would boot from DVD it was a desktop computer did the install up to the
first reboot, when it requests the first reboot it hasn't really done anything except initialize the disk and install the OS image form the DVD. So remove the drive and put in the 830 server and boot and complete the OS install. it will do all the hardware
detection after the boot.

Qosmio X500-106 - Windows 7 clean install problems

Hi
Recently purchased a Toshiba X500-106
and it came with Windows 7 Home Premium,
I purchased Windows 7 Ultimate as I wanted to use
Bit-Locker.
When I installed Windows 7 Ultimate OS I started my Laptop up and found that all original software was gone.
Of course, but Now the screen is dark and the Graphics aren't right as I tried to run Solitaire and it said "Graphics not hardware accelerated".
I then checked my system rating and found that My graphics was rated as "1.0"; and I can't watch any DVDs or blu-ray films, I keep trying to find a way to change the video setting but to no avail!
Is it worth me restoring the HDD to Factory Spec?
I'm not happy that it just looks bad, do I need the original software to change the settings?
I've installed all relevant divers and software from NVIDIA and Toshiba but it's not working!
What is my best option? Clean install again?
Restore HDD to factory spec?
Any help massively appreciated

Interestingly I have install Windows7 Ultimate from an upgrade (not a clean install) on my X500-02M. Now it enjoys nothing better than loocking up every 20 or 30 minutes. I have made sure there are no viruses and run "Registery Patrol" on the computer but it is still very unstable. It also is actually more unstable doing simple things like doing word docs, project programs & emails than if running a game.
So while I have all my Toshiba software my Qosmio runs like a dog.
Toshiba suggested (no surprise here) resetting the system. Seems to me an easy answer but this is not the 1st X500 02M that has done this the first became so bad it is now back with its makers. The system seems to be inherantly unstable (much like some of the old satelites but without the blue screen of death)
While I do recomend going back to the original Toshiba software (notebooks are like that) I do not recoment getting a Windows 7 ultimate upgrade pack until Toshiba makes it as the standard one seems not to work too well.
Regards

Toshiba Satellite L305-S5883 Windows 7 clean install problem

I just got a new 500gb Seagate HDD (yuck, but they were on sale). I try to do a fresh install of windows 7 with the drive plugged in and it gets to unpacking 1% and then has an error and wont detect the hard drive until I restart the laptop. I figure that I got a bad hard drive or windows disk so I try another windows disk and the same thing. So I figure ill try the hard drive in another system. I pop it in with the first disk and it installs fine. I don't really know what would cause this, the toshiba has the latest bios. On another note I also tried XP install disk and that didnt even see a hard drive.

I suspect it's a variation of this situation.
The RTM version of Windows 7's installation package does not handle the new advanced-format drives.
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Wind...
-Jerry

K9A - Windows XP Patch Install Problem

New PC :
MSI K9A Mainboard
AMD X2 5200+ AM2
2 GB RAM MDT 800
WD SATA 320 GB
650 W Bequiet
ATI 1950 XTX
1. installed Windows - after it SP2
2. All Driver Mainboard Graphics sound etc.
3. System runs find
Now online Windows updates - about 68 Patches
- Ok download
Install all - reboot ! Now I see the Windows load bar and
then after 30 sec the screen turned black and reboot automatically
Tried it a few times - nothing happens - reboot all times
The Last well-known function: same - black reboot.
I thought the first time it would be because of software, which we installed but the second time we installed windows only with SP2 and drivers SP2 and then the Patches - we got the same phenomenon
Now we selected simply the first 7 Patches - Same phenomenon….
Any ideas ?

Quote from: Dormelchen on 09-February-07, 22:27:17
i want to destroy something
Get a stress Ball it helps me
Also check hard drive for errors or bad sectors

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Is Blackberry going to support syncing Installed Outlook 2013 + using Windows 8 +?

There are many threads and posts about the fact that Blackberry does not currently (April 2015) support syncing contacts and calendar items from Outllook 2013 (installed version at least). My experience with this is with Windows 8.1.
I can copy my .PST files to my laptop which run Windows 7 and Outlook 2010 and it syncs fine there.
I have the same current release of Desktop Software which installs Link for Windows 1.2.4. on both machines.
I would like some daylight on this issue. Does Blackberry intend to support this or not? I really like my Passport but IT IS MANDATORY THAT I BE ABLE TO SYNC MY OUTLOOK. I am a consultant and not on a corporate exchange service. Cleints send me invites to meetings etc. which populate my Desktop Outlook. I must be able to sync those and the contacts with my Blackberry Passport.
The Windows phones sync with Outlook just fine and in fact have an Outlook application installed. I am thinking about switching.

Well, I can't speak to your concerns about BB Management, nor about your desire for them to respond here. While they to from time to time post here, it's rare and should never be expected...the charter of this site is clear about what to expect.
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
You had asked specifically about PC-based synchronization, this might be of use:
http://docs.blackberry.com/en/smartphone_users/deliverables/60798/tom1359418099212.jsp
I do not know if that matches your configuration or not, but that's the official information we have available.
You did not originally ask about OTA sync, which is why I did not address that...but that indeed does work...refer:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/How-To-OTA-Sync-BB10-and-non...
There are I am sure many other threads that might be of interest to you, so a few minutes searching might reveal information that you desire. You might even find someone else with your exact configuration, and has it working...I don't know, for I shifted to OTA sync exclusively (I use both Hotmail as well as GMail for contacts and calendar).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

Go into your system preferences and click the startup disk icon then select your Mac HD.

Installing Windows 10 with Bootcamp problem?

I've been trying to install Windows 10 Technical Preview for a while now jumping through loads of hoops with no luck. Keep in mind that I've had various versions of windows and ubuntu on both of my SSDs in the past.
Here's a look at my set up:
Macbook Pro mid 2012
Two 256GB SSD's
32GB Flash drive
Windows 10 iso from microsoft
I have tried to make the USB from Bootcamp, then install through bootcamp. It formats the SSD, then restarts the computer. Although, the computer boots up into a black screen with a blinking underscore. If I hold option, I see two options from the USB. "Windows" and "EFI Boot" If I press the Windows partition on the USB from the boot selection, I get back to the black screen with a blinking underscore. If I press the "EFI Boot" option, it brings me to the normal set up screen. After I click advanced setup, and click my drive to install, I can't click the next button. Of course I format the drive, but still no luck. It comes up with an error saying that the drive is an MBR format and needs to be in GPT. ("The selected disk has an MBR partition table. On EFI systems, Windows can only installed on GPT disks.") I tried going through the repair option and going into the command prompt while typing the "Bootrec.exe /Fixboot" without any luck of it fixing the issue. I also tried making the USB drive through windows and back onto my Mac, no luck either. Currently I'm downloading a Windows 8.1 iso to see if I can install this, then upgrade through bootcamp. Only problem is that this will take a while. Do any of you guys have any suggestions I might have missed? I'll update this constantly with how the windows 8 install then upgrade goes, but until then, what do you guys think?

I solved my issue. The method I used was a combination of other methods I found on the internet.
1.) Went back into Mac os X and opened Disk Utility
2.) Clicked on my SSD I was going to install windows onto
3.) Went to the partition tab and selected one partition, then changed the format to free space and hit apply
4.) I booted back into the windows installation EFI
5.) Got back to the part where you choose your drive still getting an error
6.) I then hit "Shift + F10" to open command prompt, and typed this in:
"diskpart"
Found my drive by typing "list disk" (In my case, it was Disk 0)
"Select disk 0" (Or what ever your drive is, probably 0)
"clean all" Let it sit and do it's job for about 15 minutes
Closed command prompt, still might give an error
7.) Restarted computer and went back into the EFI installation
8.) Allowed me to format, then hit next like normal!
Everything is working fine for me after installing the Bootcamp drivers except for audio. I've tried installing it through the compatibility options, still nothing. Do any of you guys know any way to fix the audio issue with Windows 10?

Oracle 9i install problem in Windows XP under Virtual PC

Let me start by saying, I apologize for this. I know 9i is deprecated, but it is the only liensed copy of Oracle we have. I can get it to install under Windows XP with no problems at all. However, when I try the same install in a virtualized XP environment I get the following. Any help would be greatly appreciated. Thanks in Advance.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xce02c7d
Function name=(N/A)
Library=C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\SID_Queries.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at W32LocateSidNative.w32LocateSidHome(Native Method)
     at getAllOracleHomes.performQuery(getAllOracleHomes.java:39)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2330)
     at Components.oracle.emprod.oemagent.agentca.v9_2_0_1_0.CompContext.getCalculatedValueObject_PRE_REQUISITE(Unknown Source)
     at Components.oracle.emprod.oemagent.agentca.v9_2_0_1_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:612)
     at oracle.sysman.oii.oiis.OiisPreRequisiteVar.getCalculatedValue(OiisPreRequisiteVar.java:138)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:1353)
     at oracle.sysman.oii.oiis.OiisCompInstallation.getPreRequisite(OiisCompInstallation.java:683)
     at oracle.sysman.oii.oiis.OiisCompInstallation.getContext(OiisCompInstallation.java:368)
     at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java:4496)
     at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.applySelection(OiiodDepEngine.java:2793)
     at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java:2369)
     at oracle.sysman.oii.oiif.oiifw.OiifwPostDepModesWCCE.doOperation(OiifwPostDepModesWCCE.java:327)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
     at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:339)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:586)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:177)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:358)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:637)
Dynamic libraries:
0x00400000 - 0x00405000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\javaw.exe
0x7C900000 - 0x7C9B2000      C:\WINNT\system32\ntdll.dll
0x7C800000 - 0x7C8F6000      C:\WINNT\system32\kernel32.dll
0x77DD0000 - 0x77E6B000      C:\WINNT\system32\ADVAPI32.dll
0x77E70000 - 0x77F02000      C:\WINNT\system32\RPCRT4.dll
0x77FE0000 - 0x77FF1000      C:\WINNT\system32\Secur32.dll
0x7E410000 - 0x7E4A1000      C:\WINNT\system32\USER32.dll
0x77F10000 - 0x77F59000      C:\WINNT\system32\GDI32.dll
0x77C10000 - 0x77C68000      C:\WINNT\system32\MSVCRT.dll
0x76390000 - 0x763AD000      C:\WINNT\system32\IMM32.DLL
0x6D420000 - 0x6D4EE000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\hotspot\jvm.dll
0x76B40000 - 0x76B6D000      C:\WINNT\system32\WINMM.dll
0x5DAC0000 - 0x5DAC8000      C:\WINNT\system32\rdpsnd.dll
0x76360000 - 0x76370000      C:\WINNT\system32\WINSTA.dll
0x5B860000 - 0x5B8B5000      C:\WINNT\system32\NETAPI32.dll
0x76BF0000 - 0x76BFB000      C:\WINNT\system32\PSAPI.DLL
0x6D220000 - 0x6D227000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\verify.dll
0x6D250000 - 0x6D266000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\java.dll
0x6D3C0000 - 0x6D3CD000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\zip.dll
0x6D020000 - 0x6D128000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\awt.dll
0x73000000 - 0x73026000      C:\WINNT\system32\WINSPOOL.DRV
0x774E0000 - 0x7761D000      C:\WINNT\system32\ole32.dll
0x5AD70000 - 0x5ADA8000      C:\WINNT\system32\uxtheme.dll
0x6D1E0000 - 0x6D21B000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\fontmanager.dll
0x74720000 - 0x7476C000      C:\WINNT\system32\MSCTF.dll
0x755C0000 - 0x755EE000      C:\WINNT\system32\msctfime.ime
0x10000000 - 0x1001E000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\JavaAccessBridge.dll
0x6D2C0000 - 0x6D2DB000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\jre\bin\jpeg.dll
0x0B6D0000 - 0x0B6E5000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\oui\bin\win32\oraInstaller.dll
0x0B120000 - 0x0B129000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\dbwsec.dll
0x0B140000 - 0x0B146000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\orawsec9.dll
0x0BB30000 - 0x0BB54000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\WinPrereq.dll
0x0BC30000 - 0x0BC3C000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\Win32Env.dll
0x0C9E0000 - 0x0C9EF000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\w32RegQueries152.dll
0x0CE00000 - 0x0CE1B000      C:\Documents and Settings\Administrator\Local Settings\Temp\OraInstall2010-06-25_08-04-15AM\SID_Queries.dll
0x76C90000 - 0x76CB8000      C:\WINNT\system32\imagehlp.dll
0x59A60000 - 0x59B01000      C:\WINNT\system32\DBGHELP.dll
0x77C00000 - 0x77C08000      C:\WINNT\system32\VERSION.dll
Local Time = Fri Jun 25 08:05:24 2010
Elapsed Time = 37
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
#

More information. Forgot to say that this 9.2.0.1 of 9i and occurs at 36% complete during the Pre-Requisites checking.
Edited by: user13324204 on Jun 25, 2010 9:45 AM

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

I downloaded Adobe air and the desktop app for story and can get online from that. Thanks anyway. T

Treo650 Windows 7 sync install problems

Similar Messages

Maybe you are looking for