Treo800w does not use the ringer volume I have set

I have my 'Phone: Known Caller' ringer setting set to the standard Treo ring tone that came preinstalled on the Treo800w. I have the 'Ring type' set to Ring but NO matter how high or low I set the ringer volume it only rings at the lowest volume setting when a call comes in. It's so low that I basicly miss every call. I have tried changing to other ring tones and the same thing happens. The ringer seems to work correctly when the Ring type is set to 'Increasing Ring' but that starts out so low that it does not increase the ring volume enough before the call goes to voicemail. I need my ringer to use a relatively high ring tone volume setting.Has anyone else experienced this? If so, what did you do to resolve it?
Post relates to: Treo 800w (Sprint)
This question was solved.
View Solution.

I got a response to this from Paulcalif in another thread: "Have you tried "rebooting" by removing the battery and putting it back in. Try setting the volume all the way up first, then reboot it."
Lil Red: This seems to have worked although I still think there is a bug in the software. If I set the ringer volume to a different volume level the phone does not seem to respond. Oh well, as long as it rings loud then for the most part i'm good to go.
Post relates to: Treo 800w (Sprint)

Similar Messages

Ical settings does not use the calendar which I have set as standard

and when I receive invitations via mail ICal enters the event under a different calendar (which I don't use)

I got a response to this from Paulcalif in another thread: "Have you tried "rebooting" by removing the battery and putting it back in. Try setting the volume all the way up first, then reboot it."
Lil Red: This seems to have worked although I still think there is a bug in the software. If I set the ringer volume to a different volume level the phone does not seem to respond. Oh well, as long as it rings loud then for the most part i'm good to go.
Post relates to: Treo 800w (Sprint)

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc has been generated, but I don't want to do this.

What application are you running? Please ask this in the forum of the product you're using.

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

After i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

I have an iphone 5 and he thinks that the speakers and headphones it does not give the maximum volume!

why does he think that?

HT5225 "This disc does not use the GUID Partition Table Scheme...". I keep getting this message when I try to install OSXLion. It has something to do with a repair Apple performed last year. I use a 17" MacBookPro. Any suggestions?

"This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.

When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Is there a way to purchase an app from the App store but not use the money I currently have in my iTunes account from a gift card?

Is there a way to purchase an app from the App store but not use the money I currently have in my iTunes account from a gift card?

The only way I know is to purchase it as a gift.

HT201304 I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and Not credit card, so does it mean I can't use iTunes .?

I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and Not credit card, so does it mean I can't use iTunes .?

I believe if you haven't already setup an itunes account, if you have access to computer with iTunes installed , you can create an iTunes account on that computer with no credit/debit card and then just buy iTunes cards at your local retailer to get credits.

New MySites does not use the specified permissions

I've changed the MySite Settings in Central Admin so that only my AD group called "DOMAIN\All employees" is added to the Read Permission Level setting. I've removed "All" and "All Windows".
Now users create MySites, and at first the permissions seems right. When I check top level permission on new mysite, only the user and the group "DOMAIN\All employees" is present in the list.
The problem is that the folder "Shared with everyone" and the lists "Social" and "Microfeed" does not get the correct permissions. When I check the permissions (since they have unique permissions) I can see that it is the claim
"All" that has access, not my "DOMAIN\All employees" group.
This means that the documents added to the "Shared with everyone" is available for all users, not only my employees. The same is for content in the social lists, the elements are visible in search results for all users.
Does anyone know how I can change the default permissions of the folder and the two lists that does not inherit permissions from the root web of the mysite?
Regards ElinK
ElinK

Hi
ElinK,
There is no out of the box way to accomplish this with SharePoint
As you had said, one way is that we can use the code to change the MySite list permission for the existed MySite.
Another way is that we can create MySite programmatically, break inheritance and add unique permission to List.
There are some articles for your reference.
http://social.technet.microsoft.com/wiki/contents/articles/18788.sharepoint-2013-programmatically-create-mysites-for-all-users-of-a-group.aspx
http://blog.sharepointclick.com/2013/04/programatically-breaking-inheritance.html
http://www.thespgeek.com/2011/08/assigning-sharepoint-list-item-level.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Adobe After Effects, Premiere and Encoder does not use the GPU (CUDA) ?

Please! Explain me. Why? Adobe After Effects, Premiere and Encoder does not use GPU (CUDA) ?
Everytime i have GPU Load from 0 to 10% !!! (GeForce GTX 970) And also my CPU load is not full. Any suggestions?

seg.48162731 wrote:
At the moment i use AE, AP and ME CC 2014 8.2 with the latest updates. I have GTX 970 and AMD 8350. What's my problem?
Which chipset is on your system's motherboard? Which motherboard is your PC equipped with?
If the motherboard is using an AMD 790 or 970 series chipset, the HyperTransport bus will be running at a reduced speed, and thus the CPU performance will be worse than a quad-core Intel i5 CPU without hyperthreading. In many instances, this means that the GPU will be laying idle, waiting for the CPU to catch up.
If on the other hand the motherboard uses an AMD 990FX chipset, then it's likely that there is something else bottlenecking your PC.

I am trying to connect to a network using a Linksys PLEBR10 usb "powerline" device. My MacBook Pro does not "see" the device. Anyone have a solution?

I am trying to connect a MacBook Pro to a network using a Linksys PLEBR10 USB ethernet adapter. The MacBook does not recognize the USB device nor the network behind it.
Anyone have a solution?
Thanks
AJB

Contact Linksys or post in their forum area.

Treo800w does not use the ringer volume I have set

Similar Messages

Maybe you are looking for